Fix a deadlock for auto-resize hash tables when cds_lfht_destroy
is called with RCU read-side lock held.
Example stack track of a hang:
Thread 2 (Thread 0x7f21ba876700 (LWP 26114)):
#0 syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
#1 0x00007f21beba7aa0 in futex (val3=0, uaddr2=0x0, timeout=0x0, val=-1, op=0, uaddr=0x7f21bedac308 <urcu_memb_gp+8>) at ../include/urcu/futex.h:81
#2 futex_noasync (timeout=0x0, uaddr2=0x0, val3=0, val=-1, op=0, uaddr=0x7f21bedac308 <urcu_memb_gp+8>) at ../include/urcu/futex.h:90
#3 wait_gp () at urcu.c:265
#4 wait_for_readers (input_readers=input_readers@entry=0x7f21ba8751b0, cur_snap_readers=cur_snap_readers@entry=0x0,
qsreaders=qsreaders@entry=0x7f21ba8751c0) at urcu.c:357
#5 0x00007f21beba8339 in urcu_memb_synchronize_rcu () at urcu.c:498
#6 0x00007f21be99f93f in fini_table (last_order=<optimized out>, first_order=13, ht=0x5651cec75400) at rculfhash.c:1489
#7 _do_cds_lfht_shrink (new_size=<optimized out>, old_size=<optimized out>, ht=0x5651cec75400) at rculfhash.c:2001
#8 _do_cds_lfht_resize (ht=ht@entry=0x5651cec75400) at rculfhash.c:2023
#9 0x00007f21be99fa26 in do_resize_cb (work=0x5651e20621a0) at rculfhash.c:2063
#10 0x00007f21be99dbfd in workqueue_thread (arg=0x5651cec74a00) at workqueue.c:234
#11 0x00007f21bd7c06db in start_thread (arg=0x7f21ba876700) at pthread_create.c:463
#12 0x00007f21bd4e961f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Thread 1 (Thread 0x7f21bf285300 (LWP 26098)):
#0 syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
#1 0x00007f21be99d8b7 in futex (val3=0, uaddr2=0x0, timeout=0x0, val=-1, op=0, uaddr=0x5651d8b38584) at ../include/urcu/futex.h:81
#2 futex_async (timeout=0x0, uaddr2=0x0, val3=0, val=-1, op=0, uaddr=0x5651d8b38584) at ../include/urcu/futex.h:113
#3 futex_wait (futex=futex@entry=0x5651d8b38584) at workqueue.c:135
#4 0x00007f21be99e2c8 in urcu_workqueue_wait_completion (completion=completion@entry=0x5651d8b38580) at workqueue.c:423
#5 0x00007f21be99e3f9 in urcu_workqueue_flush_queued_work (workqueue=0x5651cec74a00) at workqueue.c:452
#6 0x00007f21be9a0c83 in cds_lfht_destroy (ht=0x5651d8b2fcf0, attr=attr@entry=0x0) at rculfhash.c:1906
This deadlock is easy to reproduce when rapidly adding a large number of
entries in the cds_lfht, removing them, and calling cds_lfht_destroy().
The deadlock will occur if the call to cds_lfht_destroy() takes place
while a resize of the hash table is ongoing.
Fix this by moving the teardown of the lfht worker thread to libcds
library destructor, so it does not have to wait on synchronize_rcu from
a resize callback from within a read-side critical section. As a
consequence, the atfork callbacks are left registered within each urcu
flavor for which a resizeable hash table is created until the end of the
executable lifetime.
The other part of the fix is to move the hash table destruction to the
worker thread for auto-resize hash tables. This prevents having to wait
for resize callbacks from RCU read-side critical section. This is
guaranteed by the fact that the worker thread serializes previously
queued resize callbacks before the destroy callback.
Christopher Ng [Fri, 3 Feb 2023 12:16:06 +0000 (12:16 +0000)]
Fix building on MSYS2
Update cygwin libtool config in `configure.ac` to match MSYS2 build
environments as well. MSYS2 is also a Windows build environment that
produces DLLs.
Signed-off-by: Christopher Ng <facboy@gmail.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: I48ca648123fd40b8003c72c0447c70a8b4bde6d6
Wu Yongwei [Tue, 1 Nov 2022 13:48:24 +0000 (21:48 +0800)]
Fix Markdown issues
`_`, `<`, and `>` are special characters in Markdown, and need to be
escaped except in code blocks. So backticks or backslahes are used to
fix the apparent issues, which caused wrong rendering.
Eric Wong [Sun, 2 Oct 2022 16:13:43 +0000 (12:13 -0400)]
Fix: Always check pthread_create for failures
pthread_create may fail with EAGAIN (which is no fault of the
programmer), so don't allow the check to be compiled out.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: Ia2695ea6953b589ac8ab8b444fb668daee06a614
Applications using signalfd depend on signals being blocked in all
threads of the process, otherwise threads with unblocked signals
can receive them and starve the signalfd.
