Add version info to lttng-tracer.ko modinfo

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Version 2.4.0-rc2

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: client_packet_header() uses wrong packet

It should use lib_ring_buffer_read_offset_address() to get the packet
being read, rather than lib_ring_buffer_offset_address(), which is only
meant to be used when writing to the packet.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Cleanup: fix typo in ring buffer backend comment

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: handle unknown event type parameter

Skip to an error path if the event type is unknown.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: eliminate timestamp overlap between packets

By using the timestamp sampled at space reservation when the packet is
being filled as "end timestamp" for a packet, we can ensure there is no
overlap between packet timestamp ranges, so that packet timestamp end <=
following packets timestamp begin.

Overlap between consecutive packets becomes an issue when the end
timestamp of a packet is greater than the end timestamp of a following
packet, IOW a packet completely contains the timestamp range of a
following packet.  This kind of situation does not allow trace viewers
to do binary search within the packet timestamps. This kind of situation
will typically never occur if packets are significantly larger than
event size, but this fix ensures it can never even theoretically happen.

The only case where packets can still theoretically overlap is if they
have equal begin and end timestamps, which is valid.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

gcc blacklist: only apply when building with gcc

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Blacklist ARM gcc 4.8.0, 4.8.1, 4.8.2

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Version 2.4.0-rc1

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update ext4 instrumentation to Linux 3.12

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update RCU instrumentation to Linux 3.12

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update btrfs instrumentation to 3.12 kernel

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update vmscan instrumentation to Linux 3.12

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

update: kmem instrumentation 3.12 kernel support

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

lttng-statedump-impl: Use generic hard irqs for Linux >= 3.12

Quoting the original patch changelog from Otavio Salvador:

> The Linux kernel 3.12 uses the generic hard irqs system for all
> architectures and dropped the GENERIC_HARDIRQ option, as can be seen
> at the commit quoted below:
>
> ,----
> | commit 0244ad004a54e39308d495fee0a2e637f8b5c317
> | Author: Martin Schwidefsky <schwidefsky@de.ibm.com>
> | Date:   Fri Aug 30 09:39:53 2013 +0200
> |
> |     Remove GENERIC_HARDIRQ config option
> |
> |     After the last architecture switched to generic hard irqs the config
> |     options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
> |     for !CONFIG_GENERIC_HARDIRQS can be removed.
> |
> |     Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
> `----

Introduce wrapper/irq.h to move the feature availability testing logic
into a specific wrapper header. It now tests if the kernel version is
>= 3.12 or if CONFIG_GENERIC_HARDIRQS is defined (for older kernels).
Introduce the lttng-specific CONFIG_LTTNG_HAS_LIST_IRQ to track
availability of this feature within LTTng.

Reported-by: Philippe Mangaud <r49081@freescale.com>
Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

lttng-statedump-impl: Fix lttng_list_interrupts for empty implementation

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Import fix from LTSI: 3.4+ RT kernels use CONFIG_PREEMPT_RT_FULL

Initial LTSI commit:

From: Paul Gortmaker <paul.gortmaker@windriver.com>
> fix reference to obsolete RT Kconfig variable.
>
> The preempt-rt patches no longer use CONFIG_PREEMPT_RT in
> the 3.4 (and newer) versions.  So even though LTSI doesn't
> include RT, having this define present can lead to an easy
> to overlook bug for anyone who does try to layer RT onto
> the LTSI baseline.
>
> Update it to use the currently used define name by RT.
>
> Reported-by: Jim Somerville <Jim.Somerville@windriver.com>
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Merged with kernel version checks for >= 3.4 to support both old and
newer kernels.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add new tracepoint in KVM

New tracepoint added in kvm: kvm_write_tsc_offset.

Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Blacklist kernels 3.10.13 and 3.11.2

It looks like my guessing on kernel version at which Greg will pull this
fix was wrong. It will probably appear in the next round of stable
releases.

