+++ /dev/null
-/* ltt-control.c
- *
- * LTT control module over a netlink socket.
- *
- * Inspired from Relay Apps, by Tom Zanussi and iptables
- *
- * Copyright 2005 -
- * Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ltt-core.h>
-#include <linux/netlink.h>
-#include <linux/inet.h>
-#include <linux/ip.h>
-#include <linux/security.h>
-#include <linux/skbuff.h>
-#include <linux/types.h>
-#include <net/sock.h>
-#include "ltt-control.h"
-
-
-#define LTTCTLM_BASE 0x10
-#define LTTCTLM_CONTROL (LTTCTLM_BASE + 1) /* LTT control message */
-
-static struct sock *socket;
-
-void ltt_control_input(struct sock *sk, int len)
-{
- struct sk_buff *skb;
- struct nlmsghdr *nlh = NULL;
- u8 *payload = NULL;
- lttctl_peer_msg_t *msg;
- int err;
-
- printk(KERN_ALERT "ltt-control ltt_control_input\n");
-
- while ((skb = skb_dequeue(&sk->sk_receive_queue))
- != NULL) {
-
- nlh = (struct nlmsghdr *)skb->data;
-
- if(security_netlink_recv(skb)) {
- netlink_ack(skb, nlh, EPERM);
- kfree_skb(skb);
- continue;
- }
-
- /* process netlink message pointed by skb->data */
- err = EINVAL;
- payload = NLMSG_DATA(nlh);
- /* process netlink message with header pointed by
- * nlh and payload pointed by payload
- */
- if(nlh->nlmsg_len != sizeof(lttctl_peer_msg_t) + sizeof(struct nlmsghdr)) {
- printk(KERN_ALERT "ltt-control bad message length\n");
- netlink_ack(skb, nlh, EINVAL);
- kfree_skb(skb);
- continue;
- }
- msg = (lttctl_peer_msg_t*)payload;
-
- switch(msg->op) {
- case OP_CREATE:
- err = ltt_control(LTT_CONTROL_CREATE_TRACE, msg->trace_name,
- msg->args);
- break;
- case OP_DESTROY:
- err = ltt_control(LTT_CONTROL_DESTROY_TRACE, msg->trace_name,
- msg->args);
- break;
- case OP_START:
- err = ltt_control(LTT_CONTROL_START, msg->trace_name,
- msg->args);
- break;
- case OP_STOP:
- err = ltt_control(LTT_CONTROL_STOP, msg->trace_name,
- msg->args);
- break;
- default:
- err = EBADRQC;
- printk(KERN_INFO "ltt-control invalid operation\n");
- }
- netlink_ack(skb, nlh, err);
- kfree_skb(skb);
- }
-}
-
-
-static int ltt_control_init(void)
-{
- printk(KERN_ALERT "ltt-control init\n");
-
- socket = netlink_kernel_create(NETLINK_LTT, 1,
- ltt_control_input, THIS_MODULE);
- if(socket == NULL) return -EPERM;
- else return 0;
-}
-
-static void ltt_control_exit(void)
-{
- printk(KERN_ALERT "ltt-control exit\n");
-
- sock_release(socket->sk_socket);
-}
-
-
-module_init(ltt_control_init)
-module_exit(ltt_control_exit)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mathieu Desnoyers");
-MODULE_DESCRIPTION("Linux Trace Toolkit Controller");
-
+++ /dev/null
-#ifndef _LTT_CONTROL_H
-#define _LTT_CONTROL_H
-
-
-//enum trace_mode {
-// TRACE_NORMAL,
-// TRACE_FLIGHT
-//};
-
-enum trace_op {
- OP_CREATE,
- OP_DESTROY,
- OP_START,
- OP_STOP,
- OP_ALIGN,
- OP_NONE
-};
-
-typedef struct lttctl_peer_msg {
- char trace_name[NAME_MAX];
- enum trace_op op;
- union ltt_control_args args;
-} lttctl_peer_msg_t;
-
-#endif //_LTT_CONTROL_H
-
+++ /dev/null
-Linux Trace Toolkit Viewer
-
-Contributors :
-
-Michel Dagenais (New trace format, lttv main)
-Mathieu Desnoyers (Kernel Tracer, Directory structure, build with automake/conf,
- lttv gui, control flow view, gui cooperative trace reading
- scheduler with interruptible foreground and background
- computation, detailed event list (rewrite), trace reading
- library (rewrite))
-Benoit Des Ligneris, Éric Clement (Cluster adaptation, work in progress)
-Xang-Xiu Yang (trace reading library and converter, lttv gui,
- detailed event list and statistics view)
-Tom Zanussi (RelayFS)
-
-Strongly inspired from the original Linux Trace Toolkit Visualizer made by
-Karim Yaghmour.
-
-Linux Trace Toolkit Viewer, Copyright (C) 2004
- Michel Dagenais
- Mathieu Desnoyers
- Xang-Xiu Yang
-Linux Trace Toolkit comes with ABSOLUTELY NO WARRANTY.
-This is free software, and you are welcome to redistribute it
-under certain conditions. See COPYING for details.
+++ /dev/null
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-\f
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-\f
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-\f
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-\f
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-\f
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
+++ /dev/null
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
-
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
- These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# Makefile. Generated from Makefile.in by configure.
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-srcdir = .
-top_srcdir = .
-
-pkgdatadir = $(datadir)/ltt-control
-pkglibdir = $(libdir)/ltt-control
-pkgincludedir = $(includedir)/ltt-control
-top_builddir = .
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /usr/bin/install -c
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = i686-pc-linux-gnu
-ACLOCAL = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run aclocal-1.7
-AMDEP_FALSE = #
-AMDEP_TRUE =
-AMTAR = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoconf
-AUTOHEADER = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoheader
-AUTOMAKE = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run automake-1.7
-AWK = mawk
-BASH = /bin/sh
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2
-CPP = gcc -E
-CPPFLAGS =
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEFAULT_INCLUDES = -I$(top_srcdir) -I$(top_builddir)
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C =
-ECHO_N = -n
-ECHO_T =
-EGREP = /bin/grep -E
-EXEEXT =
-F77 =
-FFLAGS =
-GREP = /bin/grep
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-LDFLAGS =
-LIBOBJS =
-LIBS =
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS =
-MAKEINFO = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run makeinfo
-OBJEXT = o
-PACKAGE = ltt-control
-PACKAGE_BUGREPORT = BUG-REPORT-ADDRESS
-PACKAGE_CFLAGS = -Wall -Wformat
-PACKAGE_LIBS =
-PACKAGE_NAME = FULL-PACKAGE-NAME
-PACKAGE_STRING = FULL-PACKAGE-NAME VERSION
-PACKAGE_TARNAME = full-package-name
-PACKAGE_VERSION = VERSION
-PATH_SEPARATOR = :
-RANLIB = ranlib
-SET_MAKE =
-SHELL = /bin/sh
-STRIP = strip
-THREAD_LIBS = -lpthread
-UTIL_LIBS = -lutil
-VERSION = 0.24-17092006
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 =
-am__fastdepCC_FALSE = #
-am__fastdepCC_TRUE =
-am__fastdepCXX_FALSE = #
-am__fastdepCXX_TRUE =
-am__include = include
-am__leading_dot = .
-am__quote =
-bindir = ${exec_prefix}/bin
-build = i686-pc-linux-gnu
-build_alias =
-build_cpu = i686
-build_os = linux-gnu
-build_vendor = pc
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = i686-pc-linux-gnu
-host_alias =
-host_cpu = i686
-host_os = linux-gnu
-host_vendor = pc
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = /usr/src/ltt-control-0.24-17092006/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-lttctlincludedir = ${prefix}/include/liblttctl
-mandir = ${datarootdir}/man
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-sysconfdir = ${prefix}/etc
-target_alias =
-SUBDIRS = liblttctl lttctl lttd facilities
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
- ps-recursive install-info-recursive uninstall-info-recursive \
- all-recursive install-data-recursive install-exec-recursive \
- installdirs-recursive install-recursive uninstall-recursive \
- check-recursive installcheck-recursive
-DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \
- COPYING ChangeLog INSTALL Makefile.am NEWS aclocal.m4 \
- config.guess config.h.in config.sub configure configure.in \
- depcomp install-sh ltmain.sh missing mkinstalldirs
-DIST_SUBDIRS = $(SUBDIRS)
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-
-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
- cd $(srcdir) && $(AUTOCONF)
-
-$(ACLOCAL_M4): configure.in
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-
-$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOHEADER)
- touch $(srcdir)/config.h.in
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if (etags --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- else \
- include_option=--include; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = .
-distdir = $(PACKAGE)-$(VERSION)
-
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" \
- distdir=../$(distdir)/$$subdir \
- distdir) \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist dist-all: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- $(am__remove_distdir)
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
- && rm -f $(distdir).tar.gz \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @echo "$(distdir).tar.gz is ready for distribution" | \
- sed 'h;s/./=/g;p;x;p;x'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
- distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
- clean-generic clean-libtool clean-recursive ctags \
- ctags-recursive dist dist-all dist-gzip distcheck distclean \
- distclean-generic distclean-hdr distclean-libtool \
- distclean-recursive distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am dvi-recursive info info-am \
- info-recursive install install-am install-data install-data-am \
- install-data-recursive install-exec install-exec-am \
- install-exec-recursive install-info install-info-am \
- install-info-recursive install-man install-recursive \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am installdirs-recursive maintainer-clean \
- maintainer-clean-generic maintainer-clean-recursive mostlyclean \
- mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
- pdf pdf-am pdf-recursive ps ps-am ps-recursive tags \
- tags-recursive uninstall uninstall-am uninstall-info-am \
- uninstall-info-recursive uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-SUBDIRS = liblttctl lttctl lttd facilities
-
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_CFLAGS = @PACKAGE_CFLAGS@
-PACKAGE_LIBS = @PACKAGE_LIBS@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-THREAD_LIBS = @THREAD_LIBS@
-UTIL_LIBS = @UTIL_LIBS@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lttctlincludedir = @lttctlincludedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-SUBDIRS = liblttctl lttctl lttd facilities
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
- ps-recursive install-info-recursive uninstall-info-recursive \
- all-recursive install-data-recursive install-exec-recursive \
- installdirs-recursive install-recursive uninstall-recursive \
- check-recursive installcheck-recursive
-DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \
- COPYING ChangeLog INSTALL Makefile.am NEWS aclocal.m4 \
- config.guess config.h.in config.sub configure configure.in \
- depcomp install-sh ltmain.sh missing mkinstalldirs
-DIST_SUBDIRS = $(SUBDIRS)
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-
-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
- cd $(srcdir) && $(AUTOCONF)
-
-$(ACLOCAL_M4): configure.in
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-
-$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOHEADER)
- touch $(srcdir)/config.h.in
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if (etags --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- else \
- include_option=--include; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = .
-distdir = $(PACKAGE)-$(VERSION)
-
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" \
- distdir=../$(distdir)/$$subdir \
- distdir) \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist dist-all: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- $(am__remove_distdir)
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
- && rm -f $(distdir).tar.gz \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @echo "$(distdir).tar.gz is ready for distribution" | \
- sed 'h;s/./=/g;p;x;p;x'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
- distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
- clean-generic clean-libtool clean-recursive ctags \
- ctags-recursive dist dist-all dist-gzip distcheck distclean \
- distclean-generic distclean-hdr distclean-libtool \
- distclean-recursive distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am dvi-recursive info info-am \
- info-recursive install install-am install-data install-data-am \
- install-data-recursive install-exec install-exec-am \
- install-exec-recursive install-info install-info-am \
- install-info-recursive install-man install-recursive \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am installdirs-recursive maintainer-clean \
- maintainer-clean-generic maintainer-clean-recursive mostlyclean \
- mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
- pdf pdf-am pdf-recursive ps ps-am ps-recursive tags \
- tags-recursive uninstall uninstall-am uninstall-info-am \
- uninstall-info-recursive uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-
-This package contains the lttd, lttctl and liblttctl programs which are
-necessary to obtain a trace. It also contains the facilities directory, where
-sits the trace metainformation.
-
-* Compiling
-
-gcc 3.2 or better
-glib 2.4 or better development libraries
- (Debian : libglib2.0-0, libglib2.0-dev)
- (Fedora : glib2, glib2-devel)
-libc6 development librairies
- (Debian : libc6, libc6-dev)
- (Fedora : glibc, glibc)
-
-
-To compile the source tree from a tarball, simply follow these steps :
-
-- ./configure
-- make
-- make install
-
-After running ./configure, you can also go in specific subdirectories and
-use make, make install.
-
-
-* Quick Start
-
-See the LTTV package QUICKSTART
-
-* Source Tree Structure
-
-Here is the tree structure of the Linux Trace Toolkit Viewer package.
-
-ltt: new trace format reading library.
-README: This file.
-liblttctl: Library to communicate with the kernel tracer control module.
-lttctl: Command line program to use the liblttctl library.
-lttd: Linux Trace Toolkit daemon.
-
-
-* For Developers
-
-This source tree is based on the autotools suite from GNU to simplify
-portability. Here are some things you should have on your system in order to
-compile the subversion repository tree :
-
-
-GNU autotools (automake-1,7, autoconf2.50, autoheader2.50)
-(make sure your system wide "automake" points to version 1.7!)
-GNU Libtool
-(for more information, go to http://www.gnu.org/software/autoconf/)
-
-If you get the tree from the repository, you will need to use the autogen.sh
-script. It calls all the GNU tools needed to prepare the tree configuration.
-
-
-
-Mathieu Desnoyers
+++ /dev/null
-# generated automatically by aclocal 1.7.9 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# This macro actually does too much some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 10
-
-AC_PREREQ([2.54])
-
-# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
-# the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $1 | $1:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.7.9])])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright 2001, 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# -*- Autoconf -*-
-
-
-# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# AM_AUX_DIR_EXPAND
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-# Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_AUX_DIR_EXPAND], [
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# AM_PROG_INSTALL_STRIP
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# -*- Autoconf -*-
-# Copyright (C) 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# serial 5 -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- : > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # (even with -Werror). So we grep stderr for any message
- # that says an option was ignored.
- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking Speeds up one-time builds
- --enable-dependency-tracking Do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-#serial 2
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
- test -z "$DEPDIR" && continue
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n -e '/^U = / s///p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n -e '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 5
-
-AC_PREREQ(2.52)
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.])
-fi])])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
-
-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_PREREQ([2.52])
-
-# serial 6
-
-# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-
-# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
-
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
- [],
- [m4_define([AC_PROVIDE_IFELSE],
- [m4_ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
- ])])
-dnl And a similar setup for Fortran 77 support
- AC_PROVIDE_IFELSE([AC_PROG_F77],
- [AC_LIBTOOL_F77],
- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([LT_AC_PROG_GCJ],
- [define([LT_AC_PROG_GCJ],
- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
- fi
- ;;
-esac
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
- [AC_HELP_STRING([--with-pic],
- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
- [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_LINKER_BOILERPLATE
-
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-[$]*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_PUSH(C)
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
- ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- fi
- $rm conftest*
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$5], , :, [$5])
-else
- ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
- [$2=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $3"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- else
- $2=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$4], , :, [$4])
-else
- ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- ;;
- esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
- AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
- [$4]
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}]
-EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) $1 ;;
- x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
- esac
- else :
- # compilation failed
- $3
- fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ])
- ;;
-
- *)
- AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
- [AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
- [AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
- [AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
- [AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
- [AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
- ])
- ])
- ])
- ])
- ])
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- AC_CACHE_CHECK([whether a program can dlopen itself],
- lt_cv_dlopen_self, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
- ])
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
- ])
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- fi
- fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
- # Linking always hardcodes the temporary library directory.
- _LT_AC_TAGVAR(hardcode_action, $1)=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
-fi
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
- esac
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[[45]]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[123]]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
- [include additional configurations @<:@automatic@:>@])],
- [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- AC_MSG_WARN([output file `$ofile' does not exist])
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
- else
- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
- "") ;;
- *) AC_MSG_ERROR([invalid tag name: $tagname])
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- AC_MSG_ERROR([tag name \"$tagname\" already exists])
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_LIBTOOL_LANG_CXX_CONFIG
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
- AC_LIBTOOL_LANG_F77_CONFIG
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
- AC_LIBTOOL_LANG_GCJ_CONFIG
- else
- tagname=""
- fi
- ;;
-
- RC)
- AC_LIBTOOL_LANG_RC_CONFIG
- ;;
-
- *)
- AC_MSG_ERROR([Unsupported tag name: $tagname])
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- AC_MSG_ERROR([unable to update list of available tagged configurations.])
- fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
- [AC_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by $CC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
- lt_cv_ld_reload_flag,
- [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[[45]]*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump'.
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix3*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!). If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, lt_dlinit,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- LTDLINCL=
- fi
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
- AC_PROG_LD
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes ; then
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- fi
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- freebsd[[12]]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- freebsd-elf*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- ;;
- *)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- interix3*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
- fi
- fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- esac
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc*)
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC*)
- # Portland Group C++ compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- openbsd*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
- $rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The C++ compiler is used as linker so we must use $wl
- # flag to pass the commands to the underlying system
- # linker. We must also pass each convience library through
- # to the system linker between allextract/defaultextract.
- # The C++ compiler will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
- ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- fi
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- fi
- ;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
- _LT_AC_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
- fi
- else
- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix3*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_AC_TAGVAR(predep_objects,$1)=
- _LT_AC_TAGVAR(postdep_objects,$1)=
- _LT_AC_TAGVAR(postdeps,$1)=
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
- ;;
- esac
- ;;
-esac
-])
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code=" subroutine t\n return\n end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code=" program t\n end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars. Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- _LT_AC_TAGVAR(compiler, $1) \
- _LT_AC_TAGVAR(CC, $1) \
- _LT_AC_TAGVAR(LD, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
- _LT_AC_TAGVAR(old_archive_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
- _LT_AC_TAGVAR(predep_objects, $1) \
- _LT_AC_TAGVAR(postdep_objects, $1) \
- _LT_AC_TAGVAR(predeps, $1) \
- _LT_AC_TAGVAR(postdeps, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
- _LT_AC_TAGVAR(archive_cmds, $1) \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
- _LT_AC_TAGVAR(postinstall_cmds, $1) \
- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
- _LT_AC_TAGVAR(no_undefined_flag, $1) \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
- _LT_AC_TAGVAR(hardcode_automatic, $1) \
- _LT_AC_TAGVAR(module_cmds, $1) \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
- _LT_AC_TAGVAR(exclude_expsyms, $1) \
- _LT_AC_TAGVAR(include_expsyms, $1); do
-
- case $var in
- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
- _LT_AC_TAGVAR(archive_cmds, $1) | \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(module_cmds, $1) | \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\[$]0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
- ;;
- esac
-
-ifelse([$1], [],
- [cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- AC_MSG_NOTICE([creating $ofile])],
- [cfgfile="$ofile"])
-
- cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-])
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
- lt_cv_prog_compiler_rtti_exceptions,
- [-fno-rtti -fno-exceptions], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDEGRST]]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux* | k*bsd*-gnu)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDGIRSTW]]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris*)
- symcode='[[BDRT]]'
- ;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | os2* | pw32*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix4* | aix5*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- chorus*)
- case $cc_basename in
- cxch68*)
- # Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
- ;;
- esac
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
- dgux*)
- case $cc_basename in
- ec++*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- freebsd* | dragonfly*)
- # FreeBSD uses GNU C++
- ;;
- hpux9* | hpux10* | hpux11*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- fi
- ;;
- aCC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- ;;
- *)
- ;;
- esac
- ;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
- irix5* | irix6* | nonstopux*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- # CC pic flag -KPIC is the default.
- ;;
- *)
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # KAI C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- icpc* | ecpc*)
- # Intel C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgCC*)
- # Portland Group C++ compiler.
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- cxx*)
- # Compaq C++
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- lynxos*)
- ;;
- m88k*)
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
- ;;
- *)
- ;;
- esac
- ;;
- netbsd* | netbsdelf*-gnu)
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- cxx*)
- # Digital/Compaq C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- psos*)
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- ;;
- *)
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- lcc*)
- # Lucid
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- *)
- ;;
- esac
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
- ;;
- vxworks*)
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-],
-[
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
-
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC (with -KPIC) is the default.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- ccc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All Alpha code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All OSF/1 code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- unicos*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
- "" | " "*) ;;
- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
- esac],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
- $lt_tmp_static_flag,
- [],
- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- case $host_os in
- aix4* | aix5*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
- cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- linux* | k*bsd*-gnu)
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
-],[
- runpath_var=
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)=
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
- _LT_AC_TAGVAR(module_cmds, $1)=
- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- _LT_AC_TAGVAR(include_expsyms, $1)=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- _LT_CC_BASENAME([$compiler])
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- interix3*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
-
- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
- runpath_var=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- # see comment about different semantics on the GNU ld section
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- bsdi[[45]]*)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- freebsd1*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- openbsd*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- ;;
-
- os2*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl, iff we do not link with $LD.
- # Luckily, gcc supports the same syntax we need for Sun Studio.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- case $wlarc in
- '')
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
- *)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- esac ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- ;;
- motorola)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4.3*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
-])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
- # Assume -lc should be added
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_AC_TAGVAR(archive_cmds, $1) in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
- ;;
- esac
- fi
- ;;
-esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
-])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_SED. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-])
-SED=$lt_cv_path_SED
-AC_MSG_RESULT([$SED])
-])
-
-# isc-posix.m4 serial 2 (gettext-0.11.2)
-dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
-
-# This test replaces the one in autoconf.
-# Currently this macro should have the same name as the autoconf macro
-# because gettext's gettext.m4 (distributed in the automake package)
-# still uses it. Otherwise, the use in gettext.m4 makes autoheader
-# give these diagnostics:
-# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
-# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
-
-undefine([AC_ISC_POSIX])
-
-AC_DEFUN([AC_ISC_POSIX],
- [
- dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
- AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
- ]
-)
-
-
-# Copyright 1996, 1997, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# @defmac AC_PROG_CC_STDC
-# @maindex PROG_CC_STDC
-# @ovindex CC
-# If the C compiler in not in ANSI C mode by default, try to add an option
-# to output variable @code{CC} to make it so. This macro tries various
-# options that select ANSI C on some system or another. It considers the
-# compiler to be in ANSI C mode if it handles function prototypes correctly.
-#
-# If you use this macro, you should check after calling it whether the C
-# compiler has been set to accept ANSI C; if not, the shell variable
-# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
-# code in ANSI C, you can make an un-ANSIfied copy of it by using the
-# program @code{ansi2knr}, which comes with Ghostscript.
-# @end defmac
-
-AC_DEFUN([AM_PROG_CC_STDC],
-[AC_REQUIRE([AC_PROG_CC])
-AC_BEFORE([$0], [AC_C_INLINE])
-AC_BEFORE([$0], [AC_C_CONST])
-dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
-dnl a magic option to avoid problems with ANSI preprocessor commands
-dnl like #elif.
-dnl FIXME: can't do this because then AC_AIX won't work due to a
-dnl circular dependency.
-dnl AC_BEFORE([$0], [AC_PROG_CPP])
-AC_MSG_CHECKING([for ${CC-cc} option to accept ANSI C])
-AC_CACHE_VAL(am_cv_prog_cc_stdc,
-[am_cv_prog_cc_stdc=no
-ac_save_CC="$CC"
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- AC_TRY_COMPILE(
-[#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-], [
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-],
-[am_cv_prog_cc_stdc="$ac_arg"; break])
-done
-CC="$ac_save_CC"
-])
-if test -z "$am_cv_prog_cc_stdc"; then
- AC_MSG_RESULT([none needed])
-else
- AC_MSG_RESULT([$am_cv_prog_cc_stdc])
-fi
-case "x$am_cv_prog_cc_stdc" in
- x|xno) ;;
- *) CC="$CC $am_cv_prog_cc_stdc" ;;
-esac
-])
-
-AU_DEFUN([fp_PROG_CC_STDC], [AM_PROG_CC_STDC])
-
+++ /dev/null
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-timestamp='2006-02-23'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- *:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerppc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep __LP64__ >/dev/null
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- case ${UNAME_MACHINE} in
- pc98)
- echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- esac
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:MSYS_NT-*:*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- x86:Interix*:[345]*)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T:Interix*:[345]*)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit ;;
- crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
- exit ;;
- frv:Linux:*:*)
- echo frv-unknown-linux-gnu
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips64
- #undef mips64el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mips64el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips64
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- or32:Linux:*:*)
- echo or32-unknown-linux-gnu
- exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
- exit ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun)
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^LIBC/{
- s: ::g
- p
- }'`"
- test x"${LIBC}" != x && {
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit
- }
- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit ;;
- i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit ;;
- i*86:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
- exit ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms ; exit ;;
- I*) echo ia64-dec-vms ; exit ;;
- V*) echo vax-dec-vms ; exit ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit ;;
- i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
- exit ;;
- i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
- exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
-and
- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-/* config.h. Generated from config.h.in by configure. */
-/* config.h.in. Generated from configure.in by autoheader. */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#define HAVE_DLFCN_H 1
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#define HAVE_FCNTL_H 1
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#define HAVE_INTTYPES_H 1
-
-/* Define to 1 if you have the <memory.h> header file. */
-#define HAVE_MEMORY_H 1
-
-/* Define to 1 if you have the <pthread.h> header file. */
-#define HAVE_PTHREAD_H 1
-
-/* Define to 1 if you have the `select' function. */
-#define HAVE_SELECT 1
-
-/* Define to 1 if stdbool.h conforms to C99. */
-#define HAVE_STDBOOL_H 1
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#define HAVE_STDINT_H 1
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define to 1 if you have the <strings.h> header file. */
-#define HAVE_STRINGS_H 1
-
-/* Define to 1 if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define to 1 if you have the <sys/select.h> header file. */
-#define HAVE_SYS_SELECT_H 1
-
-/* Define to 1 if you have the <sys/socket.h> header file. */
-#define HAVE_SYS_SOCKET_H 1
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#define HAVE_SYS_STAT_H 1
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#define HAVE_SYS_TIME_H 1
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#define HAVE_UNISTD_H 1
-
-/* Define to 1 if the system has the type `_Bool'. */
-#define HAVE__BOOL 1
-
-/* Name of package */
-#define PACKAGE "ltt-control"
-
-/* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT "BUG-REPORT-ADDRESS"
-
-/* Define to the full name of this package. */
-#define PACKAGE_NAME "FULL-PACKAGE-NAME"
-
-/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "FULL-PACKAGE-NAME VERSION"
-
-/* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME "full-package-name"
-
-/* Define to the version of this package. */
-#define PACKAGE_VERSION "VERSION"
-
-/* Define to the type of arg 1 for `select'. */
-#define SELECT_TYPE_ARG1 int
-
-/* Define to the type of args 2, 3 and 4 for `select'. */
-#define SELECT_TYPE_ARG234 (fd_set *)
-
-/* Define to the type of arg 5 for `select'. */
-#define SELECT_TYPE_ARG5 (struct timeval *)
-
-/* Define to 1 if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#define TIME_WITH_SYS_TIME 1
-
-/* Version number of package */
-#define VERSION "0.24-17092006"
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#define _FILE_OFFSET_BITS 64
-
-/* Define for large files, on AIX-style hosts. */
-/* #undef _LARGE_FILES */
-
-/* Define to empty if `const' does not conform to ANSI C. */
-/* #undef const */
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
- calls it, or to nothing if 'inline' is not supported under any name. */
-#ifndef __cplusplus
-/* #undef inline */
-#endif
-
-/* Define to `long int' if <sys/types.h> does not define. */
-/* #undef off_t */
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-/* #undef size_t */
+++ /dev/null
-/* config.h.in. Generated from configure.in by autoheader. */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <pthread.h> header file. */
-#undef HAVE_PTHREAD_H
-
-/* Define to 1 if you have the `select' function. */
-#undef HAVE_SELECT
-
-/* Define to 1 if stdbool.h conforms to C99. */
-#undef HAVE_STDBOOL_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/select.h> header file. */
-#undef HAVE_SYS_SELECT_H
-
-/* Define to 1 if you have the <sys/socket.h> header file. */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if the system has the type `_Bool'. */
-#undef HAVE__BOOL
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to the type of arg 1 for `select'. */
-#undef SELECT_TYPE_ARG1
-
-/* Define to the type of args 2, 3 and 4 for `select'. */
-#undef SELECT_TYPE_ARG234
-
-/* Define to the type of arg 5 for `select'. */
-#undef SELECT_TYPE_ARG5
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Version number of package */
-#undef VERSION
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
- calls it, or to nothing if 'inline' is not supported under any name. */
-#ifndef __cplusplus
-#undef inline
-#endif
-
-/* Define to `long int' if <sys/types.h> does not define. */
-#undef off_t
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef size_t
+++ /dev/null
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by FULL-PACKAGE-NAME configure VERSION, which was
-generated by GNU Autoconf 2.60. Invocation command line was
-
- $ ./configure
-
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = ubuntujov
-uname -m = i686
-uname -r = 2.6.17-lttng-0.5.113
-uname -s = Linux
-uname -v = #40 PREEMPT Tue Dec 5 15:02:52 EST 2006
-
-/usr/bin/uname -p = unknown
-/bin/uname -X = unknown
-
-/bin/arch = i686
-/usr/bin/arch -k = unknown
-/usr/convex/getsysinfo = unknown
-/usr/bin/hostinfo = unknown
-/bin/machine = unknown
-/usr/bin/oslevel = unknown
-/bin/universe = unknown
-
-PATH: /usr/local/sbin
-PATH: /usr/local/bin
-PATH: /usr/sbin
-PATH: /usr/bin
-PATH: /sbin
-PATH: /bin
-PATH: /usr/X11R6/bin
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-configure:1964: checking for a BSD-compatible install
-configure:2020: result: /usr/bin/install -c
-configure:2031: checking whether build environment is sane
-configure:2074: result: yes
-configure:2107: checking for gawk
-configure:2137: result: no
-configure:2107: checking for mawk
-configure:2123: found /usr/bin/mawk
-configure:2134: result: mawk
-configure:2145: checking whether make sets $(MAKE)
-configure:2166: result: yes
-configure:2426: checking build system type
-configure:2444: result: i686-pc-linux-gnu
-configure:2466: checking host system type
-configure:2481: result: i686-pc-linux-gnu
-configure:2515: checking for style of include used by make
-configure:2543: result: GNU
-configure:2616: checking for gcc
-configure:2632: found /usr/bin/gcc
-configure:2643: result: gcc
-configure:2881: checking for C compiler version
-configure:2888: gcc --version >&5
-gcc (GCC) 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
-Copyright (C) 2006 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:2891: $? = 0
-configure:2898: gcc -v >&5
-Using built-in specs.