While some threads in URCU do block signals (e.g. workqueue
worker for rculfhash), the call_rcu, defer_rcu, and rculfhash
partition_resize_helper threads do not.
Always block all signals before creating threads, and only unblock
SIGRCU when registering a urcu-signal thread. Restore the SIGRCU
signal to its pre-registration blocked state on unregistration.
For rculfhash, cds_lfht_worker_init can be removed, because its only
effect is to block all signals except SIGRCU. Blocking all signals is
already done by the workqueue code, and unbloking SIGRCU is now done by
the urcu signal flavor thread regisration.
Co-developed-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: If78346b15bdc287417b992a8963098c6ea0dc7d2
Simon Marchi [Wed, 17 Aug 2022 15:24:25 +0000 (11:24 -0400)]
Fix: change method used by _rcu_dereference to strip type constness
Commit 1e41ec3b07e4 ("Make temporary variable in _rcu_dereference
non-const") used the trick to add 0 to the pointer passed as a parameter
to the macro to get rid of its constness, should it be const (with the
end goal of avoiding compiler warnings). This is problematic (as shown
in [1]) if it is a pointer to an opaque type though, as the compiler
cannot perform pointer arithmetic on such a pointer (even though it
wouldn't really need to here, as we add 0).
Change it to use another trick to strip away the constness, that
shouldn't hit this problem. It was found in the same stackoverflow post
as the original trick [2]. It consists of using a statement expression
like so:
__typeof__(({ const int foo; foo; }))
The statement expression yields a value of type `int`. Statement
expressions are extensions to the C language, but we already use them
here.
The test_build* binaries now need to be linked against the urcu library,
otherwise they would be missing the rcu_dereference_sym symbol.
Simon Marchi [Wed, 17 Aug 2022 17:11:21 +0000 (13:11 -0400)]
Fix: remove type constness in URCU_FORCE_CAST's C++ version
The test added by the following patch wouldn't compile, when built
without _LGPL_SOURCE:
CXX test_build_dynlink_cxx-test_build_cxx.o
In file included from ../../include/urcu/arch.h:25,
from /home/simark/src/urcu/tests/unit/test_build.c:28,
from /home/simark/src/urcu/tests/unit/test_build_cxx.cpp:3:
/home/simark/src/urcu/tests/unit/test_build.c: In function ‘void test_build_rcu_dereference()’:
/home/simark/src/urcu/include/urcu/compiler.h:85:42: error: type qualifiers ignored on cast result type [-Werror=ignored-qualifiers]
85 | #define URCU_FORCE_CAST(type, arg) (reinterpret_cast<type>(arg))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/simark/src/urcu/include/urcu/pointer.h:71:49: note: in expansion of macro ‘URCU_FORCE_CAST’
71 | __typeof__(p) _________p1 = URCU_FORCE_CAST(__typeof__(p), \
| ^~~~~~~~~~~~~~~
/home/simark/src/urcu/tests/unit/test_build.c:133:9: note: in expansion of macro ‘rcu_dereference’
133 | rcu_dereference(opaque_const);
| ^~~~~~~~~~~~~~~
The compiler complains that we do a cast to a const type, equivalent to:
reinterpret_cast<const int>(arg)
... and that the const is meaningless in this context.
Use std::remove_cv to strip away any const or volatile qualifiers from
the type (using a volatile type would result in the same warning).
Change-Id: I94e79fcccfc2108021752f65977e1548084c646a Signed-off-by: Simon Marchi <simon.marchi@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Simon Marchi [Wed, 17 Aug 2022 16:49:50 +0000 (12:49 -0400)]
Move extern "C" down in include/urcu/urcu-bp.h
A following patch adds a <type_traits> include in
urcu/compiler.h. However, compiler.h gets included by urcu/pointer.h,
which gets included by urcu/urcu-bp.h inside an extern "C" scope.
Including the C++ header file <type_traits> inside an extern "C" scope
doesn't work:
In file included from /home/simark/src/urcu/include/urcu/compiler.h:25,
from /home/simark/src/urcu/include/urcu/pointer.h:29,
from /home/simark/src/urcu/include/urcu/urcu-bp.h:58,
from /home/simark/src/urcu/include/urcu-bp.h:2,
from /home/simark/src/urcu/tests/unit/test_urcu_multiflavor-bp.c:28,
from /home/simark/src/urcu/tests/unit/test_urcu_multiflavor-bp_cxx.cpp:3:
/usr/include/c++/12.1.1/type_traits:44:3: error: template with C linkage
44 | template<typename _Tp>
| ^~~~~~~~
/home/simark/src/urcu/include/urcu/urcu-bp.h:41:1: note: ‘extern "C"’ linkage started here
41 | extern "C" {
| ^~~~~~~~~~
Move the extern "C" in urcu-bp.h down, so that the includes are not
inside it. Each header file is responsible to use extern "C" where
relevant, and we should avoid including files inside such a scope.