The fix that needs to reach stable-3.10 and stable-3.11 before we can
remove those from the backlist:

commit 7bd36014460f793c19e7d6c94dab67b0afcfcb7f
Author: John Stultz <john.stultz@linaro.org>
Date:   Wed Sep 11 16:50:56 2013 -0700

    timekeeping: Fix HRTICK related deadlock from ntp lock changes

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: John Stultz <john.stultz@linaro.org>

LTTng trace-clock: shrink kernel blacklist

The lockup fix has been pulled into Linux master as:

commit 7bd36014460f793c19e7d6c94dab67b0afcfcb7f
Author: John Stultz <john.stultz@linaro.org>
Date:   Wed Sep 11 16:50:56 2013 -0700

    timekeeping: Fix HRTICK related deadlock from ntp lock changes

Guessing the stable kernel versions in which this fix will appear in
3.10 and 3.11 stable. 3.12+ are OK.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>

Metadata flush writes data from the cache

When doing a flush on a metadata stream we first check if we can fill
the current subbuffer with data from the cache before doing the actual
flush.

Signed-off-by: Julien Desfossez <jdesfossez@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Per-stream ioctl to get the current timestamp

Signed-off-by: Julien Desfossez <jdesfossez@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

LTTng ringbuffer ABI calls for index generation

These new calls export the data required for the consumer to generate
the index while tracing :
- timestamp begin
- timestamp end
- events discarded
- context size
- packet size
- stream id

Signed-off-by: Julien Desfossez <jdesfossez@efficios.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Prepare LTTng override of ring buffer fops

This patch allows LTTng to override the file operations of the lib ring
buffer.
For now it does not provide any additional functions, but it prepares
the work of adding LTTng-specific ioctls to the ring buffer.

Signed-off-by: Julien Desfossez <jdesfossez@efficios.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Blacklist Linux kernels 3.10+

Linux kernels 3.10 and 3.11 introduce a deadlock in the timekeeping
subsystem. See
http://lkml.kernel.org/r/1378943457-27314-1-git-send-email-john.stultz@linaro.org
for details. Awaiting patch merge into Linux master, stable-3.10 and
stable-3.11 for fine-grained kernel version blacklisting.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Version 2.3.0

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: metadata stream should not reference session

The metadata stream should only reference the metadata cache, not the
session. Otherwise, we end up in a catch 22 situation:

- Stream POLLHUP is only given when the session is destroyed, but,
- The session is only destroyed when all references to session are
  released, including references from channels, but,
- If the metadata stream holds a reference on the metadata session, we
  end up with a circular dependency loop.

Fix this by making sure the metadata stream does not use any of the
lttng channel nor lttng session.

Reviewed-by: Julien Desfossez <jdesfossez@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: btrfs: support 3.11 Linux kernel

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

statedump: remove KERN_DEBUG messages

They appear to be shown by default in dmesg of many distributions, and
they don't add much value (noisy).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: ext4: add missing tracepoints for 3.11 kernel

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: ext4: Linux 3.11 support

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: ext3: 3.11 Linux support

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: statedump nsproxy 3.11 Linux support

Follow upstream Linux change introduced by:

commit c2b1df2eb42978073ec27c99cc199d20ae48b849
Author: Andy Lutomirski <luto@amacapital.net>
Date:   Thu Aug 22 11:39:16 2013 -0700

    Rename nsproxy.pid_ns to nsproxy.pid_ns_for_children

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Version 2.3.0-rc2

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: metadata lttng channel refcount

The OOPS at bug #622 is likely caused by a missing reference on the
lttng channel structure, which could lead to accessing the object after
it has been destroyed if the lttng channel file descriptor is closed
while the metadata stream fd is still in use.

Fixes #622

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Julien Desfossez <jdesfossez@efficios.com>

README: lttng-modules incompatible with lttng 0.x patchset

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Version 2.3.0-rc1

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: kvm x86 probes side-effect

ccflags-y += -I$(kvm_path)

was causing the lttng-ftrace probe to misbehave.

Fixes #591

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: allow get/put subbuf in loop for metadata stream

data_pending check can trigger the following sequence:

- get_next_subbuf
- put_subbuf
- get_next_subbuf
- put_subbuf
- get_next_subbuf
- put_subbuf
...

and then finally a thread would consume the data:

- get_next_subbuf
- put_next_subbuf

However, we don't want to populate data from the metadata cache into the
stream until put_next_subbuf is issued. Add a check to ensure that it is
not populated until required.

