put thread offline while waiting for the init flag

Otherwise, the call_rcu thread might end up in a synchronize_rcu that
never ends.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu: move private definitions to .c file

The reader does not and should not know about RCU_QS_ACTIVE_ATTEMPTS
and KICK_READER_LOOPS.  Move the definition to urcu.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-bp: move private definitions to .c file

The reader does not and should not know about RCU_QS_ACTIVE_ATTEMPTS.
Move the definition to urcu-bp.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-qsbr: move private definitions to .c file

The reader does not and should not know about RCU_QS_ACTIVE_ATTEMPTS.
Move the definition to urcu-qsbr.c.  Also remove KICK_READER_LOOPS.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

rcutorture: fix rcutorture-qsbr

rcutorture-qsbr is not marking quiescent states, so it will always
have just one update in the whole test.  Fix it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

wfqueue: fix type-incorrect assignment

The "old_tail = q->tail, q->tail = node" assignment in wfqueue
is not type safe; q->tail is a pointer to pointer to node and the
correct value to assign is &node->next.  While the arithmetic is
the same, it is better to be tidy.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix tests Makefile EXTRA_DIST to use api.h

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix choice of default flavour in urcu/map/urcu.h

Hi, I noticed in the 0.64 release (and git too) that if a flavour is not
specified explicitly then RCU_MB is chosen in urcu/map/urcu.h, while the
docs say and the Makefile expects RCU_MEMBARRIER.  Note that the header
file urcu/static/urcu.h has similar logic but uses RCU_MEMBARRIER for
the default.

Before this patch:

$ nm *.a | grep rcu_init
00000000000003c0 T rcu_init_mb
00000000000003c0 T rcu_init_mb
0000000000000000 T rcu_init_sig

After this patch:

$ nm *.a | grep rcu_init
00000000000003c0 T rcu_init_memb
00000000000003c0 T rcu_init_mb
0000000000000000 T rcu_init_sig

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

api: remove list/hlist

Remove the parts that actually caused compilation to fail.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

api: remove arch-specific files

No change since they were a subset of api_gcc.h.  api_gcc.h is
renamed to api.h, and configure need not create a symlink anymore.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

api: make api_gcc.h a superset of the other headers

After this patch the only differences are:

- for_each_tid is now defined in api_x86.h

- HAVE_CPU_SET_T and HAVE_SCHED_SETAFFINITY are now defined in api_ppc.h

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

tests api: remove atomics

The code is #if 0'd already, remove it.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Use caa_ prefix for min() and max()

Defining min/max macros clashes with C++.

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Version 0.6.4, update changelog

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix ARM uatomic: missing return in uatomic and/or

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

rculfstack: header implementation should be defined as static inline

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

wfstack: header implementation should be defined as static inline

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu tests: hold mutex across use of custom allocator

A thread preempted for a long period of time could race, when scheduled
again, with another thread that would have been allocating/freeing
entries (thus wrapping-around the available buffer), which would trigger
this race only when overcommitting the number of threads compared to the
number of available CPUs.

Taking the mutex across alloc and free to fix this.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-bp: mremap wrapper fix

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-bp: add mremap wrapper for non-linux systems

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-bp: don't copy old region upon mremap

mremap keeps the same virtual pages for the old/new mappings. So
explicitly copying from the old mapping is not needed, and probably
buggy, since the old mapping might have been unmapped.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

api.h: fix type warning

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

non-linux system membarrier fallback update

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

pthread_self should be cast to unsigned long

Used as part of the random seed along with time().