Change-Id: I42bdfa6ab445e8c40f5bcac1c1ae0786d443626c Signed-off-by: Simon Marchi <simon.marchi@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Michael Jeanson [Mon, 15 Aug 2022 15:11:54 +0000 (11:11 -0400)]
fix: ifdef linux specific cpu count compat
Expand the '#ifdef __linux__' block in src/compat-cpu.h to all static
inline functions related to sysfs since they are only useful on Linux
and fail to build on some non-Linux platforms. This issue was reported
on QNX.
The corresponding unit tests have to be skipped on non-Linux platforms.
Thanks to Elad Lahav <e2lahav@gmail.com> for reporting this issue.
Change-Id: I17c88a9a2fb5b9be6cf5325234a18ff40788cd09 Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Michael Jeanson [Wed, 27 Jul 2022 14:44:00 +0000 (10:44 -0400)]
fix: sysconf(_SC_NPROCESSORS_CONF) can be less than max cpu id
We rely on sysconf(_SC_NPROCESSORS_CONF) to get the maximum possible
number of CPUs that can be attached to the system for the lifetime of an
application.
As such we expect that the highest possible CPU id would be one less
than the number returned by sysconf(_SC_NPROCESSORS_CONF) which is
unfortunatly not always the case and can vary across libc
implementations and versions.
Glibc up to 2.35 will count the number of "cpuX" directories in
"/sys/devices/system/cpu" which doesn't include CPUS that were
hot-unplugged.
This information is however provided by the Linux kernel in
"/sys/devices/system/cpu/possible" in the form of a mask listing all the
CPUs that could possibly be hot-plugged in the system.
This patch replaces sysconf(_SC_NPROCESSORS_CONF) with an internal
function that first tries parsing the possible CPU mask to extract the
highest possible value and if this fails fallback to the previous
behavior.
Change-Id: I68dfed42ebbab02728a02eeefd4a395a22bb1bea Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Shao-Tse Hung [Tue, 2 Aug 2022 17:44:00 +0000 (01:44 +0800)]
Fix: revise obsolete command in README.md
The obsolete command `make bench` was replaced by `make short_bench` and
`make long_bench` in 2015. However, this command wasn't revised in
README, so I follow the previous commit and rewrite it.
The urcu-qsbr wait_gp() implements a futex wait/wakeup scheme identical to
the workqueue code, which has an issue with spurious wakeups.
A spurious wakeup on wait_gp can cause wait_gp to return with a
urcu_qsbr_gp.futex state of -1, which is unexpected. It would cause the
following loops in wait_for_readers() to decrement the
urcu_qsbr_gp.futex to values below -1, thus actively using CPU as values
will be decremented to very low negative values until it reaches 0
through underflow, or until the input_readers list is found to be empty.
The state is restored to 0 when the input_readers list is found to be
empty, which restores the futex state to a correct state for the
following calls to wait_for_readers().
This issue will cause spurious unexpected high CPU use, but will not
lead to data corruption.
Cause
=====
From futex(5):
FUTEX_WAIT
Returns 0 if the caller was woken up. Note that a wake-up can
also be caused by common futex usage patterns in unrelated code
that happened to have previously used the futex word's memory
location (e.g., typical futex-based implementations of Pthreads
mutexes can cause this under some conditions). Therefore, call‐
ers should always conservatively assume that a return value of 0
can mean a spurious wake-up, and use the futex word's value
(i.e., the user-space synchronization scheme) to decide whether
to continue to block or not.
Solution
========
We therefore need to validate whether the value differs from -1 in
user-space after the call to FUTEX_WAIT returns 0.
The urcu wait_gp() implements a futex wait/wakeup scheme identical to
the workqueue code, which has an issue with spurious wakeups.
A spurious wakeup on wait_gp can cause wait_gp to return with a
rcu_gp.futex state of -1, which is unexpected. It would cause the
following loops in wait_for_readers() to decrement the
rcu_gp.futex to values below -1, thus actively using CPU as values
will be decremented to very low negative values until it reaches 0
through underflow, or until the input_readers list is found to be empty.
The state is restored to 0 when the input_readers list is found to be
empty, which restores the futex state to a correct state for the
following calls to wait_for_readers().
This issue will cause spurious unexpected high CPU use, but will not
lead to data corruption.
Cause
=====
From futex(5):
FUTEX_WAIT
Returns 0 if the caller was woken up. Note that a wake-up can
also be caused by common futex usage patterns in unrelated code
that happened to have previously used the futex word's memory
location (e.g., typical futex-based implementations of Pthreads
mutexes can cause this under some conditions). Therefore, call‐
ers should always conservatively assume that a return value of 0
can mean a spurious wake-up, and use the futex word's value
(i.e., the user-space synchronization scheme) to decide whether
to continue to block or not.
