AC_SUBST([URCU_LIBRARY_VERSION], [1:0:0])
AC_CONFIG_AUX_DIR([config])
+AC_CONFIG_MACRO_DIR([config])
AC_CANONICAL_TARGET
AC_CANONICAL_HOST
AM_INIT_AUTOMAKE([foreign dist-bzip2 no-dist-gzip])
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
AC_CONFIG_SRCDIR([urcu.h])
-AM_PROG_MKDIR_P
AC_CONFIG_HEADERS([config.h urcu/config.h])
-# Keep at the end to do not pollute installed header.
AH_TEMPLATE([CONFIG_RCU_SMP], [Enable SMP support. With SMP support enabled, uniprocessors are also supported. With SMP support disabled, UP systems work fine, but the behavior of SMP systems is undefined.])
AH_TEMPLATE([CONFIG_RCU_HAVE_FENCE], [Defined when on a system that has memory fence instructions.])
AH_TEMPLATE([CONFIG_RCU_HAVE_FUTEX], [Defined when on a system with futex support.])
-AH_TEMPLATE([CONFIG_RCU_COMPAT_ARCH], [Compatibility mode for i386 which lacks
-cmpxchg instruction.])
-AH_TEMPLATE([CONFIG_RCU_ARM_HAVE_DMB], [Use the dmb instruction is available for use on ARM.])
+AH_TEMPLATE([CONFIG_RCU_COMPAT_ARCH], [Compatibility mode for i386 which lacks cmpxchg instruction.])
+AH_TEMPLATE([CONFIG_RCU_ARM_HAVE_DMB], [Use the dmb instruction if available for use on ARM.])
# Checks for programs.
AC_PROG_CC
AC_CHECK_FUNCS([bzero gettimeofday munmap sched_getcpu strtoul sysconf])
# Find arch type
-case $host_cpu in
- i386) ARCHTYPE="x86"; SUBARCHTYPE="x86compat" ;;
- i486) ARCHTYPE="x86";;
- i586) ARCHTYPE="x86";;
- i686) ARCHTYPE="x86";;
- amd64) ARCHTYPE="x86";;
- x86_64) ARCHTYPE="x86";;
- powerpc) ARCHTYPE="ppc" ;;
- ppc64) ARCHTYPE="ppc" ;;
- powerpc64) ARCHTYPE="ppc" ;;
- ppc) ARCHTYPE="ppc" ;;
- s390) ARCHTYPE="s390" ;;
- s390x) ARCHTYPE="s390" ;;
- sparc64) ARCHTYPE="sparc64" ;;
- alpha*) ARCHTYPE="alpha" ;;
- ia64) ARCHTYPE="gcc" ;;
- arm*) ARCHTYPE="arm" ;;
- *) ARCHTYPE="unknown";;
-esac
-
-if test "x$ARCHTYPE" = "xarm" ; then
-AC_MSG_CHECKING([checking for dmb instruction])
-AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-]], [[
-asm volatile("dmb":::"memory");
-]])],[
- AC_MSG_RESULT([yes])
- AC_DEFINE([CONFIG_RCU_ARM_HAVE_DMB], [1])
-
-],[
- AC_MSG_RESULT([no])
+AS_CASE([$host_cpu],
+ [i386], [ARCHTYPE="x86" && SUBARCHTYPE="x86compat"],
+ [i486], [ARCHTYPE="x86"],
+ [i586], [ARCHTYPE="x86"],
+ [i686], [ARCHTYPE="x86"],
+ [amd64], [ARCHTYPE="x86"],
+ [x86_64], [ARCHTYPE="x86"],
+ [powerpc], [ARCHTYPE="ppc"],
+ [ppc64], [ARCHTYPE="ppc"],
+ [powerpc64], [ARCHTYPE="ppc"],
+ [ppc], [ARCHTYPE="ppc"],
+ [s390], [ARCHTYPE="s390"],
+ [s390x], [ARCHTYPE="s390"],
+ [sparc64], [ARCHTYPE="sparc64"],
+ [alpha*], [ARCHTYPE="alpha"],
+ [ia64], [ARCHTYPE="gcc"],
+ [arm*], [ARCHTYPE="arm"],
+ [ARCHTYPE="unknown"]
+)
-])
-fi
+AC_SUBST(ARCHTYPE)
+AC_SUBST(SUBARCHTYPE)
UATOMICSRC=urcu/uatomic/$ARCHTYPE.h
ARCHSRC=urcu/arch/$ARCHTYPE.h
-if test "$ARCHTYPE" == "armv7l"; then
- CFLAGS="-mcpu=cortex-a9 -mtune=cortex-a9 -O"
-fi
-AC_SUBST(ARCHTYPE)
-AC_SUBST(SUBARCHTYPE)
+AS_IF([test "x$SUBARCHTYPE" = xx86compat],[
+ AC_DEFINE([CONFIG_RCU_COMPAT_ARCH], [1])
+])
+
+AS_IF([test "$host_cpu" = "armv7l"],[
+ CFLAGS="$CFLAGS -mcpu=cortex-a9 -mtune=cortex-a9 -O1"
+])
-[
-#if test "x$ARCHTYPE" = "xx86" -a "x$host_cpu" != "xi386" -a "x$host_cpu" != "xi486" -a "x$host_cpu" != "xi586"; then
-#For now, using lock; addl compatibility mode even for i686, because the
-#Pentium III is seen as a i686, but lacks mfence instruction.