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add MAP_ANONYMOUS mapping to MAP_ANON for BSD build

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

tests: only include syscall.h on linux systems

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-bp, urcu-qsbr: remove unneeded syscall.h include

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-defer: remove unneeded syscall.h include

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

call_rcu: per_cpu_call_rcu_data should be non-const

On FreeBSD:

In file included from urcu.c:438:
urcu-call-rcu-impl.h: In function 'get_cpu_call_rcu_data_mb':
urcu-call-rcu-impl.h:325: warning: return discards qualifiers from pointer target type

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update README info about gcc compability

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix urcu-call-rcu-impl.h missing call_rcu_wait for non-linux systems

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

compat_futex_async: fix missing return

compat_futex.c: In function `compat_futex_async':
compat_futex.c:114: warning: control reaches end of non-void function

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Check for __linux__ before including syscall.h

Reported-by: Jean-François Brousseau <jfb@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Remove unused local variables from compat_futex_async

Reported-by: Jean-François Brousseau <jfb@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Remove unneeded syscall.h include from urcu-call-rcu-impl.h

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add ChangeLog file to Makefile.am

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add changelog, update version to 0.6.3

uatomic: fix warning about unused variable

Fix:

compat_arch_x86.c: In function '_compat_uatomic_set':
compat_arch_x86.c:104:16: warning: variable 'result' set but not used [-Wunused-but-set-variable]

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

uatomic: fix i386 support

Fix:

* Incorrect prototype for uatomic_and and uatomic_or in i386
  compatibility code.
* Missing $(COMPAT) code inclusion in wfq/lfq tests.
* Silence gcc warnings about compat code (branch volountarily causing a
  linker error, which can never return).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update version to 0.6.2

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

uatomic generic: map uatomic_and/or to correct symbols

Leading underscore was missing.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix generic atomic ops and/or: add missing return

Fixes build on powerpc:

./urcu/uatomic/generic.h: In function '_uatomic_and':
./urcu/uatomic/generic.h:310:2: warning: 'return' with a value, in
function returning void
./urcu/uatomic/generic.h: In function '_uatomic_or':
./urcu/uatomic/generic.h:374:2: warning: 'return' with a value, in
function returning void

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix test warning

Patch from:
https://build.opensuse.org/package/view_file?file=liburcu0-cleanup.patch&package=liburcu0&project=devel%3Atools%3Alttng&srcmd5=fa3ab9fae0401b4c0f73a9cf474eea16

fixes a warning in the liburcu tests.

Reported-by: Yannick Brosseau <yannick.brosseau@polymtl.ca>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add missing headers into tarball, version 0.6.1

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Update version to 0.6.0

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Futex: turn "int" into "int32_t" for portability

Even though int is 32-bit on all architectures supported by liburcu so
far, make it future-proof by uint a int32_t, which enforces the same
type width used by the system call in the kernel.

Using int32_t and not uint32_t to make comparison with 0 more
straightforward.

Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add back uatomic_arch.h for slow deprecation process

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add back urcu-futex.h and urcu_ref.h for slow deprecation

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add ldconfig step to README

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add a pkg-config file for the new liburcu-cds

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Consolidate _LIBADD and _DEPENDENCIES in Makefile.am

Signed-off-by: Alexandre Montplaisir <alexandre.montplaisir@polymtl.ca>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add urcu/cds.h placeholder for all CDS headers

Using CDS headers becomes as simple as:

 #include <urcu/cds.h>

and link with

 -lurcu-cds

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Move the version-info to the AM_LDFLAGS variable

Since all the lib builded in this directory use the same version
we can put this command in the global variable

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Installed headers should only include other headers with < >

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Rename urcu/urcu-futex.h to urcu/futex.h

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Rename urcu/urcu_ref.h to urcu/ref.h

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Headers: move uatomic_*.h to urcu/uatomic/*.h, rename uatomic_arch.h to uatomic.h

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Headers: move arch_*.h to urcu/arch/*.h

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Headers: move *-static.h headers to urcu/static/

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Install urcu/map/*.h into system

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Headers: move *-map.h headers to urcu/map/

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add library version information

Following the guidelines from libtool
(http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.htm)
this patch add version information to the distributed libraries.
For the next release, the version will be 1:0:0.
It will need to be updated before each release.