-Target: i486-linux-gnu
-Configured with: ../src/configure -v --enable-languages=c,c++,java,f95,objc,ada,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.0 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-java-awt=gtk-default --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-4.0-1.4.2.0/jre --enable-mpfr --disable-werror --with-tune=pentium4 --enable-checking=release i486-linux-gnu
-Thread model: posix
-gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
-configure:2901: $? = 0
-configure:2908: gcc -V >&5
-gcc: '-V' option must have argument
-configure:2911: $? = 1
-configure:2934: checking for C compiler default output file name
-configure:2961: gcc conftest.c >&5
-configure:2964: $? = 0
-configure:3010: result: a.out
-configure:3015: checking whether the C compiler works
-configure:3025: ./a.out
-configure:3028: $? = 0
-configure:3045: result: yes
-configure:3052: checking whether we are cross compiling
-configure:3054: result: no
-configure:3057: checking for suffix of executables
-configure:3064: gcc -o conftest conftest.c >&5
-configure:3067: $? = 0
-configure:3091: result:
-configure:3097: checking for suffix of object files
-configure:3123: gcc -c conftest.c >&5
-configure:3126: $? = 0
-configure:3149: result: o
-configure:3153: checking whether we are using the GNU C compiler
-configure:3182: gcc -c conftest.c >&5
-configure:3188: $? = 0
-configure:3195: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:3198: $? = 0
-configure:3205: test -s conftest.o
-configure:3208: $? = 0
-configure:3222: result: yes
-configure:3227: checking whether gcc accepts -g
-configure:3257: gcc -c -g conftest.c >&5
-configure:3263: $? = 0
-configure:3270: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:3273: $? = 0
-configure:3280: test -s conftest.o
-configure:3283: $? = 0
-configure:3413: result: yes
-configure:3430: checking for gcc option to accept ISO C89
-configure:3504: gcc -c -g -O2 conftest.c >&5
-configure:3510: $? = 0
-configure:3517: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:3520: $? = 0
-configure:3527: test -s conftest.o
-configure:3530: $? = 0
-configure:3550: result: none needed
-configure:3570: checking dependency style of gcc
-configure:3653: result: gcc3
-configure:3670: checking for a sed that does not truncate output
-configure:3724: result: /bin/sed
-configure:3727: checking for grep that handles long lines and -e
-configure:3801: result: /bin/grep
-configure:3806: checking for egrep
-configure:3884: result: /bin/grep -E
-configure:3900: checking for ld used by gcc
-configure:3967: result: /usr/bin/ld
-configure:3976: checking if the linker (/usr/bin/ld) is GNU ld
-configure:3991: result: yes
-configure:3996: checking for /usr/bin/ld option to reload object files
-configure:4003: result: -r
-configure:4021: checking for BSD-compatible nm
-configure:4070: result: /usr/bin/nm -B
-configure:4074: checking whether ln -s works
-configure:4078: result: yes
-configure:4085: checking how to recognise dependent libraries
-configure:4261: result: pass_all
-configure:4511: checking how to run the C preprocessor
-configure:4551: gcc -E conftest.c
-configure:4557: $? = 0
-configure:4595: gcc -E conftest.c
-conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
-configure:4601: $? = 1
-configure: failed program was:
-| /* confdefs.h. */
-| #define PACKAGE_NAME "FULL-PACKAGE-NAME"
-| #define PACKAGE_TARNAME "full-package-name"
-| #define PACKAGE_VERSION "VERSION"
-| #define PACKAGE_STRING "FULL-PACKAGE-NAME VERSION"
-| #define PACKAGE_BUGREPORT "BUG-REPORT-ADDRESS"
-| #define PACKAGE "ltt-control"
-| #define VERSION "0.24-17092006"
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:4641: result: gcc -E
-configure:4670: gcc -E conftest.c
-configure:4676: $? = 0
-configure:4714: gcc -E conftest.c
-conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
-configure:4720: $? = 1
-configure: failed program was:
-| /* confdefs.h. */
-| #define PACKAGE_NAME "FULL-PACKAGE-NAME"
-| #define PACKAGE_TARNAME "full-package-name"
-| #define PACKAGE_VERSION "VERSION"
-| #define PACKAGE_STRING "FULL-PACKAGE-NAME VERSION"
-| #define PACKAGE_BUGREPORT "BUG-REPORT-ADDRESS"
-| #define PACKAGE "ltt-control"
-| #define VERSION "0.24-17092006"
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:4765: checking for ANSI C header files
-configure:4795: gcc -c -g -O2 conftest.c >&5
-configure:4801: $? = 0
-configure:4808: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:4811: $? = 0
-configure:4818: test -s conftest.o
-configure:4821: $? = 0
-configure:4917: gcc -o conftest -g -O2 conftest.c >&5
-configure:4920: $? = 0
-configure:4926: ./conftest
-configure:4929: $? = 0
-configure:4946: result: yes
-configure:4970: checking for sys/types.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:4970: checking for sys/stat.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:4970: checking for stdlib.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:4970: checking for string.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:4970: checking for memory.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:4970: checking for strings.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:4970: checking for inttypes.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:4970: checking for stdint.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:4970: checking for unistd.h
-configure:4991: gcc -c -g -O2 conftest.c >&5
-configure:4997: $? = 0
-configure:5004: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5007: $? = 0
-configure:5014: test -s conftest.o
-configure:5017: $? = 0
-configure:5030: result: yes
-configure:5057: checking dlfcn.h usability
-configure:5074: gcc -c -g -O2 conftest.c >&5
-configure:5080: $? = 0
-configure:5087: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:5090: $? = 0
-configure:5097: test -s conftest.o
-configure:5100: $? = 0
-configure:5111: result: yes
-configure:5115: checking dlfcn.h presence
-configure:5130: gcc -E conftest.c
-configure:5136: $? = 0
-configure:5157: result: yes
-configure:5190: checking for dlfcn.h
-configure:5198: result: yes
-configure:5269: checking for g++
-configure:5285: found /usr/bin/g++
-configure:5296: result: g++
-configure:5327: checking for C++ compiler version
-configure:5334: g++ --version >&5
-g++ (GCC) 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
-Copyright (C) 2006 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:5337: $? = 0
-configure:5344: g++ -v >&5
-Using built-in specs.
-Target: i486-linux-gnu
-Configured with: ../src/configure -v --enable-languages=c,c++,java,f95,objc,ada,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.0 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-java-awt=gtk-default --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-4.0-1.4.2.0/jre --enable-mpfr --disable-werror --with-tune=pentium4 --enable-checking=release i486-linux-gnu
-Thread model: posix
-gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
-configure:5347: $? = 0
-configure:5354: g++ -V >&5
-g++: '-V' option must have argument
-configure:5357: $? = 1
-configure:5360: checking whether we are using the GNU C++ compiler
-configure:5389: g++ -c conftest.cpp >&5
-configure:5395: $? = 0
-configure:5402: test -z "$ac_cxx_werror_flag" || test ! -s conftest.err
-configure:5405: $? = 0
-configure:5412: test -s conftest.o
-configure:5415: $? = 0
-configure:5429: result: yes
-configure:5434: checking whether g++ accepts -g
-configure:5464: g++ -c -g conftest.cpp >&5
-configure:5470: $? = 0
-configure:5477: test -z "$ac_cxx_werror_flag" || test ! -s conftest.err
-configure:5480: $? = 0
-configure:5487: test -s conftest.o
-configure:5490: $? = 0
-configure:5620: result: yes
-configure:5645: checking dependency style of g++
-configure:5728: result: gcc3
-configure:5755: checking how to run the C++ preprocessor
-configure:5791: g++ -E conftest.cpp
-configure:5797: $? = 0
-configure:5835: g++ -E conftest.cpp
-conftest.cpp:21:28: error: ac_nonexistent.h: No such file or directory
-configure:5841: $? = 1
-configure: failed program was:
-| /* confdefs.h. */
-| #define PACKAGE_NAME "FULL-PACKAGE-NAME"
-| #define PACKAGE_TARNAME "full-package-name"
-| #define PACKAGE_VERSION "VERSION"
-| #define PACKAGE_STRING "FULL-PACKAGE-NAME VERSION"
-| #define PACKAGE_BUGREPORT "BUG-REPORT-ADDRESS"
-| #define PACKAGE "ltt-control"
-| #define VERSION "0.24-17092006"
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:5881: result: g++ -E
-configure:5910: g++ -E conftest.cpp
-configure:5916: $? = 0
-configure:5954: g++ -E conftest.cpp
-conftest.cpp:21:28: error: ac_nonexistent.h: No such file or directory
-configure:5960: $? = 1
-configure: failed program was:
-| /* confdefs.h. */
-| #define PACKAGE_NAME "FULL-PACKAGE-NAME"
-| #define PACKAGE_TARNAME "full-package-name"
-| #define PACKAGE_VERSION "VERSION"
-| #define PACKAGE_STRING "FULL-PACKAGE-NAME VERSION"
-| #define PACKAGE_BUGREPORT "BUG-REPORT-ADDRESS"
-| #define PACKAGE "ltt-control"
-| #define VERSION "0.24-17092006"
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| /* end confdefs.h. */
-| #include <ac_nonexistent.h>
-configure:6060: checking for g77
-configure:6090: result: no
-configure:6060: checking for f77
-configure:6090: result: no
-configure:6060: checking for xlf
-configure:6090: result: no
-configure:6060: checking for frt
-configure:6090: result: no
-configure:6060: checking for pgf77
-configure:6090: result: no
-configure:6060: checking for cf77
-configure:6090: result: no
-configure:6060: checking for fort77
-configure:6090: result: no
-configure:6060: checking for fl32
-configure:6090: result: no
-configure:6060: checking for af77
-configure:6090: result: no
-configure:6060: checking for f90
-configure:6090: result: no
-configure:6060: checking for xlf90
-configure:6090: result: no
-configure:6060: checking for pgf90
-configure:6090: result: no
-configure:6060: checking for pghpf
-configure:6090: result: no
-configure:6060: checking for epcf90
-configure:6090: result: no
-configure:6060: checking for gfortran
-configure:6090: result: no
-configure:6060: checking for g95
-configure:6090: result: no
-configure:6060: checking for f95
-configure:6090: result: no
-configure:6060: checking for fort
-configure:6090: result: no
-configure:6060: checking for xlf95
-configure:6090: result: no
-configure:6060: checking for ifort
-configure:6090: result: no
-configure:6060: checking for ifc
-configure:6090: result: no
-configure:6060: checking for efc
-configure:6090: result: no
-configure:6060: checking for pgf95
-configure:6090: result: no
-configure:6060: checking for lf95
-configure:6090: result: no
-configure:6060: checking for ftn
-configure:6090: result: no
-configure:6117: checking for Fortran 77 compiler version
-configure:6124: --version >&5
-./configure: line 6125: --version: command not found
-configure:6127: $? = 127
-configure:6134: -v >&5
-./configure: line 6135: -v: command not found
-configure:6137: $? = 127
-configure:6144: -V >&5
-./configure: line 6145: -V: command not found
-configure:6147: $? = 127
-configure:6155: checking whether we are using the GNU Fortran 77 compiler
-configure:6174: -c conftest.F >&5
-./configure: line 6175: -c: command not found
-configure:6180: $? = 127
-configure: failed program was:
-| program main
-| #ifndef __GNUC__
-| choke me
-| #endif
-|
-| end
-configure:6214: result: no
-configure:6220: checking whether accepts -g
-configure:6237: -c -g conftest.f >&5
-./configure: line 6238: -c: command not found
-configure:6243: $? = 127
-configure: failed program was:
-| program main
-|
-| end
-configure:6276: result: no
-configure:6306: checking the maximum length of command line arguments
-configure:6415: result: 32768
-configure:6426: checking command to parse /usr/bin/nm -B output from gcc object
-configure:6531: gcc -c -g -O2 conftest.c >&5
-configure:6534: $? = 0
-configure:6538: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
-configure:6541: $? = 0
-configure:6593: gcc -o conftest -g -O2 conftest.c conftstm.o >&5
-configure:6596: $? = 0
-configure:6634: result: ok
-configure:6638: checking for objdir
-configure:6653: result: .libs
-configure:6745: checking for ar
-configure:6761: found /usr/bin/ar
-configure:6772: result: ar
-configure:6841: checking for ranlib
-configure:6857: found /usr/bin/ranlib
-configure:6868: result: ranlib
-configure:6937: checking for strip
-configure:6953: found /usr/bin/strip
-configure:6964: result: strip
-configure:7250: checking if gcc supports -fno-rtti -fno-exceptions
-configure:7268: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
-cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
-configure:7272: $? = 0
-configure:7285: result: no
-configure:7300: checking for gcc option to produce PIC
-configure:7510: result: -fPIC
-configure:7518: checking if gcc PIC flag -fPIC works
-configure:7536: gcc -c -g -O2 -fPIC -DPIC conftest.c >&5
-configure:7540: $? = 0
-configure:7553: result: yes
-configure:7581: checking if gcc static flag -static works
-configure:7609: result: yes
-configure:7619: checking if gcc supports -c -o file.o
-configure:7640: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5
-configure:7644: $? = 0
-configure:7666: result: yes
-configure:7692: checking whether the gcc linker (/usr/bin/ld) supports shared libraries
-configure:8679: result: yes
-configure:8700: checking whether -lc should be explicitly linked in
-configure:8705: gcc -c -g -O2 conftest.c >&5
-configure:8708: $? = 0
-configure:8723: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1
-configure:8726: $? = 0
-configure:8738: result: no
-configure:8746: checking dynamic linker characteristics
-configure:9322: result: GNU/Linux ld.so
-configure:9331: checking how to hardcode library paths into programs
-configure:9356: result: immediate
-configure:9370: checking whether stripping libraries is possible
-configure:9375: result: yes
-configure:10288: checking if libtool supports shared libraries
-configure:10290: result: yes
-configure:10293: checking whether to build shared libraries
-configure:10314: result: yes
-configure:10317: checking whether to build static libraries
-configure:10321: result: yes
-configure:10413: creating libtool
-configure:11001: checking for ld used by g++
-configure:11068: result: /usr/bin/ld
-configure:11077: checking if the linker (/usr/bin/ld) is GNU ld
-configure:11092: result: yes
-configure:11143: checking whether the g++ linker (/usr/bin/ld) supports shared libraries
-configure:12109: result: yes
-configure:12127: g++ -c -g -O2 conftest.cpp >&5
-configure:12130: $? = 0
-configure:12249: checking for g++ option to produce PIC
-configure:12523: result: -fPIC
-configure:12531: checking if g++ PIC flag -fPIC works
-configure:12549: g++ -c -g -O2 -fPIC -DPIC conftest.cpp >&5
-configure:12553: $? = 0
-configure:12566: result: yes
-configure:12594: checking if g++ static flag -static works
-configure:12622: result: yes
-configure:12632: checking if g++ supports -c -o file.o
-configure:12653: g++ -c -g -O2 -o out/conftest2.o conftest.cpp >&5
-configure:12657: $? = 0
-configure:12679: result: yes
-configure:12705: checking whether the g++ linker (/usr/bin/ld) supports shared libraries
-configure:12733: result: yes
-configure:12800: checking dynamic linker characteristics
-configure:13376: result: GNU/Linux ld.so
-configure:13385: checking how to hardcode library paths into programs
-configure:13410: result: immediate
-configure:19597: checking for bash
-configure:19627: result: /bin/sh
-configure:19646: checking for special C compiler options needed for large files
-configure:19773: result: no
-configure:19779: checking for _FILE_OFFSET_BITS value needed for large files
-configure:19815: gcc -c -g -O2 conftest.c >&5
-conftest.c:27: warning: left shift count >= width of type
-conftest.c:27: warning: left shift count >= width of type
-conftest.c:29: error: size of array 'off_t_is_large' is negative
-configure:19821: $? = 1
-configure: failed program was:
-| /* confdefs.h. */
-| #define PACKAGE_NAME "FULL-PACKAGE-NAME"
-| #define PACKAGE_TARNAME "full-package-name"
-| #define PACKAGE_VERSION "VERSION"
-| #define PACKAGE_STRING "FULL-PACKAGE-NAME VERSION"
-| #define PACKAGE_BUGREPORT "BUG-REPORT-ADDRESS"
-| #define PACKAGE "ltt-control"
-| #define VERSION "0.24-17092006"
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| /* end confdefs.h. */
-| #include <sys/types.h>
-| /* Check that off_t can represent 2**63 - 1 correctly.
-| We can't simply define LARGE_OFF_T to be 9223372036854775807,
-| since some C++ compilers masquerading as C compilers
-| incorrectly reject 9223372036854775807. */
-| #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-| int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-| && LARGE_OFF_T % 2147483647 == 1)
-| ? 1 : -1];
-| int
-| main ()
-| {
-|
-| ;
-| return 0;
-| }
-configure:19882: gcc -c -g -O2 conftest.c >&5
-configure:19888: $? = 0
-configure:19895: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:19898: $? = 0
-configure:19905: test -s conftest.o
-configure:19908: $? = 0
-configure:19922: result: 64
-configure:19932: checking for _LARGE_FILES value needed for large files
-configure:19968: gcc -c -g -O2 conftest.c >&5
-configure:19974: $? = 0
-configure:19981: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:19984: $? = 0
-configure:19991: test -s conftest.o
-configure:19994: $? = 0
-configure:20075: result: no
-configure:20137: checking for gcc
-configure:20164: result: gcc
-configure:20402: checking for C compiler version
-configure:20409: gcc --version >&5
-gcc (GCC) 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
-Copyright (C) 2006 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:20412: $? = 0
-configure:20419: gcc -v >&5
-Using built-in specs.
-Target: i486-linux-gnu
-Configured with: ../src/configure -v --enable-languages=c,c++,java,f95,objc,ada,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.0 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-java-awt=gtk-default --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-4.0-1.4.2.0/jre --enable-mpfr --disable-werror --with-tune=pentium4 --enable-checking=release i486-linux-gnu
-Thread model: posix
-gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
-configure:20422: $? = 0
-configure:20429: gcc -V >&5
-gcc: '-V' option must have argument
-configure:20432: $? = 1
-configure:20435: checking whether we are using the GNU C compiler
-configure:20504: result: yes
-configure:20509: checking whether gcc accepts -g
-configure:20695: result: yes
-configure:20712: checking for gcc option to accept ISO C89
-configure:20832: result: none needed
-configure:20852: checking dependency style of gcc
-configure:20935: result: gcc3
-configure:20953: checking for forkpty in -lutil
-configure:20988: gcc -o conftest -g -O2 conftest.c -lutil >&5
-configure:20994: $? = 0
-configure:21001: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:21004: $? = 0
-configure:21011: test -s conftest
-configure:21014: $? = 0
-configure:21028: result: yes
-configure:21043: checking for pthread_join in -lpthread
-configure:21078: gcc -o conftest -g -O2 conftest.c -lpthread >&5
-configure:21084: $? = 0
-configure:21091: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:21094: $? = 0
-configure:21101: test -s conftest
-configure:21104: $? = 0
-configure:21118: result: yes
-configure:21130: checking for ANSI C header files
-configure:21311: result: yes
-configure:21341: checking fcntl.h usability
-configure:21358: gcc -c -g -O2 conftest.c >&5
-configure:21364: $? = 0
-configure:21371: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:21374: $? = 0
-configure:21381: test -s conftest.o
-configure:21384: $? = 0
-configure:21395: result: yes
-configure:21399: checking fcntl.h presence
-configure:21414: gcc -E conftest.c
-configure:21420: $? = 0
-configure:21441: result: yes
-configure:21474: checking for fcntl.h
-configure:21482: result: yes
-configure:21331: checking for stdlib.h
-configure:21337: result: yes
-configure:21331: checking for string.h
-configure:21337: result: yes
-configure:21341: checking sys/time.h usability
-configure:21358: gcc -c -g -O2 conftest.c >&5
-configure:21364: $? = 0
-configure:21371: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:21374: $? = 0
-configure:21381: test -s conftest.o
-configure:21384: $? = 0
-configure:21395: result: yes
-configure:21399: checking sys/time.h presence
-configure:21414: gcc -E conftest.c
-configure:21420: $? = 0
-configure:21441: result: yes
-configure:21474: checking for sys/time.h
-configure:21482: result: yes
-configure:21331: checking for unistd.h
-configure:21337: result: yes
-configure:21341: checking pthread.h usability
-configure:21358: gcc -c -g -O2 conftest.c >&5
-configure:21364: $? = 0
-configure:21371: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:21374: $? = 0
-configure:21381: test -s conftest.o
-configure:21384: $? = 0
-configure:21395: result: yes
-configure:21399: checking pthread.h presence
-configure:21414: gcc -E conftest.c
-configure:21420: $? = 0
-configure:21441: result: yes
-configure:21474: checking for pthread.h
-configure:21482: result: yes
-configure:21497: checking for strerror in -lcposix
-configure:21532: gcc -o conftest -g -O2 conftest.c -lcposix >&5
-/usr/bin/ld: cannot find -lcposix
-collect2: ld returned 1 exit status
-configure:21538: $? = 1
-configure: failed program was:
-| /* confdefs.h. */
-| #define PACKAGE_NAME "FULL-PACKAGE-NAME"
-| #define PACKAGE_TARNAME "full-package-name"
-| #define PACKAGE_VERSION "VERSION"
-| #define PACKAGE_STRING "FULL-PACKAGE-NAME VERSION"
-| #define PACKAGE_BUGREPORT "BUG-REPORT-ADDRESS"
-| #define PACKAGE "ltt-control"
-| #define VERSION "0.24-17092006"
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_DLFCN_H 1
-| #define _FILE_OFFSET_BITS 64
-| #define STDC_HEADERS 1
-| #define HAVE_FCNTL_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_SYS_TIME_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_PTHREAD_H 1
-| /* end confdefs.h. */
-|
-| /* Override any GCC internal prototype to avoid an error.
-| Use char because int might match the return type of a GCC
-| builtin and then its argument prototype would still apply. */
-| #ifdef __cplusplus
-| extern "C"
-| #endif
-| char strerror ();
-| int
-| main ()
-| {
-| return strerror ();
-| ;
-| return 0;
-| }
-configure:21572: result: no
-configure:21628: checking for gcc
-configure:21655: result: gcc
-configure:21893: checking for C compiler version
-configure:21900: gcc --version >&5
-gcc (GCC) 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
-Copyright (C) 2006 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:21903: $? = 0
-configure:21910: gcc -v >&5
-Using built-in specs.
-Target: i486-linux-gnu
-Configured with: ../src/configure -v --enable-languages=c,c++,java,f95,objc,ada,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.0 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-java-awt=gtk-default --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-4.0-1.4.2.0/jre --enable-mpfr --disable-werror --with-tune=pentium4 --enable-checking=release i486-linux-gnu
-Thread model: posix
-gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)
-configure:21913: $? = 0
-configure:21920: gcc -V >&5
-gcc: '-V' option must have argument
-configure:21923: $? = 1
-configure:21926: checking whether we are using the GNU C compiler
-configure:21995: result: yes
-configure:22000: checking whether gcc accepts -g
-configure:22186: result: yes
-configure:22203: checking for gcc option to accept ISO C89
-configure:22323: result: none needed
-configure:22343: checking dependency style of gcc
-configure:22426: result: gcc3
-configure:22446: checking for gcc option to accept ANSI C
-configure:22514: gcc -c -g -O2 conftest.c >&5
-configure:22520: $? = 0
-configure:22527: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:22530: $? = 0
-configure:22537: test -s conftest.o
-configure:22540: $? = 0
-configure:22557: result: none needed
-configure:22568: checking for ANSI C header files
-configure:22749: result: yes
-configure:22765: checking for stdbool.h that conforms to C99
-configure:22858: gcc -c -g -O2 conftest.c >&5
-configure:22864: $? = 0
-configure:22871: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:22874: $? = 0
-configure:22881: test -s conftest.o
-configure:22884: $? = 0
-configure:22896: result: yes
-configure:22898: checking for _Bool
-configure:22928: gcc -c -g -O2 conftest.c >&5
-configure:22934: $? = 0
-configure:22941: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:22944: $? = 0
-configure:22951: test -s conftest.o
-configure:22954: $? = 0
-configure:22966: result: yes
-configure:22985: checking for an ANSI C-conforming const
-configure:23060: gcc -c -g -O2 conftest.c >&5
-configure:23066: $? = 0
-configure:23073: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23076: $? = 0
-configure:23083: test -s conftest.o
-configure:23086: $? = 0
-configure:23098: result: yes
-configure:23108: checking for inline
-configure:23134: gcc -c -g -O2 conftest.c >&5
-configure:23140: $? = 0
-configure:23147: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23150: $? = 0
-configure:23157: test -s conftest.o
-configure:23160: $? = 0
-configure:23175: result: inline
-configure:23194: checking for off_t
-configure:23224: gcc -c -g -O2 conftest.c >&5
-configure:23230: $? = 0
-configure:23237: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23240: $? = 0
-configure:23247: test -s conftest.o
-configure:23250: $? = 0
-configure:23262: result: yes
-configure:23274: checking for size_t
-configure:23304: gcc -c -g -O2 conftest.c >&5
-configure:23310: $? = 0
-configure:23317: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23320: $? = 0
-configure:23327: test -s conftest.o
-configure:23330: $? = 0
-configure:23342: result: yes
-configure:23354: checking whether time.h and sys/time.h may both be included
-configure:23384: gcc -c -g -O2 conftest.c >&5
-configure:23390: $? = 0
-configure:23397: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23400: $? = 0
-configure:23407: test -s conftest.o
-configure:23410: $? = 0
-configure:23422: result: yes
-configure:23434: checking for error_at_line
-configure:23460: gcc -o conftest -g -O2 conftest.c >&5
-configure:23466: $? = 0
-configure:23473: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23476: $? = 0
-configure:23483: test -s conftest
-configure:23486: $? = 0
-configure:23499: result: yes
-configure:23527: checking sys/select.h usability
-configure:23544: gcc -c -g -O2 conftest.c >&5
-configure:23550: $? = 0
-configure:23557: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23560: $? = 0
-configure:23567: test -s conftest.o
-configure:23570: $? = 0
-configure:23581: result: yes
-configure:23585: checking sys/select.h presence
-configure:23600: gcc -E conftest.c
-configure:23606: $? = 0
-configure:23627: result: yes
-configure:23660: checking for sys/select.h
-configure:23668: result: yes
-configure:23527: checking sys/socket.h usability
-configure:23544: gcc -c -g -O2 conftest.c >&5
-configure:23550: $? = 0
-configure:23557: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23560: $? = 0
-configure:23567: test -s conftest.o
-configure:23570: $? = 0
-configure:23581: result: yes
-configure:23585: checking sys/socket.h presence
-configure:23600: gcc -E conftest.c
-configure:23606: $? = 0
-configure:23627: result: yes
-configure:23660: checking for sys/socket.h
-configure:23668: result: yes
-configure:23681: checking types of arguments for select
-configure:23719: gcc -c -g -O2 conftest.c >&5
-configure:23725: $? = 0
-configure:23732: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23735: $? = 0
-configure:23742: test -s conftest.o
-configure:23745: $? = 0
-configure:23763: result: int,fd_set *,struct timeval *
-configure:23790: checking for select
-configure:23846: gcc -o conftest -g -O2 conftest.c >&5
-configure:23852: $? = 0
-configure:23859: test -z "$ac_c_werror_flag" || test ! -s conftest.err
-configure:23862: $? = 0
-configure:23869: test -s conftest
-configure:23872: $? = 0
-configure:23886: result: yes
-configure:24048: creating ./config.status
-
-## ---------------------- ##
-## Running config.status. ##
-## ---------------------- ##
-
-This file was extended by FULL-PACKAGE-NAME config.status VERSION, which was
-generated by GNU Autoconf 2.60. Invocation command line was
-
- CONFIG_FILES =
- CONFIG_HEADERS =
- CONFIG_LINKS =
- CONFIG_COMMANDS =
- $ ./config.status
-
-on ubuntujov
-
-config.status:654: creating Makefile
-config.status:654: creating liblttctl/Makefile
-config.status:654: creating lttctl/Makefile
-config.status:654: creating lttd/Makefile
-config.status:654: creating facilities/Makefile
-config.status:654: creating config.h
-config.status:893: config.h is unchanged
-config.status:939: executing depfiles commands
-
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-
-ac_cv_build=i686-pc-linux-gnu
-ac_cv_c_compiler_gnu=yes
-ac_cv_c_const=yes
-ac_cv_c_inline=inline
-ac_cv_cxx_compiler_gnu=yes
-ac_cv_env_CCC_set=
-ac_cv_env_CCC_value=
-ac_cv_env_CC_set=
-ac_cv_env_CC_value=
-ac_cv_env_CFLAGS_set=
-ac_cv_env_CFLAGS_value=
-ac_cv_env_CPPFLAGS_set=
-ac_cv_env_CPPFLAGS_value=
-ac_cv_env_CPP_set=
-ac_cv_env_CPP_value=
-ac_cv_env_CXXCPP_set=
-ac_cv_env_CXXCPP_value=
-ac_cv_env_CXXFLAGS_set=
-ac_cv_env_CXXFLAGS_value=
-ac_cv_env_CXX_set=
-ac_cv_env_CXX_value=
-ac_cv_env_F77_set=
-ac_cv_env_F77_value=
-ac_cv_env_FFLAGS_set=
-ac_cv_env_FFLAGS_value=
-ac_cv_env_LDFLAGS_set=
-ac_cv_env_LDFLAGS_value=
-ac_cv_env_build_alias_set=
-ac_cv_env_build_alias_value=
-ac_cv_env_host_alias_set=
-ac_cv_env_host_alias_value=
-ac_cv_env_target_alias_set=
-ac_cv_env_target_alias_value=
-ac_cv_f77_compiler_gnu=no
-ac_cv_func_select=yes
-ac_cv_func_select_args='int,fd_set *,struct timeval *'
-ac_cv_header_dlfcn_h=yes
-ac_cv_header_fcntl_h=yes
-ac_cv_header_inttypes_h=yes
-ac_cv_header_memory_h=yes
-ac_cv_header_pthread_h=yes
-ac_cv_header_stdbool_h=yes
-ac_cv_header_stdc=yes
-ac_cv_header_stdint_h=yes
-ac_cv_header_stdlib_h=yes
-ac_cv_header_string_h=yes
-ac_cv_header_strings_h=yes
-ac_cv_header_sys_select_h=yes
-ac_cv_header_sys_socket_h=yes
-ac_cv_header_sys_stat_h=yes
-ac_cv_header_sys_time_h=yes
-ac_cv_header_sys_types_h=yes
-ac_cv_header_time=yes
-ac_cv_header_unistd_h=yes
-ac_cv_host=i686-pc-linux-gnu
-ac_cv_lib_cposix_strerror=no
-ac_cv_lib_error_at_line=yes
-ac_cv_lib_pthread_pthread_join=yes
-ac_cv_lib_util_forkpty=yes
-ac_cv_objext=o
-ac_cv_path_BASH=/bin/sh
-ac_cv_path_EGREP='/bin/grep -E'
-ac_cv_path_GREP=/bin/grep
-ac_cv_path_install='/usr/bin/install -c'
-ac_cv_prog_AWK=mawk
-ac_cv_prog_CPP='gcc -E'
-ac_cv_prog_CXXCPP='g++ -E'
-ac_cv_prog_ac_ct_AR=ar
-ac_cv_prog_ac_ct_CC=gcc
-ac_cv_prog_ac_ct_CXX=g++
-ac_cv_prog_ac_ct_RANLIB=ranlib
-ac_cv_prog_ac_ct_STRIP=strip
-ac_cv_prog_cc_c89=
-ac_cv_prog_cc_g=yes
-ac_cv_prog_cxx_g=yes
-ac_cv_prog_f77_g=no
-ac_cv_prog_make_make_set=yes
-ac_cv_sys_file_offset_bits=64
-ac_cv_sys_large_files=no
-ac_cv_sys_largefile_CC=no
-ac_cv_type__Bool=yes
-ac_cv_type_off_t=yes
-ac_cv_type_size_t=yes
-am_cv_CC_dependencies_compiler_type=gcc3
-am_cv_CXX_dependencies_compiler_type=gcc3
-am_cv_prog_cc_stdc=
-lt_cv_deplibs_check_method=pass_all
-lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_ld_reload_flag=-r
-lt_cv_objdir=.libs
-lt_cv_path_LD=/usr/bin/ld
-lt_cv_path_LDCXX=/usr/bin/ld
-lt_cv_path_NM='/usr/bin/nm -B'
-lt_cv_path_SED=/bin/sed
-lt_cv_prog_compiler_c_o=yes
-lt_cv_prog_compiler_c_o_CXX=yes
-lt_cv_prog_compiler_rtti_exceptions=no
-lt_cv_prog_gnu_ld=yes
-lt_cv_prog_gnu_ldcxx=yes
-lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
-lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'''
-lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\'''
-lt_cv_sys_max_cmd_len=32768
-lt_lt_cv_prog_compiler_c_o='"yes"'
-lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
-lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'\''"'
-lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
-lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"'
-
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-
-ACLOCAL='${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run aclocal-1.7'
-AMDEPBACKSLASH='\'
-AMDEP_FALSE='#'
-AMDEP_TRUE=''
-AMTAR='${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run tar'
-AR='ar'
-AUTOCONF='${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoconf'
-AUTOHEADER='${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoheader'
-AUTOMAKE='${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run automake-1.7'
-AWK='mawk'
-BASH='/bin/sh'
-CC='gcc'
-CCDEPMODE='depmode=gcc3'
-CFLAGS='-g -O2'
-CPP='gcc -E'
-CPPFLAGS=''
-CXX='g++'
-CXXCPP='g++ -E'
-CXXDEPMODE='depmode=gcc3'
-CXXFLAGS='-g -O2'
-CYGPATH_W='echo'
-DEFAULT_INCLUDES='-I$(top_srcdir) -I$(top_builddir)'
-DEFS='-DHAVE_CONFIG_H'
-DEPDIR='.deps'
-ECHO='echo'
-ECHO_C=''
-ECHO_N='-n'
-ECHO_T=''
-EGREP='/bin/grep -E'
-EXEEXT=''
-F77=''
-FFLAGS=''
-GREP='/bin/grep'
-INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL}'
-INSTALL_SCRIPT='${INSTALL}'
-INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
-LDFLAGS=''
-LIBOBJS=''
-LIBS=''
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-LN_S='ln -s'
-LTLIBOBJS=''
-MAKEINFO='${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run makeinfo'
-OBJEXT='o'
-PACKAGE='ltt-control'
-PACKAGE_BUGREPORT='BUG-REPORT-ADDRESS'
-PACKAGE_CFLAGS='-Wall -Wformat'
-PACKAGE_LIBS=''
-PACKAGE_NAME='FULL-PACKAGE-NAME'
-PACKAGE_STRING='FULL-PACKAGE-NAME VERSION'
-PACKAGE_TARNAME='full-package-name'
-PACKAGE_VERSION='VERSION'
-PATH_SEPARATOR=':'
-RANLIB='ranlib'
-SET_MAKE=''
-SHELL='/bin/sh'
-STRIP='strip'
-THREAD_LIBS='-lpthread'
-UTIL_LIBS='-lutil'
-VERSION='0.24-17092006'
-ac_ct_CC='gcc'
-ac_ct_CXX='g++'
-ac_ct_F77=''
-am__fastdepCC_FALSE='#'
-am__fastdepCC_TRUE=''
-am__fastdepCXX_FALSE='#'
-am__fastdepCXX_TRUE=''
-am__include='include'
-am__leading_dot='.'