-#Only using fence for x86_64.
-if test "x$ARCHTYPE" = "xx86" -a "x$host_cpu" != "xi386" -a "x$host_cpu" != "xi486" -a "x$host_cpu" != "xi586" -a "x$host_cpu" != "xi686"; then
-]
- AC_DEFINE([CONFIG_RCU_HAVE_FENCE], [1])
-[
-fi
-]
-
-AC_MSG_CHECKING([sys_futex()])
+# ARM-specific checks
+AS_IF([test "x$ARCHTYPE" = "xarm"],[
+ AC_MSG_CHECKING([for dmb instruction])
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[asm volatile("dmb":::"memory");]])],[
+ AC_MSG_RESULT([yes])
+ AC_DEFINE([CONFIG_RCU_ARM_HAVE_DMB], [1])
+ ],[
+ AC_MSG_RESULT([no])
+ ])
+])
+
+# x86-specific checks
+AS_IF([test "x$ARCHTYPE" = "xx86"],[
+ AC_MSG_CHECKING([if architecture really supports the mfence instruction])
+ #For now, using lock; addl compatibility mode even for i686, because the
+ #Pentium III is seen as a i686, but lacks mfence instruction.
+ #Only using fence for x86_64.
+ AS_IF([test "x$host_cpu" != "xi386" -a "x$host_cpu" != "xi486" -a "x$host_cpu" != "xi586" -a "x$host_cpu" != "xi686"],[
+ AC_MSG_RESULT([yes])
+ AC_DEFINE([CONFIG_RCU_HAVE_FENCE], [1])
+ ],[
+ AC_MSG_RESULT([no])
+ ])
+])
+
+# Check if sys_futex() is available
+AC_MSG_CHECKING([for sys_futex()])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
-#include <sys/syscall.h>
-]], [[
-#ifndef __NR_futex
-#error "futexes not available"
-#endif
-]])],[
+ #include <sys/syscall.h>
+ ]],[[
+ #ifndef __NR_futex
+ #error "futexes not available"
+ #endif
+ ]])
+],[
AC_MSG_RESULT([yes])
AC_DEFINE([CONFIG_RCU_HAVE_FUTEX], [1])
compat_futex_test=0
-
],[
AC_MSG_RESULT([no])
compat_futex_test=1
-
])
-AM_CONDITIONAL([COMPAT_FUTEX], [ test "x$compat_futex_test" = "x1" ])
+AM_CONDITIONAL([COMPAT_FUTEX], [test "x$compat_futex_test" = "x1"])
+AM_CONDITIONAL([COMPAT_ARCH], [test "x$SUBARCHTYPE" = "xx86compat"])
-AM_CONDITIONAL([COMPAT_ARCH], [test "x$SUBARCHTYPE" = xx86compat ])
+# smp-support configure option
+AC_ARG_ENABLE([smp-support],
+ AS_HELP_STRING([--disable-smp-support], [Disable SMP support. Warning: only use this on uniprocessor systems. [default=enabled]]),
+ [def_smp_support=$enableval],
+ [def_smp_support="yes"])
+AS_IF([test "x$def_smp_support" = "xyes"], [AC_DEFINE([CONFIG_RCU_SMP], [1])])
-[
-if test "x$SUBARCHTYPE" = xx86compat; then
-]
- AC_DEFINE([CONFIG_RCU_COMPAT_ARCH], [1])
-[
-fi
-]
-
-AC_ARG_ENABLE([smp-support], [ --disable-smp-support Disable SMP support. Warning: only use this
- on uniprocessor systems. [[default=enabled]]], [def_smp_support=$enableval], [def_smp_support="yes"])
-
-[
-if test "$def_smp_support" = "no"; then
- echo "SMP support disabled."
-else
-]
- AC_DEFINE([CONFIG_RCU_SMP], [1])
-[
- echo "SMP support enabled."
-fi
-]
# From the sched_setaffinity(2)'s man page:
# ~~~~
# int sched_setaffinity (pid_t __pid, const cpu_set_t *__mask);
# ~~~~
-dnl Since we define _GNU_SOURCE in the sources, must do so too in the
-dnl autoconf tests, as defining _GNU_SOURCE or not exposes
-dnl sched_setaffinity bits differently.