Also, disallow get_subbuf() ioctl on metadata channel: its random-access
semantic does not play well with serialization of the metadata cache on
demand.

Reviewed-by: Julien Desfossez <jdesfossez@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add support for kvm x86 specific tracepoints

Two new probes for kvm-x86 and kvm-x86-mmu.

Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add mainline headers for kvm x86 tracepoints

Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Remove old 3.0.4 x86-64 extracted syscall info

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Point the x86-64 overrides to newly extracted 3.10-rc7 files

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add syscalls extracted files from a 3.10-rc7 kernel

This will add some previously unknown syscalls

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Improve documentation of the syscall extractor script

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: double length of __dynamic_len array

This is required by the newly introduced __dynamic_array_enc_ext_2() and
tp_memcpy_dyn_2().

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix printk instrumentation

- Don't require 2kB of stack anymore (requiring so much kernel stack
  space should be considered as a bug in itself),
- Add support for 3.10 kernel printk instrumentation.

This patch uses "Introduce __dynamic_array_enc_ext_2() and
tp_memcpy_dyn_2()".

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Introduce __dynamic_array_enc_ext_2() and tp_memcpy_dyn_2()

Allow copying into a single variable-length buffer from two sources.
Needed to fix printk support for Linux kernel < 3.5.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: ring buffer: get_subbuf() checks should be performed on "consumed" parameter

This triggers lots of false-positive -EAGAIN errors in flight recorder
snapshots.

Reported-by: Julien Desfossez <jdesfossez@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: SWITCH_FLUSH new sub-buffer checks

The SWITCH_FLUSH, when performed on a completely empty sub-buffer, was
missing some checks (imported from space reservation).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: ring buffer: handle concurrent update in nested buffer wrap around check

With stress-test loads that trigger sub-buffer switch very frequently
(small 4kB sub-buffers, frequent flush), we currently observe this kind
of warnings once every few minutes:

[65335.896208] ring buffer relay-overwrite-mmap, cpu 5: records were lost. Caused by:
[65335.896208]   [ 0 buffer full, 1 nest buffer wrap-around, 0 event too big ]

It appears that the check for nested buffer wrap-around does not take
into account that a concurrent execution contexts (either nested for
per-cpu buffers, or from another CPU or nested for global buffers) can
update the commit_count value concurrently.

What we really want to do with this check is to ensure that if we enter
a sub-buffer that had an unbalanced reserve/commit count, assuming there
is no hope that this gets rebalanced promptly, we detect this and drop
the current event. However, in the case where the commit counter has
been concurrently updated by another reserve or a switch, we want to
retry the entire reserve operation.

One way to detect this is to sample the reserve offset twice, around the
commit counter read, along with the appropriate memory barriers.
Therefore, we can detect if the mismatch between reserve and commit
counter is actually caused by a concurrent update, which necessarily has
updated the reserve counter.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Cleanup: lib_ring_buffer_switch_new_end() only calls subbuffer_set_data_size()

lib_ring_buffer_switch_new_end() is always called when an event exactly
fills a sub-buffer, which makes padding_size always 0. However, there is
one side-effect that lib_ring_buffer_switch_new_end() needs to have: it
calls subbuffer_set_data_size() to update the size of the data to be
read from the sub-buffer.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Revert "Cleanup: ring buffer: remove lib_ring_buffer_switch_new_end()"

This reverts commit 5fb66f07aae4884426f1706d0281bd242a38c2a7.

The equivalent UST commit of this change broke regression tests of
lttng-tools.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: handle writes of length 0

lib_ring_buffer_write(), lib_ring_buffer_memset() and
lib_ring_buffer_copy_from_user_inatomic() could be passed a length of 0.
This typically has no side-effect as far as writing into the buffers is
concerned, except for one detail: in overwrite mode, there is a check to
make sure the sub-buffer can be written into. This check is performed
even if length is 0. In the case where this would fall exactly at the
end of a sub-buffer, the check would fail, because the offset would fall
exactly at the beginning of the next sub-buffer.