-am__quote=''
-bindir='${exec_prefix}/bin'
-build='i686-pc-linux-gnu'
-build_alias=''
-build_cpu='i686'
-build_os='linux-gnu'
-build_vendor='pc'
-datadir='${datarootdir}'
-datarootdir='${prefix}/share'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-dvidir='${docdir}'
-exec_prefix='${prefix}'
-host='i686-pc-linux-gnu'
-host_alias=''
-host_cpu='i686'
-host_os='linux-gnu'
-host_vendor='pc'
-htmldir='${docdir}'
-includedir='${prefix}/include'
-infodir='${datarootdir}/info'
-install_sh='/usr/src/ltt-control-0.24-17092006/install-sh'
-libdir='${exec_prefix}/lib'
-libexecdir='${exec_prefix}/libexec'
-localedir='${datarootdir}/locale'
-localstatedir='${prefix}/var'
-lttctlincludedir='${prefix}/include/liblttctl'
-mandir='${datarootdir}/man'
-oldincludedir='/usr/include'
-pdfdir='${docdir}'
-prefix='/usr/local'
-program_transform_name='s,x,x,'
-psdir='${docdir}'
-sbindir='${exec_prefix}/sbin'
-sharedstatedir='${prefix}/com'
-sysconfdir='${prefix}/etc'
-target_alias=''
-
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-
-#define PACKAGE_NAME "FULL-PACKAGE-NAME"
-#define PACKAGE_TARNAME "full-package-name"
-#define PACKAGE_VERSION "VERSION"
-#define PACKAGE_STRING "FULL-PACKAGE-NAME VERSION"
-#define PACKAGE_BUGREPORT "BUG-REPORT-ADDRESS"
-#define PACKAGE "ltt-control"
-#define VERSION "0.24-17092006"
-#define STDC_HEADERS 1
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_SYS_STAT_H 1
-#define HAVE_STDLIB_H 1
-#define HAVE_STRING_H 1
-#define HAVE_MEMORY_H 1
-#define HAVE_STRINGS_H 1
-#define HAVE_INTTYPES_H 1
-#define HAVE_STDINT_H 1
-#define HAVE_UNISTD_H 1
-#define HAVE_DLFCN_H 1
-#define _FILE_OFFSET_BITS 64
-#define STDC_HEADERS 1
-#define HAVE_FCNTL_H 1
-#define HAVE_STDLIB_H 1
-#define HAVE_STRING_H 1
-#define HAVE_SYS_TIME_H 1
-#define HAVE_UNISTD_H 1
-#define HAVE_PTHREAD_H 1
-#define STDC_HEADERS 1
-#define HAVE__BOOL 1
-#define HAVE_STDBOOL_H 1
-#define TIME_WITH_SYS_TIME 1
-#define HAVE_SYS_SELECT_H 1
-#define HAVE_SYS_SOCKET_H 1
-#define SELECT_TYPE_ARG1 int
-#define SELECT_TYPE_ARG234 (fd_set *)
-#define SELECT_TYPE_ARG5 (struct timeval *)
-#define HAVE_SELECT 1
-
-configure: exit 0
+++ /dev/null
-#! /bin/sh
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=${CONFIG_SHELL-/bin/sh}
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-# Find out whether ``test -x'' works. Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- as_executable_p="test -x"
-else
- as_executable_p=:
-fi
-rm -f conf$$.file
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by FULL-PACKAGE-NAME $as_me VERSION, which was
-generated by GNU Autoconf 2.60. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-# Files that config.status was made for.
-config_files=" Makefile liblttctl/Makefile lttctl/Makefile lttd/Makefile facilities/Makefile"
-config_headers=" config.h"
-config_commands=" depfiles"
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-
-ac_cs_version="\
-FULL-PACKAGE-NAME config.status VERSION
-configured by ./configure, generated by GNU Autoconf 2.60,
- with options \"\"
-
-Copyright (C) 2006 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='/usr/src/ltt-control-0.24-17092006'
-srcdir='.'
-INSTALL='/usr/bin/install -c'
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- { echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
- echo "running CONFIG_SHELL=/bin/sh /bin/sh ./configure " $ac_configure_extra_args " --no-create --no-recursion" >&6
- CONFIG_SHELL=/bin/sh
- export CONFIG_SHELL
- exec /bin/sh "./configure" $ac_configure_extra_args --no-create --no-recursion
-fi
-
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- echo "$ac_log"
-} >&5
-
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="" ac_aux_dir="."
-
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "liblttctl/Makefile") CONFIG_FILES="$CONFIG_FILES liblttctl/Makefile" ;;
- "lttctl/Makefile") CONFIG_FILES="$CONFIG_FILES lttctl/Makefile" ;;
- "lttd/Makefile") CONFIG_FILES="$CONFIG_FILES lttd/Makefile" ;;
- "facilities/Makefile") CONFIG_FILES="$CONFIG_FILES facilities/Makefile" ;;
-
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp=
- trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-
-cat >"$tmp/subs-1.sed" <<\CEOF
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@SHELL@,|#_!!_#|/bin/sh,g
-s,@PATH_SEPARATOR@,|#_!!_#|:,g
-s,@PACKAGE_NAME@,|#_!!_#|FULL-PACKAGE-NAME,g
-s,@PACKAGE_TARNAME@,|#_!!_#|full-package-name,g
-s,@PACKAGE_VERSION@,|#_!!_#|VERSION,g
-s,@PACKAGE_STRING@,|#_!!_#|FULL-PACKAGE-NAME VERSION,g
-s,@PACKAGE_BUGREPORT@,|#_!!_#|BUG-REPORT-ADDRESS,g
-s,@exec_prefix@,|#_!!_#|${prefix},g
-s,@prefix@,|#_!!_#|/usr/local,g
-s,@program_transform_name@,|#_!!_#|s\,x\,x\,,g
-s,@bindir@,|#_!!_#|${exec_prefix}/bin,g
-s,@sbindir@,|#_!!_#|${exec_prefix}/sbin,g
-s,@libexecdir@,|#_!!_#|${exec_prefix}/libexec,g
-s,@datarootdir@,|#_!!_#|${prefix}/share,g
-s,@datadir@,|#_!!_#|${datarootdir},g
-s,@sysconfdir@,|#_!!_#|${prefix}/etc,g
-s,@sharedstatedir@,|#_!!_#|${prefix}/com,g
-s,@localstatedir@,|#_!!_#|${prefix}/var,g
-s,@includedir@,|#_!!_#|${prefix}/include,g
-s,@oldincludedir@,|#_!!_#|/usr/include,g
-s,@docdir@,|#_!!_#|${datarootdir}/doc/${PACKAGE_TARNAME},g
-s,@infodir@,|#_!!_#|${datarootdir}/info,g
-s,@htmldir@,|#_!!_#|${docdir},g
-s,@dvidir@,|#_!!_#|${docdir},g
-s,@pdfdir@,|#_!!_#|${docdir},g
-s,@psdir@,|#_!!_#|${docdir},g
-s,@libdir@,|#_!!_#|${exec_prefix}/lib,g
-s,@localedir@,|#_!!_#|${datarootdir}/locale,g
-s,@mandir@,|#_!!_#|${datarootdir}/man,g
-s,@DEFS@,|#_!!_#|-DHAVE_CONFIG_H,g
-s,@ECHO_C@,|#_!!_#|,g
-s,@ECHO_N@,|#_!!_#|-n,g
-s,@ECHO_T@,|#_!!_#|,g
-s,@LIBS@,|#_!!_#|,g
-s,@build_alias@,|#_!!_#|,g
-s,@host_alias@,|#_!!_#|,g
-s,@target_alias@,|#_!!_#|,g
-s,@INSTALL_PROGRAM@,|#_!!_#|${INSTALL},g
-s,@INSTALL_SCRIPT@,|#_!!_#|${INSTALL},g
-s,@INSTALL_DATA@,|#_!!_#|${INSTALL} -m 644,g
-s,@CYGPATH_W@,|#_!!_#|echo,g
-s,@PACKAGE@,|#_!!_#|ltt-control,g
-s,@VERSION@,|#_!!_#|0.24-17092006,g
-s,@ACLOCAL@,|#_!!_#|${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run aclocal-1.7,g
-s,@AUTOCONF@,|#_!!_#|${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoconf,g
-s,@AUTOMAKE@,|#_!!_#|${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run automake-1.7,g
-s,@AUTOHEADER@,|#_!!_#|${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoheader,g
-s,@MAKEINFO@,|#_!!_#|${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run makeinfo,g
-s,@AMTAR@,|#_!!_#|${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run tar,g
-s,@install_sh@,|#_!!_#|/usr/src/ltt-control-0.24-17092006/install-sh,g
-s,@STRIP@,|#_!!_#|strip,g
-s,@INSTALL_STRIP_PROGRAM@,|#_!!_#|${SHELL} $(install_sh) -c -s,g
-s,@AWK@,|#_!!_#|mawk,g
-s,@SET_MAKE@,|#_!!_#|,g
-s,@am__leading_dot@,|#_!!_#|.,g
-s,@build@,|#_!!_#|i686-pc-linux-gnu,g
-s,@build_cpu@,|#_!!_#|i686,g
-s,@build_vendor@,|#_!!_#|pc,g
-s,@build_os@,|#_!!_#|linux-gnu,g
-s,@host@,|#_!!_#|i686-pc-linux-gnu,g
-s,@host_cpu@,|#_!!_#|i686,g
-s,@host_vendor@,|#_!!_#|pc,g
-s,@host_os@,|#_!!_#|linux-gnu,g
-s,@CC@,|#_!!_#|gcc,g
-s,@CFLAGS@,|#_!!_#|-g -O2,g
-s,@LDFLAGS@,|#_!!_#|,g
-s,@CPPFLAGS@,|#_!!_#|,g
-s,@ac_ct_CC@,|#_!!_#|gcc,g
-s,@EXEEXT@,|#_!!_#|,g
-s,@OBJEXT@,|#_!!_#|o,g
-s,@DEPDIR@,|#_!!_#|.deps,g
-s,@am__include@,|#_!!_#|include,g
-s,@am__quote@,|#_!!_#|,g
-s,@AMDEP_TRUE@,|#_!!_#|,g
-s,@AMDEP_FALSE@,|#_!!_#|#,g
-s,@AMDEPBACKSLASH@,|#_!!_#|\\,g
-s,@CCDEPMODE@,|#_!!_#|depmode=gcc3,g
-s,@am__fastdepCC_TRUE@,|#_!!_#|,g
-s,@am__fastdepCC_FALSE@,|#_!!_#|#,g
-s,@GREP@,|#_!!_#|/bin/grep,g
-s,@EGREP@,|#_!!_#|/bin/grep -E,g
-s,@LN_S@,|#_!!_#|ln -s,g
-s,@ECHO@,|#_!!_#|echo,g
-s,@AR@,|#_!!_#|ar,g
-s,@RANLIB@,|#_!!_#|ranlib,g
-s,@CPP@,|#_!!_#|gcc -E,g
-s,@CXX@,|#_!!_#|g++,g
-s,@CXXFLAGS@,|#_!!_#|-g -O2,g
-s,@ac_ct_CXX@,|#_!!_#|g++,g
-s,@CXXDEPMODE@,|#_!!_#|depmode=gcc3,g
-s,@am__fastdepCXX_TRUE@,|#_!!_#|,g
-s,@am__fastdepCXX_FALSE@,|#_!!_#|#,g
-s,@CXXCPP@,|#_!!_#|g++ -E,g
-s,@F77@,|#_!!_#|,g
-s,@FFLAGS@,|#_!!_#|,g
-s,@ac_ct_F77@,|#_!!_#|,g
-s,@LIBTOOL@,|#_!!_#|$(SHELL) $(top_builddir)/libtool,g
-CEOF
-cat >"$tmp/subs-2.sed" <<\CEOF
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-s,@BASH@,|#_!!_#|/bin/sh,g
-s,@PACKAGE_CFLAGS@,|#_!!_#|-Wall -Wformat,g
-s,@PACKAGE_LIBS@,|#_!!_#|,g
-s,@LIBOBJS@,|#_!!_#|,g
-s,@lttctlincludedir@,|#_!!_#|${prefix}/include/liblttctl,g
-s,@UTIL_LIBS@,|#_!!_#|-lutil,g
-s,@THREAD_LIBS@,|#_!!_#|-lpthread,g
-s,@DEFAULT_INCLUDES@,|#_!!_#|-I$(top_srcdir) -I$(top_builddir),g
-s,@LTLIBOBJS@,|#_!!_#|,g
-:end
-s/|#_!!_#|//g
-CEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- ac_file_inputs="$ac_file_inputs $ac_f"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input="Generated from "`IFS=:
- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- fi
-
- case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin";;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-
-case `sed -n '/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
- ac_datarootdir_hack='
- s&@datadir@&${datarootdir}&g
- s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g
- s&@infodir@&${datarootdir}/info&g
- s&@localedir@&${datarootdir}/locale&g
- s&@mandir@&${datarootdir}/man&g
- s&\${datarootdir}&${prefix}/share&g' ;;
-esac
- sed "/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[ ]*$//
-}
-
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
-
- rm -f "$tmp/stdin"
- case $ac_file in
- -) cat "$tmp/out"; rm -f "$tmp/out";;
- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
- esac
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
- # First, check the format of the line:
- cat >"$tmp/defines.sed" <<\CEOF
-/^[ ]*#[ ]*undef[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[ ]*$/b def
-/^[ ]*#[ ]*define[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[( ]/b def
-b
-:def
-s/$/ /
-s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_NAME\)[ (].*,\1define\2 "FULL-PACKAGE-NAME" ,
-s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_TARNAME\)[ (].*,\1define\2 "full-package-name" ,
-s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_VERSION\)[ (].*,\1define\2 "VERSION" ,
-s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_STRING\)[ (].*,\1define\2 "FULL-PACKAGE-NAME VERSION" ,
-s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_BUGREPORT\)[ (].*,\1define\2 "BUG-REPORT-ADDRESS" ,
-s,^\([ #]*\)[^ ]*\([ ]*PACKAGE\)[ (].*,\1define\2 "ltt-control" ,
-s,^\([ #]*\)[^ ]*\([ ]*VERSION\)[ (].*,\1define\2 "0.24-17092006" ,
-s,^\([ #]*\)[^ ]*\([ ]*STDC_HEADERS\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_TYPES_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_STAT_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDLIB_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRING_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_MEMORY_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRINGS_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_INTTYPES_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDINT_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_UNISTD_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_DLFCN_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*_FILE_OFFSET_BITS\)[ (].*,\1define\2 64 ,
-s,^\([ #]*\)[^ ]*\([ ]*STDC_HEADERS\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_FCNTL_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDLIB_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRING_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_TIME_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_UNISTD_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_PTHREAD_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*STDC_HEADERS\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE__BOOL\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDBOOL_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*TIME_WITH_SYS_TIME\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_SELECT_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_SOCKET_H\)[ (].*,\1define\2 1 ,
-s,^\([ #]*\)[^ ]*\([ ]*SELECT_TYPE_ARG1\)[ (].*,\1define\2 int ,
-s,^\([ #]*\)[^ ]*\([ ]*SELECT_TYPE_ARG234\)[ (].*,\1define\2 (fd_set *) ,
-s,^\([ #]*\)[^ ]*\([ ]*SELECT_TYPE_ARG5\)[ (].*,\1define\2 (struct timeval *) ,
-s,^\([ #]*\)[^ ]*\([ ]*HAVE_SELECT\)[ (].*,\1define\2 1 ,
-s/ $//
-s,^[ #]*u.*,/* & */,
-CEOF
- sed -f "$tmp/defines.sed" $ac_file_inputs >"$tmp/out1"
-ac_result="$tmp/out1"
- if test x"$ac_file" != x-; then
- echo "/* $configure_input */" >"$tmp/config.h"
- cat "$ac_result" >>"$tmp/config.h"
- if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f $ac_file
- mv "$tmp/config.h" $ac_file
- fi
- else
- echo "/* $configure_input */"
- cat "$ac_result"
- fi
- rm -f "$tmp/out12"
-# Compute $ac_file's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $ac_file | $ac_file:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X$ac_file : 'X\(//\)[^/]' \| \
- X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
-echo X$ac_file |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
- :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
- test -z "$DEPDIR" && continue
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n -e '/^U = / s///p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n -e '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir=$dirpart/$fdir
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
-
- esac
-done # for ac_tag
-
-
-{ (exit 0); exit 0; }
+++ /dev/null
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-timestamp='2006-02-23'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit ;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
- uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
- storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco6)
- os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5v6*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
- | bfin \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64vr | mips64vrel \
- | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mips64vr5900 | mips64vr5900el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | mt \
- | msp430 \
- | nios | nios2 \
- | ns16k | ns32k \
- | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
- | sparcv8 | sparcv9 | sparcv9b \
- | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
- | we32k \
- | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m32c)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
- ms1)
- basic_machine=mt-unknown
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
- | bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mips64vr5900-* | mips64vr5900el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | mt-* \
- | msp430-* \
- | nios-* | nios2-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
- | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
- | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
- | xstormy16-* | xtensa-* \
- | ymp-* \
- | z8k-*)
- ;;
- m32c-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16c)
- basic_machine=cr16c-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- openrisc | openrisc-*)
- basic_machine=or32-unknown
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pc98)
- basic_machine=i386-pc
- ;;
- pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rdos)
- basic_machine=i386-pc
- os=-rdos
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-haiku)
- os=-haiku
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.60 for FULL-PACKAGE-NAME VERSION.
-#
-# Report bugs to <BUG-REPORT-ADDRESS>.
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
-else
- as_have_required=no
-fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- case $as_dir in
- /*)
- for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
- done;;
- esac
-done
-IFS=$as_save_IFS
-
-
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell autoconf@gnu.org about your system,
- echo including any error possibly output before this
- echo message
-}
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-# Find out whether ``test -x'' works. Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- as_executable_p="test -x"
-else
- as_executable_p=:
-fi
-rm -f conf$$.file
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
-
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
-exec 7<&0 </dev/null 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Identity of this package.
-PACKAGE_NAME='FULL-PACKAGE-NAME'
-PACKAGE_TARNAME='full-package-name'
-PACKAGE_VERSION='VERSION'
-PACKAGE_STRING='FULL-PACKAGE-NAME VERSION'
-PACKAGE_BUGREPORT='BUG-REPORT-ADDRESS'
-
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#if HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-AMTAR
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-AWK
-SET_MAKE
-am__leading_dot
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-GREP
-EGREP
-LN_S
-ECHO
-AR
-RANLIB
-CPP
-CXX
-CXXFLAGS
-ac_ct_CXX
-CXXDEPMODE
-am__fastdepCXX_TRUE
-am__fastdepCXX_FALSE
-CXXCPP
-F77
-FFLAGS
-ac_ct_F77
-LIBTOOL
-BASH
-PACKAGE_CFLAGS
-PACKAGE_LIBS
-LIBOBJS
-lttctlincludedir
-UTIL_LIBS
-THREAD_LIBS
-DEFAULT_INCLUDES
-LTLIBOBJS'
-ac_subst_files=''
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-CPP
-CXX
-CXXFLAGS
-CCC
-CXXCPP
-F77
-FFLAGS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval enable_$ac_feature=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval enable_$ac_feature=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval with_$ac_package=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval with_$ac_package=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute directory names.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { echo "$as_me: error: Working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures FULL-PACKAGE-NAME VERSION to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/full-package-name]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of FULL-PACKAGE-NAME VERSION:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-shared[=PKGS] build shared libraries [default=yes]
- --enable-static[=PKGS] build static libraries [default=yes]
- --enable-fast-install[=PKGS]
- optimize for fast installation [default=yes]
- --disable-dependency-tracking Speeds up one-time builds
- --enable-dependency-tracking Do not reject slow dependency extractors
- --disable-libtool-lock avoid locking (might break parallel builds)
- --disable-largefile omit support for large files
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-pic try to use only PIC/non-PIC objects [default=use
- both]
- --with-tags[=TAGS] include additional configurations [automatic]
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
- CXX C++ compiler command
- CXXFLAGS C++ compiler flags
- CXXCPP C++ preprocessor
- F77 Fortran 77 compiler command
- FFLAGS Fortran 77 compiler flags
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <BUG-REPORT-ADDRESS>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" || continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-FULL-PACKAGE-NAME configure VERSION
-generated by GNU Autoconf 2.60
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by FULL-PACKAGE-NAME $as_me VERSION, which was
-generated by GNU Autoconf 2.60. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
- set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
- set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
- set x "$ac_default_prefix/share/config.site" \
- "$ac_default_prefix/etc/config.site"
-fi
-shift
-for ac_site_file
-do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-#AC_WITH_LTDL # not needed ?
-am__api_version="1.7"
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-IFS=$as_save_IFS
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $. echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
-
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- SET_MAKE=
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
- # test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE=ltt-control
- VERSION=0.24-17092006
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval=$enable_shared; p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_shared=yes
-fi
-
-
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
- enableval=$enable_static; p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_static=yes
-fi
-
-
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
- enableval=$enable_fast_install; p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_fast_install=yes
-fi
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
-
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-if test "${ac_cv_build+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-if test "${ac_cv_host+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
- { (exit 1); exit 1; }; };;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-{ echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort. b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions. Remove them first so a
-# subsequent execution test works.
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
-
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_c89=$ac_arg
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
- xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- : > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # (even with -Werror). So we grep stderr for any message
- # that says an option was ignored.
- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-
-fi
-
-SED=$lt_cv_path_SED
-{ echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6; }
-
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue
- # Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_GREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_GREP=$GREP
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue
- # Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_EGREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
-
- fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-else
- { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
-
-{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
- { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6; }
-fi
-
-{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[45]*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump'.
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix3*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 4311 "configure"' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- lt_cv_cc_needs_belf=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- lt_cv_cc_needs_belf=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-
-esac
-
-need_locks="$enable_libtool_lock"
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-for ac_header in dlfcn.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## --------------------------------- ##
-## Report this to BUG-REPORT-ADDRESS ##
-## --------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
- if test -n "$CCC"; then
- CXX=$CCC
- else
- if test -n "$ac_tool_prefix"; then
- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CXX"; then
- ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
- { echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CXX" && break
- done
-fi
-if test -z "$CXX"; then
- ac_ct_CXX=$CXX
- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CXX"; then
- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CXX="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CXX" && break
-done
-
- if test "x$ac_ct_CXX" = x; then
- CXX="g++"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CXX=$ac_ct_CXX
- fi
-fi
-
- fi
-fi
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
-GXX=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_cxx_werror_flag=$ac_cxx_werror_flag
- ac_cxx_werror_flag=yes
- ac_cv_prog_cxx_g=no
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cxx_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CXXFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cxx_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
- if test "$GXX" = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-g"
- fi
-else
- if test "$GXX" = yes; then
- CXXFLAGS="-O2"
- else
- CXXFLAGS=
- fi
-fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-depcc="$CXX" am_compiler_list=
-
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CXX_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- : > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # (even with -Werror). So we grep stderr for any message
- # that says an option was ignored.
- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
- am_cv_CXX_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CXX_dependencies_compiler_type=none
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
- am__fastdepCXX_TRUE=
- am__fastdepCXX_FALSE='#'
-else
- am__fastdepCXX_TRUE='#'
- am__fastdepCXX_FALSE=
-fi
-
-
-
-
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
-if test -z "$CXXCPP"; then
- if test "${ac_cv_prog_CXXCPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CXXCPP needs to be expanded
- for CXXCPP in "$CXX -E" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CXXCPP=$CXXCPP
-
-fi
- CXXCPP=$ac_cv_prog_CXXCPP
-else
- ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
-echo "${ECHO_T}$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_cxx_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-fi
-
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$F77"; then
- ac_cv_prog_F77="$F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
- { echo "$as_me:$LINENO: result: $F77" >&5
-echo "${ECHO_T}$F77" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$F77" && break
- done
-fi
-if test -z "$F77"; then
- ac_ct_F77=$F77
- for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_F77"; then
- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_F77="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
- { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-echo "${ECHO_T}$ac_ct_F77" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_F77" && break
-done
-
- if test "x$ac_ct_F77" = x; then
- F77=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- F77=$ac_ct_F77
- fi
-fi
-
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-rm -f a.out
-
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file. (Note that this only needs to work for GNU compilers.)
-ac_save_ext=$ac_ext
-ac_ext=F
-{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
- program main
-#ifndef __GNUC__
- choke me
-#endif
-
- end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
-ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- FFLAGS=-g
-cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_f77_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_prog_f77_g=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
-if test "$ac_test_FFLAGS" = set; then
- FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
- if test "x$ac_cv_f77_compiler_gnu" = xyes; then
- FFLAGS="-g -O2"
- else
- FFLAGS="-g"
- fi
-else
- if test "x$ac_cv_f77_compiler_gnu" = xyes; then
- FFLAGS="-O2"
- else
- FFLAGS=
- fi
-fi
-
-G77=`test $ac_compiler_gnu = yes && echo yes`
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# find the maximum length of command line arguments
-{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- ;;
- esac
-
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
- { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
-else
- { echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6; }
-fi
-
-
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[ABCDEGRST]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux* | k*bsd*-gnu)
- if test "$host_cpu" = ia64; then
- symcode='[ABCDGIRSTW]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-osf*)
- symcode='[BCDEGQRST]'
- ;;
-solaris*)
- symcode='[BDRT]'
- ;;
-sco3.2v5*)
- symcode='[DT]'
- ;;
-sysv4.2uw2*)
- symcode='[DT]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[ABDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- { echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6; }
-else
- { echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6; }
-fi
-
-{ echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
-if test "${lt_cv_objdir+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- { echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- else
- MAGIC_CMD=:
- fi
-fi
-
- fi
- ;;
-esac
-
-enable_dlopen=no
-enable_win32_dll=no
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
- withval=$with_pic; pic_mode="$withval"
-else
- pic_mode=default
-fi
-
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-
-lt_prog_compiler_no_builtin_flag=
-
-if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag=' -fno-builtin'
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7268: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:7272: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-else
- :
-fi
-
-fi
-
-lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_static='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic='-fno-common'
- ;;
-
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- else
- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic='-qnocommon'
- lt_prog_compiler_wl='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fpic'
- lt_prog_compiler_static='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl='-Qoption ld '
- lt_prog_compiler_pic='-PIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic='-Kconform_pic'
- lt_prog_compiler_static='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_can_build_shared=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic='-pic'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7536: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:7540: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_prog_compiler_pic_works" = xyes; then
- case $lt_prog_compiler_pic in
- "" | " "*) ;;
- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
- esac
-else
- lt_prog_compiler_pic=
- lt_prog_compiler_can_build_shared=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic=
- ;;
- *)
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works=yes
- fi
- else
- lt_prog_compiler_static_works=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
-
-if test x"$lt_prog_compiler_static_works" = xyes; then
- :
-else
- lt_prog_compiler_static=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7640: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:7644: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- runpath_var=
- allow_undefined_flag=
- enable_shared_with_static_runtimes=no
- archive_cmds=
- archive_expsym_cmds=
- old_archive_From_new_cmds=
- old_archive_from_expsyms_cmds=
- export_dynamic_flag_spec=
- whole_archive_flag_spec=
- thread_safe_flag_spec=
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld=
- hardcode_libdir_separator=
- hardcode_direct=no
- hardcode_minus_L=no
- hardcode_shlibpath_var=unsupported
- link_all_deplibs=unknown
- hardcode_automatic=no
- module_cmds=
- module_expsym_cmds=
- always_export_symbols=no
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- interix3*)
- hardcode_direct=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- link_all_deplibs=no
- else
- ld_shlibs=no
- fi
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs" = no; then
- runpath_var=
- hardcode_libdir_flag_spec=
- export_dynamic_flag_spec=
- whole_archive_flag_spec=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds=''
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct=yes
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
- archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc=no
- hardcode_direct=no
- hardcode_automatic=yes
- hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec=''
- link_all_deplibs=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- freebsd1*)
- ld_shlibs=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
-
- hardcode_direct=yes
- export_dynamic_flag_spec='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld='+b $libdir'
- hardcode_direct=no
- hardcode_shlibpath_var=no
- ;;
- *)
- hardcode_direct=yes
- export_dynamic_flag_spec='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
-
- openbsd*)
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- ;;
-
- solaris*)
- no_undefined_flag=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl, iff we do not link with $LD.
- # Luckily, gcc supports the same syntax we need for Sun Studio.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- case $wlarc in
- '')
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- *)
- whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- esac ;;
- esac
- link_all_deplibs=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds='$CC -r -o $output$reload_objs'
- hardcode_direct=no
- ;;
- motorola)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
- no_undefined_flag='${wl}-z,text'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl
- pic_flag=$lt_prog_compiler_pic
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc=no
- else
- archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var" || \
- test "X$hardcode_automatic" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6; }
-
-if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-striplib=
-old_striplib=
-{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
- else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
- ;;
- *)
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
- ;;
- esac
-fi
-
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_dl_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
-
-fi
-
- ;;
-
- *)
- { echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shl_load (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef shl_load
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
-
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_shl_load=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_shl_load=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
-if test $ac_cv_func_shl_load = yes; then
- lt_cv_dlopen="shl_load"
-else
- { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_dld_shl_load=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_shl_load=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
-if test $ac_cv_lib_dld_shl_load = yes; then
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
-else
- { echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlopen (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
-
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
-if test $ac_cv_func_dlopen = yes; then
- lt_cv_dlopen="dlopen"
-else
- { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_dl_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
- { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_svld_dlopen=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_svld_dlopen=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
-if test $ac_cv_lib_svld_dlopen = yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
- { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_dld_dld_link=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_dld_link=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
-if test $ac_cv_lib_dld_dld_link = yes; then
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 10081 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self=no
- fi
-fi
-rm -fr conftest*
-
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self_static=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-#line 10181 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}
-EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self_static=no
- fi
-fi
-rm -fr conftest*
-
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-
-
-# Report which library types will actually be built
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler \
- CC \
- LD \
- lt_prog_compiler_wl \
- lt_prog_compiler_pic \
- lt_prog_compiler_static \
- lt_prog_compiler_no_builtin_flag \
- export_dynamic_flag_spec \
- thread_safe_flag_spec \
- whole_archive_flag_spec \
- enable_shared_with_static_runtimes \
- old_archive_cmds \
- old_archive_from_new_cmds \
- predep_objects \
- postdep_objects \
- predeps \
- postdeps \
- compiler_lib_search_path \
- archive_cmds \
- archive_expsym_cmds \
- postinstall_cmds \
- postuninstall_cmds \
- old_archive_from_expsyms_cmds \
- allow_undefined_flag \
- no_undefined_flag \
- export_symbols_cmds \
- hardcode_libdir_flag_spec \
- hardcode_libdir_flag_spec_ld \
- hardcode_libdir_separator \
- hardcode_automatic \
- module_cmds \
- module_expsym_cmds \
- lt_cv_prog_compiler_c_o \
- exclude_expsyms \
- include_expsyms; do
-
- case $var in
- old_archive_cmds | \
- old_archive_from_new_cmds | \
- archive_cmds | \
- archive_expsym_cmds | \
- module_cmds | \
- module_expsym_cmds | \
- old_archive_from_expsyms_cmds | \
- export_symbols_cmds | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- { echo "$as_me:$LINENO: creating $ofile" >&5
-echo "$as_me: creating $ofile" >&6;}
-
- cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
- withval=$with_tags; tagnames="$withval"
-fi
-
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
- else
- { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
- "") ;;
- *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-echo "$as_me: error: invalid tag name: $tagname" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-hardcode_shlibpath_var_CXX=unsupported
-hardcode_automatic_CXX=no
-module_cmds_CXX=
-module_expsym_cmds_CXX=
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-enable_shared_with_static_runtimes_CXX=no
-
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-objext_CXX=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
- lt_prog_compiler_no_builtin_flag_CXX=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
-else
- { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_CXX=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_CXX=''
- hardcode_direct_CXX=yes
- hardcode_libdir_separator_CXX=':'
- link_all_deplibs_CXX=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct_CXX=yes
- else
- # We have old collect2
- hardcode_direct_CXX=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_CXX=yes
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- hardcode_libdir_separator_CXX=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_CXX=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_CXX='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_CXX="-z nodefs"
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_CXX=' ${wl}-bernotok'
- allow_undefined_flag_CXX=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_CXX='$convenience'
- archive_cmds_need_lc_CXX=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_CXX=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- allow_undefined_flag_CXX=unsupported
- always_export_symbols_CXX=no
- enable_shared_with_static_runtimes_CXX=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_CXX=no
- hardcode_direct_CXX=no
- hardcode_automatic_CXX=yes
- hardcode_shlibpath_var_CXX=unsupported
- whole_archive_flag_spec_CXX=''
- link_all_deplibs_CXX=yes
-
- if test "$GXX" = yes ; then
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- else
- archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- fi
- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_CXX=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- freebsd[12]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- ld_shlibs_CXX=no
- ;;
- freebsd-elf*)
- archive_cmds_need_lc_CXX=no
- ;;
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- ld_shlibs_CXX=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
- export_dynamic_flag_spec_CXX='${wl}-E'
- hardcode_direct_CXX=yes
- hardcode_minus_L_CXX=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aCC*)
- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
- ;;
- *)
- export_dynamic_flag_spec_CXX='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct_CXX=no
- hardcode_shlibpath_var_CXX=no
- ;;
- *)
- hardcode_direct_CXX=yes
- hardcode_minus_L_CXX=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- interix3*)
- hardcode_direct_CXX=no
- hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
- fi
- fi
- link_all_deplibs_CXX=yes
- ;;
- esac
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc*)
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- archive_cmds_need_lc_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC*)
- # Portland Group C++ compiler
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_CXX='-rpath $libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- ld_shlibs_CXX=no
- ;;
- openbsd*)
- hardcode_direct_CXX=yes
- hardcode_shlibpath_var_CXX=no
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- export_dynamic_flag_spec_CXX='${wl}-E'
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd='echo'
- ;;
- osf3*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- cxx*)
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- cxx*)
- allow_undefined_flag_CXX=' -expect_unresolved \*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
- $rm $lib.exp'
-
- hardcode_libdir_flag_spec_CXX='-rpath $libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_CXX=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- fi
- ;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- archive_cmds_need_lc_CXX=yes
- no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- hardcode_libdir_flag_spec_CXX='-R$libdir'
- hardcode_shlibpath_var_CXX=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The C++ compiler is used as linker so we must use $wl
- # flag to pass the commands to the underlying system
- # linker. We must also pass each convience library through
- # to the system linker between allextract/defaultextract.