+# Since we define _GNU_SOURCE in the sources, must do so too in the
+# autoconf tests, as defining _GNU_SOURCE or not exposes
+# sched_setaffinity bits differently.
saved_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -D_GNU_SOURCE"
# First check if the function is available at all.
-AC_CHECK_FUNCS(
- [sched_setaffinity],
- [ # Okay, we have it. Check if also have cpu_set_t. If we don't,
- # then we have the first version using unsigned long, and no
- # CPU_ZERO, etc. macros. If we do have cpu_set_t, we may have the
- # version with 2 or 3 arguments. In that case, CPU_ZERO, etc.,
- # should also be present, but we confirm nonetheless.
-
- AC_CHECK_TYPES(
- [cpu_set_t],
- [ # We do have it. Confirm that we have CPU_ZERO, and it actually works.
- AC_MSG_CHECKING([whether CPU_ZERO works])
- AH_TEMPLATE([HAVE_CPU_ZERO],
- [Define to 1 if we have CPU_ZERO and if it works])
- AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [#define _GNU_SOURCE
- #include <sched.h>],
- [cpu_set_t foo; CPU_ZERO (&foo);])
- ],
- [ # Works!
- AC_DEFINE(HAVE_CPU_ZERO, 1)
- AC_MSG_RESULT([yes])
- ],
- [AC_MSG_RESULT([no])]
- )
-
- # Check how many arguments does sched_setaffinity take.
- # Should be 3 or 2.
- AC_MSG_CHECKING([how many arguments sched_setaffinity takes])
- AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [#include <sched.h>],
- [cpu_set_t foo; sched_setaffinity (0, sizeof (foo), &foo);])
- ],
- [sched_set_affinity_args=3],
- [sched_set_affinity_args=2])
- AC_DEFINE_UNQUOTED(SCHED_SETAFFINITY_ARGS, $sched_set_affinity_args,
- [Define to sched_setaffinity's number of arguments.])
- AC_MSG_RESULT([$sched_set_affinity_args])
- ],
- [ # No cpu_set_t, always 3 args.
- AC_DEFINE(SCHED_SETAFFINITY_ARGS, 3) ],
- [#include <sched.h>]
- )
- ]
-)
+AC_CHECK_FUNCS([sched_setaffinity],[
+ # Okay, we have it. Check if also have cpu_set_t. If we don't,
+ # then we have the first version using unsigned long, and no
+ # CPU_ZERO, etc. macros. If we do have cpu_set_t, we may have the
+ # version with 2 or 3 arguments. In that case, CPU_ZERO, etc.,
+ # should also be present, but we confirm nonetheless.
+
+ AC_CHECK_TYPES([cpu_set_t],[
+ # We do have it. Confirm that we have CPU_ZERO, and it actually works.
+ AC_MSG_CHECKING([whether CPU_ZERO works])
+ AH_TEMPLATE([HAVE_CPU_ZERO], [Defined to 1 if we have CPU_ZERO and it works])
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+ #define _GNU_SOURCE
+ #include <sched.h>
+ ]],[[
+ cpu_set_t foo; CPU_ZERO (&foo);
+ ]])
+ ],[
+ # Works!
+ AC_DEFINE(HAVE_CPU_ZERO, 1)
+ AC_MSG_RESULT([yes])
+ ],[
+ AC_MSG_RESULT([no])
+ ])
+
+ # Check how many arguments does sched_setaffinity take.
+ # Should be 3 or 2.
+ AC_MSG_CHECKING([how many arguments sched_setaffinity takes])
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+ #include <sched.h>
+ ]],[[
+ cpu_set_t foo;
+ sched_setaffinity (0, sizeof (foo), &foo);
+ ]])
+ ],
+ [sched_set_affinity_args=3],
+ [sched_set_affinity_args=2])
+ AC_DEFINE_UNQUOTED(SCHED_SETAFFINITY_ARGS, $sched_set_affinity_args,
+ [Defined to sched_setaffinity's number of arguments.])
+ AC_MSG_RESULT([$sched_set_affinity_args])
+ ],[
+ # No cpu_set_t, always 3 args.
+ AC_DEFINE(SCHED_SETAFFINITY_ARGS, 3)
+ ],
+ [#include <sched.h>])
+])
CFLAGS=$saved_CFLAGS
AC_CONFIG_FILES([
Makefile
tests/Makefile
- liburcu-cds.pc
liburcu.pc
liburcu-bp.pc
+ liburcu-cds.pc
liburcu-qsbr.pc
liburcu-mb.pc
liburcu-signal.pc
])
AC_OUTPUT
+
+# Report on selected configure options
+AS_IF([test "x$def_smp_support" = "xyes"],[
+ AS_ECHO("SMP support enabled.")
+],[
+ AS_ECHO("SMP support disabled.")
+])
projects / urcu.git / commitdiff