It triggers this warning:

[65356.890016] ------------[ cut here ]------------
[65356.890016] WARNING: at /home/compudj/git/lttng-modules/wrapper/ringbuffer/../../lib/ringbuffer/../../wrapper/ringbuffer/../../lib/ringbuffer/backend.h:110 lttng_event_write+0x118/0x140 [lttng_ring_buffer_client_mmap_overwrite]()
[65356.890016] Hardware name: X7DAL
[65356.890016] Modules linked in: lttng_probe_writeback(O) lttng_probe_workqueue(O) lttng_probe_vmscan(O) lttng_probe_udp(O) lttng_probe_timer(O) lttng_probe_sunrpc(O) lttng_probe_statedump(O) lttng_probe_sock(O) lttng_probe_skb(O) lttng_probe_signal(O) lttng_probe_scsi(O) lttng_probe_sched(O) lttng_probe_rcu(O) lttng_probe_random(O) lttng_probe_printk(O) lttng_probe_power(O) lttng_probe_net(O) lttng_probe_napi(O) lttng_probe_module(O) lttng_probe_kvm(O) lttng_probe_kmem(O) lttng_probe_jbd2(O) lttng_probe_jbd(O) lttng_probe_irq(O) lttng_probe_ext4(O) lttng_probe_ext3(O) lttng_probe_compaction(O) lttng_probe_btrfs(O) lttng_probe_block(O) lttng_types(O) lttng_ring_buffer_metadata_mmap_client(O) lttng_ring_buffer_client_mmap_overwrite(O) lttng_ring_buffer_client_mmap_discard(O) lttng_ring_buffer_metadata_client(O) lttng_ring_buffer_client_overwrite(O) lttng_ring_buffer_client_discard(O) lttng_tracer(O) lttng_kretprobes(O) lttng_ftrace(O) lttng_kprobes(O) lttng_statedump(O) lttng_lib_ring_buffer(O) cpufreq_ondemand loop e1000e kvm_intel kvm ptp pps_core [last unloaded: lttng_lib_ring_buffer]
[65357.287529] Pid: 0, comm: swapper/7 Tainted: G           O 3.9.4-trace-test #143
[65357.309694] Call Trace:
[65357.317022]  <IRQ>  [<ffffffff8103a3ef>] warn_slowpath_common+0x7f/0xc0
[65357.336893]  [<ffffffff8103a44a>] warn_slowpath_null+0x1a/0x20
[65357.354368]  [<ffffffffa0ff17b8>] lttng_event_write+0x118/0x140 [lttng_ring_buffer_client_mmap_overwrite]
[65357.383025]  [<ffffffffa100134f>] __event_probe__block_rq_with_error+0x1bf/0x220 [lttng_probe_block]
[65357.410376]  [<ffffffff812ea134>] blk_update_request+0x324/0x720
[65357.428364]  [<ffffffff812ea561>] blk_update_bidi_request+0x31/0x90
[65357.447136]  [<ffffffff812eb68c>] blk_end_bidi_request+0x2c/0x80
[65357.465127]  [<ffffffff812eb6f0>] blk_end_request+0x10/0x20
[65357.481822]  [<ffffffff81406b7c>] scsi_io_completion+0x9c/0x670
[65357.499555]  [<ffffffff813fe320>] scsi_finish_command+0xb0/0xe0
[65357.517283]  [<ffffffff81406965>] scsi_softirq_done+0xa5/0x140
[65357.534758]  [<ffffffff812f1d30>] blk_done_softirq+0x80/0xa0
[65357.551710]  [<ffffffff81043b00>] __do_softirq+0xe0/0x440
[65357.567881]  [<ffffffff81043ffe>] irq_exit+0x9e/0xb0
[65357.582754]  [<ffffffff81026465>] smp_call_function_single_interrupt+0x35/0x40
[65357.604388]  [<ffffffff8167be2f>] call_function_single_interrupt+0x6f/0x80
[65357.624976]  <EOI>  [<ffffffff8100ac06>] ? default_idle+0x46/0x300
[65357.643541]  [<ffffffff8100ac04>] ? default_idle+0x44/0x300
[65357.660235]  [<ffffffff8100b899>] cpu_idle+0x89/0xe0
[65357.675109]  [<ffffffff81664911>] start_secondary+0x220/0x227

Always from an event that can write a 0-length field as last field of
its payload, and it always happen directly on a sub-buffer boundary.