- # The C++ compiler will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
- ;;
- esac
- link_all_deplibs_CXX=yes
-
- output_verbose_link_cmd='echo'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
- fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
- fi
- ;;
- esac
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_CXX='${wl}-z,text'
- archive_cmds_need_lc_CXX=no
- hardcode_shlibpath_var_CXX=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- # So that behaviour is only enabled if SCOABSPATH is set to a
- # non-empty value in the environment. Most likely only useful for
- # creating official distributions of packages.
- # This is a hack until libtool officially supports absolute path
- # names for shared libraries.
- no_undefined_flag_CXX='${wl}-z,text'
- allow_undefined_flag_CXX='${wl}-z,nodefs'
- archive_cmds_need_lc_CXX=no
- hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_CXX=':'
- link_all_deplibs_CXX=yes
- export_dynamic_flag_spec_CXX='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-GCC_CXX="$GXX"
-LD_CXX="$LD"
-
-
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$compiler_lib_search_path_CXX"; then
- compiler_lib_search_path_CXX="${prev}${p}"
- else
- compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$postdeps_CXX"; then
- postdeps_CXX="${prev}${p}"
- else
- postdeps_CXX="${postdeps_CXX} ${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$predep_objects_CXX"; then
- predep_objects_CXX="$p"
- else
- predep_objects_CXX="$predep_objects_CXX $p"
- fi
- else
- if test -z "$postdep_objects_CXX"; then
- postdep_objects_CXX="$p"
- else
- postdep_objects_CXX="$postdep_objects_CXX $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling CXX test program"
-fi
-
-$rm -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-case $host_os in
-interix3*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- predep_objects_CXX=
- postdep_objects_CXX=
- postdeps_CXX=
- ;;
-
-solaris*)
- case $cc_basename in
- CC*)
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- postdeps_CXX='-lCstd -lCrun'
- ;;
- esac
- ;;
-esac
-
-
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-esac
-
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_CXX='-Bstatic'
- fi
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | os2* | pw32*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_CXX='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- lt_prog_compiler_pic_CXX=
- ;;
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_CXX=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- esac
- ;;
- *)
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix4* | aix5*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_CXX='-Bstatic'
- else
- lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- chorus*)
- case $cc_basename in
- cxch68*)
- # Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
- ;;
- esac
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_CXX='-qnocommon'
- lt_prog_compiler_wl_CXX='-Wl,'
- ;;
- esac
- ;;
- dgux*)
- case $cc_basename in
- ec++*)
- lt_prog_compiler_pic_CXX='-KPIC'
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- freebsd* | dragonfly*)
- # FreeBSD uses GNU C++
- ;;
- hpux9* | hpux10* | hpux11*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
- lt_prog_compiler_pic_CXX='+Z'
- fi
- ;;
- aCC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_CXX='+Z'
- ;;
- esac
- ;;
- *)
- ;;
- esac
- ;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
- irix5* | irix6* | nonstopux*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='-non_shared'
- # CC pic flag -KPIC is the default.
- ;;
- *)
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- KCC*)
- # KAI C++ Compiler
- lt_prog_compiler_wl_CXX='--backend -Wl,'
- lt_prog_compiler_pic_CXX='-fPIC'
- ;;
- icpc* | ecpc*)
- # Intel C++
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-static'
- ;;
- pgCC*)
- # Portland Group C++ compiler.
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-fpic'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- cxx*)
- # Compaq C++
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_static_CXX='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- lynxos*)
- ;;
- m88k*)
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- lt_prog_compiler_pic_CXX='-W c,exportall'
- ;;
- *)
- ;;
- esac
- ;;
- netbsd* | netbsdelf*-gnu)
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- lt_prog_compiler_wl_CXX='--backend -Wl,'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- cxx*)
- # Digital/Compaq C++
- lt_prog_compiler_wl_CXX='-Wl,'
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_static_CXX='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- psos*)
- ;;
- solaris*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- lt_prog_compiler_wl_CXX='-Qoption ld '
- ;;
- gcx*)
- # Green Hills C++ Compiler
- lt_prog_compiler_pic_CXX='-PIC'
- ;;
- *)
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- lt_prog_compiler_pic_CXX='-pic'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- lcc*)
- # Lucid
- lt_prog_compiler_pic_CXX='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- lt_prog_compiler_pic_CXX='-KPIC'
- ;;
- *)
- ;;
- esac
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
- ;;
- esac
- ;;
- vxworks*)
- ;;
- *)
- lt_prog_compiler_can_build_shared_CXX=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works_CXX=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12549: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:12553: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_CXX=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
- case $lt_prog_compiler_pic_CXX in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
- esac
-else
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_can_build_shared_CXX=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_CXX=
- ;;
- *)
- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works_CXX=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_CXX=yes
- fi
- else
- lt_prog_compiler_static_works_CXX=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
-
-if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
- :
-else
- lt_prog_compiler_static_CXX=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o_CXX=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12653: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:12657: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_CXX=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- case $host_os in
- aix4* | aix5*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- export_symbols_cmds_CXX="$ltdll_cmds"
- ;;
- cygwin* | mingw*)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- linux* | k*bsd*-gnu)
- link_all_deplibs_CXX=no
- ;;
- *)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_CXX" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_CXX=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_CXX in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_CXX
- pic_flag=$lt_prog_compiler_pic_CXX
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
- allow_undefined_flag_CXX=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_CXX=no
- else
- archive_cmds_need_lc_CXX=yes
- fi
- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
- test -n "$runpath_var_CXX" || \
- test "X$hardcode_automatic_CXX" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_CXX" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
- test "$hardcode_minus_L_CXX" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_CXX=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_CXX=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_CXX=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-echo "${ECHO_T}$hardcode_action_CXX" >&6; }
-
-if test "$hardcode_action_CXX" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_CXX \
- CC_CXX \
- LD_CXX \
- lt_prog_compiler_wl_CXX \
- lt_prog_compiler_pic_CXX \
- lt_prog_compiler_static_CXX \
- lt_prog_compiler_no_builtin_flag_CXX \
- export_dynamic_flag_spec_CXX \
- thread_safe_flag_spec_CXX \
- whole_archive_flag_spec_CXX \
- enable_shared_with_static_runtimes_CXX \
- old_archive_cmds_CXX \
- old_archive_from_new_cmds_CXX \
- predep_objects_CXX \
- postdep_objects_CXX \
- predeps_CXX \
- postdeps_CXX \
- compiler_lib_search_path_CXX \
- archive_cmds_CXX \
- archive_expsym_cmds_CXX \
- postinstall_cmds_CXX \
- postuninstall_cmds_CXX \
- old_archive_from_expsyms_cmds_CXX \
- allow_undefined_flag_CXX \
- no_undefined_flag_CXX \
- export_symbols_cmds_CXX \
- hardcode_libdir_flag_spec_CXX \
- hardcode_libdir_flag_spec_ld_CXX \
- hardcode_libdir_separator_CXX \
- hardcode_automatic_CXX \
- module_cmds_CXX \
- module_expsym_cmds_CXX \
- lt_cv_prog_compiler_c_o_CXX \
- exclude_expsyms_CXX \
- include_expsyms_CXX; do
-
- case $var in
- old_archive_cmds_CXX | \
- old_archive_from_new_cmds_CXX | \
- archive_cmds_CXX | \
- archive_expsym_cmds_CXX | \
- module_cmds_CXX | \
- module_expsym_cmds_CXX | \
- old_archive_from_expsyms_cmds_CXX | \
- export_symbols_cmds_CXX | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_CXX
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_CXX
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_CXX"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code=" subroutine t\n return\n end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code=" program t\n end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6; }
-
-{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6; }
-
-GCC_F77="$G77"
-LD_F77="$LD"
-
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_static_F77='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_F77='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_F77='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_F77='-fno-common'
- ;;
-
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared_F77=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_F77=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_F77='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic_F77='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl_F77='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_F77='-Bstatic'
- else
- lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_F77='-qnocommon'
- lt_prog_compiler_wl_F77='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_F77='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl_F77='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_F77='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl_F77='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-fpic'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl_F77='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl_F77='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static_F77='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl_F77='-Qoption ld ';;
- *)
- lt_prog_compiler_wl_F77='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl_F77='-Qoption ld '
- lt_prog_compiler_pic_F77='-PIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic_F77='-Kconform_pic'
- lt_prog_compiler_static_F77='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_pic_F77='-KPIC'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl_F77='-Wl,'
- lt_prog_compiler_can_build_shared_F77=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic_F77='-pic'
- lt_prog_compiler_static_F77='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared_F77=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_F77"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works_F77=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_F77"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14214: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:14218: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_F77=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
- case $lt_prog_compiler_pic_F77 in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
- esac
-else
- lt_prog_compiler_pic_F77=
- lt_prog_compiler_can_build_shared_F77=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_F77=
- ;;
- *)
- lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works_F77=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_F77=yes
- fi
- else
- lt_prog_compiler_static_works_F77=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
-
-if test x"$lt_prog_compiler_static_works_F77" = xyes; then
- :
-else
- lt_prog_compiler_static_F77=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o_F77=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14318: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:14322: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_F77=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- runpath_var=
- allow_undefined_flag_F77=
- enable_shared_with_static_runtimes_F77=no
- archive_cmds_F77=
- archive_expsym_cmds_F77=
- old_archive_From_new_cmds_F77=
- old_archive_from_expsyms_cmds_F77=
- export_dynamic_flag_spec_F77=
- whole_archive_flag_spec_F77=
- thread_safe_flag_spec_F77=
- hardcode_libdir_flag_spec_F77=
- hardcode_libdir_flag_spec_ld_F77=
- hardcode_libdir_separator_F77=
- hardcode_direct_F77=no
- hardcode_minus_L_F77=no
- hardcode_shlibpath_var_F77=unsupported
- link_all_deplibs_F77=unknown
- hardcode_automatic_F77=no
- module_cmds_F77=
- module_expsym_cmds_F77=
- always_export_symbols_F77=no
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms_F77=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs_F77=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_F77='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_F77=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs_F77=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs_F77=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_F77=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_F77='-L$libdir'
- allow_undefined_flag_F77=unsupported
- always_export_symbols_F77=no
- enable_shared_with_static_runtimes_F77=yes
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- interix3*)
- hardcode_direct_F77=no
- hardcode_shlibpath_var_F77=no
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- link_all_deplibs_F77=no
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs_F77=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs_F77=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_F77=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs_F77" = no; then
- runpath_var=
- hardcode_libdir_flag_spec_F77=
- export_dynamic_flag_spec_F77=
- whole_archive_flag_spec_F77=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag_F77=unsupported
- always_export_symbols_F77=yes
- archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L_F77=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct_F77=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_F77=''
- hardcode_direct_F77=yes
- hardcode_libdir_separator_F77=':'
- link_all_deplibs_F77=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct_F77=yes
- else
- # We have old collect2
- hardcode_direct_F77=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_F77=yes
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_libdir_separator_F77=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_F77=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_F77='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_F77="-z nodefs"
- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
- program main
-
- end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_F77=' ${wl}-bernotok'
- allow_undefined_flag_F77=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_F77='$convenience'
- archive_cmds_need_lc_F77=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs_F77=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec_F77=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec_F77=' '
- allow_undefined_flag_F77=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds_F77='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes_F77=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_F77=no
- hardcode_direct_F77=no
- hardcode_automatic_F77=yes
- hardcode_shlibpath_var_F77=unsupported
- whole_archive_flag_spec_F77=''
- link_all_deplibs_F77=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_F77=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_shlibpath_var_F77=no
- ;;
-
- freebsd1*)
- ld_shlibs_F77=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes
- hardcode_minus_L_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- hardcode_direct_F77=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
-
- hardcode_direct_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_F77=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_F77='+b $libdir'
- hardcode_direct_F77=no
- hardcode_shlibpath_var_F77=no
- ;;
- *)
- hardcode_direct_F77=yes
- export_dynamic_flag_spec_F77='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_F77=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- link_all_deplibs_F77=yes
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- newsos6)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- hardcode_shlibpath_var_F77=no
- ;;
-
- openbsd*)
- hardcode_direct_F77=yes
- hardcode_shlibpath_var_F77=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_F77='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-R$libdir'
- ;;
- *)
- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_minus_L_F77=yes
- allow_undefined_flag_F77=unsupported
- archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag_F77=' -expect_unresolved \*'
- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_F77=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag_F77=' -expect_unresolved \*'
- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec_F77='-rpath $libdir'
- fi
- hardcode_libdir_separator_F77=:
- ;;
-
- solaris*)
- no_undefined_flag_F77=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec_F77='-R$libdir'
- hardcode_shlibpath_var_F77=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl, iff we do not link with $LD.
- # Luckily, gcc supports the same syntax we need for Sun Studio.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- case $wlarc in
- '')
- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
- *)
- whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- esac ;;
- esac
- link_all_deplibs_F77=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_direct_F77=yes
- hardcode_minus_L_F77=yes
- hardcode_shlibpath_var_F77=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds_F77='$CC -r -o $output$reload_objs'
- hardcode_direct_F77=no
- ;;
- motorola)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var_F77=no
- ;;
-
- sysv4.3*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_F77=no
- export_dynamic_flag_spec_F77='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_F77=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs_F77=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
- no_undefined_flag_F77='${wl}-z,text'
- archive_cmds_need_lc_F77=no
- hardcode_shlibpath_var_F77=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag_F77='${wl}-z,text'
- allow_undefined_flag_F77='${wl}-z,nodefs'
- archive_cmds_need_lc_F77=no
- hardcode_shlibpath_var_F77=no
- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_F77=':'
- link_all_deplibs_F77=yes
- export_dynamic_flag_spec_F77='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_F77='-L$libdir'
- hardcode_shlibpath_var_F77=no
- ;;
-
- *)
- ld_shlibs_F77=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-echo "${ECHO_T}$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_F77" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_F77=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_F77 in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_F77
- pic_flag=$lt_prog_compiler_pic_F77
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_F77
- allow_undefined_flag_F77=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_F77=no
- else
- archive_cmds_need_lc_F77=yes
- fi
- allow_undefined_flag_F77=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
- test -n "$runpath_var_F77" || \
- test "X$hardcode_automatic_F77" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_F77" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
- test "$hardcode_minus_L_F77" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_F77=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_F77=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_F77=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-echo "${ECHO_T}$hardcode_action_F77" >&6; }
-
-if test "$hardcode_action_F77" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_F77 \
- CC_F77 \
- LD_F77 \
- lt_prog_compiler_wl_F77 \
- lt_prog_compiler_pic_F77 \
- lt_prog_compiler_static_F77 \
- lt_prog_compiler_no_builtin_flag_F77 \
- export_dynamic_flag_spec_F77 \
- thread_safe_flag_spec_F77 \
- whole_archive_flag_spec_F77 \
- enable_shared_with_static_runtimes_F77 \
- old_archive_cmds_F77 \
- old_archive_from_new_cmds_F77 \
- predep_objects_F77 \
- postdep_objects_F77 \
- predeps_F77 \
- postdeps_F77 \
- compiler_lib_search_path_F77 \
- archive_cmds_F77 \
- archive_expsym_cmds_F77 \
- postinstall_cmds_F77 \
- postuninstall_cmds_F77 \
- old_archive_from_expsyms_cmds_F77 \
- allow_undefined_flag_F77 \
- no_undefined_flag_F77 \
- export_symbols_cmds_F77 \
- hardcode_libdir_flag_spec_F77 \
- hardcode_libdir_flag_spec_ld_F77 \
- hardcode_libdir_separator_F77 \
- hardcode_automatic_F77 \
- module_cmds_F77 \
- module_expsym_cmds_F77 \
- lt_cv_prog_compiler_c_o_F77 \
- exclude_expsyms_F77 \
- include_expsyms_F77; do
-
- case $var in
- old_archive_cmds_F77 | \
- old_archive_from_new_cmds_F77 | \
- archive_cmds_F77 | \
- archive_expsym_cmds_F77 | \
- module_cmds_F77 | \
- module_expsym_cmds_F77 | \
- old_archive_from_expsyms_cmds_F77 | \
- export_symbols_cmds_F77 | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_F77
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_F77
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_F77"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
-
-old_archive_cmds_GCJ=$old_archive_cmds
-
-
-lt_prog_compiler_no_builtin_flag_GCJ=
-
-if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16537: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:16541: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-else
- :
-fi
-
-fi
-
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
-
-{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_static_GCJ='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_GCJ='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic_GCJ='-fno-common'
- ;;
-
- interix3*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared_GCJ=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic_GCJ=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_GCJ='-fPIC'
- ;;
- esac
- ;;
-
- *)
- lt_prog_compiler_pic_GCJ='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static_GCJ='-Bstatic'
- else
- lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- lt_prog_compiler_pic_GCJ='-qnocommon'
- lt_prog_compiler_wl_GCJ='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic_GCJ='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- newsos6)
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-fpic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static_GCJ='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- lt_prog_compiler_wl_GCJ='-Qoption ld ';;
- *)
- lt_prog_compiler_wl_GCJ='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl_GCJ='-Qoption ld '
- lt_prog_compiler_pic_GCJ='-PIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic_GCJ='-Kconform_pic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_pic_GCJ='-KPIC'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl_GCJ='-Wl,'
- lt_prog_compiler_can_build_shared_GCJ=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic_GCJ='-pic'
- lt_prog_compiler_static_GCJ='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared_GCJ=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-
-{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_pic_works_GCJ=no
- ac_outfile=conftest.$ac_objext
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16805: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:16809: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_pic_works_GCJ=yes
- fi
- fi
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
- case $lt_prog_compiler_pic_GCJ in
- "" | " "*) ;;
- *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
- esac
-else
- lt_prog_compiler_pic_GCJ=
- lt_prog_compiler_can_build_shared_GCJ=no
-fi
-
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic_GCJ=
- ;;
- *)
- lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_prog_compiler_static_works_GCJ=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_prog_compiler_static_works_GCJ=yes
- fi
- else
- lt_prog_compiler_static_works_GCJ=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
-
-if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
- :
-else
- lt_prog_compiler_static_GCJ=
-fi
-
-
-{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_prog_compiler_c_o_GCJ=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16909: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:16913: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o_GCJ=yes
- fi
- fi
- chmod u+w . 2>&5
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-
-fi
-{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6; }
- if test "$hard_links" = no; then
- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
-
- runpath_var=
- allow_undefined_flag_GCJ=
- enable_shared_with_static_runtimes_GCJ=no
- archive_cmds_GCJ=
- archive_expsym_cmds_GCJ=
- old_archive_From_new_cmds_GCJ=
- old_archive_from_expsyms_cmds_GCJ=
- export_dynamic_flag_spec_GCJ=
- whole_archive_flag_spec_GCJ=
- thread_safe_flag_spec_GCJ=
- hardcode_libdir_flag_spec_GCJ=
- hardcode_libdir_flag_spec_ld_GCJ=
- hardcode_libdir_separator_GCJ=
- hardcode_direct_GCJ=no
- hardcode_minus_L_GCJ=no
- hardcode_shlibpath_var_GCJ=unsupported
- link_all_deplibs_GCJ=unknown
- hardcode_automatic_GCJ=no
- module_cmds_GCJ=
- module_expsym_cmds_GCJ=
- always_export_symbols_GCJ=no
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms_GCJ=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- ld_shlibs_GCJ=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_GCJ=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs_GCJ=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- ld_shlibs_GCJ=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag_GCJ=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- allow_undefined_flag_GCJ=unsupported
- always_export_symbols_GCJ=no
- enable_shared_with_static_runtimes_GCJ=yes
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- interix3*)
- hardcode_direct_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- link_all_deplibs_GCJ=no
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs_GCJ=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs_GCJ=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs_GCJ=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs_GCJ" = no; then
- runpath_var=
- hardcode_libdir_flag_spec_GCJ=
- export_dynamic_flag_spec_GCJ=
- whole_archive_flag_spec_GCJ=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag_GCJ=unsupported
- always_export_symbols_GCJ=yes
- archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L_GCJ=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct_GCJ=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds_GCJ=''
- hardcode_direct_GCJ=yes
- hardcode_libdir_separator_GCJ=':'
- link_all_deplibs_GCJ=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct_GCJ=yes
- else
- # We have old collect2
- hardcode_direct_GCJ=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L_GCJ=yes
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_libdir_separator_GCJ=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols_GCJ=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag_GCJ='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag_GCJ="-z nodefs"
- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`; fi
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag_GCJ=' ${wl}-bernotok'
- allow_undefined_flag_GCJ=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_GCJ='$convenience'
- archive_cmds_need_lc_GCJ=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs_GCJ=no
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec_GCJ=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec_GCJ=' '
- allow_undefined_flag_GCJ=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_From_new_cmds_GCJ='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes_GCJ=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- archive_cmds_need_lc_GCJ=no
- hardcode_direct_GCJ=no
- hardcode_automatic_GCJ=yes
- hardcode_shlibpath_var_GCJ=unsupported
- whole_archive_flag_spec_GCJ=''
- link_all_deplibs_GCJ=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- ld_shlibs_GCJ=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- freebsd1*)
- ld_shlibs_GCJ=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes
- hardcode_minus_L_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- hardcode_direct_GCJ=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
-
- hardcode_direct_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
- hardcode_direct_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- ;;
- *)
- hardcode_direct_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L_GCJ=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- link_all_deplibs_GCJ=yes
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- newsos6)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- openbsd*)
- hardcode_direct_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_GCJ='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- ;;
- *)
- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_minus_L_GCJ=yes
- allow_undefined_flag_GCJ=unsupported
- archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag_GCJ=' -expect_unresolved \*'
- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator_GCJ=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag_GCJ=' -expect_unresolved \*'
- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
- fi
- hardcode_libdir_separator_GCJ=:
- ;;
-
- solaris*)
- no_undefined_flag_GCJ=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- hardcode_libdir_flag_spec_GCJ='-R$libdir'
- hardcode_shlibpath_var_GCJ=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine linker options so we
- # cannot just pass the convience library names through
- # without $wl, iff we do not link with $LD.
- # Luckily, gcc supports the same syntax we need for Sun Studio.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- case $wlarc in
- '')
- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
- *)
- whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
- esac ;;
- esac
- link_all_deplibs_GCJ=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_direct_GCJ=yes
- hardcode_minus_L_GCJ=yes
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds_GCJ='$CC -r -o $output$reload_objs'
- hardcode_direct_GCJ=no
- ;;
- motorola)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- sysv4.3*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_GCJ=no
- export_dynamic_flag_spec_GCJ='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var_GCJ=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs_GCJ=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
- no_undefined_flag_GCJ='${wl}-z,text'
- archive_cmds_need_lc_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag_GCJ='${wl}-z,text'
- allow_undefined_flag_GCJ='${wl}-z,nodefs'
- archive_cmds_need_lc_GCJ=no
- hardcode_shlibpath_var_GCJ=no
- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator_GCJ=':'
- link_all_deplibs_GCJ=yes
- export_dynamic_flag_spec_GCJ='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec_GCJ='-L$libdir'
- hardcode_shlibpath_var_GCJ=no
- ;;
-
- *)
- ld_shlibs_GCJ=no
- ;;
- esac
- fi
-
-{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc_GCJ=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds_GCJ in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_GCJ
- pic_flag=$lt_prog_compiler_pic_GCJ
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
- allow_undefined_flag_GCJ=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
- (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_GCJ=no
- else
- archive_cmds_need_lc_GCJ=yes
- fi
- allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
- ;;
- esac
- fi
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[123]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- freebsd*) # from 4.6 on
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix3*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
- test -n "$runpath_var_GCJ" || \
- test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct_GCJ" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
- test "$hardcode_minus_L_GCJ" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action_GCJ=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action_GCJ=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action_GCJ=unsupported
-fi
-{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
-
-if test "$hardcode_action_GCJ" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_GCJ \
- CC_GCJ \
- LD_GCJ \
- lt_prog_compiler_wl_GCJ \
- lt_prog_compiler_pic_GCJ \
- lt_prog_compiler_static_GCJ \
- lt_prog_compiler_no_builtin_flag_GCJ \
- export_dynamic_flag_spec_GCJ \
- thread_safe_flag_spec_GCJ \
- whole_archive_flag_spec_GCJ \
- enable_shared_with_static_runtimes_GCJ \
- old_archive_cmds_GCJ \
- old_archive_from_new_cmds_GCJ \
- predep_objects_GCJ \
- postdep_objects_GCJ \
- predeps_GCJ \
- postdeps_GCJ \
- compiler_lib_search_path_GCJ \
- archive_cmds_GCJ \
- archive_expsym_cmds_GCJ \
- postinstall_cmds_GCJ \
- postuninstall_cmds_GCJ \
- old_archive_from_expsyms_cmds_GCJ \
- allow_undefined_flag_GCJ \
- no_undefined_flag_GCJ \
- export_symbols_cmds_GCJ \
- hardcode_libdir_flag_spec_GCJ \
- hardcode_libdir_flag_spec_ld_GCJ \
- hardcode_libdir_separator_GCJ \
- hardcode_automatic_GCJ \
- module_cmds_GCJ \
- module_expsym_cmds_GCJ \
- lt_cv_prog_compiler_c_o_GCJ \
- exclude_expsyms_GCJ \
- include_expsyms_GCJ; do
-
- case $var in
- old_archive_cmds_GCJ | \
- old_archive_from_new_cmds_GCJ | \
- archive_cmds_GCJ | \
- archive_expsym_cmds_GCJ | \
- module_cmds_GCJ | \
- module_expsym_cmds_GCJ | \
- old_archive_from_expsyms_cmds_GCJ | \
- export_symbols_cmds_GCJ | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_GCJ"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- else
- tagname=""
- fi
- ;;
-
- RC)
-
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-lt_cv_prog_compiler_c_o_RC=yes
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- compiler_RC \
- CC_RC \
- LD_RC \
- lt_prog_compiler_wl_RC \
- lt_prog_compiler_pic_RC \
- lt_prog_compiler_static_RC \
- lt_prog_compiler_no_builtin_flag_RC \
- export_dynamic_flag_spec_RC \
- thread_safe_flag_spec_RC \
- whole_archive_flag_spec_RC \
- enable_shared_with_static_runtimes_RC \
- old_archive_cmds_RC \
- old_archive_from_new_cmds_RC \
- predep_objects_RC \
- postdep_objects_RC \
- predeps_RC \
- postdeps_RC \
- compiler_lib_search_path_RC \
- archive_cmds_RC \
- archive_expsym_cmds_RC \
- postinstall_cmds_RC \
- postuninstall_cmds_RC \
- old_archive_from_expsyms_cmds_RC \
- allow_undefined_flag_RC \
- no_undefined_flag_RC \
- export_symbols_cmds_RC \
- hardcode_libdir_flag_spec_RC \
- hardcode_libdir_flag_spec_ld_RC \
- hardcode_libdir_separator_RC \
- hardcode_automatic_RC \
- module_cmds_RC \
- module_expsym_cmds_RC \
- lt_cv_prog_compiler_c_o_RC \
- exclude_expsyms_RC \
- include_expsyms_RC; do
-
- case $var in
- old_archive_cmds_RC | \
- old_archive_from_new_cmds_RC | \
- archive_cmds_RC | \
- archive_expsym_cmds_RC | \
- module_cmds_RC | \
- module_expsym_cmds_RC | \
- old_archive_from_expsyms_cmds_RC | \
- export_symbols_cmds_RC | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\$0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
- ;;
- esac
-
-cfgfile="$ofile"
-
- cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_RC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_LD_RC
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_RC"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
- ;;
-
- *)
- { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
- { (exit 1); exit 1; }; }
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
- { (exit 1); exit 1; }; }
- fi
-fi
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-for ac_prog in bash
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_path_BASH+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $BASH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_BASH="$BASH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_BASH="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-BASH=$ac_cv_path_BASH
-if test -n "$BASH"; then
- { echo "$as_me:$LINENO: result: $BASH" >&5
-echo "${ECHO_T}$BASH" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$BASH" && break
-done
-
-
-# Check whether --enable-largefile was given.
-if test "${enable_largefile+set}" = set; then
- enableval=$enable_largefile;
-fi
-
-if test "$enable_largefile" != no; then
-
- { echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
-echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6; }
-if test "${ac_cv_sys_largefile_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_sys_largefile_CC=no
- if test "$GCC" != yes; then
- ac_save_CC=$CC
- while :; do
- # IRIX 6.2 and later do not support large files by default,
- # so use the C compiler's -n32 option if that helps.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- CC="$CC -n32"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sys_largefile_CC=' -n32'; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- break
- done
- CC=$ac_save_CC
- rm -f conftest.$ac_ext
- fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
-echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6; }
- if test "$ac_cv_sys_largefile_CC" != no; then
- CC=$CC$ac_cv_sys_largefile_CC
- fi
-
- { echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
-echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6; }
-if test "${ac_cv_sys_file_offset_bits+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- while :; do
- ac_cv_sys_file_offset_bits=no
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#define _FILE_OFFSET_BITS 64
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sys_file_offset_bits=64; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- break
-done
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
-echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6; }
-if test "$ac_cv_sys_file_offset_bits" != no; then
-
-cat >>confdefs.h <<_ACEOF
-#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
-_ACEOF
-
-fi
-rm -f conftest*
- { echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
-echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6; }
-if test "${ac_cv_sys_large_files+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- while :; do
- ac_cv_sys_large_files=no
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#define _LARGE_FILES 1
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sys_large_files=1; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- break
-done
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
-echo "${ECHO_T}$ac_cv_sys_large_files" >&6; }
-if test "$ac_cv_sys_large_files" != no; then
-
-cat >>confdefs.h <<_ACEOF
-#define _LARGE_FILES $ac_cv_sys_large_files
-_ACEOF
-
-fi
-rm -f conftest*
-fi
-
-
-# Checks for programs.
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_c89=$ac_arg
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
- xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- : > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # (even with -Werror). So we grep stderr for any message
- # that says an option was ignored.
- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-
-{ echo "$as_me:$LINENO: checking for forkpty in -lutil" >&5
-echo $ECHO_N "checking for forkpty in -lutil... $ECHO_C" >&6; }
-if test "${ac_cv_lib_util_forkpty+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lutil $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char forkpty ();
-int
-main ()
-{
-return forkpty ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_util_forkpty=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_util_forkpty=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_util_forkpty" >&5
-echo "${ECHO_T}$ac_cv_lib_util_forkpty" >&6; }
-if test $ac_cv_lib_util_forkpty = yes; then
- UTIL_LIBS="-lutil"
-else
- { { echo "$as_me:$LINENO: error: libutil is
-required in order to compile LinuxTraceToolkit" >&5
-echo "$as_me: error: libutil is
-required in order to compile LinuxTraceToolkit" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-
-# pthread for lttd
-{ echo "$as_me:$LINENO: checking for pthread_join in -lpthread" >&5
-echo $ECHO_N "checking for pthread_join in -lpthread... $ECHO_C" >&6; }
-if test "${ac_cv_lib_pthread_pthread_join+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_join ();
-int
-main ()
-{
-return pthread_join ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_pthread_pthread_join=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_pthread_pthread_join=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_join" >&5
-echo "${ECHO_T}$ac_cv_lib_pthread_pthread_join" >&6; }
-if test $ac_cv_lib_pthread_pthread_join = yes; then
- THREAD_LIBS="-lpthread"
-else
- { { echo "$as_me:$LINENO: error: LinuxThreads is required in order to compile lttd" >&5
-echo "$as_me: error: LinuxThreads is required in order to compile lttd" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-# Checks for header files.
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-
-
-
-
-
-
-for ac_header in fcntl.h stdlib.h string.h sys/time.h unistd.h pthread.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## --------------------------------- ##
-## Report this to BUG-REPORT-ADDRESS ##
-## --------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
- { echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5
-echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6; }
-if test "${ac_cv_lib_cposix_strerror+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcposix $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strerror ();
-int
-main ()
-{
-return strerror ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_cposix_strerror=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_cposix_strerror=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5
-echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6; }
-if test $ac_cv_lib_cposix_strerror = yes; then
- LIBS="$LIBS -lcposix"
-fi
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_c89=$ac_arg
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
- xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- : > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # (even with -Werror). So we grep stderr for any message
- # that says an option was ignored.