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

lfqueue: update comments, cleanup

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

lfqueue: don't use defer_rcu anymore

lfqueue now uses call_rcu instead.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Combine stack and queues info liburcu-cds.so

Pretty much all libraries use a single .so for their data types. Do the
same here.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

cds containers: lfqueue and lfstack: don't depend on a particular rcu flavor

Remove rcu_read lock/unlock from the code, require the caller to ensure
protection. First move towards a single .so for all data containers.

This changes the lfqueue API, which is not very much used yet AFAIK.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add missing pkgconfig files to Makefile.am

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

arm: remove useless declarations

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

call_rcu: add back delay in list non-empty case

commit bc94ca9bada25f7403e3e859caa241146ae8e338 changed the !RT behavior
slightly: when the list is not empty, it does not wait for a delay
anymore. Add this delay back, to ensure we don't flood the system with
frequent synchronize_rcu() calls, which would slow down readers.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

call_rcu: handle retry without wait correctly

The wait scheme has an implementation problem: if the list is not empty
when the !RT scheme checks for it, it will restart the loop and
decrement the futex (again) without calling call_rcu_wait() (which would
wait until it is set back to 0). So in this case, we can end up
decrementing "futex" to values well below -1.

Fix this by moving the decrement before the loop, and duplicate it after
return from call_rcu_wait() + poll() delay. Also move the "set futex to
0 upon stopping" outside of the loop: this is the only way the loop can
be stopped anyway.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu: fix dependencies on libwfqueue.la

Without this patch, "make -jN" usually fails for N as low as 4.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu_ref: do error checking on urcu_ref_put

Underflow is what you really want to trap.  When you reach urcu_ref_get,
it is already too late.

[Edit: whitespaces -> tab cleanup]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

use generic-size macros for common implementation of atomic ops

The definition of _uatomic_cmpxchg is different in x86 and other
architectures.  For x86 it is a 4-argument macro, for other
architectures it is a 3-argument function.  This patch makes it easier
to implement atomic operations incrementally (first as a generic version
and then in machine-specific code), which aids testing and
bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

call_rcu: drop mutex

The mutex is being used only to protect OR accesses to the flags.
Just use atomic operations for that.

[ Edit: this also fixes busy-looping on flags that were previously read
without volatile access, which could lead to never-ending loop given the
appropriate set of compiler optimisations. ]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

uatomic: add uatomic_and

Only x86 support is arch-specific for now, the rest uses either cmpxchg
or gcc __sync_ builtins.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

uatomic: add uatomic_or

For now, only the version returning void is used.  Also, I am not
providing PPC versions because I would be unable to test it right
now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add missing -lwfqueue to add rcu flavors

Otherwise, linking with the flavor .so leads to:

/usr/local/lib/liburcu-bp.so: undefined reference to `cds_wfq_enqueue'
/usr/local/lib/liburcu-bp.so: undefined reference to `cds_wfq_init'
/usr/local/lib/liburcu-bp.so: undefined reference to `cds_wfq_node_init'

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add a cds_list_del_init()

Needed by some perfbook example code.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add comment to flag purpose of the ->qlen field

It is write-only, but is needed for debugging purposes.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

call_rcu: fix futex-based wakeup

The initial decrement was missing from the implementation. It now
behaves exactly like the urcu.c wait/wakeup code.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

atomic: fix typo in x86 compat implementation

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

rcutorture: make goflag volatile

Even cmm_barrier may not be enough as a compiler barrier in the presence
of static variables, and cmm_mb would not be either!  The compiler
assumes that calling a function does not clobber static variables if it
can prove that they do not escape (which also implies the correct phase
of the moon).

Rather than sprinkling the code with compiler barriers, I am taking the
easy way out and declaring the variable volatile.  Without this patch,
rcutorture_qsbr never finishes for me (GCC 4.5.0).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-qsbr: fix typo

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

call_rcu: use futex for wakeup scheme

If I remove the URCU_CALL_RCU_RT flag from the rbtree single writer
test, thus using the pthread_cond_signal mechanism, there is a huge
slowdown: without cpu affinity for the worker threads, it crawls to 129
updates/s (looks like mutex contention between the thread calling
call_rcu and the call_rcu thread). Adding CPU affinity to the per-cpu
call_rcu threads, I get 546 updates/s, which is slightly better (better
cache locality, and maybe the mutex contention is not as bad thanks to
the two threads sharing the same CPU).