Solution
========
We therefore need to validate whether the value differs from -1 in
user-space after the call to FUTEX_WAIT returns 0.
The urcu-wait urcu_adaptative_busy_wait() implements a futex wait/wakeup
scheme similar to the workqueue code, which has an issue with spurious
wakeups.
A spurious wakeup on urcu_adaptative_busy_wait can cause
urcu_adaptative_busy_wait to reach label skip_futex_wait with a
wait->state state of URCU_WAIT_WAITING, which is unexpected. It would
cause busy-waiting on URCU_WAIT_TEARDOWN state to start early. The
wait-teardown stage is done with URCU_WAIT_ATTEMPTS active attempts,
following by attempts spaced by 10ms sleeps. I do not expect that these
spurious wakeups will cause user-observable effects other than being
slightly less efficient that it should be.
urcu-wait is used by all urcu flavor's synchronize_rcu() to implement
the grace period batching scheme.
This issue will cause spurious unexpected high CPU use, but will not
lead to data corruption.
Cause
=====
From futex(5):
FUTEX_WAIT
Returns 0 if the caller was woken up. Note that a wake-up can
also be caused by common futex usage patterns in unrelated code
that happened to have previously used the futex word's memory
location (e.g., typical futex-based implementations of Pthreads
mutexes can cause this under some conditions). Therefore, call‐
ers should always conservatively assume that a return value of 0
can mean a spurious wake-up, and use the futex word's value
(i.e., the user-space synchronization scheme) to decide whether
to continue to block or not.
Solution
========
We therefore need to validate whether the value differs from
URCU_WAIT_WAITING in user-space after the call to FUTEX_WAIT returns 0.
The urcu-defer wait_defer() implements a futex wait/wakeup scheme identical to
the workqueue code, which has an issue with spurious wakeups.
A spurious wakeup on wait_defer can cause wait_defer to return with a
defer_thread_futex state of -1, which is unexpected. It would cause the
following loops in thr_defer() to decrement the defer_thread_futex to
values below -1, thus actively using CPU as values will be decremented
to very low negative values until it reaches 0 through underflow, or
until callbacks are eventually queued. The state is restored to 0 when
callbacks are found, which restores the futex state to a correct state
for the following calls to wait_defer().
This issue will cause spurious unexpected high CPU use, but will not
lead to data corruption.
Cause
=====
From futex(5):
FUTEX_WAIT
Returns 0 if the caller was woken up. Note that a wake-up can
also be caused by common futex usage patterns in unrelated code
that happened to have previously used the futex word's memory
location (e.g., typical futex-based implementations of Pthreads
mutexes can cause this under some conditions). Therefore, call‐
ers should always conservatively assume that a return value of 0
can mean a spurious wake-up, and use the futex word's value
(i.e., the user-space synchronization scheme) to decide whether
to continue to block or not.
Solution
========
We therefore need to validate whether the value differs from -1 in
user-space after the call to FUTEX_WAIT returns 0.
The urcu call_rcu() and rcu_barrier() each implement a futex wait/wakeup
scheme identical to the workqueue code, which has an issue with spurious
wakeups.
* call_rcu
A spurious wakeup on call_rcu_wait can cause call_rcu_wait to return
with a crdp->futex state of -1, which is unexpected. It would cause the
following loops in call_rcu_thread() to decrement the crdp->futex to
values below -1, thus actively using CPU time as values will be
decremented to very low negative values until the futex value underflows
back to 0. The state is *not* restored to 0 when the callback list is
found to be non-empty, so this unexpected state will persist until the
crdp->futex state underflows back to 0, or until the call_rcu_thread is
stopped. What prevents this from having too much user-observable effects
is that the call rcu thread has a 10ms sleep between loops, to favor
batching of callbacks. Therefore, rather than being a purely 100% active
busy-wait, this scenario leads to a busy-wait which is paced by 10ms
sleeps.
Therefore the observed issue will be that the call_rcu_thread will
unexpectedly wake up the CPU each 10ms after this spurious wakeup
happens.
* rcu_barrier
A spurious wakeup on call_rcu_completion_wait can cause
call_rcu_completion_wait to return with a completion->futex state of -1,
which is unexpected. It would cause the following loops in rcu_barrier()
to decrement the completion->futex to values below -1, thus actively
using CPU time as values will be decremented to very low negative values
until either the barrier count reaches 0 or until the futex value
underflows to 0.
Therefore the observed issue will be that rcu_barrier() will
unexpectedly use a lot of CPU time when this spurious wakeup happens.