- if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-
-
-
-{ echo "$as_me:$LINENO: checking for ${CC-cc} option to accept ANSI C" >&5
-echo $ECHO_N "checking for ${CC-cc} option to accept ANSI C... $ECHO_C" >&6; }
-if test "${am_cv_prog_cc_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- am_cv_prog_cc_stdc=no
-ac_save_CC="$CC"
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-
-int
-main ()
-{
-
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- am_cv_prog_cc_stdc="$ac_arg"; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-CC="$ac_save_CC"
-
-fi
-
-if test -z "$am_cv_prog_cc_stdc"; then
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; }
-else
- { echo "$as_me:$LINENO: result: $am_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$am_cv_prog_cc_stdc" >&6; }
-fi
-case "x$am_cv_prog_cc_stdc" in
- x|xno) ;;
- *) CC="$CC $am_cv_prog_cc_stdc" ;;
-esac
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-
-PACKAGE_CFLAGS="-Wall -Wformat"
-
-
-
-# Checks for typedefs, structures, and compiler characteristics.
-{ echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5
-echo $ECHO_N "checking for stdbool.h that conforms to C99... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdbool_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-#include <stdbool.h>
-#ifndef bool
- "error: bool is not defined"
-#endif
-#ifndef false
- "error: false is not defined"
-#endif
-#if false
- "error: false is not 0"
-#endif
-#ifndef true
- "error: true is not defined"
-#endif
-#if true != 1
- "error: true is not 1"
-#endif
-#ifndef __bool_true_false_are_defined
- "error: __bool_true_false_are_defined is not defined"
-#endif
-
- struct s { _Bool s: 1; _Bool t; } s;
-
- char a[true == 1 ? 1 : -1];
- char b[false == 0 ? 1 : -1];
- char c[__bool_true_false_are_defined == 1 ? 1 : -1];
- char d[(bool) 0.5 == true ? 1 : -1];
- bool e = &s;
- char f[(_Bool) 0.0 == false ? 1 : -1];
- char g[true];
- char h[sizeof (_Bool)];
- char i[sizeof s.t];
- enum { j = false, k = true, l = false * true, m = true * 256 };
- _Bool n[m];
- char o[sizeof n == m * sizeof n[0] ? 1 : -1];
- char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
-# if defined __xlc__ || defined __GNUC__
- /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0
- reported by James Lemley on 2005-10-05; see
- http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html
- This test is not quite right, since xlc is allowed to
- reject this program, as the initializer for xlcbug is
- not one of the forms that C requires support for.
- However, doing the test right would require a runtime
- test, and that would make cross-compilation harder.
- Let us hope that IBM fixes the xlc bug, and also adds
- support for this kind of constant expression. In the
- meantime, this test will reject xlc, which is OK, since
- our stdbool.h substitute should suffice. We also test
- this with GCC, where it should work, to detect more
- quickly whether someone messes up the test in the
- future. */
- char digs[] = "0123456789";
- int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1);
-# endif
- /* Catch a bug in an HP-UX C compiler. See
- http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
- http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
- */
- _Bool q = true;
- _Bool *pq = &q;
-
-int
-main ()
-{
-
- *pq |= q;
- *pq |= ! q;
- /* Refer to every declared value, to avoid compiler optimizations. */
- return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
- + !m + !n + !o + !p + !q + !pq);
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdbool_h=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdbool_h=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
-echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6; }
-{ echo "$as_me:$LINENO: checking for _Bool" >&5
-echo $ECHO_N "checking for _Bool... $ECHO_C" >&6; }
-if test "${ac_cv_type__Bool+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef _Bool ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type__Bool=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type__Bool=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
-echo "${ECHO_T}$ac_cv_type__Bool" >&6; }
-if test $ac_cv_type__Bool = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE__BOOL 1
-_ACEOF
-
-
-fi
-
-if test $ac_cv_header_stdbool_h = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STDBOOL_H 1
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; }
-if test "${ac_cv_c_const+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-/* FIXME: Include the comments suggested by Paul. */
-#ifndef __cplusplus
- /* Ultrix mips cc rejects this. */
- typedef int charset[2];
- const charset x;
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *ccp;
- char **p;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
- ccp = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++ccp;
- p = (char**) ccp;
- ccp = (char const *const *) p;
- { /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
- if (s) return 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
- if (!foo) return 0;
- }
- return !x[0] && !zero.x;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_const=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_c_const=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-echo "${ECHO_T}$ac_cv_c_const" >&6; }
-if test $ac_cv_c_const = no; then
-
-cat >>confdefs.h <<\_ACEOF
-#define const
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for inline" >&5
-echo $ECHO_N "checking for inline... $ECHO_C" >&6; }
-if test "${ac_cv_c_inline+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_inline=$ac_kw
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_inline" != no && break
-done
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
-echo "${ECHO_T}$ac_cv_c_inline" >&6; }
-
-
-case $ac_cv_c_inline in
- inline | yes) ;;
- *)
- case $ac_cv_c_inline in
- no) ac_val=;;
- *) ac_val=$ac_cv_c_inline;;
- esac
- cat >>confdefs.h <<_ACEOF
-#ifndef __cplusplus
-#define inline $ac_val
-#endif
-_ACEOF
- ;;
-esac
-
-{ echo "$as_me:$LINENO: checking for off_t" >&5
-echo $ECHO_N "checking for off_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_off_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef off_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_off_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_off_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
-echo "${ECHO_T}$ac_cv_type_off_t" >&6; }
-if test $ac_cv_type_off_t = yes; then
- :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define off_t long int
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_size_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef size_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_size_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_size_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-echo "${ECHO_T}$ac_cv_type_size_t" >&6; }
-if test $ac_cv_type_size_t = yes; then
- :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define size_t unsigned int
-_ACEOF
-
-fi
-
-{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; }
-if test "${ac_cv_header_time+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_time=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_time=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
-echo "${ECHO_T}$ac_cv_header_time" >&6; }
-if test $ac_cv_header_time = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define TIME_WITH_SYS_TIME 1
-_ACEOF
-
-fi
-
-
-# Checks for library functions.
-{ echo "$as_me:$LINENO: checking for error_at_line" >&5
-echo $ECHO_N "checking for error_at_line... $ECHO_C" >&6; }
-if test "${ac_cv_lib_error_at_line+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-error_at_line (0, 0, "", 0, "");
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_error_at_line=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_error_at_line=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_error_at_line" >&5
-echo "${ECHO_T}$ac_cv_lib_error_at_line" >&6; }
-if test $ac_cv_lib_error_at_line = no; then
- case " $LIBOBJS " in
- *" error.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS error.$ac_objext"
- ;;
-esac
-
-fi
-
-#AC_FUNC_MALLOC
-
-
-for ac_header in sys/select.h sys/socket.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- ( cat <<\_ASBOX
-## --------------------------------- ##
-## Report this to BUG-REPORT-ADDRESS ##
-## --------------------------------- ##
-_ASBOX
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-{ echo "$as_me:$LINENO: checking types of arguments for select" >&5
-echo $ECHO_N "checking types of arguments for select... $ECHO_C" >&6; }
-if test "${ac_cv_func_select_args+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- for ac_arg234 in 'fd_set *' 'int *' 'void *'; do
- for ac_arg1 in 'int' 'size_t' 'unsigned long int' 'unsigned int'; do
- for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#if HAVE_SYS_SELECT_H
-# include <sys/select.h>
-#endif
-#if HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
-
-int
-main ()
-{
-extern int select ($ac_arg1,
- $ac_arg234, $ac_arg234, $ac_arg234,
- $ac_arg5);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
- done
-done
-# Provide a safe default value.
-: ${ac_cv_func_select_args='int,int *,struct timeval *'}
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_select_args" >&5
-echo "${ECHO_T}$ac_cv_func_select_args" >&6; }
-ac_save_IFS=$IFS; IFS=','
-set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'`
-IFS=$ac_save_IFS
-shift
-
-cat >>confdefs.h <<_ACEOF
-#define SELECT_TYPE_ARG1 $1
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define SELECT_TYPE_ARG234 ($2)
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define SELECT_TYPE_ARG5 ($3)
-_ACEOF
-
-rm -f conftest*
-
-
-for ac_func in select
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-#CPPFLAGS="$CPPFLAGS -I"
-
-DEFAULT_INCLUDES="-I\$(top_srcdir) -I\$(top_builddir)"
-
-#CPPFLAGS="${GLIB_CFLAGS}"
-#AC_SUBST(CPPFLAGS)
-
-lttctlincludedir="${includedir}/liblttctl"
-
-
-
-
-
-
-ac_config_files="$ac_config_files Makefile liblttctl/Makefile lttctl/Makefile lttd/Makefile facilities/Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-# Find out whether ``test -x'' works. Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- as_executable_p="test -x"
-else
- as_executable_p=:
-fi
-rm -f conf$$.file
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by FULL-PACKAGE-NAME $as_me VERSION, which was
-generated by GNU Autoconf 2.60. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-FULL-PACKAGE-NAME config.status VERSION
-configured by $0, generated by GNU Autoconf 2.60,
- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2006 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- { echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- CONFIG_SHELL=$SHELL
- export CONFIG_SHELL
- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "liblttctl/Makefile") CONFIG_FILES="$CONFIG_FILES liblttctl/Makefile" ;;
- "lttctl/Makefile") CONFIG_FILES="$CONFIG_FILES lttctl/Makefile" ;;
- "lttd/Makefile") CONFIG_FILES="$CONFIG_FILES lttd/Makefile" ;;
- "facilities/Makefile") CONFIG_FILES="$CONFIG_FILES facilities/Makefile" ;;
-
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp=
- trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-
-_ACEOF
-
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-AMTAR!$AMTAR$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-DEPDIR!$DEPDIR$ac_delim
-am__include!$am__include$ac_delim
-am__quote!$am__quote$ac_delim
-AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-CCDEPMODE!$CCDEPMODE$ac_delim
-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-LN_S!$LN_S$ac_delim
-ECHO!$ECHO$ac_delim
-AR!$AR$ac_delim
-RANLIB!$RANLIB$ac_delim
-CPP!$CPP$ac_delim
-CXX!$CXX$ac_delim
-CXXFLAGS!$CXXFLAGS$ac_delim
-ac_ct_CXX!$ac_ct_CXX$ac_delim
-CXXDEPMODE!$CXXDEPMODE$ac_delim
-am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
-am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
-CXXCPP!$CXXCPP$ac_delim
-F77!$F77$ac_delim
-FFLAGS!$FFLAGS$ac_delim
-ac_ct_F77!$ac_ct_F77$ac_delim
-LIBTOOL!$LIBTOOL$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
-_ACEOF
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-BASH!$BASH$ac_delim
-PACKAGE_CFLAGS!$PACKAGE_CFLAGS$ac_delim
-PACKAGE_LIBS!$PACKAGE_LIBS$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-lttctlincludedir!$lttctlincludedir$ac_delim
-UTIL_LIBS!$UTIL_LIBS$ac_delim
-THREAD_LIBS!$THREAD_LIBS$ac_delim
-DEFAULT_INCLUDES!$DEFAULT_INCLUDES$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 9; then
- break
- elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
-_ACEOF
-
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- ac_file_inputs="$ac_file_inputs $ac_f"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input="Generated from "`IFS=:
- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- fi
-
- case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin";;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-
-case `sed -n '/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
-
- rm -f "$tmp/stdin"
- case $ac_file in
- -) cat "$tmp/out"; rm -f "$tmp/out";;
- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
- esac
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
-_ACEOF
-
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status. If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless. But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
-ac_dB='\\)[ (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
-
-uniq confdefs.h |
- sed -n '
- t rset
- :rset
- s/^[ ]*#[ ]*define[ ][ ]*//
- t ok
- d
- :ok
- s/[\\&,]/\\&/g
- s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
- s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
- ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[ #]*u.*,/* & */,' >>conftest.defines
-
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
-do
- # Write a here document:
- cat >>$CONFIG_STATUS <<_ACEOF
- # First, check the format of the line:
- cat >"\$tmp/defines.sed" <<\\CEOF
-/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
-/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
-b
-:def
-_ACEOF
- sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
- sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
- ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
- sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
- grep . conftest.tail >/dev/null || break
- rm -f conftest.defines
- mv conftest.tail conftest.defines
-done
-rm -f conftest.defines conftest.tail
-
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
-cat >>$CONFIG_STATUS <<\_ACEOF
- if test x"$ac_file" != x-; then
- echo "/* $configure_input */" >"$tmp/config.h"
- cat "$ac_result" >>"$tmp/config.h"
- if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f $ac_file
- mv "$tmp/config.h" $ac_file
- fi
- else
- echo "/* $configure_input */"
- cat "$ac_result"
- fi
- rm -f "$tmp/out12"
-# Compute $ac_file's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $ac_file | $ac_file:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X$ac_file : 'X\(//\)[^/]' \| \
- X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
-echo X$ac_file |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
- :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
- test -z "$DEPDIR" && continue
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n -e '/^U = / s///p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n -e '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir=$dirpart/$fdir
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
-
- esac
-done # for ac_tag
-
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
+++ /dev/null
-# This file is part of the Linux Trace Toolkit viewer
-# Copyright (C) 2003-2004 Mathieu Desnoyers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License Version 2 as
-# published by the Free Software Foundation;
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston,
-# MA 02111-1307, USA.
-
-
-
-# -*- Autoconf -*-
-# Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.57)
-AC_INIT(FULL-PACKAGE-NAME, VERSION, BUG-REPORT-ADDRESS)
-#AC_WITH_LTDL # not needed ?
-AM_INIT_AUTOMAKE(ltt-control,0.24-17092006)
-AM_CONFIG_HEADER(config.h)
-AM_PROG_LIBTOOL
-
-AC_PATH_PROGS(BASH, bash)
-
-AC_SYS_LARGEFILE
-
-# Checks for programs.
-AC_PROG_CC
-
-AC_CHECK_LIB([util], [forkpty], UTIL_LIBS="-lutil", AC_MSG_ERROR([libutil is
-required in order to compile LinuxTraceToolkit]))
-
-
-# pthread for lttd
-AC_CHECK_LIB(pthread, pthread_join,[THREAD_LIBS="-lpthread"], AC_MSG_ERROR([LinuxThreads is required in order to compile lttd]))
-
-# Checks for header files.
-AC_HEADER_STDC
-AC_CHECK_HEADERS([fcntl.h stdlib.h string.h sys/time.h unistd.h pthread.h])
-
-AC_ISC_POSIX
-AC_PROG_CC
-AM_PROG_CC_STDC
-AC_HEADER_STDC
-
-PACKAGE_CFLAGS="-Wall -Wformat"
-AC_SUBST(PACKAGE_CFLAGS)
-AC_SUBST(PACKAGE_LIBS)
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_HEADER_STDBOOL
-AC_C_CONST
-AC_C_INLINE
-AC_TYPE_OFF_T
-AC_TYPE_SIZE_T
-AC_HEADER_TIME
-
-# Checks for library functions.
-AC_FUNC_ERROR_AT_LINE
-#AC_FUNC_MALLOC
-AC_FUNC_SELECT_ARGTYPES
-AC_CHECK_FUNCS([select])
-
-#CPPFLAGS="$CPPFLAGS -I"
-
-DEFAULT_INCLUDES="-I\$(top_srcdir) -I\$(top_builddir)"
-
-#CPPFLAGS="${GLIB_CFLAGS}"
-#AC_SUBST(CPPFLAGS)
-
-lttctlincludedir="${includedir}/liblttctl"
-
-AC_SUBST(lttctlincludedir)
-AC_SUBST(UTIL_LIBS)
-AC_SUBST(THREAD_LIBS)
-AC_SUBST(DEFAULT_INCLUDES)
-
-AC_CONFIG_FILES([Makefile
- liblttctl/Makefile
- lttctl/Makefile
- lttd/Makefile
- facilities/Makefile])
-AC_OUTPUT
+++ /dev/null
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
- base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
- dir=`echo "$object" | sed 's,/.*$,/,'`
- if test "$dir" = "$object"; then
- dir=
- fi
- # FIXME: should be _deps on DOS.
- depfile="$dir.deps/$base"
-fi
-
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
- stat=$?
-
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- outname="$stripped.o"
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- tmpdepfile1="$dir.libs/$base.lo.d"
- tmpdepfile2="$dir.libs/$base.d"
- "$@" -Wc,-MD
- else
- tmpdepfile1="$dir$base.o.d"
- tmpdepfile2="$dir$base.d"
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- if test -f "$tmpdepfile1"; then
- tmpdepfile="$tmpdepfile1"
- else
- tmpdepfile="$tmpdepfile2"
- fi
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
- "$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- "$@" || exit $?
- IFS=" "
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# facilities/Makefile. Generated from Makefile.in by configure.
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-srcdir = .
-top_srcdir = ..
-
-pkgdatadir = $(datadir)/ltt-control
-pkglibdir = $(libdir)/ltt-control
-pkgincludedir = $(includedir)/ltt-control
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /usr/bin/install -c
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = i686-pc-linux-gnu
-ACLOCAL = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run aclocal-1.7
-AMDEP_FALSE = #
-AMDEP_TRUE =
-AMTAR = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoconf
-AUTOHEADER = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoheader
-AUTOMAKE = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run automake-1.7
-AWK = mawk
-BASH = /bin/sh
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2
-CPP = gcc -E
-CPPFLAGS =
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEFAULT_INCLUDES = -I$(top_srcdir) -I$(top_builddir)
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C =
-ECHO_N = -n
-ECHO_T =
-EGREP = /bin/grep -E
-EXEEXT =
-F77 =
-FFLAGS =
-GREP = /bin/grep
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-LDFLAGS =
-LIBOBJS =
-LIBS =
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS =
-MAKEINFO = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run makeinfo
-OBJEXT = o
-PACKAGE = ltt-control
-PACKAGE_BUGREPORT = BUG-REPORT-ADDRESS
-PACKAGE_CFLAGS = -Wall -Wformat
-PACKAGE_LIBS =
-PACKAGE_NAME = FULL-PACKAGE-NAME
-PACKAGE_STRING = FULL-PACKAGE-NAME VERSION
-PACKAGE_TARNAME = full-package-name
-PACKAGE_VERSION = VERSION
-PATH_SEPARATOR = :
-RANLIB = ranlib
-SET_MAKE =
-SHELL = /bin/sh
-STRIP = strip
-THREAD_LIBS = -lpthread
-UTIL_LIBS = -lutil
-VERSION = 0.24-17092006
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 =
-am__fastdepCC_FALSE = #
-am__fastdepCC_TRUE =
-am__fastdepCXX_FALSE = #
-am__fastdepCXX_TRUE =
-am__include = include
-am__leading_dot = .
-am__quote =
-bindir = ${exec_prefix}/bin
-build = i686-pc-linux-gnu
-build_alias =
-build_cpu = i686
-build_os = linux-gnu
-build_vendor = pc
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = i686-pc-linux-gnu
-host_alias =
-host_cpu = i686
-host_os = linux-gnu
-host_vendor = pc
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = /usr/src/ltt-control-0.24-17092006/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-lttctlincludedir = ${prefix}/include/liblttctl
-mandir = ${datarootdir}/man
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-sysconfdir = ${prefix}/etc
-target_alias =
-
-EXTRA_DIST = \
-core.xml \
-fs.xml \
-fs_data.xml \
-ipc.xml \
-kernel.xml \
-kernel_arch_arm.xml \
-kernel_arch_c2.xml \
-kernel_arch_i386.xml \
-kernel_arch_mips.xml \
-kernel_arch_powerpc.xml \
-kernel_arch_ppc.xml \
-kernel_arch_x86_64.xml \
-locking.xml \
-memory.xml \
-network.xml \
-process.xml \
-socket.xml \
-stack.xml \
-statedump.xml \
-timer.xml \
-user_generic.xml \
-network_ip_interface.xml \
-xenoltt.xml
-
-
-facilities_DATA = \
-core.xml \
-fs.xml \
-fs_data.xml \
-ipc.xml \
-kernel.xml \
-kernel_arch_arm.xml \
-kernel_arch_c2.xml \
-kernel_arch_i386.xml \
-kernel_arch_mips.xml \
-kernel_arch_powerpc.xml \
-kernel_arch_ppc.xml \
-kernel_arch_x86_64.xml \
-locking.xml \
-memory.xml \
-network.xml \
-process.xml \
-socket.xml \
-stack.xml \
-statedump.xml \
-timer.xml \
-user_generic.xml \
-network_ip_interface.xml \
-xenoltt.xml
-
-
-facilitiesdir = $(pkgdatadir)/facilities
-subdir = facilities
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DATA = $(facilities_DATA)
-
-DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu facilities/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-facilitiesDATA_INSTALL = $(INSTALL_DATA)
-install-facilitiesDATA: $(facilities_DATA)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(facilitiesdir)
- @list='$(facilities_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(facilitiesDATA_INSTALL) $$d$$p $(DESTDIR)$(facilitiesdir)/$$f"; \
- $(facilitiesDATA_INSTALL) $$d$$p $(DESTDIR)$(facilitiesdir)/$$f; \
- done
-
-uninstall-facilitiesDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(facilities_DATA)'; for p in $$list; do \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " rm -f $(DESTDIR)$(facilitiesdir)/$$f"; \
- rm -f $(DESTDIR)$(facilitiesdir)/$$f; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(facilitiesdir)
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-facilitiesDATA
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-facilitiesDATA uninstall-info-am
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am \
- install-facilitiesDATA install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- uninstall uninstall-am uninstall-facilitiesDATA \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-
-EXTRA_DIST = \
-core.xml \
-fs.xml \
-fs_data.xml \
-ipc.xml \
-kernel.xml \
-kernel_arch_arm.xml \
-kernel_arch_c2.xml \
-kernel_arch_i386.xml \
-kernel_arch_mips.xml \
-kernel_arch_powerpc.xml \
-kernel_arch_ppc.xml \
-kernel_arch_x86_64.xml \
-locking.xml \
-memory.xml \
-network.xml \
-process.xml \
-socket.xml \
-stack.xml \
-statedump.xml \
-timer.xml \
-user_generic.xml \
-network_ip_interface.xml \
-xenoltt.xml
-
-facilities_DATA = \
-core.xml \
-fs.xml \
-fs_data.xml \
-ipc.xml \
-kernel.xml \
-kernel_arch_arm.xml \
-kernel_arch_c2.xml \
-kernel_arch_i386.xml \
-kernel_arch_mips.xml \
-kernel_arch_powerpc.xml \
-kernel_arch_ppc.xml \
-kernel_arch_x86_64.xml \
-locking.xml \
-memory.xml \
-network.xml \
-process.xml \
-socket.xml \
-stack.xml \
-statedump.xml \
-timer.xml \
-user_generic.xml \
-network_ip_interface.xml \
-xenoltt.xml
-
-
-facilitiesdir = $(pkgdatadir)/facilities
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_CFLAGS = @PACKAGE_CFLAGS@
-PACKAGE_LIBS = @PACKAGE_LIBS@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-THREAD_LIBS = @THREAD_LIBS@
-UTIL_LIBS = @UTIL_LIBS@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lttctlincludedir = @lttctlincludedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-EXTRA_DIST = \
-core.xml \
-fs.xml \
-fs_data.xml \
-ipc.xml \
-kernel.xml \
-kernel_arch_arm.xml \
-kernel_arch_c2.xml \
-kernel_arch_i386.xml \
-kernel_arch_mips.xml \
-kernel_arch_powerpc.xml \
-kernel_arch_ppc.xml \
-kernel_arch_x86_64.xml \
-locking.xml \
-memory.xml \
-network.xml \
-process.xml \
-socket.xml \
-stack.xml \
-statedump.xml \
-timer.xml \
-user_generic.xml \
-network_ip_interface.xml \
-xenoltt.xml
-
-
-facilities_DATA = \
-core.xml \
-fs.xml \
-fs_data.xml \
-ipc.xml \
-kernel.xml \
-kernel_arch_arm.xml \
-kernel_arch_c2.xml \
-kernel_arch_i386.xml \
-kernel_arch_mips.xml \
-kernel_arch_powerpc.xml \
-kernel_arch_ppc.xml \
-kernel_arch_x86_64.xml \
-locking.xml \
-memory.xml \
-network.xml \
-process.xml \
-socket.xml \
-stack.xml \
-statedump.xml \
-timer.xml \
-user_generic.xml \
-network_ip_interface.xml \
-xenoltt.xml
-
-
-facilitiesdir = $(pkgdatadir)/facilities
-subdir = facilities
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DATA = $(facilities_DATA)
-
-DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu facilities/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-facilitiesDATA_INSTALL = $(INSTALL_DATA)
-install-facilitiesDATA: $(facilities_DATA)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(facilitiesdir)
- @list='$(facilities_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(facilitiesDATA_INSTALL) $$d$$p $(DESTDIR)$(facilitiesdir)/$$f"; \
- $(facilitiesDATA_INSTALL) $$d$$p $(DESTDIR)$(facilitiesdir)/$$f; \
- done
-
-uninstall-facilitiesDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(facilities_DATA)'; for p in $$list; do \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " rm -f $(DESTDIR)$(facilitiesdir)/$$f"; \
- rm -f $(DESTDIR)$(facilitiesdir)/$$f; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(facilitiesdir)
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-facilitiesDATA
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-facilitiesDATA uninstall-info-am
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am \
- install-facilitiesDATA install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- uninstall uninstall-am uninstall-facilitiesDATA \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="core">
- <description>The core facility contains the basic tracing related events</description>
-
- <event name="facility_load">
- <description>Facility is loaded</description>
- <field name="name"><string/></field>
- <field name="checksum"><uint size="4"/></field>
- <field name="id"><uint size="4"/></field>
- <field name="int_size"><uint size="4"/></field>
- <field name="long_size"><uint size="4"/></field>
- <field name="pointer_size"><uint size="4"/></field>
- <field name="size_t_size"><uint size="4"/></field>
- <field name="has_alignment"><uint size="4"/></field>
- </event>
-
- <event name="facility_unload">
- <description>Facility is unloaded</description>
- <field name="id"><uint size="4"/></field>
- </event>
-
- <event name="time_heartbeat" scope="tracefile">
- <description>System time values sent periodically to detect cycle counter
- rollovers. Useful when only the 32 LSB of the TSC are saved in events
- header : we save the full 64 bits in this event.