While we are there, check for length 0 in lib_ring_buffer_read_cstr()
too.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: ring buffer: RING_BUFFER_FLUSH ioctl buffer corruption

lib_ring_buffer_switch_slow() clearly states:

 * Note, however, that as a v_cmpxchg is used for some atomic
 * operations, this function must be called from the CPU which owns the
 * buffer for a ACTIVE flush.

But unfortunately, the RING_BUFFER_FLUSH ioctl does not follow these
important directives. Therefore, whenever the consumer daemon or session
daemon explicitly triggers a "flush" on a buffer, it can race with data
being written to the buffer, leading to corruption of the reserve/commit
counters, and therefore corruption of data in the buffer. It triggers
these warnings for overwrite mode buffers:

[65356.890016] WARNING: at
/home/compudj/git/lttng-modules/wrapper/ringbuffer/../../lib/ringbuffer/../../wrapper/ringbuffer/../../lib/ringbuffer/backend.h:110 lttng_event_write+0x118/0x140 [lttng_ring_buffer_client_mmap_overwrite]()

Which indicates that we are trying to write into a sub-buffer for which
we don't have exclusive access. It also causes the following warnings to
show up:

[65335.896208] ring buffer relay-overwrite-mmap, cpu 5: records were lost. Caused by:
[65335.896208]   [ 0 buffer full, 80910 nest buffer wrap-around, 0 event too big ]

Which is caused by corrupted commit counter.

Fix this by sending an IPI to the CPU owning the flushed buffer for
per-cpu synchronization. For global synchronization, no IPI is needed,
since we allow writes from remote CPUs.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Cleanup: ring buffer: remove lib_ring_buffer_switch_new_end()

lib_ring_buffer_switch_new_end() is a leftover from the days where an
event that would exactly fill the current sub-buffer would automatically
trigger a sub-buffer switch into the next sub-buffer.

Even before the ring buffer code has been moved into lttng-modules, this
behavior had been changed: an event that exactly fills a sub-buffer only
fills this current sub-buffer, and does not need to switch into the
next one to populate the sub-buffer header. This change had been done so
periodical timer switch, which shares the same semantic as an event
exactly filling a sub-buffer, would not create tons of empty
sub-buffers.

However, when doing this change, lib_ring_buffer_switch_new_end() has
not been removed, but clearly should have been. Its job is now performed
by the event "commit".

lib_ring_buffer_switch_new_end() has no effect, since padding_size is
always 0.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

print warning and return -EBUSY on double get_subbuf()

Each get_subbuf() should be paired with a put_subbuf().

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add header to fix compilation of syscalls-extractor on 3.9 kernel

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: don't do 0 byte event reservation

Caused sequence of:

lttng create
lttng enable-event -k sched_switch
lttng start
lttng stop
lttng start
lttng stop

to hang on waiting for data......

Issue appeared in

commit d83004aa718065e5221d8ef4b99e4302b70b3df9
Author: Julien Desfossez <jdesfossez@efficios.com>
Date:   Thu Jun 6 16:38:48 2013 -0400

    Metadata cache and multiple metadata channels

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Document that payload size need to be greater than 0

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix build and load against linux-2.6.33.x

* lttng-event.h declared but did not implement
  lttng_add_perf_counter_to_ctx on kernel >=2.6.33, the implementation
  was in lttng-context-perf-counters.c, which was only included for
  kernel >=2.6.34.  This prevented the module from being loaded.

* on kernel 2.6.33.x, lttng-context-perf-counters.c complains about
  implicit declaration for {get,put}_online_cpus and
  {,un}register_cpu_notifier; so fix header inclusion.

Signed-off-by: Samuel Martin <smartin@aldebaran-robotics.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: add missing CONFIG_COMPAT around lib_ring_buffer_compat_ioctl

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Metadata cache and multiple metadata channels

Implement a cache for the kernel metadata and a list of metadata
channels.

When new metadata is appended, all metadata channels are awakened so
they can return from poll and get the newly added metadata
This allows to request the metadata multiple times by creating multiple
metadata channels (useful for snapshots).

With this new feature, the poll and get_subbuf ring buffer operations
are now overridden by lttng-abi for the metadata channels, to check the
cache before doing these operations.