These issues will cause spurious unexpected high CPU use, but will not
lead to data corruption.
Cause
=====
From futex(5):
FUTEX_WAIT
Returns 0 if the caller was woken up. Note that a wake-up can
also be caused by common futex usage patterns in unrelated code
that happened to have previously used the futex word's memory
location (e.g., typical futex-based implementations of Pthreads
mutexes can cause this under some conditions). Therefore, call‐
ers should always conservatively assume that a return value of 0
can mean a spurious wake-up, and use the futex word's value
(i.e., the user-space synchronization scheme) to decide whether
to continue to block or not.
Solution
========
We therefore need to validate whether the value differs from -1 in
user-space after the call to FUTEX_WAIT returns 0.
The workqueue thread futex_wait() returns with a workqueue->futex state
of -1, which is unexpected. In this situation, the workqueue thread is
observed to use 99% of CPU as workqueue->futex values are decremented to
very low negative values while the workqueue is empty.
This issue will cause spurious unexpected high CPU use, but will not
lead to data corruption.
Cause
=====
From futex(5):
FUTEX_WAIT
Returns 0 if the caller was woken up. Note that a wake-up can
also be caused by common futex usage patterns in unrelated code
that happened to have previously used the futex word's memory
location (e.g., typical futex-based implementations of Pthreads
mutexes can cause this under some conditions). Therefore, call‐
ers should always conservatively assume that a return value of 0
can mean a spurious wake-up, and use the futex word's value
(i.e., the user-space synchronization scheme) to decide whether
to continue to block or not.
Solution
========
We therefore need to validate whether the value differs from -1 in
user-space after the call to FUTEX_WAIT returns 0.
Michael Jeanson [Mon, 13 Sep 2021 20:13:44 +0000 (16:13 -0400)]
Improved test framework
This is based on the babeltrace / librseq test framework with the
objective of standardising across projects.
Regroup all the configure detected values relevant to the test suite in
a single generated file. This file will be automatically sourced by the
test suite in most scenarios but can also be sourced in the shell of a
user.
* All user overridable variables start with 'URCU_TESTS_'.
* The priority for variables is :
Environment -> env.sh -> utils.sh (defaults).
* A user can source 'env.sh', override some of the values and manually
run test scripts.
* The test suite can run without an 'env.sh' file present.
Change-Id: Id94f7085ed1ea0e30207856cf1594ca30585536c Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Allow initializing lfht node to "removed" state to allow querying
whether the node is published in a hash table before it is added to the
hash table and after it has been removed from the hash table.
Michael Jeanson [Tue, 7 Dec 2021 19:42:26 +0000 (14:42 -0500)]
fix: properly detect 'cmpxchg' on x86-32
We wrongly assumed that on x86-32 when '__i386__' is defined but none of
'__i486__', '__i586__' or '__i686__' that the target arch is a literal
i386 cpu without the cmpxchg instructions. However, when building with
'-march=core2' we get '__i386__' but none of the others even if the arch
is newer than an i686.
Change the compat code to use the '__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4'
builtin define to detect an x86-32 system without the cmpxchg
instructions.
Since this builtin define was introduced in GCC 4.3 and Clang 3.3,
building with older compilers on any x86-32 system will enable the
compat layer regardless of the availability of the instructions.
Change-Id: I8329431e55d778405b2ca7007d90c2c6e5cdd426 Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Michael Jeanson [Tue, 14 Sep 2021 14:41:08 +0000 (10:41 -0400)]
Always use '__thread' for Thread local storage except on MSVC
Use the GCC extension '__thread' [1] for Thread local storage on all C
and C++ compilers except MSVC.
While C11 and C++11 respectively offer '_Thread_local' and
'thread_local' as potentialy faster implementations, they offer no
guarantees of compatibility when used in a library interface which might
be used by both C and C++ client code.
Fix: powerpc32: transparent unions alter calling convention
On powerpc32, transparent unions have an impact on the calling
convention used for the argument, as they use the calling convention of
the first field of the union rather than the union itself. On powerpc32,
the calling convention for a union is that the register has a pointer to
the union, which differs from the calling convention of its first field
(which is a pointer in this case).
"[...] the argument is passed to the function using the calling
conventions of the first member of the transparent union, not the
calling conventions of the union itself. All members of the union must
have the same machine representation; this is necessary for this
argument passing to work properly." [1]
Therefore, use a transparent union for c++ so c++ compilers can emit
caller code with a compatible stack layout. The "ignored attribute"
warning emitted by clang appears to be only for architectures where the
calling convention is not affected by the presence of transparent union
attribute. Therefore, simply silence this warning.
Michael Jeanson [Thu, 9 Sep 2021 16:11:16 +0000 (12:11 -0400)]
fix: don't use C++ thread_local on MacOs
Recent versions of Apple's clang++ do support 'thread_local' but the
implementation generates additional helper symbols. This is a problem
when accessing an extern TLS variable in a C++ compile unit that is
provided by a C library that doesn't have those extra symbols.