- </description>
- </event>
-
- <event name="state_dump_facility_load" scope="trace">
- <description>Facility is loaded while in state dump</description>
- <field name="name"><string/></field>
- <field name="checksum"><uint size="4"/></field>
- <field name="id"><uint size="4"/></field>
- <field name="int_size"><uint size="4"/></field>
- <field name="long_size"><uint size="4"/></field>
- <field name="pointer_size"><uint size="4"/></field>
- <field name="size_t_size"><uint size="4"/></field>
- <field name="has_alignment"><uint size="4"/></field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="fs">
- <description>The fs facility contains events related to file system operation</description>
-
- <event name="buf_wait_start">
- <description>Staring to wait for a buffer</description>
- <field name="address"> <description>Address of the buffer head.</description> <pointer/> </field>
- </event>
-
- <event name="buf_wait_end">
- <description>Ending to wait for a buffer</description>
- <field name="address"> <description>Address of the buffer head.</description> <pointer/> </field>
- </event>
-
- <event name="exec">
- <description>Executing a file</description>
- <field name="filename"> <description>File name</description>
- <sequence>
- <uint/>
- <uchar/>
- </sequence>
- </field>
- </event>
-
- <event name="open">
- <description>Opening a file</description>
- <field name="filename"> <description>File name</description>
- <sequence>
- <uint/>
- <uchar/>
- </sequence>
- </field>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- </event>
-
- <event name="close">
- <description>Closing a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- </event>
-
- <event name="read">
- <description>Reading from a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- <field name="count"> <description>Number of bytes to read</description> <size_t/> </field>
- </event>
-
- <event name="write">
- <description>Write to a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- <field name="count"> <description>Number of bytes to write</description> <size_t/> </field>
- </event>
-
- <event name="seek">
- <description>Seek a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- <field name="offset"> <description>Number of bytes to write</description> <off_t/> </field>
- <field name="origin"> <description>Number of bytes to write</description> <uint size="4"/> </field>
- </event>
-
- <event name="ioctl">
- <description>Do a IOCTL on a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- <field name="cmd"> <description>Command</description> <uint size="4"/> </field>
- <field name="arg"> <description>Argument</description> <uint size="4"/> </field>
- </event>
-
- <event name="select">
- <description>Do a select on a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- <field name="timeout"> <description>Time out</description> <ulong/> </field>
- </event>
-
- <event name="poll">
- <description>Do a poll on a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="fs_data">
- <description>The fs_data facility contains events related to file system data input/output</description>
-
- <event name="read">
- <description>Reading from a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- <field name="count"> <description>Number of bytes to read</description> <size_t/> </field>
- <field name="data"> <description>data read</description>
- <sequence write="custom">
- <uint/>
- <uchar/>
- </sequence>
- </field>
- </event>
-
- <event name="write">
- <description>Write to a file descriptor</description>
- <field name="fd"> <description>File descriptor</description> <uint size="4"/> </field>
- <field name="count"> <description>Number of bytes to write</description> <size_t/> </field>
- <field name="data"> <description>data written</description>
- <sequence write="custom">
- <uint/>
- <uchar/>
- </sequence>
- </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="ipc">
- <description>The ipc facility contains events related to Inter Process Communication</description>
-
- <event name="call">
-
- <description>IPC call</description>
- <field name="call_number"> <description>Number of IPC call</description> <uint size="4"/> </field>
- <field name="first"> <description>First argument</description> <int size="4"/> </field>
- </event>
-
- <event name="msg_create">
- <description>Get an IPC message queue identifier</description>
- <field name="id"> <description>Message queue identifier</description><long/> </field>
- <field name="flags"> <description>Message flags</description> <int size="4"/> </field>
- </event>
-
- <event name="sem_create">
- <description>Get an IPC semaphore identifier</description>
- <field name="id"> <description>Semaphore identifier</description> <long/> </field>
- <field name="flags"> <description>Semaphore flags</description> <int size="4"/> </field>
- </event>
-
- <event name="shm_create">
- <description>Get an IPC shared memory identifier</description>
- <field name="id"> <description>Shared memory identifier</description> <long/> </field>
- <field name="flags"> <description>Shared memory flags</description> <int size="4"/> </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="kernel">
- <description>The kernel facility has events related to kernel execution status.</description>
-
- <type name="tasklet_priority">
- <enum>
- <label name="LOW" value="0"/> <description>Low priority tasklet</description>
- <label name="HIGH" value="1"/> <description>High priority tasklet</description>
- </enum>
- </type>
-
- <type name="irq_mode">
- <enum>
- <label name="user" value="0"/> <description>User context</description>
- <label name="kernel" value="1"/> <description>Kernel context</description>
- </enum>
- </type>
-
- <event name="trap_entry">
- <description>Entry in a trap</description>
- <field name="trap_id"> <description>Trap number</description> <long/> </field>
- <field name="address"> <description>Address where trap occured</description> <pointer/> </field>
- </event>
-
- <event name="trap_exit">
- <description>Exit from a trap</description>
- </event>
-
- <event name="soft_irq_entry">
- <description>Soft IRQ entry</description>
- <field name="softirq_id"> <description>Soft IRQ number</description> <pointer/> </field>
- </event>
-
- <event name="soft_irq_exit">
- <description>Soft IRQ exit</description>
- <field name="softirq_id"> <description>Soft IRQ number</description> <pointer/> </field>
- </event>
-
- <event name="tasklet_entry">
- <description>Tasklet entry</description>
- <field name="priority"> <description>Tasklet priority</description> <typeref name="tasklet_priority"/> </field>
- <field name="address"> <description>Tasklet function address</description> <pointer/> </field>
- <field name="data"> <description>Tasklet data address</description> <ulong/> </field>
- </event>
-
- <event name="tasklet_exit">
- <description>Tasklet exit</description>
- <field name="priority"> <description>Tasklet priority</description> <typeref name="tasklet_priority"/> </field>
- <field name="address"> <description>Tasklet function address</description> <pointer/> </field>
- <field name="data"> <description>Tasklet data address</description> <ulong/> </field>
- </event>
-
- <event name="irq_entry">
- <description>Entry in an irq</description>
- <field name="irq_id"> <description>IRQ number</description> <uint size="4"/> </field>
- <field name="mode"> <description>Are we executing kernel code</description><typeref name="irq_mode"/> </field>
- </event>
-
- <event name="irq_exit">
- <description>Exit from an IRQ</description>
- </event>
-
- <event name="printk">
- <description>Kernel printk</description>
- <field name="loglevel"> <description>loglevel</description>
- <uint size="1"/>
- </field>
- <field name="text"> <description>printk string</description>
- <sequence>
- <uint/>
- <uchar/>
- </sequence>
- </field>
- </event>
-
- <event name="printk_locate">
- <description>Kernel printk location</description>
- <field name="file"> <description>Source file</description>
- <string/>
- </field>
- <field name="function"> <description>Function</description>
- <string/>
- </field>
- <field name="line"> <description>Line in source file</description>
- <uint/>
- </field>
- <field name="address"> <description>Caller address</description>
- <pointer/>
- </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="kernel_arch" arch="arm">
- <description>The kernel facility has events related to kernel execution status for the arm architecture.</description>
- <type name="syscall_name">
- <enum>
- <label name="restart_syscall" value="0"/>
- <label name="exit" value="1"/>
- <label name="fork" value="2"/>
- <label name="read" value="3"/>
- <label name="write" value="4"/>
- <label name="open" value="5"/>
- <label name="close" value="6"/>
- <label name="waitpid" value="7"/>
- <label name="creat" value="8"/>
- <label name="link" value="9"/>
- <label name="unlink" value="10"/>
- <label name="execve" value="11"/>
- <label name="chdir" value="12"/>
- <label name="time" value="13"/>
- <label name="mknod" value="14"/>
- <label name="chmod" value="15"/>
- <label name="lchown" value="16"/>
- <label name="break" value="17"/>
- <label name="oldstat" value="18"/>
- <label name="lseek" value="19"/>
- <label name="getpid" value="20"/>
- <label name="mount" value="21"/>
- <label name="umount" value="22"/>
- <label name="setuid" value="23"/>
- <label name="getuid" value="24"/>
- <label name="stime" value="25"/>
- <label name="ptrace" value="26"/>
- <label name="alarm" value="27"/>
- <label name="oldfstat" value="28"/>
- <label name="pause" value="29"/>
- <label name="utime" value="30"/>
- <label name="stty" value="31"/>
- <label name="gtty" value="32"/>
- <label name="access" value="33"/>
- <label name="nice" value="34"/>
- <label name="ftime" value="35"/>
- <label name="sync" value="36"/>
- <label name="kill" value="37"/>
- <label name="rename" value="38"/>
- <label name="mkdir" value="39"/>
- <label name="rmdir" value="40"/>
- <label name="dup" value="41"/>
- <label name="pipe" value="42"/>
- <label name="times" value="43"/>
- <label name="prof" value="44"/>
- <label name="brk" value="45"/>
- <label name="setgid" value="46"/>
- <label name="getgid" value="47"/>
- <label name="signal" value="48"/>
- <label name="geteuid" value="49"/>
- <label name="getegid" value="50"/>
- <label name="acct" value="51"/>
- <label name="umount2" value="52"/>
- <label name="lock" value="53"/>
- <label name="ioctl" value="54"/>
- <label name="fcntl" value="55"/>
- <label name="mpx" value="56"/>
- <label name="setpgid" value="57"/>
- <label name="ulimit" value="58"/>
- <label name="oldolduname" value="59"/>
- <label name="umask" value="60"/>
- <label name="chroot" value="61"/>
- <label name="ustat" value="62"/>
- <label name="dup2" value="63"/>
- <label name="getppid" value="64"/>
- <label name="getpgrp" value="65"/>
- <label name="setsid" value="66"/>
- <label name="sigaction" value="67"/>
- <label name="sgetmask" value="68"/>
- <label name="ssetmask" value="69"/>
- <label name="setreuid" value="70"/>
- <label name="setregid" value="71"/>
- <label name="sigsuspend" value="72"/>
- <label name="sigpending" value="73"/>
- <label name="sethostname" value="74"/>
- <label name="setrlimit" value="75"/>
- <label name="getrlimit" value="76"/>
- <label name="getrusage" value="77"/>
- <label name="gettimeofday" value="78"/>
- <label name="settimeofday" value="79"/>
- <label name="getgroups" value="80"/>
- <label name="setgroups" value="81"/>
- <label name="select" value="82"/>
- <label name="symlink" value="83"/>
- <label name="oldlstat" value="84"/>
- <label name="readlink" value="85"/>
- <label name="uselib" value="86"/>
- <label name="swapon" value="87"/>
- <label name="reboot" value="88"/>
- <label name="readdir" value="89"/>
- <label name="mmap" value="90"/>
- <label name="munmap" value="91"/>
- <label name="truncate" value="92"/>
- <label name="ftruncate" value="93"/>
- <label name="fchmod" value="94"/>
- <label name="fchown" value="95"/>
- <label name="getpriority" value="96"/>
- <label name="setpriority" value="97"/>
- <label name="profil" value="98"/>
- <label name="statfs" value="99"/>
- <label name="fstatfs" value="100"/>
- <label name="ioperm" value="101"/>
- <label name="socketcall" value="102"/>
- <label name="syslog" value="103"/>
- <label name="setitimer" value="104"/>
- <label name="getitimer" value="105"/>
- <label name="stat" value="106"/>
- <label name="lstat" value="107"/>
- <label name="fstat" value="108"/>
- <label name="olduname" value="109"/>
- <label name="iopl" value="110"/>
- <label name="vhangup" value="111"/>
- <label name="idle" value="112"/>
- <label name="vm86old" value="113"/>
- <label name="wait4" value="114"/>
- <label name="swapoff" value="115"/>
- <label name="sysinfo" value="116"/>
- <label name="ipc" value="117"/>
- <label name="fsync" value="118"/>
- <label name="sigreturn" value="119"/>
- <label name="clone" value="120"/>
- <label name="setdomainname" value="121"/>
- <label name="uname" value="122"/>
- <label name="modify_ldt" value="123"/>
- <label name="adjtimex" value="124"/>
- <label name="mprotect" value="125"/>
- <label name="sigprocmask" value="126"/>
- <label name="create_module" value="127"/>
- <label name="init_module" value="128"/>
- <label name="delete_module" value="129"/>
- <label name="get_kernel_syms" value="130"/>
- <label name="quotactl" value="131"/>
- <label name="getpgid" value="132"/>
- <label name="fchdir" value="133"/>
- <label name="bdflush" value="134"/>
- <label name="sysfs" value="135"/>
- <label name="personality" value="136"/>
- <label name="afs_syscall" value="137"/>
- <label name="setfsuid" value="138"/>
- <label name="setfsgid" value="139"/>
- <label name="_llseek" value="140"/>
- <label name="getdents" value="141"/>
- <label name="_newselect" value="142"/>
- <label name="flock" value="143"/>
- <label name="msync" value="144"/>
- <label name="readv" value="145"/>
- <label name="writev" value="146"/>
- <label name="getsid" value="147"/>
- <label name="fdatasync" value="148"/>
- <label name="_sysctl" value="149"/>
- <label name="mlock" value="150"/>
- <label name="munlock" value="151"/>
- <label name="mlockall" value="152"/>
- <label name="munlockall" value="153"/>
- <label name="sched_setparam" value="154"/>
- <label name="sched_getparam" value="155"/>
- <label name="sched_setscheduler" value="156"/>
- <label name="sched_getscheduler" value="157"/>
- <label name="sched_yield" value="158"/>
- <label name="sched_get_priority_max" value="159"/>
- <label name="sched_get_priority_min" value="160"/>
- <label name="sched_rr_get_interval" value="161"/>
- <label name="nanosleep" value="162"/>
- <label name="mremap" value="163"/>
- <label name="setresuid" value="164"/>
- <label name="getresuid" value="165"/>
- <label name="vm86" value="166"/>
- <label name="query_module" value="167"/>
- <label name="poll" value="168"/>
- <label name="nfsservctl" value="169"/>
- <label name="setresgid" value="170"/>
- <label name="getresgid" value="171"/>
- <label name="prctl" value="172"/>
- <label name="rt_sigreturn" value="173"/>
- <label name="rt_sigaction" value="174"/>
- <label name="rt_sigprocmask" value="175"/>
- <label name="rt_sigpending" value="176"/>
- <label name="rt_sigtimedwait" value="177"/>
- <label name="rt_sigqueueinfo" value="178"/>
- <label name="rt_sigsuspend" value="179"/>
- <label name="pread64" value="180"/>
- <label name="pwrite64" value="181"/>
- <label name="chown" value="182"/>
- <label name="getcwd" value="183"/>
- <label name="capget" value="184"/>
- <label name="capset" value="185"/>
- <label name="sigaltstack" value="186"/>
- <label name="sendfile" value="187"/>
- <label name="reserved1" value="188"/>
- <label name="reserved2" value="189"/>
- <label name="vfork" value="190"/>
- <label name="ugetrlimit" value="191"/>
- <label name="mmap2" value="192"/>
- <label name="truncate64" value="193"/>
- <label name="ftruncate64" value="194"/>
- <label name="stat64" value="195"/>
- <label name="lstat64" value="196"/>
- <label name="fstat64" value="197"/>
- <label name="lchown32" value="198"/>
- <label name="getuid32" value="199"/>
- <label name="getgid32" value="200"/>
- <label name="geteuid32" value="201"/>
- <label name="getegid32" value="202"/>
- <label name="setreuid32" value="203"/>
- <label name="setregid32" value="204"/>
- <label name="getgroups32" value="205"/>
- <label name="setgroups32" value="206"/>
- <label name="fchown32" value="207"/>
- <label name="setresuid32" value="208"/>
- <label name="getresuid32" value="209"/>
- <label name="setresgid32" value="210"/>
- <label name="getresgid32" value="211"/>
- <label name="chown32" value="212"/>
- <label name="setuid32" value="213"/>
- <label name="setgid32" value="214"/>
- <label name="setfsuid32" value="215"/>
- <label name="setfsgid32" value="216"/>
- <label name="getdents64" value="217"/>
- <label name="pivot_root" value="218"/>
- <label name="mincore" value="219"/>
- <label name="madvise" value="220"/>
- <label name="fcntl64" value="221"/>
- <label name="tux" value="222"/>
- <label name="unsued" value="223"/>
- <label name="gettid" value="224"/>
- <label name="readahead" value="225"/>
- <label name="setxattr" value="226"/>
- <label name="lsetxattr" value="227"/>
- <label name="fsetxattr" value="228"/>
- <label name="getxattr" value="229"/>
- <label name="lgetxattr" value="230"/>
- <label name="fgetxattr" value="231"/>
- <label name="listxattr" value="232"/>
- <label name="llistxattr" value="233"/>
- <label name="flistxattr" value="234"/>
- <label name="removexattr" value="235"/>
- <label name="lremovexattr" value="236"/>
- <label name="fremovexattr" value="237"/>
- <label name="tkill" value="238"/>
- <label name="sendfile64" value="239"/>
- <label name="futex" value="240"/>
- <label name="sched_setaffinity" value="241"/>
- <label name="sched_getaffinity" value="242"/>
- <label name="io_setup" value="243"/>
- <label name="io_destroy" value="244"/>
- <label name="io_getevents" value="245"/>
- <label name="io_submit" value="246"/>
- <label name="io_cancel" value="247"/>
- <label name="exit_group" value="248"/>
- <label name="lookup_dcookie" value="249"/>
- <label name="epoll_create" value="250"/>
- <label name="epoll_ctl" value="251"/>
- <label name="epoll_wait" value="252"/>
- <label name="remap_file_pages" value="253"/>
- <label name="set_thread_area" value="254"/>
- <label name="get_thread_area" value="255"/>
- <label name="set_tid_address" value="256"/>
- <label name="timer_create" value="257"/>
- <label name="timer_settime" value="258"/>
- <label name="timer_gettime" value="259"/>
- <label name="timer_getoverrun" value="260"/>
- <label name="timer_delete" value="261"/>
- <label name="clock_settime" value="262"/>
- <label name="clock_gettime" value="263"/>
- <label name="clock_getres" value="264"/>
- <label name="clock_nanosleep" value="265"/>
- <label name="statfs64" value="266"/>
- <label name="fstatfs64" value="267"/>
- <label name="tgkill" value="268"/>
- <label name="utimes" value="269"/>
- <label name="arm_fadvise64_64" value="270"/>
- <label name="pciconfig_iobase" value="271"/>
- <label name="pciconfig_read" value="272"/>
- <label name="pciconfig_write" value="273"/>
- <label name="mq_open" value="274"/>
- <label name="mq_unlink" value="275"/>
- <label name="mq_timedsend" value="276"/>
- <label name="mq_timedreceive" value="277"/>
- <label name="mq_notify" value="278"/>
- <label name="mq_getsetattr" value="279"/>
- <label name="waitid" value="280"/>
-
- <label name="add_key" value="309"/>
- <label name="request_key" value="310"/>
- <label name="keyctl" value="311"/>
-
- <label name="vserver" value="313"/>
- <label name="ioprio_set" value="314"/>
- <label name="ioprio_get" value="315"/>
- <label name="inotify_init" value="316"/>
- <label name="inotify_add_watch" value="317"/>
- <label name="inotify_rm_watch" value="318"/>
- <label name="mbind" value="319"/>
- <label name="get_mempolicy" value="320"/>
- <label name="set_mempolicy" value="321"/>
- <label name="arm_syscall_offset" value="1024"/>
- <label name="breakpoint" value="1025"/>
- <label name="cacheflush" value="1026"/>
- <label name="usr26" value="1027"/>
- <label name="usr32" value="1028"/>
- <label name="set_tls" value="1029"/>
- </enum>
- </type>
-
- <event name="syscall_entry">
- <description>System call entry</description>
- <field name="syscall_id"> <description>Syscall entry number in entry.S</description> <typeref name="syscall_name"/> </field>
- <field name="address"> <description>Address from which call was made</description> <pointer/> </field>
- </event>
-
- <event name="syscall_exit">
- <description>System call exit</description>
- </event>
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="kernel_arch" arch="c2">
- <description>The kernel facility has events related to kernel execution status
- for the MIPS architecture.</description>
- <type name="syscall_name">
- <enum>
- <label name="o32_base" value="3999"/><description>Linux o32 style syscalls</description>
- <label name="o32_syscall" value="4000"/>
- <label name="o32_exit" value="4001"/>
- <label name="o32_fork" value="4002"/>
- <label name="o32_read" value="4003"/>
- <label name="o32_write" value="4004"/>
- <label name="o32_open" value="4005"/>
- <label name="o32_close" value="4006"/>
- <label name="o32_waitpid" value="4007"/>
- <label name="o32_creat" value="4008"/>
- <label name="o32_link" value="4009"/>
- <label name="o32_unlink" value="4010"/>
- <label name="o32_execve" value="4011"/>
- <label name="o32_chdir" value="4012"/>
- <label name="o32_time" value="4013"/>
- <label name="o32_mknod" value="4014"/>
- <label name="o32_chmod" value="4015"/>
- <label name="o32_lchown" value="4016"/>
- <label name="o32_break" value="4017"/>
- <label name="o32_unused18" value="4018"/>
- <label name="o32_lseek" value="4019"/>
- <label name="o32_getpid" value="4020"/>
- <label name="o32_mount" value="4021"/>
- <label name="o32_umount" value="4022"/>
- <label name="o32_setuid" value="4023"/>
- <label name="o32_getuid" value="4024"/>
- <label name="o32_stime" value="4025"/>
- <label name="o32_ptrace" value="4026"/>
- <label name="o32_alarm" value="4027"/>
- <label name="o32_unused28" value="4028"/>
- <label name="o32_pause" value="4029"/>
- <label name="o32_utime" value="4030"/>
- <label name="o32_stty" value="4031"/>
- <label name="o32_gtty" value="4032"/>
- <label name="o32_access" value="4033"/>
- <label name="o32_nice" value="4034"/>
- <label name="o32_ftime" value="4035"/>
- <label name="o32_sync" value="4036"/>
- <label name="o32_kill" value="4037"/>
- <label name="o32_rename" value="4038"/>
- <label name="o32_mkdir" value="4039"/>
- <label name="o32_rmdir" value="4040"/>
- <label name="o32_dup" value="4041"/>
- <label name="o32_pipe" value="4042"/>
- <label name="o32_times" value="4043"/>
- <label name="o32_prof" value="4044"/>
- <label name="o32_brk" value="4045"/>
- <label name="o32_setgid" value="4046"/>
- <label name="o32_getgid" value="4047"/>
- <label name="o32_signal" value="4048"/>
- <label name="o32_geteuid" value="4049"/>
- <label name="o32_getegid" value="4050"/>
- <label name="o32_acct" value="4051"/>
- <label name="o32_umount2" value="4052"/>
- <label name="o32_lock" value="4053"/>
- <label name="o32_ioctl" value="4054"/>
- <label name="o32_fcntl" value="4055"/>
- <label name="o32_mpx" value="4056"/>
- <label name="o32_setpgid" value="4057"/>
- <label name="o32_ulimit" value="4058"/>
- <label name="o32_unused59" value="4059"/>
- <label name="o32_umask" value="4060"/>
- <label name="o32_chroot" value="4061"/>
- <label name="o32_ustat" value="4062"/>
- <label name="o32_dup2" value="4063"/>
- <label name="o32_getppid" value="4064"/>
- <label name="o32_getpgrp" value="4065"/>
- <label name="o32_setsid" value="4066"/>
- <label name="o32_sigaction" value="4067"/>
- <label name="o32_sgetmask" value="4068"/>
- <label name="o32_ssetmask" value="4069"/>
- <label name="o32_setreuid" value="4070"/>
- <label name="o32_setregid" value="4071"/>
- <label name="o32_sigsuspend" value="4072"/>
- <label name="o32_sigpending" value="4073"/>
- <label name="o32_sethostname" value="4074"/>
- <label name="o32_setrlimit" value="4075"/>
- <label name="o32_getrlimit" value="4076"/>
- <label name="o32_getrusage" value="4077"/>
- <label name="o32_gettimeofday" value="4078"/>
- <label name="o32_settimeofday" value="4079"/>
- <label name="o32_getgroups" value="4080"/>
- <label name="o32_setgroups" value="4081"/>
- <label name="o32_reserved82" value="4082"/>
- <label name="o32_symlink" value="4083"/>
- <label name="o32_unused84" value="4084"/>
- <label name="o32_readlink" value="4085"/>
- <label name="o32_uselib" value="4086"/>
- <label name="o32_swapon" value="4087"/>
- <label name="o32_reboot" value="4088"/>
- <label name="o32_readdir" value="4089"/>
- <label name="o32_mmap" value="4090"/>
- <label name="o32_munmap" value="4091"/>
- <label name="o32_truncate" value="4092"/>
- <label name="o32_ftruncate" value="4093"/>
- <label name="o32_fchmod" value="4094"/>
- <label name="o32_fchown" value="4095"/>
- <label name="o32_getpriority" value="4096"/>
- <label name="o32_setpriority" value="4097"/>
- <label name="o32_profil" value="4098"/>
- <label name="o32_statfs" value="4099"/>
- <label name="o32_fstatfs" value="4100"/>
- <label name="o32_ioperm" value="4101"/>
- <label name="o32_socketcall" value="4102"/>
- <label name="o32_syslog" value="4103"/>
- <label name="o32_setitimer" value="4104"/>
- <label name="o32_getitimer" value="4105"/>
- <label name="o32_stat" value="4106"/>
- <label name="o32_lstat" value="4107"/>
- <label name="o32_fstat" value="4108"/>
- <label name="o32_unused109" value="4109"/>
- <label name="o32_iopl" value="4110"/>
- <label name="o32_vhangup" value="4111"/>
- <label name="o32_idle" value="4112"/>
- <label name="o32_vm86" value="4113"/>
- <label name="o32_wait4" value="4114"/>
- <label name="o32_swapoff" value="4115"/>
- <label name="o32_sysinfo" value="4116"/>
- <label name="o32_ipc" value="4117"/>
- <label name="o32_fsync" value="4118"/>
- <label name="o32_sigreturn" value="4119"/>
- <label name="o32_clone" value="4120"/>
- <label name="o32_setdomainname" value="4121"/>
- <label name="o32_uname" value="4122"/>
- <label name="o32_modify_ldt" value="4123"/>
- <label name="o32_adjtimex" value="4124"/>
- <label name="o32_mprotect" value="4125"/>
- <label name="o32_sigprocmask" value="4126"/>
- <label name="o32_create_module" value="4127"/>
- <label name="o32_init_module" value="4128"/>
- <label name="o32_delete_module" value="4129"/>
- <label name="o32_get_kernel_syms" value="4130"/>
- <label name="o32_quotactl" value="4131"/>
- <label name="o32_getpgid" value="4132"/>
- <label name="o32_fchdir" value="4133"/>
- <label name="o32_bdflush" value="4134"/>
- <label name="o32_sysfs" value="4135"/>
- <label name="o32_personality" value="4136"/>
- <label name="o32_afs_syscall" value="4137"/>
- <label name="o32_setfsuid" value="4138"/>
- <label name="o32_setfsgid" value="4139"/>
- <label name="o32__llseek" value="4140"/>
- <label name="o32_getdents" value="4141"/>
- <label name="o32__newselect" value="4142"/>
- <label name="o32_flock" value="4143"/>
- <label name="o32_msync" value="4144"/>
- <label name="o32_readv" value="4145"/>
- <label name="o32_writev" value="4146"/>
- <label name="o32_cacheflush" value="4147"/>
- <label name="o32_cachectl" value="4148"/>
- <label name="o32_sysmips" value="4149"/>
- <label name="o32_unused150" value="4150"/>
- <label name="o32_getsid" value="4151"/>
- <label name="o32_fdatasync" value="4152"/>
- <label name="o32__sysctl" value="4153"/>
- <label name="o32_mlock" value="4154"/>
- <label name="o32_munlock" value="4155"/>
- <label name="o32_mlockall" value="4156"/>
- <label name="o32_munlockall" value="4157"/>
- <label name="o32_sched_setparam" value="4158"/>
- <label name="o32_sched_getparam" value="4159"/>
- <label name="o32_sched_setscheduler" value="4160"/>
- <label name="o32_sched_getscheduler" value="4161"/>
- <label name="o32_sched_yield" value="4162"/>
- <label name="o32_sched_get_priority_max" value="4163"/>
- <label name="o32_sched_get_priority_min" value="4164"/>
- <label name="o32_sched_rr_get_interval" value="4165"/>
- <label name="o32_nanosleep" value="4166"/>
- <label name="o32_mremap" value="4167"/>
- <label name="o32_accept" value="4168"/>
- <label name="o32_bind" value="4169"/>
- <label name="o32_connect" value="4170"/>
- <label name="o32_getpeername" value="4171"/>
- <label name="o32_getsockname" value="4172"/>
- <label name="o32_getsockopt" value="4173"/>
- <label name="o32_listen" value="4174"/>
- <label name="o32_recv" value="4175"/>
- <label name="o32_recvfrom" value="4176"/>
- <label name="o32_recvmsg" value="4177"/>
- <label name="o32_send" value="4178"/>
- <label name="o32_sendmsg" value="4179"/>
- <label name="o32_sendto" value="4180"/>
- <label name="o32_setsockopt" value="4181"/>
- <label name="o32_shutdown" value="4182"/>
- <label name="o32_socket" value="4183"/>
- <label name="o32_socketpair" value="4184"/>
- <label name="o32_setresuid" value="4185"/>
- <label name="o32_getresuid" value="4186"/>
- <label name="o32_query_module" value="4187"/>
- <label name="o32_poll" value="4188"/>
- <label name="o32_nfsservctl" value="4189"/>
- <label name="o32_setresgid" value="4190"/>
- <label name="o32_getresgid" value="4191"/>
- <label name="o32_prctl" value="4192"/>
- <label name="o32_rt_sigreturn" value="4193"/>
- <label name="o32_rt_sigaction" value="4194"/>
- <label name="o32_rt_sigprocmask" value="4195"/>
- <label name="o32_rt_sigpending" value="4196"/>
- <label name="o32_rt_sigtimedwait" value="4197"/>
- <label name="o32_rt_sigqueueinfo" value="4198"/>
- <label name="o32_rt_sigsuspend" value="4199"/>
- <label name="o32_pread64" value="4200"/>
- <label name="o32_pwrite64" value="4201"/>
- <label name="o32_chown" value="4202"/>
- <label name="o32_getcwd" value="4203"/>
- <label name="o32_capget" value="4204"/>
- <label name="o32_capset" value="4205"/>
- <label name="o32_sigaltstack" value="4206"/>
- <label name="o32_sendfile" value="4207"/>
- <label name="o32_getpmsg" value="4208"/>
- <label name="o32_putpmsg" value="4209"/>
- <label name="o32_mmap2" value="4210"/>
- <label name="o32_truncate64" value="4211"/>
- <label name="o32_ftruncate64" value="4212"/>
- <label name="o32_stat64" value="4213"/>
- <label name="o32_lstat64" value="4214"/>
- <label name="o32_fstat64" value="4215"/>
- <label name="o32_pivot_root" value="4216"/>
- <label name="o32_mincore" value="4217"/>
- <label name="o32_madvise" value="4218"/>
- <label name="o32_getdents64" value="4219"/>
- <label name="o32_fcntl64" value="4220"/>
- <label name="o32_reserved221" value="4221"/>
- <label name="o32_gettid" value="4222"/>
- <label name="o32_readahead" value="4223"/>
- <label name="o32_setxattr" value="4224"/>
- <label name="o32_lsetxattr" value="4225"/>
- <label name="o32_fsetxattr" value="4226"/>
- <label name="o32_getxattr" value="4227"/>
- <label name="o32_lgetxattr" value="4228"/>
- <label name="o32_fgetxattr" value="4229"/>
- <label name="o32_listxattr" value="4230"/>
- <label name="o32_llistxattr" value="4231"/>
- <label name="o32_flistxattr" value="4232"/>
- <label name="o32_removexattr" value="4233"/>
- <label name="o32_lremovexattr" value="4234"/>
- <label name="o32_fremovexattr" value="4235"/>
- <label name="o32_tkill" value="4236"/>
- <label name="o32_sendfile64" value="4237"/>
- <label name="o32_futex" value="4238"/>
- <label name="o32_sched_setaffinity" value="4239"/>
- <label name="o32_sched_getaffinity" value="4240"/>
- <label name="o32_io_setup" value="4241"/>
- <label name="o32_io_destroy" value="4242"/>
- <label name="o32_io_getevents" value="4243"/>
- <label name="o32_io_submit" value="4244"/>
- <label name="o32_io_cancel" value="4245"/>
- <label name="o32_exit_group" value="4246"/>
- <label name="o32_lookup_dcookie" value="4247"/>
- <label name="o32_epoll_create" value="4248"/>
- <label name="o32_epoll_ctl" value="4249"/>
- <label name="o32_epoll_wait" value="4250"/>
- <label name="o32_remap_file_pages" value="4251"/>
- <label name="o32_set_tid_address" value="4252"/>
- <label name="o32_restart_syscall" value="4253"/>
- <label name="o32_fadvise64" value="4254"/>
- <label name="o32_statfs64" value="4255"/>
- <label name="o32_fstatfs64" value="4256"/>
- <label name="o32_timer_create" value="4257"/>
- <label name="o32_timer_settime" value="4258"/>
- <label name="o32_timer_gettime" value="4259"/>
- <label name="o32_timer_getoverrun" value="4260"/>
- <label name="o32_timer_delete" value="4261"/>
- <label name="o32_clock_settime" value="4262"/>
- <label name="o32_clock_gettime" value="4263"/>