So I decided to try replacing pthread_cond_wait/signal with my
futex-based implementation I use for the rest of the urcu lib: it has
the advantage of removing the mutex from the call_rcu() execution
entirely, sampling the "futex" variable without any mutex whatsoever for
the case where no wakeup is needed.

Disabling URCU_CALL_RCU_RT flag, with per-cpu affined call_rcu threads,
with my futex-based wakeup implementation, I get 55754 updates/s (even
better than with URCU_CALL_RCU_RT flag!).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

call_rcu: use cpu affinity for per-cpu call_rcu threads

I played a bit with the call_rcu() implementation alongside with my
rbtree tests, and noticed the following:

If I use per-cpu call_rcu threads with URCU_CALL_RCU_RT flag, with one
updater thread only for my rbtree (no reader), I get 38365 updates/s.
If I add cpu affinity to these per-cpu call_rcu threads (I have prepared
a patch that does this), it jumps to 54219 updates/s.  So it looks like
keeping per-cpu affinity for the call_rcu thread is a good thing.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Document the new call_rcu() primitives.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Make defer_rcu() usable from library using multiple URCU implementations

[ Edit: minor tab to whitespace cleanup ]

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Allow taking address of rcu_read_lock() and rcu_read_unlock()

Also incorporate README feedback from Mathieu and Josh.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Map symbols to allow multiple RCU flavors to be used in one binary

Probably need similar mapping for rcu_defer().  Definitely need
backwards-compatibility mapping for programs compiled against
old versions of the library.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Provide pthread_atfork-friendly interfaces

Provides call_rcu_before_fork() and call_rcu_after_fork_parent() to
go with the existing call_rcu_after_fork_child().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add pkg-config files for all urcu libs

Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

userspace-rcu tests: zero array before using

It seems like we need the test arrays to start out zeroed.

Without this patch, I get errors like this when running the tests:
test_urcu: test_urcu.c:201: test_array_alloc:
Assertion `test_array[index].a == 0xDEADBEEF || test_array[index].a ==
0' failed.

Signed-off-by: Colin McCabe <cmccabe@alumni.cmu.edu>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

arm: put CONFIG_RCU_ARM_HAVE_DMB in the global config.h

Change CONFIG_ARM_HAVE_DMB to CONFIG_RCU_ARM_HAVE_DMB while at the
same time making it seen as a global setting in urch/config.h.

The initial ARM < v7 work missed this setting, which allowed the URCU
to package to build correctly, but exposed the memorry barriers
defines incorrectly for other applications using the URCU headers.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Cleanup: remove unused value warning

return value of cmpxchg is purposefully unused in
_cds_lfq_enqueue_rcu(). Cast it to (void) to remove the compiler
warning.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Provide cleanup interfaces for per-CPU and per-thread call_rcu threads

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Maintain list of struct call_rcu_data to keep valgrind happy.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Add call_rcu() interface

Adds call_rcu(), with RCU threads to invoke the callbacks.  By default,
there will be one such RCU thread per process, created the first time
that call_rcu() is invoked.  On systems supporting sched_getcpu(), it
is possible to create one RCU thread per CPU by calling
create_all_cpu_call_rcu_data().

This version includes feedback from Mathieu Desnoyers.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

Fix ppc asm syntax error.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

update version to 0.5.4

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

urcu-bp: Update fork() handling

Introduce

extern void rcu_bp_before_fork(void);
extern void rcu_bp_after_fork_parent(void);
extern void rcu_bp_after_fork_child(void);

to handle fork gracefully. These disable signals and hold the registry mutex
across forks.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>