Fallback to using '__thread' on MacOs.
Change-Id: I87cb5b3c9293f7bf66f7115f453b546dd793a449 Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
wfcqueue: combine C++ API cds_wfcq_head_cast with overloading
For the sake of wrapper API, implement a cds_wfcq_head_cast_cpp with
overloading, thus leaving in place the cds_wfcq_head_cast and
__cds_wfcq_head_cast C identifiers already exposed by the C++ API.
When using CDS_LIST_HEAD_INIT in a C++ program, we get (with clang
rather than gcc, because the error message is clearer):
/home/simark/src/urcu/tests/unit/test_build_cxx.cpp:73:13: error: ISO C++ requires field designators to be specified in declaration order; field 'prev' will be initialized after field 'next' [-Werror,-Wreorder-init-list]
.head = CDS_LIST_HEAD_INIT(list.head),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/simark/src/urcu/include/urcu/list.h:49:53: note: expanded from macro 'CDS_LIST_HEAD_INIT'
#define CDS_LIST_HEAD_INIT(name) { .prev = &(name), .next = &(name) }
^~~~~~~~~~~~~~~
/home/simark/src/urcu/tests/unit/test_build_cxx.cpp:73:13: note: previous initialization for field 'prev' is here
.head = CDS_LIST_HEAD_INIT(list.head),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/simark/src/urcu/include/urcu/list.h:49:44: note: expanded from macro 'CDS_LIST_HEAD_INIT'
#define CDS_LIST_HEAD_INIT(name) { .prev = &(name), .next = &(name) }
^~~~~~~
Fix that by swapping the initializers in CDS_LIST_HEAD_INIT.
Change-Id: Ib127b9cc128fd64f5b2ae028e093be42ca10f437 Signed-off-by: Simon Marchi <simon.marchi@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Simon Marchi [Thu, 29 Jul 2021 02:48:21 +0000 (22:48 -0400)]
Add C++ build tests
Some urcu header files cause build failures when included in C++
programs. Add a test file that includes all exported headers (except
those that are marked as deprecated) and build that test file as a C and
C++ program, with and without _LGPL_SOURCE defined (to test both the
static and non-static implementations). This helps ensure that the code
in these headers works as both languages. This alone does not ensure
full coverage, there may be code in unused macros that would need
fixing. But by including the "static" headers, this already finds a few
issues.
The test doesn't run anything, its purpose is only to verify that things
build.
This catches the following build failures:
- clang++ doesn't know the __transparent_union__ attribute, place some
pragmas to ignore this warning around where __transparent_union__ is
used.
- CDS_WFS_WOULDBLOCK and CDS_WFS_END are cast to a void*. This doesn't
work in C++ when assigning to a field them to typed pointer. Fix
them by casting to the appropriate type.
- The transparent union trick doesn't work in C++:
CXX test_build_cxx.o
In file included from /home/simark/src/urcu/include/urcu/wfstack.h:116,
from /home/simark/src/urcu/include/urcu/cds.h:35,
from /home/simark/src/urcu/tests/unit/test_build_cxx.cpp:34:
/home/simark/src/urcu/include/urcu/static/wfstack.h: In function ‘cds_wfs_node* _cds_wfs_pop_with_state_blocking(cds_wfs_stack*, int*)’:
/home/simark/src/urcu/include/urcu/static/wfstack.h:350:54: error: could not convert ‘s’ from ‘cds_wfs_stack*’ to ‘cds_wfs_stack_ptr_t’
350 | retnode = ___cds_wfs_pop_with_state_blocking(s, state);
| ^
| |
| cds_wfs_stack*
A C++ user can fall back to instantiating a cds_wfs_stack_ptr_t
explicitly, assigning the right field, and passing the
cds_wfs_stack_ptr_t to the function. Fix a few instances in the
static headers.
A follow up commit will introduce C++ API wrappers based on
function overloading to provide a C++ API similar to the C API.
Signed-off-by: Simon Marchi <simon.marchi@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: I30adc8df69414a0a019c5ec081f64cfac64843f5
Simon Marchi [Tue, 31 Aug 2021 22:12:44 +0000 (18:12 -0400)]
Build and run regression and unit tests as C++ programs
Build and run all tests under tests/regression and tests/unit as C++
programs in addition to C. This helps get confidence that urcu, when
used from a C++ program, behaves well.
Change-Id: Iacaa42dddbcbf59eff8e327edfd0352cce0b74b7 Signed-off-by: Simon Marchi <simon.marchi@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Add `urcu_posix_assert()` as `assert()` replacement
This macro acts like the regular `assert()` macro unless NDEBUG is
defined in which case it consumes the expression and becomes a no-op.