- <label name="o32_clock_getres" value="4264"/>
- <label name="o32_clock_nanosleep" value="4265"/>
- <label name="o32_tgkill" value="4266"/>
- <label name="o32_utimes" value="4267"/>
- <label name="o32_mbind" value="4268"/>
- <label name="o32_get_mempolicy" value="4269"/>
- <label name="o32_set_mempolicy" value="4270"/>
- <label name="o32_mq_open" value="4271"/>
- <label name="o32_mq_unlink" value="4272"/>
- <label name="o32_mq_timedsend" value="4273"/>
- <label name="o32_mq_timedreceive" value="4274"/>
- <label name="o32_mq_notify" value="4275"/>
- <label name="o32_mq_getsetattr" value="4276"/>
- <label name="o32_vserver" value="4277"/>
- <label name="o32_waitid" value="4278"/>
-
- <label name="o32_add_key" value="4280"/>
- <label name="o32_request_key" value="4281"/>
- <label name="o32_keyctl" value="4282"/>
- <label name="o32_set_thread_area" value="4283"/>
- <label name="o32_inotify_init" value="4284"/>
- <label name="o32_inotify_add_watch" value="4285"/>
- <label name="o32_inotify_rm_watch" value="4286"/>
- <label name="o32_migrate_pages" value="4287"/>
- <label name="o32_openat" value="4288"/>
- <label name="o32_mkdirat" value="4289"/>
- <label name="o32_mknodat" value="4290"/>
- <label name="o32_fchownat" value="4291"/>
- <label name="o32_futimesat" value="4292"/>
- <label name="o32_fstatat64" value="4293"/>
- <label name="o32_unlinkat" value="4294"/>
- <label name="o32_renameat" value="4295"/>
- <label name="o32_linkat" value="4296"/>
- <label name="o32_symlinkat" value="4297"/>
- <label name="o32_readlinkat" value="4298"/>
- <label name="o32_fchmodat" value="4299"/>
- <label name="o32_faccessat" value="4300"/>
- <label name="o32_pselect6" value="4301"/>
- <label name="o32_ppoll" value="4302"/>
- <label name="o32_unshare" value="4303"/>
- <label name="o32_set_robust_list" value="4304"/>
- <label name="o32_get_robust_list" value="4305"/>
- <label name="o32_splice" value="4306"/>
- <label name="o32_sync_file_range" value="4307"/>
- <label name="o32_tee" value="4308"/>
- <label name="o32_vmsplice" value="4309"/>
-
- <label name="N32_base" value="5999"/>
- <label name="N32_read" value="6000"/>
- <label name="N32_write" value="6001"/>
- <label name="N32_open" value="6002"/>
- <label name="N32_close" value="6003"/>
- <label name="N32_stat" value="6004"/>
- <label name="N32_fstat" value="6005"/>
- <label name="N32_lstat" value="6006"/>
- <label name="N32_poll" value="6007"/>
- <label name="N32_lseek" value="6008"/>
- <label name="N32_mmap" value="6009"/>
- <label name="N32_mprotect" value="6010"/>
- <label name="N32_munmap" value="6011"/>
- <label name="N32_brk" value="6012"/>
- <label name="N32_rt_sigaction" value="6013"/>
- <label name="N32_rt_sigprocmask" value="6014"/>
- <label name="N32_ioctl" value="6015"/>
- <label name="N32_pread64" value="6016"/>
- <label name="N32_pwrite64" value="6017"/>
- <label name="N32_readv" value="6018"/>
- <label name="N32_writev" value="6019"/>
- <label name="N32_access" value="6020"/>
- <label name="N32_pipe" value="6021"/>
- <label name="N32__newselect" value="6022"/>
- <label name="N32_sched_yield" value="6023"/>
- <label name="N32_mremap" value="6024"/>
- <label name="N32_msync" value="6025"/>
- <label name="N32_mincore" value="6026"/>
- <label name="N32_madvise" value="6027"/>
- <label name="N32_shmget" value="6028"/>
- <label name="N32_shmat" value="6029"/>
- <label name="N32_shmctl" value="6030"/>
- <label name="N32_dup" value="6031"/>
- <label name="N32_dup2" value="6032"/>
- <label name="N32_pause" value="6033"/>
- <label name="N32_nanosleep" value="6034"/>
- <label name="N32_getitimer" value="6035"/>
- <label name="N32_setitimer" value="6036"/>
- <label name="N32_alarm" value="6037"/>
- <label name="N32_getpid" value="6038"/>
- <label name="N32_sendfile" value="6039"/>
- <label name="N32_socket" value="6040"/>
- <label name="N32_connect" value="6041"/>
- <label name="N32_accept" value="6042"/>
- <label name="N32_sendto" value="6043"/>
- <label name="N32_recvfrom" value="6044"/>
- <label name="N32_sendmsg" value="6045"/>
- <label name="N32_recvmsg" value="6046"/>
- <label name="N32_shutdown" value="6047"/>
- <label name="N32_bind" value="6048"/>
- <label name="N32_listen" value="6049"/>
- <label name="N32_getsockname" value="6050"/>
- <label name="N32_getpeername" value="6051"/>
- <label name="N32_socketpair" value="6052"/>
- <label name="N32_setsockopt" value="6053"/>
- <label name="N32_getsockopt" value="6054"/>
- <label name="N32_clone" value="6055"/>
- <label name="N32_fork" value="6056"/>
- <label name="N32_execve" value="6057"/>
- <label name="N32_exit" value="6058"/>
- <label name="N32_wait4" value="6059"/>
- <label name="N32_kill" value="6060"/>
- <label name="N32_uname" value="6061"/>
- <label name="N32_semget" value="6062"/>
- <label name="N32_semop" value="6063"/>
- <label name="N32_semctl" value="6064"/>
- <label name="N32_shmdt" value="6065"/>
- <label name="N32_msgget" value="6066"/>
- <label name="N32_msgsnd" value="6067"/>
- <label name="N32_msgrcv" value="6068"/>
- <label name="N32_msgctl" value="6069"/>
- <label name="N32_fcntl" value="6070"/>
- <label name="N32_flock" value="6071"/>
- <label name="N32_fsync" value="6072"/>
- <label name="N32_fdatasync" value="6073"/>
- <label name="N32_truncate" value="6074"/>
- <label name="N32_ftruncate" value="6075"/>
- <label name="N32_getdents" value="6076"/>
- <label name="N32_getcwd" value="6077"/>
- <label name="N32_chdir" value="6078"/>
- <label name="N32_fchdir" value="6079"/>
- <label name="N32_rename" value="6080"/>
- <label name="N32_mkdir" value="6081"/>
- <label name="N32_rmdir" value="6082"/>
- <label name="N32_creat" value="6083"/>
- <label name="N32_link" value="6084"/>
- <label name="N32_unlink" value="6085"/>
- <label name="N32_symlink" value="6086"/>
- <label name="N32_readlink" value="6087"/>
- <label name="N32_chmod" value="6088"/>
- <label name="N32_fchmod" value="6089"/>
- <label name="N32_chown" value="6090"/>
- <label name="N32_fchown" value="6091"/>
- <label name="N32_lchown" value="6092"/>
- <label name="N32_umask" value="6093"/>
- <label name="N32_gettimeofday" value="6094"/>
- <label name="N32_getrlimit" value="6095"/>
- <label name="N32_getrusage" value="6096"/>
- <label name="N32_sysinfo" value="6097"/>
- <label name="N32_times" value="6098"/>
- <label name="N32_ptrace" value="6099"/>
- <label name="N32_getuid" value="6100"/>
- <label name="N32_syslog" value="6101"/>
- <label name="N32_getgid" value="6102"/>
- <label name="N32_setuid" value="6103"/>
- <label name="N32_setgid" value="6104"/>
- <label name="N32_geteuid" value="6105"/>
- <label name="N32_getegid" value="6106"/>
- <label name="N32_setpgid" value="6107"/>
- <label name="N32_getppid" value="6108"/>
- <label name="N32_getpgrp" value="6109"/>
- <label name="N32_setsid" value="6110"/>
- <label name="N32_setreuid" value="6111"/>
- <label name="N32_setregid" value="6112"/>
- <label name="N32_getgroups" value="6113"/>
- <label name="N32_setgroups" value="6114"/>
- <label name="N32_setresuid" value="6115"/>
- <label name="N32_getresuid" value="6116"/>
- <label name="N32_setresgid" value="6117"/>
- <label name="N32_getresgid" value="6118"/>
- <label name="N32_getpgid" value="6119"/>
- <label name="N32_setfsuid" value="6120"/>
- <label name="N32_setfsgid" value="6121"/>
- <label name="N32_getsid" value="6122"/>
- <label name="N32_capget" value="6123"/>
- <label name="N32_capset" value="6124"/>
- <label name="N32_rt_sigpending" value="6125"/>
- <label name="N32_rt_sigtimedwait" value="6126"/>
- <label name="N32_rt_sigqueueinfo" value="6127"/>
- <label name="N32_rt_sigsuspend" value="6128"/>
- <label name="N32_sigaltstack" value="6129"/>
- <label name="N32_utime" value="6130"/>
- <label name="N32_mknod" value="6131"/>
- <label name="N32_personality" value="6132"/>
- <label name="N32_ustat" value="6133"/>
- <label name="N32_statfs" value="6134"/>
- <label name="N32_fstatfs" value="6135"/>
- <label name="N32_sysfs" value="6136"/>
- <label name="N32_getpriority" value="6137"/>
- <label name="N32_setpriority" value="6138"/>
- <label name="N32_sched_setparam" value="6139"/>
- <label name="N32_sched_getparam" value="6140"/>
- <label name="N32_sched_setscheduler" value="6141"/>
- <label name="N32_sched_getscheduler" value="6142"/>
- <label name="N32_sched_get_priority_max" value="6143"/>
- <label name="N32_sched_get_priority_min" value="6144"/>
- <label name="N32_sched_rr_get_interval" value="6145"/>
- <label name="N32_mlock" value="6146"/>
- <label name="N32_munlock" value="6147"/>
- <label name="N32_mlockall" value="6148"/>
- <label name="N32_munlockall" value="6149"/>
- <label name="N32_vhangup" value="6150"/>
- <label name="N32_pivot_root" value="6151"/>
- <label name="N32__sysctl" value="6152"/>
- <label name="N32_prctl" value="6153"/>
- <label name="N32_adjtimex" value="6154"/>
- <label name="N32_setrlimit" value="6155"/>
- <label name="N32_chroot" value="6156"/>
- <label name="N32_sync" value="6157"/>
- <label name="N32_acct" value="6158"/>
- <label name="N32_settimeofday" value="6159"/>
- <label name="N32_mount" value="6160"/>
- <label name="N32_umount2" value="6161"/>
- <label name="N32_swapon" value="6162"/>
- <label name="N32_swapoff" value="6163"/>
- <label name="N32_reboot" value="6164"/>
- <label name="N32_sethostname" value="6165"/>
- <label name="N32_setdomainname" value="6166"/>
- <label name="N32_create_module" value="6167"/>
- <label name="N32_init_module" value="6168"/>
- <label name="N32_delete_module" value="6169"/>
- <label name="N32_get_kernel_syms" value="6170"/>
- <label name="N32_query_module" value="6171"/>
- <label name="N32_quotactl" value="6172"/>
- <label name="N32_nfsservctl" value="6173"/>
- <label name="N32_getpmsg" value="6174"/>
- <label name="N32_putpmsg" value="6175"/>
- <label name="N32_afs_syscall" value="6176"/>
- <label name="N32_reserved177" value="6177"/>
- <label name="N32_gettid" value="6178"/>
- <label name="N32_readahead" value="6179"/>
- <label name="N32_setxattr" value="6180"/>
- <label name="N32_lsetxattr" value="6181"/>
- <label name="N32_fsetxattr" value="6182"/>
- <label name="N32_getxattr" value="6183"/>
- <label name="N32_lgetxattr" value="6184"/>
- <label name="N32_fgetxattr" value="6185"/>
- <label name="N32_listxattr" value="6186"/>
- <label name="N32_llistxattr" value="6187"/>
- <label name="N32_flistxattr" value="6188"/>
- <label name="N32_removexattr" value="6189"/>
- <label name="N32_lremovexattr" value="6190"/>
- <label name="N32_fremovexattr" value="6191"/>
- <label name="N32_tkill" value="6192"/>
- <label name="N32_reserved193" value="6193"/>
- <label name="N32_futex" value="6194"/>
- <label name="N32_sched_setaffinity" value="6195"/>
- <label name="N32_sched_getaffinity" value="6196"/>
- <label name="N32_cacheflush" value="6197"/>
- <label name="N32_cachectl" value="6198"/>
- <label name="N32_sysmips" value="6199"/>
- <label name="N32_io_setup" value="6200"/>
- <label name="N32_io_destroy" value="6201"/>
- <label name="N32_io_getevents" value="6202"/>
- <label name="N32_io_submit" value="6203"/>
- <label name="N32_io_cancel" value="6204"/>
- <label name="N32_exit_group" value="6205"/>
- <label name="N32_lookup_dcookie" value="6206"/>
- <label name="N32_epoll_create" value="6207"/>
- <label name="N32_epoll_ctl" value="6208"/>
- <label name="N32_epoll_wait" value="6209"/>
- <label name="N32_remap_file_pages" value="6210"/>
- <label name="N32_rt_sigreturn" value="6211"/>
- <label name="N32_fcntl64" value="6212"/>
- <label name="N32_set_tid_address" value="6213"/>
- <label name="N32_restart_syscall" value="6214"/>
- <label name="N32_semtimedop" value="6215"/>
- <label name="N32_fadvise64" value="6216"/>
- <label name="N32_statfs64" value="6217"/>
- <label name="N32_fstatfs64" value="6218"/>
- <label name="N32_sendfile64" value="6219"/>
- <label name="N32_timer_create" value="6220"/>
- <label name="N32_timer_settime" value="6221"/>
- <label name="N32_timer_gettime" value="6222"/>
- <label name="N32_timer_getoverrun" value="6223"/>
- <label name="N32_timer_delete" value="6224"/>
- <label name="N32_clock_settime" value="6225"/>
- <label name="N32_clock_gettime" value="6226"/>
- <label name="N32_clock_getres" value="6227"/>
- <label name="N32_clock_nanosleep" value="6228"/>
- <label name="N32_tgkill" value="6229"/>
- <label name="N32_utimes" value="6230"/>
- <label name="N32_mbind" value="6231"/>
- <label name="N32_get_mempolicy" value="6232"/>
- <label name="N32_set_mempolicy" value="6233"/>
- <label name="N32_mq_open" value="6234"/>
- <label name="N32_mq_unlink" value="6235"/>
- <label name="N32_mq_timedsend" value="6236"/>
- <label name="N32_mq_timedreceive" value="6237"/>
- <label name="N32_mq_notify" value="6238"/>
- <label name="N32_mq_getsetattr" value="6239"/>
- <label name="N32_vserver" value="6240"/>
- <label name="N32_waitid" value="6241"/>
-
- <label name="N32_add_key" value="6243"/>
- <label name="N32_request_key" value="6244"/>
- <label name="N32_keyctl" value="6245"/>
- <label name="N32_set_thread_area" value="6246"/>
- <label name="N32_inotify_init" value="6247"/>
- <label name="N32_inotify_add_watch" value="6248"/>
- <label name="N32_inotify_rm_watch" value="6249"/>
- <label name="N32_migrate_pages" value="6250"/>
- <label name="N32_openat" value="6251"/>
- <label name="N32_mkdirat" value="6252"/>
- <label name="N32_mknodat" value="6253"/>
- <label name="N32_fchownat" value="6254"/>
- <label name="N32_futimesat" value="6255"/>
- <label name="N32_fstatat64" value="6256"/>
- <label name="N32_unlinkat" value="6257"/>
- <label name="N32_renameat" value="6258"/>
- <label name="N32_linkat" value="6259"/>
- <label name="N32_symlinkat" value="6260"/>
- <label name="N32_readlinkat" value="6261"/>
- <label name="N32_fchmodat" value="6262"/>
- <label name="N32_faccessat" value="6263"/>
- <label name="N32_pselect6" value="6264"/>
- <label name="N32_ppoll" value="6265"/>
- <label name="N32_unshare" value="6266"/>
- <label name="N32_set_robust_list" value="6267"/>
- <label name="N32_get_robust_list" value="6268"/>
- <label name="N32_splice" value="6269"/>
- <label name="N32_sync_file_range" value="6270"/>
- <label name="N32_tee" value="6271"/>
- <label name="N32_vmsplice" value="6272"/>
- </enum>
- </type>
-
- <event name="syscall_entry">
- <description>System call entry</description>
- <field name="syscall_id"> <description>Syscall entry number in entry.S</description>
- <typeref name="syscall_name"/> </field>
- <field name="address"> <description>Address from which call was made</description> <pointer/> </field>
- </event>
-
- <event name="syscall_exit">
- <description>System call exit</description>
- </event>
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="kernel_arch" arch="i386">
- <description>The kernel facility has events related to kernel execution status for the i386 architecture.</description>
- <type name="syscall_name">
- <enum>
- <label name="restart_syscall" value="0"/>
- <label name="exit" value="1"/>
- <label name="fork" value="2"/>
- <label name="read" value="3"/>
- <label name="write" value="4"/>
- <label name="open" value="5"/>
- <label name="close" value="6"/>
- <label name="waitpid" value="7"/>
- <label name="creat" value="8"/>
- <label name="link" value="9"/>
- <label name="unlink" value="10"/>
- <label name="execve" value="11"/>
- <label name="chdir" value="12"/>
- <label name="time" value="13"/>
- <label name="mknod" value="14"/>
- <label name="chmod" value="15"/>
- <label name="lchown" value="16"/>
- <label name="break" value="17"/>
- <label name="oldstat" value="18"/>
- <label name="lseek" value="19"/>
- <label name="getpid" value="20"/>
- <label name="mount" value="21"/>
- <label name="umount" value="22"/>
- <label name="setuid" value="23"/>
- <label name="getuid" value="24"/>
- <label name="stime" value="25"/>
- <label name="ptrace" value="26"/>
- <label name="alarm" value="27"/>
- <label name="oldfstat" value="28"/>
- <label name="pause" value="29"/>
- <label name="utime" value="30"/>
- <label name="stty" value="31"/>
- <label name="gtty" value="32"/>
- <label name="access" value="33"/>
- <label name="nice" value="34"/>
- <label name="ftime" value="35"/>
- <label name="sync" value="36"/>
- <label name="kill" value="37"/>
- <label name="rename" value="38"/>
- <label name="mkdir" value="39"/>
- <label name="rmdir" value="40"/>
- <label name="dup" value="41"/>
- <label name="pipe" value="42"/>
- <label name="times" value="43"/>
- <label name="prof" value="44"/>
- <label name="brk" value="45"/>
- <label name="setgid" value="46"/>
- <label name="getgid" value="47"/>
- <label name="signal" value="48"/>
- <label name="geteuid" value="49"/>
- <label name="getegid" value="50"/>
- <label name="acct" value="51"/>
- <label name="umount2" value="52"/>
- <label name="lock" value="53"/>
- <label name="ioctl" value="54"/>
- <label name="fcntl" value="55"/>
- <label name="mpx" value="56"/>
- <label name="setpgid" value="57"/>
- <label name="ulimit" value="58"/>
- <label name="oldolduname" value="59"/>
- <label name="umask" value="60"/>
- <label name="chroot" value="61"/>
- <label name="ustat" value="62"/>
- <label name="dup2" value="63"/>
- <label name="getppid" value="64"/>
- <label name="getpgrp" value="65"/>
- <label name="setsid" value="66"/>
- <label name="sigaction" value="67"/>
- <label name="sgetmask" value="68"/>
- <label name="ssetmask" value="69"/>
- <label name="setreuid" value="70"/>
- <label name="setregid" value="71"/>
- <label name="sigsuspend" value="72"/>
- <label name="sigpending" value="73"/>
- <label name="sethostname" value="74"/>
- <label name="setrlimit" value="75"/>
- <label name="getrlimit" value="76"/>
- <label name="getrusage" value="77"/>
- <label name="gettimeofday" value="78"/>
- <label name="settimeofday" value="79"/>
- <label name="getgroups" value="80"/>
- <label name="setgroups" value="81"/>
- <label name="select" value="82"/>
- <label name="symlink" value="83"/>
- <label name="oldlstat" value="84"/>
- <label name="readlink" value="85"/>
- <label name="uselib" value="86"/>
- <label name="swapon" value="87"/>
- <label name="reboot" value="88"/>
- <label name="readdir" value="89"/>
- <label name="mmap" value="90"/>
- <label name="munmap" value="91"/>
- <label name="truncate" value="92"/>
- <label name="ftruncate" value="93"/>
- <label name="fchmod" value="94"/>
- <label name="fchown" value="95"/>
- <label name="getpriority" value="96"/>
- <label name="setpriority" value="97"/>
- <label name="profil" value="98"/>
- <label name="statfs" value="99"/>
- <label name="fstatfs" value="100"/>
- <label name="ioperm" value="101"/>
- <label name="socketcall" value="102"/>
- <label name="syslog" value="103"/>
- <label name="setitimer" value="104"/>
- <label name="getitimer" value="105"/>
- <label name="stat" value="106"/>
- <label name="lstat" value="107"/>
- <label name="fstat" value="108"/>
- <label name="olduname" value="109"/>
- <label name="iopl" value="110"/>
- <label name="vhangup" value="111"/>
- <label name="idle" value="112"/>
- <label name="vm86old" value="113"/>
- <label name="wait4" value="114"/>
- <label name="swapoff" value="115"/>
- <label name="sysinfo" value="116"/>
- <label name="ipc" value="117"/>
- <label name="fsync" value="118"/>
- <label name="sigreturn" value="119"/>
- <label name="clone" value="120"/>
- <label name="setdomainname" value="121"/>
- <label name="uname" value="122"/>
- <label name="modify_ldt" value="123"/>
- <label name="adjtimex" value="124"/>
- <label name="mprotect" value="125"/>
- <label name="sigprocmask" value="126"/>
- <label name="create_module" value="127"/>
- <label name="init_module" value="128"/>
- <label name="delete_module" value="129"/>
- <label name="get_kernel_syms" value="130"/>
- <label name="quotactl" value="131"/>
- <label name="getpgid" value="132"/>
- <label name="fchdir" value="133"/>
- <label name="bdflush" value="134"/>
- <label name="sysfs" value="135"/>
- <label name="personality" value="136"/>
- <label name="afs_syscall" value="137"/>
- <label name="setfsuid" value="138"/>
- <label name="setfsgid" value="139"/>
- <label name="_llseek" value="140"/>
- <label name="getdents" value="141"/>
- <label name="_newselect" value="142"/>
- <label name="flock" value="143"/>
- <label name="msync" value="144"/>
- <label name="readv" value="145"/>
- <label name="writev" value="146"/>
- <label name="getsid" value="147"/>
- <label name="fdatasync" value="148"/>
- <label name="_sysctl" value="149"/>
- <label name="mlock" value="150"/>
- <label name="munlock" value="151"/>
- <label name="mlockall" value="152"/>
- <label name="munlockall" value="153"/>
- <label name="sched_setparam" value="154"/>
- <label name="sched_getparam" value="155"/>
- <label name="sched_setscheduler" value="156"/>
- <label name="sched_getscheduler" value="157"/>
- <label name="sched_yield" value="158"/>
- <label name="sched_get_priority_max" value="159"/>
- <label name="sched_get_priority_min" value="160"/>
- <label name="sched_rr_get_interval" value="161"/>
- <label name="nanosleep" value="162"/>
- <label name="mremap" value="163"/>
- <label name="setresuid" value="164"/>
- <label name="getresuid" value="165"/>
- <label name="vm86" value="166"/>
- <label name="query_module" value="167"/>
- <label name="poll" value="168"/>
- <label name="nfsservctl" value="169"/>
- <label name="setresgid" value="170"/>
- <label name="getresgid" value="171"/>
- <label name="prctl" value="172"/>
- <label name="rt_sigreturn" value="173"/>
- <label name="rt_sigaction" value="174"/>
- <label name="rt_sigprocmask" value="175"/>
- <label name="rt_sigpending" value="176"/>
- <label name="rt_sigtimedwait" value="177"/>
- <label name="rt_sigqueueinfo" value="178"/>
- <label name="rt_sigsuspend" value="179"/>
- <label name="pread64" value="180"/>
- <label name="pwrite64" value="181"/>
- <label name="chown" value="182"/>
- <label name="getcwd" value="183"/>
- <label name="capget" value="184"/>
- <label name="capset" value="185"/>
- <label name="sigaltstack" value="186"/>
- <label name="sendfile" value="187"/>
- <label name="getpmsg" value="188"/>
- <label name="putpmsg" value="189"/>
- <label name="vfork" value="190"/>
- <label name="ugetrlimit" value="191"/>
- <label name="mmap2" value="192"/>
- <label name="truncate64" value="193"/>
- <label name="ftruncate64" value="194"/>
- <label name="stat64" value="195"/>
- <label name="lstat64" value="196"/>
- <label name="fstat64" value="197"/>
- <label name="lchown32" value="198"/>
- <label name="getuid32" value="199"/>
- <label name="getgid32" value="200"/>
- <label name="geteuid32" value="201"/>
- <label name="getegid32" value="202"/>
- <label name="setreuid32" value="203"/>
- <label name="setregid32" value="204"/>
- <label name="getgroups32" value="205"/>
- <label name="setgroups32" value="206"/>
- <label name="fchown32" value="207"/>
- <label name="setresuid32" value="208"/>
- <label name="getresuid32" value="209"/>
- <label name="setresgid32" value="210"/>
- <label name="getresgid32" value="211"/>
- <label name="chown32" value="212"/>
- <label name="setuid32" value="213"/>
- <label name="setgid32" value="214"/>
- <label name="setfsuid32" value="215"/>
- <label name="setfsgid32" value="216"/>
- <label name="pivot_root" value="217"/>
- <label name="mincore" value="218"/>
- <label name="madvise" value="219"/>
- <label name="madvise1" value="219"/>
- <label name="getdents64" value="220"/>
- <label name="fcntl64" value="221"/>
- <label name="gettid" value="224"/>
- <label name="readahead" value="225"/>
- <label name="setxattr" value="226"/>
- <label name="lsetxattr" value="227"/>
- <label name="fsetxattr" value="228"/>
- <label name="getxattr" value="229"/>
- <label name="lgetxattr" value="230"/>
- <label name="fgetxattr" value="231"/>
- <label name="listxattr" value="232"/>
- <label name="llistxattr" value="233"/>
- <label name="flistxattr" value="234"/>
- <label name="removexattr" value="235"/>
- <label name="lremovexattr" value="236"/>
- <label name="fremovexattr" value="237"/>
- <label name="tkill" value="238"/>
- <label name="sendfile64" value="239"/>
- <label name="futex" value="240"/>
- <label name="sched_setaffinity" value="241"/>
- <label name="sched_getaffinity" value="242"/>
- <label name="set_thread_area" value="243"/>
- <label name="get_thread_area" value="244"/>
- <label name="io_setup" value="245"/>
- <label name="io_destroy" value="246"/>
- <label name="io_getevents" value="247"/>
- <label name="io_submit" value="248"/>
- <label name="io_cancel" value="249"/>
- <label name="fadvise64" value="250"/>
- <label name="set_zone_reclaim" value="251"/>
- <label name="exit_group" value="252"/>
- <label name="lookup_dcookie" value="253"/>
- <label name="epoll_create" value="254"/>
- <label name="epoll_ctl" value="255"/>
- <label name="epoll_wait" value="256"/>
- <label name="remap_file_pages" value="257"/>
- <label name="set_tid_address" value="258"/>
- <label name="timer_create" value="259"/>
- <label name="timer_settime" value="260"/>
- <label name="timer_gettime"/>
- <label name="timer_getoverrun"/>
- <label name="timer_delete"/>
- <label name="clock_settime"/>
- <label name="clock_gettime"/>
- <label name="clock_getres"/>
- <label name="clock_nanosleep"/>
- <label name="statfs64" value="268"/>
- <label name="fstatfs64" value="269"/>
- <label name="tgkill" value="270"/>
- <label name="utimes" value="271"/>
- <label name="fadvise64_64" value="272"/>
- <label name="vserver" value="273"/>
- <label name="mbind" value="274"/>
- <label name="get_mempolicy" value="275"/>
- <label name="set_mempolicy" value="276"/>
- <label name="mq_open" value="277"/>
- <label name="mq_unlink"/>
- <label name="mq_timedsend"/>
- <label name="mq_timedreceive"/>
- <label name="mq_notify"/>
- <label name="mq_getsetattr"/>
- <label name="sys_kexec_load" value="283"/>
- <label name="waitid" value="284"/>
- <label name="add_key" value="286"/>
- <label name="request_key" value="287"/>
- <label name="keyctl" value="288"/>
- <label name="ioprio_set" value="289"/>
- <label name="ioprio_get" value="290"/>
- <label name="inotify_init" value="291"/>
- <label name="inotify_add_watch" value="292"/>
- <label name="inotify_rm_watch" value="293"/>
- <label name="migrate_pages" value="294"/>
- <label name="openat" value="295"/>
- <label name="mkdirat" value="296"/>
- <label name="mknodat" value="297"/>
- <label name="fchownat" value="298"/>
- <label name="futimesat" value="299"/>
- <label name="fstatat64" value="300"/>
- <label name="unlinkat" value="301"/>
- <label name="renameat" value="302"/>
- <label name="linkat" value="303"/>
- <label name="symlinkat" value="304"/>
- <label name="readlinkat" value="305"/>
- <label name="fchmodat" value="306"/>
- <label name="faccessat" value="307"/>
- <label name="pselect6" value="308"/>
- <label name="ppoll" value="309"/>
- <label name="unshare" value="310"/>
- <label name="set_robust_list" value="311"/>
- <label name="get_robust_list" value="312"/>
- <label name="splice" value="313"/>
- <label name="sync_file_range" value="314"/>
- <label name="tee" value="315"/>
- <label name="vmsplice" value="316"/>
- <label name="ltt_trace_generic" value="317"/>
- <label name="ltt_register_generic" value="318"/>
- </enum>
- </type>
-
- <event name="syscall_entry">
- <description>System call entry</description>
- <field name="syscall_id"> <description>Syscall entry number in entry.S</description> <typeref name="syscall_name"/> </field>
- <field name="address"> <description>Address from which call was made</description> <pointer/> </field>
- </event>
-
- <event name="syscall_exit">
- <description>System call exit</description>
- </event>
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="kernel_arch" arch="mips">
- <description>The kernel facility has events related to kernel execution status
- for the MIPS architecture.</description>
- <type name="syscall_name">
- <enum>
- <label name="o32_base" value="3999"/><description>Linux o32 style syscalls</description>
- <label name="o32_syscall" value="4000"/>
- <label name="o32_exit" value="4001"/>
- <label name="o32_fork" value="4002"/>
- <label name="o32_read" value="4003"/>
- <label name="o32_write" value="4004"/>
- <label name="o32_open" value="4005"/>
- <label name="o32_close" value="4006"/>
- <label name="o32_waitpid" value="4007"/>
- <label name="o32_creat" value="4008"/>
- <label name="o32_link" value="4009"/>
- <label name="o32_unlink" value="4010"/>
- <label name="o32_execve" value="4011"/>
- <label name="o32_chdir" value="4012"/>
- <label name="o32_time" value="4013"/>
- <label name="o32_mknod" value="4014"/>
- <label name="o32_chmod" value="4015"/>
- <label name="o32_lchown" value="4016"/>
- <label name="o32_break" value="4017"/>
- <label name="o32_unused18" value="4018"/>
- <label name="o32_lseek" value="4019"/>
- <label name="o32_getpid" value="4020"/>
- <label name="o32_mount" value="4021"/>
- <label name="o32_umount" value="4022"/>
- <label name="o32_setuid" value="4023"/>
- <label name="o32_getuid" value="4024"/>
- <label name="o32_stime" value="4025"/>
- <label name="o32_ptrace" value="4026"/>
- <label name="o32_alarm" value="4027"/>
- <label name="o32_unused28" value="4028"/>
- <label name="o32_pause" value="4029"/>
- <label name="o32_utime" value="4030"/>
- <label name="o32_stty" value="4031"/>
- <label name="o32_gtty" value="4032"/>
- <label name="o32_access" value="4033"/>
- <label name="o32_nice" value="4034"/>
- <label name="o32_ftime" value="4035"/>
- <label name="o32_sync" value="4036"/>
- <label name="o32_kill" value="4037"/>
- <label name="o32_rename" value="4038"/>
- <label name="o32_mkdir" value="4039"/>
- <label name="o32_rmdir" value="4040"/>
- <label name="o32_dup" value="4041"/>
- <label name="o32_pipe" value="4042"/>
- <label name="o32_times" value="4043"/>
- <label name="o32_prof" value="4044"/>
- <label name="o32_brk" value="4045"/>
- <label name="o32_setgid" value="4046"/>
- <label name="o32_getgid" value="4047"/>
- <label name="o32_signal" value="4048"/>
- <label name="o32_geteuid" value="4049"/>
- <label name="o32_getegid" value="4050"/>
- <label name="o32_acct" value="4051"/>
- <label name="o32_umount2" value="4052"/>
- <label name="o32_lock" value="4053"/>
- <label name="o32_ioctl" value="4054"/>
- <label name="o32_fcntl" value="4055"/>
- <label name="o32_mpx" value="4056"/>
- <label name="o32_setpgid" value="4057"/>
- <label name="o32_ulimit" value="4058"/>
- <label name="o32_unused59" value="4059"/>
- <label name="o32_umask" value="4060"/>
- <label name="o32_chroot" value="4061"/>
- <label name="o32_ustat" value="4062"/>
- <label name="o32_dup2" value="4063"/>
- <label name="o32_getppid" value="4064"/>
- <label name="o32_getpgrp" value="4065"/>
- <label name="o32_setsid" value="4066"/>
- <label name="o32_sigaction" value="4067"/>
- <label name="o32_sgetmask" value="4068"/>
- <label name="o32_ssetmask" value="4069"/>
- <label name="o32_setreuid" value="4070"/>
- <label name="o32_setregid" value="4071"/>
- <label name="o32_sigsuspend" value="4072"/>
- <label name="o32_sigpending" value="4073"/>
- <label name="o32_sethostname" value="4074"/>
- <label name="o32_setrlimit" value="4075"/>
- <label name="o32_getrlimit" value="4076"/>
- <label name="o32_getrusage" value="4077"/>
- <label name="o32_gettimeofday" value="4078"/>
- <label name="o32_settimeofday" value="4079"/>
- <label name="o32_getgroups" value="4080"/>
- <label name="o32_setgroups" value="4081"/>
- <label name="o32_reserved82" value="4082"/>
- <label name="o32_symlink" value="4083"/>
- <label name="o32_unused84" value="4084"/>
- <label name="o32_readlink" value="4085"/>
- <label name="o32_uselib" value="4086"/>
- <label name="o32_swapon" value="4087"/>
- <label name="o32_reboot" value="4088"/>
- <label name="o32_readdir" value="4089"/>
- <label name="o32_mmap" value="4090"/>
- <label name="o32_munmap" value="4091"/>
- <label name="o32_truncate" value="4092"/>
- <label name="o32_ftruncate" value="4093"/>
- <label name="o32_fchmod" value="4094"/>
- <label name="o32_fchown" value="4095"/>
- <label name="o32_getpriority" value="4096"/>
- <label name="o32_setpriority" value="4097"/>
- <label name="o32_profil" value="4098"/>
- <label name="o32_statfs" value="4099"/>
- <label name="o32_fstatfs" value="4100"/>
- <label name="o32_ioperm" value="4101"/>
- <label name="o32_socketcall" value="4102"/>
- <label name="o32_syslog" value="4103"/>
- <label name="o32_setitimer" value="4104"/>
- <label name="o32_getitimer" value="4105"/>
- <label name="o32_stat" value="4106"/>
- <label name="o32_lstat" value="4107"/>
- <label name="o32_fstat" value="4108"/>
- <label name="o32_unused109" value="4109"/>
- <label name="o32_iopl" value="4110"/>