Signed-off-by: Julien Desfossez <jdesfossez@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

fix block instrumentation probe signature mismatch for 3.9.x kernels

Was causing OOPS when tracing the block layer.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

fix: block instrumentation: NULL pointer dereference

This backtrace appears with kernel 3.9.4:

[19311.313455] BUG: unable to handle kernel NULL pointer dereference at           (null)
[19311.316589] IP: [<ffffffffa076392b>] __event_probe__block_bio+0x8b/0x1a0 [lttng_probe_block]
[19311.316589] PGD 41808a067 PUD 4190a3067 PMD 0
[19311.316589] Oops: 0000 [#1] PREEMPT SMP
[19311.316589] Modules linked in: lttng_probe_writeback(O) lttng_probe_workqueue(O) lttng_probe_vmscan(O) lttng_probe_udp(O) lm
[19311.316589] CPU 4
[19311.316589] Pid: 1423, comm: kjournald Tainted: G           O 3.9.4-trace-test #143 Supermicro X7DAL/X7DAL
[19311.316589] RIP: 0010:[<ffffffffa076392b>]  [<ffffffffa076392b>] __event_probe__block_bio+0x8b/0x1a0 [lttng_probe_block]
[19311.316589] RSP: 0018:ffff88041c0d5aa8  EFLAGS: 00010246
[19311.316589] RAX: 0000000000000000 RBX: ffff88041a994c00 RCX: ffff88041b610800
[19311.316589] RDX: 0000000000000004 RSI: ffff88041c0d5b00 RDI: ffff88041c0d5ab0
[19311.316589] RBP: ffff88041c0d5b18 R08: fffffffffffc0000 R09: 0000000000000000
[19311.316589] R10: ffff88041a9947e8 R11: 0000000000000001 R12: ffff880419252c18
[19311.316589] R13: ffff88041c9e0a48 R14: ffff88041749bd10 R15: ffff88041749bd20
[19311.316589] FS:  0000000000000000(0000) GS:ffff88042fd00000(0000) knlGS:0000000000000000
[19311.316589] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[19311.316589] CR2: 0000000000000000 CR3: 0000000417a0a000 CR4: 00000000000007e0
[19311.316589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[19311.316589] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[19311.316589] Process kjournald (pid: 1423, threadinfo ffff88041c0d4000, task ffff88041daa0000)
[19311.316589] Stack:
[19311.316589]  0000000000000000 ffff88041c3e4000 ffff880408987518 0000000000000024
[19311.316589]  0000000400000001 ffff88042fd19e30 000000000000002a 00000000000126c1
[19311.316589]  00000000000126bb 0000119043fa4efc ffff880400000000 0000000000000246
[19311.316589] Call Trace:
[19311.316589]  [<ffffffff812e79fb>] bio_attempt_back_merge+0xfb/0x1e0
[19311.316589]  [<ffffffff812ec96f>] blk_queue_bio+0x43f/0x570
[19311.316589]  [<ffffffff812ea68a>] generic_make_request+0xca/0x100
[19311.316589]  [<ffffffff81495bfe>] raid1_unplug+0x12e/0x170
[19311.316589]  [<ffffffff812ec36c>] blk_flush_plug_list+0x9c/0x210
[19311.316589]  [<ffffffff812ec4f8>] blk_finish_plug+0x18/0x50
[19311.316589]  [<ffffffff81243a48>] journal_commit_transaction+0x728/0x1f30
[19311.316589]  [<ffffffff8104e463>] ? try_to_del_timer_sync+0x53/0x70
[19311.316589]  [<ffffffff8104e485>] ? del_timer_sync+0x5/0xd0
[19311.316589]  [<ffffffff8124967d>] kjournald+0xed/0x290
[19311.316589]  [<ffffffff8106a270>] ? __init_waitqueue_head+0x60/0x60
[19311.316589]  [<ffffffff81249590>] ? commit_timeout+0x10/0x10
[19311.316589]  [<ffffffff810695fb>] kthread+0xdb/0xe0
[19311.316589]  [<ffffffff81672c60>] ? _raw_spin_unlock_irq+0x30/0x60
[19311.316589]  [<ffffffff81069520>] ? __init_kthread_worker+0x70/0x70
[19311.316589]  [<ffffffff8167af1c>] ret_from_fork+0x7c/0xb0
[19311.316589]  [<ffffffff81069520>] ? __init_kthread_worker+0x70/0x70