This consumption trick (see `_urcu_use_expression()` macro) prevents the
compiler from warning about unused variables even when assert() are
removed by the NDEBUG define.
This macro is also used for the existing `urcu_assert_debug()` macro.
The implementation of `_urcu_use_expression()` is inspired by the
Babeltrace 2 approach.
See `BT_USE_EXPR()` macro and documentation in Babeltrace commit [1]:
commit 1778c2a4134647150b199b2b57130817144446b0
Author: Philippe Proulx <eeppeliteloop@gmail.com>
Date: Tue Apr 21 11:15:42 2020 -0400
lib: assign a unique ID to each pre/postcond. and report it on failure
All assertion macros are moved to the new urcu/assert.h file.
Simon Marchi [Fri, 30 Jul 2021 03:06:11 +0000 (23:06 -0400)]
Make temporary variable in _rcu_dereference non-const
When building the lttng-tools project with Ubuntu's gcc 11, I get the
following error:
CC agent.lo
In file included from /tmp/lttng/include/urcu/arch.h:25,
from /tmp/lttng/include/urcu/uatomic.h:23,
from /home/simark/src/lttng-tools/src/bin/lttng-sessiond/agent.c:11:
/home/simark/src/lttng-tools/src/bin/lttng-sessiond/agent.c: In function ‘agent_update’:
/tmp/lttng/include/urcu/static/pointer.h:96:33: error: argument 2 of ‘__atomic_load’ discards ‘const’ qualifier [-Werror=incompatible-pointer-types]
96 | __atomic_load(&(p), &_________p1, __ATOMIC_CONSUME); \
| ^~~~~~~~~~~~~
/tmp/lttng/include/urcu/compiler.h:69:70: note: in definition of macro ‘caa_container_of’
69 | const __typeof__(((type *) NULL)->member) * __ptr = (ptr); \
| ^~~
/tmp/lttng/include/urcu/rculist.h:87:20: note: in expansion of macro ‘cds_list_entry’
87 | for (pos = cds_list_entry(rcu_dereference((head)->next), __typeof__(*(pos)), member); \
| ^~~~~~~~~~~~~~
/tmp/lttng/include/urcu/pointer.h:47:33: note: in expansion of macro ‘_rcu_dereference’
47 | #define rcu_dereference _rcu_dereference
| ^~~~~~~~~~~~~~~~
/tmp/lttng/include/urcu/rculist.h:87:35: note: in expansion of macro ‘rcu_dereference’
87 | for (pos = cds_list_entry(rcu_dereference((head)->next), __typeof__(*(pos)), member); \
| ^~~~~~~~~~~~~~~
/home/simark/src/lttng-tools/src/bin/lttng-sessiond/agent.c:1551:9: note: in expansion of macro ‘cds_list_for_each_entry_rcu’
1551 | cds_list_for_each_entry_rcu(ctx, &agt->app_ctx_list, list_node) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
This is because the pointer passed to _rcu_dereference is const (the
pointer itself is const, IIUC, not necessarily the data it points to),
so the temporary _________p1 is also declared as const. We therefore
can't pass a non-const pointer to it to a function that modifies it.
I applied the trick found here [1] with success to get rid of the
constness of the variable. With this change, lttng-tools compiles
successfully with gcc 11.
There may be other spots in the headers where this would be needed, but
it is hard to spot them. I think we would need to write some test file
that pass const pointers to all macros of the API and see if they
compile.
Fix: x86 and s390 uatomic: __hp() macro warning with gcc 11
The __hp() macro used in the x86 and s390 uatomic code generates the
following warning with gcc-11:
In file included from ../include/urcu/uatomic.h:27,
from ../include/urcu/static/wfcqueue.h:35,
from ../include/urcu/wfcqueue.h:133,
from workqueue.c:39:
workqueue.c: In function ‘workqueue_thread’:
../include/urcu/uatomic/x86.h:155:17: warning: array subscript ‘struct __uatomic_dummy[0]’ is partly outside array bounds of ‘struct cds_wfcq_tail[1]’ [-Warray-bounds]
155 | __asm__ __volatile__(
| ^~~~~~~
workqueue.c:184:38: note: while referencing ‘cbs_tmp_tail’
184 | struct cds_wfcq_tail cbs_tmp_tail;
| ^~~~~~~~~~~~
The (previously undocumented) reason for this macro is to allow passing the
"void *" parameter as "m" or "+m" operand to the inline assembly. That
motivation was explained in commit 53b8ed6836363 ("s390 uatomic arch fix").
The out of bound access is detected by gcc because struct
__uatomic_dummy's length is quite large: an array of 10 unsigned long,
which is larger than the size pointed to by the void pointer.
So rather than using a fixed-size type, cast to a structure containing
an array of characters of a size matching the @addr input argument.