Fixes #559

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update rcu instrumentation to 3.9.[0-4]

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix CPU hotplug section mismatches

Get rid of the following section mismatches:

WARNING: /home/jang/temp/lttng-modules-2.2.0-r0/git/lttng-tracer.o(.text+0x19dc0): Section mismatch in reference from the function lttng_add_perf_counter_to_ctx() to the function .cpuinit.text:lttng_perf_counter_cpu_hp_callback()
The function lttng_add_perf_counter_to_ctx() references
the function __cpuinit lttng_perf_counter_cpu_hp_callback().
This is often because lttng_add_perf_counter_to_ctx lacks a __cpuinit
annotation or the annotation of lttng_perf_counter_cpu_hp_callback is wrong.

WARNING: /home/jang/temp/lttng-modules-2.2.0-r0/git/lib/lttng-lib-ring-buffer.o(.text+0x1204): Section mismatch in reference from the function channel_backend_init() to the function .cpuinit.text:lib_ring_buffer_cpu_hp_callback()
The function channel_backend_init() references
the function __cpuinit lib_ring_buffer_cpu_hp_callback().
This is often because channel_backend_init lacks a __cpuinit
annotation or the annotation of lib_ring_buffer_cpu_hp_callback is wrong.

WARNING: /home/jang/temp/lttng-modules-2.2.0-r0/git/lib/lttng-lib-ring-buffer.o(.text+0x269c): Section mismatch in reference from the function channel_create() to the function .cpuinit.text:lib_ring_buffer_cpu_hp_callback()
The function channel_create() references
the function __cpuinit lib_ring_buffer_cpu_hp_callback().
This is often because channel_create lacks a __cpuinit
annotation or the annotation of lib_ring_buffer_cpu_hp_callback is wrong.

WARNING: /home/jang/temp/lttng-modules-2.2.0-r0/git/lib/lttng-lib-ring-buffer.o(.text+0x4a1c): Section mismatch in reference from the function channel_iterator_init() to the function .cpuinit.text:channel_iterator_cpu_hotplug()
The function channel_iterator_init() references
the function __cpuinit channel_iterator_cpu_hotplug().
This is often because channel_iterator_init lacks a __cpuinit
annotation or the annotation of channel_iterator_cpu_hotplug is wrong.

Signed-off-by: Jan Glauber <jan.glauber@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add system calls definitions for powerpc-32

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Remove bashism in lttng-syscalls-generate-headers.sh

Options to echo are not portable. In particular, the 'echo -e' option is
implemented by some shells, including bash, to expand escape sequences.
However, dash is one of the other family of shells that instead expands
escape sequences by default.

The printf command is portable and much more reliable.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update ARM (32 bit) syscall tracepoints to 3.4

Update from 2.6.38 to 3.4. Added syscalls:
sys_acct
sys_swapon
sys_swapoff
sys_quotactl
sys_perf_event_open
sys_fanotify_init
sys_name_to_handle_at
sys_open_by_handle_at
sys_clock_adjtime
sys_syncfs
sys_sendmmsg
sys_setns
sys_process_vm_readv
sys_process_vm_writev

Signed-off-by: Jan Glauber <jan.glauber@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Version 2.2.0-rc2

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Remove useless lttng_metadata probe

We don't use this event anymore since we write the metadata directly
into the ring buffer, no need for an external event. This probe was
the only one in the lttng-probe-lttng module, so we can get rid of
this module as well.

Signed-off-by: Julien Desfossez <jdesfossez@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: warning kvm_trace_exit_reason redefined for 3.9 kernel

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: 3.9.0 block layer instrumentation build

Linux upstream commit:

commit 0a82a8d132b26d438eb90b3ab35a7016e7227a1d
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Thu Apr 18 09:00:26 2013 -0700

    Revert "block: add missing block_bio_complete() tracepoint"

Requires us to revert in lttng-modules too.

Fixes #512

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Revert "Stop build if CONFIG_TRACEPOINTS is not set"

This reverts commit 699f9673466e1a6537ad23cc697b79660639f260.

It breaks make clean.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Stop build if CONFIG_TRACEPOINTS is not set

Previously it just tries to compile with zero modules, which is
confusing if you thought you had configured everything correctly. Now it
throws an error which tells which went wrong.

Fixes #506

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add comments to endifs.

This should make it easier to read construction of the makefile.

Refs #506

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: remove ARM set_tls system call override

We'll need to find a better way to instrument ARM-specific system calls
located at a far offset from the standard systems calls. A 16MB
lttng-modules kernel module is really not acceptable.

Removing this instrumentation for now. sys_set_tls will appear as
sys_unknown.

Fixes #472

CC: Ryan Kyser <Ryan.Kyser@jci.com>
Ref: http://lists.lttng.org/pipermail/lttng-dev/2013-April/019990.html
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Cleanup: arm sys_mmap whitespace

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Clean up using global_dirty_limit wrapper for writeback probe

Move the wrapper around reading of global_dirty_limit to /wrapper/
directory.  Introduce a new kallsyms_lookup_dataptr function for
obtaining the address unchanged and use it in global_dirty_limit
wrapper.  Since the data address is available only if
CONFIG_KALLSYMS_ALL is set, omit the whole probe from building if this
config is missing.

[ Edit by Mathieu Desnoyers: small coding style fixes ]

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Version 2.2.0-rc1

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update README

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: vmscan instrumentation build

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

writeback instrumentation: remove duplicated structures

Don't replicate internal structures from the kernel: this is asking for
serious trouble, and could lead to breakage if building on newer kernels
that have modified structures.

The proper approach, if we really need to extract this information,
would be to add APIs to the Linux kernel workqueue that allow getting
this information.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

block: update instrumentation to 3.9 rc kernel

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

rcu: update to 3.9 rc kernel instrumentation

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

workqueue instrumentation: remove duplicated structures

Don't replicate internal structures from the kernel: this is asking for
serious trouble, and could lead to breakage if building on newer kernels
that have modified structures.

The proper approach, if we really need to extract this information,
would be to add APIs to the Linux kernel workqueue that allow getting
this information.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Rename odd event names

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Introduce API to remap event names exposed by LTTng

Some kernel event providers don't follow naming hierarchy. Rename them
internally within LTTng.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

lttng-module: sched.h: Fix compilation on 3.9 kernel

With commit 8bd75c77b7c6a3954140dd2e20346aef3efe4a35
included in 3.9-rc1 kernel, rt specific bits in "linux/sched.h"
were moved into new header file "linux/sched/rt.h".

Fixes this compilation error:
 CC [M]  /home/majo/lttng/lttng-modules/probes/lttng-probe-sched.o
...
/home/majo/lttng/lttng-modules/probes/../instrumentation/events/lttng-module
/../../../probes/../instrumentation/events/lttng-module/sched.h:
In function '__event_probe__sched_switch':
/home/majo/lttng/lttng-modules/probes/../instrumentation/events/lttng-module
/../../../probes/../instrumentation/events/lttng-module/sched.h:164:1:
error: 'MAX_RT_PRIO' undeclared (first use in this function)
...

Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix Linux 3.8 btrfs probe warning

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix Linux 3.8 ext4 probe support

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix 3.8 kernel support: namespace lttng_is_signed_type()

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: don't flush-final for offset 0 if reader is on sub-buffer

Triggers rare sub-buffer corruption when a buffer is completely full and
a final flush is then performed.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

instrumentation sched: add missing fork pid info

Fixes #434

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix check in lttng_strlen_user_inatomic

__copy_from_user_inatomic returns the number of bytes that could not be
copied, not an error code. This fixes the test accordingly.

[ Edit by Mathieu Desnoyers: change "ret" type to unsigned long too. ]

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

instrumentation: sync with Linux commit a1ce392

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix: statedump: missing locking, use lttng_iterate_fd

- Take a spinlock around use of dentry->d_name.name.
- Use lttng_iterate_fd wrapper (and thus iterate_fd() from Linux kernels
  from v3.7 and onward).

Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Implement lttng_iterate_fd wrapper

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Instrumentation cleanup: kmem events should print hex pointers

Fixes #422

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>