While we are at it and digging out git archeology, properly document the
__hp() macro for posterity.
Michael Jeanson [Wed, 2 Jun 2021 14:55:22 +0000 (10:55 -0400)]
Add serialized ABI definition files
This commit contains the serialized ABI definitions for a typical build
of the liburcu librairies. This information is extracted using
libabigail (https://sourceware.org/libabigail/).
The artefacts used to generate these were built with CFLAGS="-O0 -ggdb".
You can compare the serialized ABI with a shared object to check for
breaking changes. For example, here we compare an in-tree built version
of liburcu-memb.so with the serialized ABI of stable-0.13 :
Michael Jeanson [Tue, 1 Jun 2021 21:01:49 +0000 (17:01 -0400)]
bump SONAME major to 8
In URCU 0.11, we introduced new symbols to clean up the library symbol
namespacing, using the "alias" attribute to keep emitting the old
symbols, expecting to preserve ABI backward compatibility.
Unfortunately, it turns out that even though it works well for function
symbols, it is broken for public global variables due to the way ELF
copy relocation works.
When building a non-PIC executable that uses an extern variable, a .bss
symbol is emitted in the executable. This will take precedence over the
symbol implemented within the library in the Global Symbol Table.
Unfortunately, the alias within the library will not be aware that the
actual GST symbol differs from its alias within the library, and the
addresses for the symbol and its alias will differ at runtime.
Considering that this compatibility issue affects official library
releases, there is little we can do beyond documenting this issue, and
bumping the Userspace RCU major soname for the next (0.13) release.
Change-Id: I0ca8407dcffd871f025814923c6e329ec260133a Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Michael Jeanson [Fri, 7 May 2021 15:34:33 +0000 (11:34 -0400)]
fix: clock_gettime on macOs
Newer version of macOs have an implementation of clock_gettime() that
requires additionnal setup, move the platform specific code first so it
is always used.
Change-Id: I12fcdeff6c0ae59bc1a13f4e2cd7f4ebcedfc253 Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fix: rculist header: use parenthesis around macro parameters
The coding style followed across liburcu is to use parenthesis around
macro parameters when it would otherwise lead to unexpected results due
to priority of operators. Fix rculist.h to follow this coding style.
Fix: rcuhlist header: use parenthesis around macro parameters
The coding style followed across liburcu is to use parenthesis around
macro parameters when it would otherwise lead to unexpected results due
to priority of operators. Fix rcuhlist.h to follow this coding style.
Fix: hlist header: use parenthesis around macro parameters
The coding style followed across liburcu is to use parenthesis around
macro parameters when it would otherwise lead to unexpected results due
to priority of operators. Fix hlist.h to follow this coding style.
Fix: list.h: use parenthesis around macro parameters, caa_container_of()
The coding style followed across liburcu is to use parenthesis around
macro parameters when it would otherwise lead to unexpected results due
to priority of operators. Fix list.h to follow this coding style.
Use caa_container_of() for cds_list_entry rather than open-code the
pointer arithmetic.
Comparing an offset from an object with NULL is undefined behavior
and the compiler may assume that this is never true.
This is indeed what is observed with gcc-10 miscompiling
cds_hlist_for_each_entry_rcu_2().
Fix this by introducing cds_hlist_entry_safe() rather than open-coding
the NULL check comparisons, and move cds_hlist_for_each_entry_2()
and cds_hlist_for_each_entry_safe_2() to this scheme as well.
Fix: use __atomic_load() rather than atomic load explicit
Use __atomic_load (gcc extension) rather than atomic load explict
(C11/C++11) for rcu_dereference because it does not require the input
type to be _Atomic. This fixes a regression with clang introduced by
commit 380f4b19052 ("Fix: use atomic load memory_order_consume for
rcu_dereference on C11/C++11").
Note that the cmm_smp_read_barrier_depends is removed when using
__ATOMIC_CONSUME because their memory ordering effect is redundant.
Michael Jeanson [Tue, 13 Apr 2021 20:19:06 +0000 (16:19 -0400)]
fix: HAVE_SCHED_SETAFFINITY is not defined
Use '#ifdef' instead of '#if' to test if HAVE_SCHED_SETAFFINITY is
defined. Both work but using '#if' on an undefined macro will generate a
warning with '-Wundef'.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: Ieb46ddab9ba033a5c552dbe78ac398cea0a641e8
Michael Jeanson [Thu, 1 Apr 2021 18:39:01 +0000 (14:39 -0400)]
cleanup: explicitly mark unused parameters (-Wunused-parameter)
Add the 'unused' attribute to function parameters that are unused to
allow turning on -Wunused-parameter and distinguish unused parameters
that are actual errors.
Change-Id: Ie585e37f9d38718543a31aee2e7ab3428cdfd0a5 Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
projects / userspace-rcu.git / log