- <label name="o32_vhangup" value="4111"/>
- <label name="o32_idle" value="4112"/>
- <label name="o32_vm86" value="4113"/>
- <label name="o32_wait4" value="4114"/>
- <label name="o32_swapoff" value="4115"/>
- <label name="o32_sysinfo" value="4116"/>
- <label name="o32_ipc" value="4117"/>
- <label name="o32_fsync" value="4118"/>
- <label name="o32_sigreturn" value="4119"/>
- <label name="o32_clone" value="4120"/>
- <label name="o32_setdomainname" value="4121"/>
- <label name="o32_uname" value="4122"/>
- <label name="o32_modify_ldt" value="4123"/>
- <label name="o32_adjtimex" value="4124"/>
- <label name="o32_mprotect" value="4125"/>
- <label name="o32_sigprocmask" value="4126"/>
- <label name="o32_create_module" value="4127"/>
- <label name="o32_init_module" value="4128"/>
- <label name="o32_delete_module" value="4129"/>
- <label name="o32_get_kernel_syms" value="4130"/>
- <label name="o32_quotactl" value="4131"/>
- <label name="o32_getpgid" value="4132"/>
- <label name="o32_fchdir" value="4133"/>
- <label name="o32_bdflush" value="4134"/>
- <label name="o32_sysfs" value="4135"/>
- <label name="o32_personality" value="4136"/>
- <label name="o32_afs_syscall" value="4137"/>
- <label name="o32_setfsuid" value="4138"/>
- <label name="o32_setfsgid" value="4139"/>
- <label name="o32__llseek" value="4140"/>
- <label name="o32_getdents" value="4141"/>
- <label name="o32__newselect" value="4142"/>
- <label name="o32_flock" value="4143"/>
- <label name="o32_msync" value="4144"/>
- <label name="o32_readv" value="4145"/>
- <label name="o32_writev" value="4146"/>
- <label name="o32_cacheflush" value="4147"/>
- <label name="o32_cachectl" value="4148"/>
- <label name="o32_sysmips" value="4149"/>
- <label name="o32_unused150" value="4150"/>
- <label name="o32_getsid" value="4151"/>
- <label name="o32_fdatasync" value="4152"/>
- <label name="o32__sysctl" value="4153"/>
- <label name="o32_mlock" value="4154"/>
- <label name="o32_munlock" value="4155"/>
- <label name="o32_mlockall" value="4156"/>
- <label name="o32_munlockall" value="4157"/>
- <label name="o32_sched_setparam" value="4158"/>
- <label name="o32_sched_getparam" value="4159"/>
- <label name="o32_sched_setscheduler" value="4160"/>
- <label name="o32_sched_getscheduler" value="4161"/>
- <label name="o32_sched_yield" value="4162"/>
- <label name="o32_sched_get_priority_max" value="4163"/>
- <label name="o32_sched_get_priority_min" value="4164"/>
- <label name="o32_sched_rr_get_interval" value="4165"/>
- <label name="o32_nanosleep" value="4166"/>
- <label name="o32_mremap" value="4167"/>
- <label name="o32_accept" value="4168"/>
- <label name="o32_bind" value="4169"/>
- <label name="o32_connect" value="4170"/>
- <label name="o32_getpeername" value="4171"/>
- <label name="o32_getsockname" value="4172"/>
- <label name="o32_getsockopt" value="4173"/>
- <label name="o32_listen" value="4174"/>
- <label name="o32_recv" value="4175"/>
- <label name="o32_recvfrom" value="4176"/>
- <label name="o32_recvmsg" value="4177"/>
- <label name="o32_send" value="4178"/>
- <label name="o32_sendmsg" value="4179"/>
- <label name="o32_sendto" value="4180"/>
- <label name="o32_setsockopt" value="4181"/>
- <label name="o32_shutdown" value="4182"/>
- <label name="o32_socket" value="4183"/>
- <label name="o32_socketpair" value="4184"/>
- <label name="o32_setresuid" value="4185"/>
- <label name="o32_getresuid" value="4186"/>
- <label name="o32_query_module" value="4187"/>
- <label name="o32_poll" value="4188"/>
- <label name="o32_nfsservctl" value="4189"/>
- <label name="o32_setresgid" value="4190"/>
- <label name="o32_getresgid" value="4191"/>
- <label name="o32_prctl" value="4192"/>
- <label name="o32_rt_sigreturn" value="4193"/>
- <label name="o32_rt_sigaction" value="4194"/>
- <label name="o32_rt_sigprocmask" value="4195"/>
- <label name="o32_rt_sigpending" value="4196"/>
- <label name="o32_rt_sigtimedwait" value="4197"/>
- <label name="o32_rt_sigqueueinfo" value="4198"/>
- <label name="o32_rt_sigsuspend" value="4199"/>
- <label name="o32_pread64" value="4200"/>
- <label name="o32_pwrite64" value="4201"/>
- <label name="o32_chown" value="4202"/>
- <label name="o32_getcwd" value="4203"/>
- <label name="o32_capget" value="4204"/>
- <label name="o32_capset" value="4205"/>
- <label name="o32_sigaltstack" value="4206"/>
- <label name="o32_sendfile" value="4207"/>
- <label name="o32_getpmsg" value="4208"/>
- <label name="o32_putpmsg" value="4209"/>
- <label name="o32_mmap2" value="4210"/>
- <label name="o32_truncate64" value="4211"/>
- <label name="o32_ftruncate64" value="4212"/>
- <label name="o32_stat64" value="4213"/>
- <label name="o32_lstat64" value="4214"/>
- <label name="o32_fstat64" value="4215"/>
- <label name="o32_pivot_root" value="4216"/>
- <label name="o32_mincore" value="4217"/>
- <label name="o32_madvise" value="4218"/>
- <label name="o32_getdents64" value="4219"/>
- <label name="o32_fcntl64" value="4220"/>
- <label name="o32_reserved221" value="4221"/>
- <label name="o32_gettid" value="4222"/>
- <label name="o32_readahead" value="4223"/>
- <label name="o32_setxattr" value="4224"/>
- <label name="o32_lsetxattr" value="4225"/>
- <label name="o32_fsetxattr" value="4226"/>
- <label name="o32_getxattr" value="4227"/>
- <label name="o32_lgetxattr" value="4228"/>
- <label name="o32_fgetxattr" value="4229"/>
- <label name="o32_listxattr" value="4230"/>
- <label name="o32_llistxattr" value="4231"/>
- <label name="o32_flistxattr" value="4232"/>
- <label name="o32_removexattr" value="4233"/>
- <label name="o32_lremovexattr" value="4234"/>
- <label name="o32_fremovexattr" value="4235"/>
- <label name="o32_tkill" value="4236"/>
- <label name="o32_sendfile64" value="4237"/>
- <label name="o32_futex" value="4238"/>
- <label name="o32_sched_setaffinity" value="4239"/>
- <label name="o32_sched_getaffinity" value="4240"/>
- <label name="o32_io_setup" value="4241"/>
- <label name="o32_io_destroy" value="4242"/>
- <label name="o32_io_getevents" value="4243"/>
- <label name="o32_io_submit" value="4244"/>
- <label name="o32_io_cancel" value="4245"/>
- <label name="o32_exit_group" value="4246"/>
- <label name="o32_lookup_dcookie" value="4247"/>
- <label name="o32_epoll_create" value="4248"/>
- <label name="o32_epoll_ctl" value="4249"/>
- <label name="o32_epoll_wait" value="4250"/>
- <label name="o32_remap_file_pages" value="4251"/>
- <label name="o32_set_tid_address" value="4252"/>
- <label name="o32_restart_syscall" value="4253"/>
- <label name="o32_fadvise64" value="4254"/>
- <label name="o32_statfs64" value="4255"/>
- <label name="o32_fstatfs64" value="4256"/>
- <label name="o32_timer_create" value="4257"/>
- <label name="o32_timer_settime" value="4258"/>
- <label name="o32_timer_gettime" value="4259"/>
- <label name="o32_timer_getoverrun" value="4260"/>
- <label name="o32_timer_delete" value="4261"/>
- <label name="o32_clock_settime" value="4262"/>
- <label name="o32_clock_gettime" value="4263"/>
- <label name="o32_clock_getres" value="4264"/>
- <label name="o32_clock_nanosleep" value="4265"/>
- <label name="o32_tgkill" value="4266"/>
- <label name="o32_utimes" value="4267"/>
- <label name="o32_mbind" value="4268"/>
- <label name="o32_get_mempolicy" value="4269"/>
- <label name="o32_set_mempolicy" value="4270"/>
- <label name="o32_mq_open" value="4271"/>
- <label name="o32_mq_unlink" value="4272"/>
- <label name="o32_mq_timedsend" value="4273"/>
- <label name="o32_mq_timedreceive" value="4274"/>
- <label name="o32_mq_notify" value="4275"/>
- <label name="o32_mq_getsetattr" value="4276"/>
- <label name="o32_vserver" value="4277"/>
- <label name="o32_waitid" value="4278"/>
-
- <label name="o32_add_key" value="4280"/>
- <label name="o32_request_key" value="4281"/>
- <label name="o32_keyctl" value="4282"/>
- <label name="o32_set_thread_area" value="4283"/>
- <label name="o32_inotify_init" value="4284"/>
- <label name="o32_inotify_add_watch" value="4285"/>
- <label name="o32_inotify_rm_watch" value="4286"/>
- <label name="o32_migrate_pages" value="4287"/>
- <label name="o32_openat" value="4288"/>
- <label name="o32_mkdirat" value="4289"/>
- <label name="o32_mknodat" value="4290"/>
- <label name="o32_fchownat" value="4291"/>
- <label name="o32_futimesat" value="4292"/>
- <label name="o32_fstatat64" value="4293"/>
- <label name="o32_unlinkat" value="4294"/>
- <label name="o32_renameat" value="4295"/>
- <label name="o32_linkat" value="4296"/>
- <label name="o32_symlinkat" value="4297"/>
- <label name="o32_readlinkat" value="4298"/>
- <label name="o32_fchmodat" value="4299"/>
- <label name="o32_faccessat" value="4300"/>
- <label name="o32_pselect6" value="4301"/>
- <label name="o32_ppoll" value="4302"/>
- <label name="o32_unshare" value="4303"/>
- <label name="o32_set_robust_list" value="4304"/>
- <label name="o32_get_robust_list" value="4305"/>
- <label name="o32_splice" value="4306"/>
- <label name="o32_sync_file_range" value="4307"/>
- <label name="o32_tee" value="4308"/>
- <label name="o32_vmsplice" value="4309"/>
-
- <label name="l64_base" value="4999"/>
- <label name="l64_read" value="5000"/>
- <label name="l64_write" value="5001"/>
- <label name="l64_open" value="5002"/>
- <label name="l64_close" value="5003"/>
- <label name="l64_stat" value="5004"/>
- <label name="l64_fstat" value="5005"/>
- <label name="l64_lstat" value="5006"/>
- <label name="l64_poll" value="5007"/>
- <label name="l64_lseek" value="5008"/>
- <label name="l64_mmap" value="5009"/>
- <label name="l64_mprotect" value="5010"/>
- <label name="l64_munmap" value="5011"/>
- <label name="l64_brk" value="5012"/>
- <label name="l64_rt_sigaction" value="5013"/>
- <label name="l64_rt_sigprocmask" value="5014"/>
- <label name="l64_ioctl" value="5015"/>
- <label name="l64_pread64" value="5016"/>
- <label name="l64_pwrite64" value="5017"/>
- <label name="l64_readv" value="5018"/>
- <label name="l64_writev" value="5019"/>
- <label name="l64_access" value="5020"/>
- <label name="l64_pipe" value="5021"/>
- <label name="l64__newselect" value="5022"/>
- <label name="l64_sched_yield" value="5023"/>
- <label name="l64_mremap" value="5024"/>
- <label name="l64_msync" value="5025"/>
- <label name="l64_mincore" value="5026"/>
- <label name="l64_madvise" value="5027"/>
- <label name="l64_shmget" value="5028"/>
- <label name="l64_shmat" value="5029"/>
- <label name="l64_shmctl" value="5030"/>
- <label name="l64_dup" value="5031"/>
- <label name="l64_dup2" value="5032"/>
- <label name="l64_pause" value="5033"/>
- <label name="l64_nanosleep" value="5034"/>
- <label name="l64_getitimer" value="5035"/>
- <label name="l64_setitimer" value="5036"/>
- <label name="l64_alarm" value="5037"/>
- <label name="l64_getpid" value="5038"/>
- <label name="l64_sendfile" value="5039"/>
- <label name="l64_socket" value="5040"/>
- <label name="l64_connect" value="5041"/>
- <label name="l64_accept" value="5042"/>
- <label name="l64_sendto" value="5043"/>
- <label name="l64_recvfrom" value="5044"/>
- <label name="l64_sendmsg" value="5045"/>
- <label name="l64_recvmsg" value="5046"/>
- <label name="l64_shutdown" value="5047"/>
- <label name="l64_bind" value="5048"/>
- <label name="l64_listen" value="5049"/>
- <label name="l64_getsockname" value="5050"/>
- <label name="l64_getpeername" value="5051"/>
- <label name="l64_socketpair" value="5052"/>
- <label name="l64_setsockopt" value="5053"/>
- <label name="l64_getsockopt" value="5054"/>
- <label name="l64_clone" value="5055"/>
- <label name="l64_fork" value="5056"/>
- <label name="l64_execve" value="5057"/>
- <label name="l64_exit" value="5058"/>
- <label name="l64_wait4" value="5059"/>
- <label name="l64_kill" value="5060"/>
- <label name="l64_uname" value="5061"/>
- <label name="l64_semget" value="5062"/>
- <label name="l64_semop" value="5063"/>
- <label name="l64_semctl" value="5064"/>
- <label name="l64_shmdt" value="5065"/>
- <label name="l64_msgget" value="5066"/>
- <label name="l64_msgsnd" value="5067"/>
- <label name="l64_msgrcv" value="5068"/>
- <label name="l64_msgctl" value="5069"/>
- <label name="l64_fcntl" value="5070"/>
- <label name="l64_flock" value="5071"/>
- <label name="l64_fsync" value="5072"/>
- <label name="l64_fdatasync" value="5073"/>
- <label name="l64_truncate" value="5074"/>
- <label name="l64_ftruncate" value="5075"/>
- <label name="l64_getdents" value="5076"/>
- <label name="l64_getcwd" value="5077"/>
- <label name="l64_chdir" value="5078"/>
- <label name="l64_fchdir" value="5079"/>
- <label name="l64_rename" value="5080"/>
- <label name="l64_mkdir" value="5081"/>
- <label name="l64_rmdir" value="5082"/>
- <label name="l64_creat" value="5083"/>
- <label name="l64_link" value="5084"/>
- <label name="l64_unlink" value="5085"/>
- <label name="l64_symlink" value="5086"/>
- <label name="l64_readlink" value="5087"/>
- <label name="l64_chmod" value="5088"/>
- <label name="l64_fchmod" value="5089"/>
- <label name="l64_chown" value="5090"/>
- <label name="l64_fchown" value="5091"/>
- <label name="l64_lchown" value="5092"/>
- <label name="l64_umask" value="5093"/>
- <label name="l64_gettimeofday" value="5094"/>
- <label name="l64_getrlimit" value="5095"/>
- <label name="l64_getrusage" value="5096"/>
- <label name="l64_sysinfo" value="5097"/>
- <label name="l64_times" value="5098"/>
- <label name="l64_ptrace" value="5099"/>
- <label name="l64_getuid" value="5100"/>
- <label name="l64_syslog" value="5101"/>
- <label name="l64_getgid" value="5102"/>
- <label name="l64_setuid" value="5103"/>
- <label name="l64_setgid" value="5104"/>
- <label name="l64_geteuid" value="5105"/>
- <label name="l64_getegid" value="5106"/>
- <label name="l64_setpgid" value="5107"/>
- <label name="l64_getppid" value="5108"/>
- <label name="l64_getpgrp" value="5109"/>
- <label name="l64_setsid" value="5110"/>
- <label name="l64_setreuid" value="5111"/>
- <label name="l64_setregid" value="5112"/>
- <label name="l64_getgroups" value="5113"/>
- <label name="l64_setgroups" value="5114"/>
- <label name="l64_setresuid" value="5115"/>
- <label name="l64_getresuid" value="5116"/>
- <label name="l64_setresgid" value="5117"/>
- <label name="l64_getresgid" value="5118"/>
- <label name="l64_getpgid" value="5119"/>
- <label name="l64_setfsuid" value="5120"/>
- <label name="l64_setfsgid" value="5121"/>
- <label name="l64_getsid" value="5122"/>
- <label name="l64_capget" value="5123"/>
- <label name="l64_capset" value="5124"/>
- <label name="l64_rt_sigpending" value="5125"/>
- <label name="l64_rt_sigtimedwait" value="5126"/>
- <label name="l64_rt_sigqueueinfo" value="5127"/>
- <label name="l64_rt_sigsuspend" value="5128"/>
- <label name="l64_sigaltstack" value="5129"/>
- <label name="l64_utime" value="5130"/>
- <label name="l64_mknod" value="5131"/>
- <label name="l64_personality" value="5132"/>
- <label name="l64_ustat" value="5133"/>
- <label name="l64_statfs" value="5134"/>
- <label name="l64_fstatfs" value="5135"/>
- <label name="l64_sysfs" value="5136"/>
- <label name="l64_getpriority" value="5137"/>
- <label name="l64_setpriority" value="5138"/>
- <label name="l64_sched_setparam" value="5139"/>
- <label name="l64_sched_getparam" value="5140"/>
- <label name="l64_sched_setscheduler" value="5141"/>
- <label name="l64_sched_getscheduler" value="5142"/>
- <label name="l64_sched_get_priority_max" value="5143"/>
- <label name="l64_sched_get_priority_min" value="5144"/>
- <label name="l64_sched_rr_get_interval" value="5145"/>
- <label name="l64_mlock" value="5146"/>
- <label name="l64_munlock" value="5147"/>
- <label name="l64_mlockall" value="5148"/>
- <label name="l64_munlockall" value="5149"/>
- <label name="l64_vhangup" value="5150"/>
- <label name="l64_pivot_root" value="5151"/>
- <label name="l64__sysctl" value="5152"/>
- <label name="l64_prctl" value="5153"/>
- <label name="l64_adjtimex" value="5154"/>
- <label name="l64_setrlimit" value="5155"/>
- <label name="l64_chroot" value="5156"/>
- <label name="l64_sync" value="5157"/>
- <label name="l64_acct" value="5158"/>
- <label name="l64_settimeofday" value="5159"/>
- <label name="l64_mount" value="5160"/>
- <label name="l64_umount2" value="5161"/>
- <label name="l64_swapon" value="5162"/>
- <label name="l64_swapoff" value="5163"/>
- <label name="l64_reboot" value="5164"/>
- <label name="l64_sethostname" value="5165"/>
- <label name="l64_setdomainname" value="5166"/>
- <label name="l64_create_module" value="5167"/>
- <label name="l64_init_module" value="5168"/>
- <label name="l64_delete_module" value="5169"/>
- <label name="l64_get_kernel_syms" value="5170"/>
- <label name="l64_query_module" value="5171"/>
- <label name="l64_quotactl" value="5172"/>
- <label name="l64_nfsservctl" value="5173"/>
- <label name="l64_getpmsg" value="5174"/>
- <label name="l64_putpmsg" value="5175"/>
- <label name="l64_afs_syscall" value="5176"/>
- <label name="l64_reserved177" value="5177"/>
- <label name="l64_gettid" value="5178"/>
- <label name="l64_readahead" value="5179"/>
- <label name="l64_setxattr" value="5180"/>
- <label name="l64_lsetxattr" value="5181"/>
- <label name="l64_fsetxattr" value="5182"/>
- <label name="l64_getxattr" value="5183"/>
- <label name="l64_lgetxattr" value="5184"/>
- <label name="l64_fgetxattr" value="5185"/>
- <label name="l64_listxattr" value="5186"/>
- <label name="l64_llistxattr" value="5187"/>
- <label name="l64_flistxattr" value="5188"/>
- <label name="l64_removexattr" value="5189"/>
- <label name="l64_lremovexattr" value="5190"/>
- <label name="l64_fremovexattr" value="5191"/>
- <label name="l64_tkill" value="5192"/>
- <label name="l64_reserved193" value="5193"/>
- <label name="l64_futex" value="5194"/>
- <label name="l64_sched_setaffinity" value="5195"/>
- <label name="l64_sched_getaffinity" value="5196"/>
- <label name="l64_cacheflush" value="5197"/>
- <label name="l64_cachectl" value="5198"/>
- <label name="l64_sysmips" value="5199"/>
- <label name="l64_io_setup" value="5200"/>
- <label name="l64_io_destroy" value="5201"/>
- <label name="l64_io_getevents" value="5202"/>
- <label name="l64_io_submit" value="5203"/>
- <label name="l64_io_cancel" value="5204"/>
- <label name="l64_exit_group" value="5205"/>
- <label name="l64_lookup_dcookie" value="5206"/>
- <label name="l64_epoll_create" value="5207"/>
- <label name="l64_epoll_ctl" value="5208"/>
- <label name="l64_epoll_wait" value="5209"/>
- <label name="l64_remap_file_pages" value="5210"/>
- <label name="l64_rt_sigreturn" value="5211"/>
- <label name="l64_set_tid_address" value="5212"/>
- <label name="l64_restart_syscall" value="5213"/>
- <label name="l64_semtimedop" value="5214"/>
- <label name="l64_fadvise64" value="5215"/>
- <label name="l64_timer_create" value="5216"/>
- <label name="l64_timer_settime" value="5217"/>
- <label name="l64_timer_gettime" value="5218"/>
- <label name="l64_timer_getoverrun" value="5219"/>
- <label name="l64_timer_delete" value="5220"/>
- <label name="l64_clock_settime" value="5221"/>
- <label name="l64_clock_gettime" value="5222"/>
- <label name="l64_clock_getres" value="5223"/>
- <label name="l64_clock_nanosleep" value="5224"/>
- <label name="l64_tgkill" value="5225"/>
- <label name="l64_utimes" value="5226"/>
- <label name="l64_mbind" value="5227"/>
- <label name="l64_get_mempolicy" value="5228"/>
- <label name="l64_set_mempolicy" value="5229"/>
- <label name="l64_mq_open" value="5230"/>
- <label name="l64_mq_unlink" value="5231"/>
- <label name="l64_mq_timedsend" value="5232"/>
- <label name="l64_mq_timedreceive" value="5233"/>
- <label name="l64_mq_notify" value="5234"/>
- <label name="l64_mq_getsetattr" value="5235"/>
- <label name="l64_vserver" value="5236"/>
- <label name="l64_waitid" value="5237"/>
-
- <label name="l64_add_key" value="5239"/>
- <label name="l64_request_key" value="5240"/>
- <label name="l64_keyctl" value="5241"/>
- <label name="l64_set_thread_area" value="5242"/>
- <label name="l64_inotify_init" value="5243"/>
- <label name="l64_inotify_add_watch" value="5244"/>
- <label name="l64_inotify_rm_watch" value="5245"/>
- <label name="l64_migrate_pages" value="5246"/>
- <label name="l64_openat" value="5247"/>
- <label name="l64_mkdirat" value="5248"/>
- <label name="l64_mknodat" value="5249"/>
- <label name="l64_fchownat" value="5250"/>
- <label name="l64_futimesat" value="5251"/>
- <label name="l64_fstatat64" value="5252"/>
- <label name="l64_unlinkat" value="5253"/>
- <label name="l64_renameat" value="5254"/>
- <label name="l64_linkat" value="5255"/>
- <label name="l64_symlinkat" value="5256"/>
- <label name="l64_readlinkat" value="5257"/>
- <label name="l64_fchmodat" value="5258"/>
- <label name="l64_faccessat" value="5259"/>
- <label name="l64_pselect6" value="5260"/>
- <label name="l64_ppoll" value="5261"/>
- <label name="l64_unshare" value="5262"/>
- <label name="l64_set_robust_list" value="5263"/>
- <label name="l64_get_robust_list" value="5264"/>
- <label name="l64_splice" value="5265"/>
- <label name="l64_sync_file_range" value="5266"/>
- <label name="l64_tee" value="5267"/>
- <label name="l64_vmsplice" value="5268"/>
-
- <label name="N32_base" value="5999"/>
- <label name="N32_read" value="6000"/>
- <label name="N32_write" value="6001"/>
- <label name="N32_open" value="6002"/>
- <label name="N32_close" value="6003"/>
- <label name="N32_stat" value="6004"/>
- <label name="N32_fstat" value="6005"/>
- <label name="N32_lstat" value="6006"/>
- <label name="N32_poll" value="6007"/>
- <label name="N32_lseek" value="6008"/>
- <label name="N32_mmap" value="6009"/>
- <label name="N32_mprotect" value="6010"/>
- <label name="N32_munmap" value="6011"/>
- <label name="N32_brk" value="6012"/>
- <label name="N32_rt_sigaction" value="6013"/>
- <label name="N32_rt_sigprocmask" value="6014"/>
- <label name="N32_ioctl" value="6015"/>
- <label name="N32_pread64" value="6016"/>
- <label name="N32_pwrite64" value="6017"/>
- <label name="N32_readv" value="6018"/>
- <label name="N32_writev" value="6019"/>
- <label name="N32_access" value="6020"/>
- <label name="N32_pipe" value="6021"/>
- <label name="N32__newselect" value="6022"/>
- <label name="N32_sched_yield" value="6023"/>
- <label name="N32_mremap" value="6024"/>
- <label name="N32_msync" value="6025"/>
- <label name="N32_mincore" value="6026"/>
- <label name="N32_madvise" value="6027"/>
- <label name="N32_shmget" value="6028"/>
- <label name="N32_shmat" value="6029"/>
- <label name="N32_shmctl" value="6030"/>
- <label name="N32_dup" value="6031"/>
- <label name="N32_dup2" value="6032"/>
- <label name="N32_pause" value="6033"/>
- <label name="N32_nanosleep" value="6034"/>
- <label name="N32_getitimer" value="6035"/>
- <label name="N32_setitimer" value="6036"/>
- <label name="N32_alarm" value="6037"/>
- <label name="N32_getpid" value="6038"/>
- <label name="N32_sendfile" value="6039"/>
- <label name="N32_socket" value="6040"/>
- <label name="N32_connect" value="6041"/>
- <label name="N32_accept" value="6042"/>
- <label name="N32_sendto" value="6043"/>
- <label name="N32_recvfrom" value="6044"/>
- <label name="N32_sendmsg" value="6045"/>
- <label name="N32_recvmsg" value="6046"/>
- <label name="N32_shutdown" value="6047"/>
- <label name="N32_bind" value="6048"/>
- <label name="N32_listen" value="6049"/>
- <label name="N32_getsockname" value="6050"/>
- <label name="N32_getpeername" value="6051"/>
- <label name="N32_socketpair" value="6052"/>
- <label name="N32_setsockopt" value="6053"/>
- <label name="N32_getsockopt" value="6054"/>
- <label name="N32_clone" value="6055"/>
- <label name="N32_fork" value="6056"/>
- <label name="N32_execve" value="6057"/>
- <label name="N32_exit" value="6058"/>
- <label name="N32_wait4" value="6059"/>
- <label name="N32_kill" value="6060"/>
- <label name="N32_uname" value="6061"/>
- <label name="N32_semget" value="6062"/>
- <label name="N32_semop" value="6063"/>
- <label name="N32_semctl" value="6064"/>
- <label name="N32_shmdt" value="6065"/>
- <label name="N32_msgget" value="6066"/>
- <label name="N32_msgsnd" value="6067"/>
- <label name="N32_msgrcv" value="6068"/>
- <label name="N32_msgctl" value="6069"/>
- <label name="N32_fcntl" value="6070"/>
- <label name="N32_flock" value="6071"/>
- <label name="N32_fsync" value="6072"/>
- <label name="N32_fdatasync" value="6073"/>
- <label name="N32_truncate" value="6074"/>
- <label name="N32_ftruncate" value="6075"/>
- <label name="N32_getdents" value="6076"/>
- <label name="N32_getcwd" value="6077"/>
- <label name="N32_chdir" value="6078"/>
- <label name="N32_fchdir" value="6079"/>
- <label name="N32_rename" value="6080"/>
- <label name="N32_mkdir" value="6081"/>
- <label name="N32_rmdir" value="6082"/>
- <label name="N32_creat" value="6083"/>
- <label name="N32_link" value="6084"/>
- <label name="N32_unlink" value="6085"/>
- <label name="N32_symlink" value="6086"/>
- <label name="N32_readlink" value="6087"/>
- <label name="N32_chmod" value="6088"/>
- <label name="N32_fchmod" value="6089"/>
- <label name="N32_chown" value="6090"/>
- <label name="N32_fchown" value="6091"/>
- <label name="N32_lchown" value="6092"/>
- <label name="N32_umask" value="6093"/>
- <label name="N32_gettimeofday" value="6094"/>
- <label name="N32_getrlimit" value="6095"/>
- <label name="N32_getrusage" value="6096"/>
- <label name="N32_sysinfo" value="6097"/>
- <label name="N32_times" value="6098"/>
- <label name="N32_ptrace" value="6099"/>
- <label name="N32_getuid" value="6100"/>
- <label name="N32_syslog" value="6101"/>
- <label name="N32_getgid" value="6102"/>
- <label name="N32_setuid" value="6103"/>
- <label name="N32_setgid" value="6104"/>
- <label name="N32_geteuid" value="6105"/>
- <label name="N32_getegid" value="6106"/>
- <label name="N32_setpgid" value="6107"/>
- <label name="N32_getppid" value="6108"/>
- <label name="N32_getpgrp" value="6109"/>
- <label name="N32_setsid" value="6110"/>
- <label name="N32_setreuid" value="6111"/>
- <label name="N32_setregid" value="6112"/>
- <label name="N32_getgroups" value="6113"/>
- <label name="N32_setgroups" value="6114"/>
- <label name="N32_setresuid" value="6115"/>
- <label name="N32_getresuid" value="6116"/>
- <label name="N32_setresgid" value="6117"/>
- <label name="N32_getresgid" value="6118"/>
- <label name="N32_getpgid" value="6119"/>
- <label name="N32_setfsuid" value="6120"/>
- <label name="N32_setfsgid" value="6121"/>
- <label name="N32_getsid" value="6122"/>
- <label name="N32_capget" value="6123"/>
- <label name="N32_capset" value="6124"/>
- <label name="N32_rt_sigpending" value="6125"/>
- <label name="N32_rt_sigtimedwait" value="6126"/>
- <label name="N32_rt_sigqueueinfo" value="6127"/>
- <label name="N32_rt_sigsuspend" value="6128"/>
- <label name="N32_sigaltstack" value="6129"/>
- <label name="N32_utime" value="6130"/>
- <label name="N32_mknod" value="6131"/>
- <label name="N32_personality" value="6132"/>
- <label name="N32_ustat" value="6133"/>
- <label name="N32_statfs" value="6134"/>
- <label name="N32_fstatfs" value="6135"/>
- <label name="N32_sysfs" value="6136"/>
- <label name="N32_getpriority" value="6137"/>
- <label name="N32_setpriority" value="6138"/>
- <label name="N32_sched_setparam" value="6139"/>
- <label name="N32_sched_getparam" value="6140"/>
- <label name="N32_sched_setscheduler" value="6141"/>
- <label name="N32_sched_getscheduler" value="6142"/>
- <label name="N32_sched_get_priority_max" value="6143"/>
- <label name="N32_sched_get_priority_min" value="6144"/>
- <label name="N32_sched_rr_get_interval" value="6145"/>
- <label name="N32_mlock" value="6146"/>
- <label name="N32_munlock" value="6147"/>
- <label name="N32_mlockall" value="6148"/>
- <label name="N32_munlockall" value="6149"/>
- <label name="N32_vhangup" value="6150"/>
- <label name="N32_pivot_root" value="6151"/>
- <label name="N32__sysctl" value="6152"/>
- <label name="N32_prctl" value="6153"/>
- <label name="N32_adjtimex" value="6154"/>
- <label name="N32_setrlimit" value="6155"/>
- <label name="N32_chroot" value="6156"/>
- <label name="N32_sync" value="6157"/>
- <label name="N32_acct" value="6158"/>
- <label name="N32_settimeofday" value="6159"/>
- <label name="N32_mount" value="6160"/>
- <label name="N32_umount2" value="6161"/>
- <label name="N32_swapon" value="6162"/>
- <label name="N32_swapoff" value="6163"/>
- <label name="N32_reboot" value="6164"/>
- <label name="N32_sethostname" value="6165"/>
- <label name="N32_setdomainname" value="6166"/>
- <label name="N32_create_module" value="6167"/>
- <label name="N32_init_module" value="6168"/>
- <label name="N32_delete_module" value="6169"/>
- <label name="N32_get_kernel_syms" value="6170"/>
- <label name="N32_query_module" value="6171"/>
- <label name="N32_quotactl" value="6172"/>
- <label name="N32_nfsservctl" value="6173"/>
- <label name="N32_getpmsg" value="6174"/>
- <label name="N32_putpmsg" value="6175"/>
- <label name="N32_afs_syscall" value="6176"/>
- <label name="N32_reserved177" value="6177"/>
- <label name="N32_gettid" value="6178"/>
- <label name="N32_readahead" value="6179"/>
- <label name="N32_setxattr" value="6180"/>
- <label name="N32_lsetxattr" value="6181"/>
- <label name="N32_fsetxattr" value="6182"/>
- <label name="N32_getxattr" value="6183"/>
- <label name="N32_lgetxattr" value="6184"/>
- <label name="N32_fgetxattr" value="6185"/>
- <label name="N32_listxattr" value="6186"/>
- <label name="N32_llistxattr" value="6187"/>
- <label name="N32_flistxattr" value="6188"/>
- <label name="N32_removexattr" value="6189"/>
- <label name="N32_lremovexattr" value="6190"/>
- <label name="N32_fremovexattr" value="6191"/>
- <label name="N32_tkill" value="6192"/>
- <label name="N32_reserved193" value="6193"/>
- <label name="N32_futex" value="6194"/>
- <label name="N32_sched_setaffinity" value="6195"/>
- <label name="N32_sched_getaffinity" value="6196"/>
- <label name="N32_cacheflush" value="6197"/>
- <label name="N32_cachectl" value="6198"/>
- <label name="N32_sysmips" value="6199"/>
- <label name="N32_io_setup" value="6200"/>
- <label name="N32_io_destroy" value="6201"/>
- <label name="N32_io_getevents" value="6202"/>
- <label name="N32_io_submit" value="6203"/>
- <label name="N32_io_cancel" value="6204"/>
- <label name="N32_exit_group" value="6205"/>
- <label name="N32_lookup_dcookie" value="6206"/>
- <label name="N32_epoll_create" value="6207"/>
- <label name="N32_epoll_ctl" value="6208"/>
- <label name="N32_epoll_wait" value="6209"/>
- <label name="N32_remap_file_pages" value="6210"/>
- <label name="N32_rt_sigreturn" value="6211"/>
- <label name="N32_fcntl64" value="6212"/>
- <label name="N32_set_tid_address" value="6213"/>
- <label name="N32_restart_syscall" value="6214"/>
- <label name="N32_semtimedop" value="6215"/>
- <label name="N32_fadvise64" value="6216"/>
- <label name="N32_statfs64" value="6217"/>
- <label name="N32_fstatfs64" value="6218"/>
- <label name="N32_sendfile64" value="6219"/>
- <label name="N32_timer_create" value="6220"/>
- <label name="N32_timer_settime" value="6221"/>
- <label name="N32_timer_gettime" value="6222"/>
- <label name="N32_timer_getoverrun" value="6223"/>
- <label name="N32_timer_delete" value="6224"/>
- <label name="N32_clock_settime" value="6225"/>
- <label name="N32_clock_gettime" value="6226"/>
- <label name="N32_clock_getres" value="6227"/>
- <label name="N32_clock_nanosleep" value="6228"/>
- <label name="N32_tgkill" value="6229"/>
- <label name="N32_utimes" value="6230"/>
- <label name="N32_mbind" value="6231"/>
- <label name="N32_get_mempolicy" value="6232"/>
- <label name="N32_set_mempolicy" value="6233"/>
- <label name="N32_mq_open" value="6234"/>
- <label name="N32_mq_unlink" value="6235"/>
- <label name="N32_mq_timedsend" value="6236"/>
- <label name="N32_mq_timedreceive" value="6237"/>
- <label name="N32_mq_notify" value="6238"/>
- <label name="N32_mq_getsetattr" value="6239"/>
- <label name="N32_vserver" value="6240"/>
- <label name="N32_waitid" value="6241"/>
-
- <label name="N32_add_key" value="6243"/>
- <label name="N32_request_key" value="6244"/>
- <label name="N32_keyctl" value="6245"/>
- <label name="N32_set_thread_area" value="6246"/>
- <label name="N32_inotify_init" value="6247"/>
- <label name="N32_inotify_add_watch" value="6248"/>
- <label name="N32_inotify_rm_watch" value="6249"/>
- <label name="N32_migrate_pages" value="6250"/>
- <label name="N32_openat" value="6251"/>
- <label name="N32_mkdirat" value="6252"/>
- <label name="N32_mknodat" value="6253"/>
- <label name="N32_fchownat" value="6254"/>
- <label name="N32_futimesat" value="6255"/>
- <label name="N32_fstatat64" value="6256"/>
- <label name="N32_unlinkat" value="6257"/>
- <label name="N32_renameat" value="6258"/>
- <label name="N32_linkat" value="6259"/>
- <label name="N32_symlinkat" value="6260"/>
- <label name="N32_readlinkat" value="6261"/>
- <label name="N32_fchmodat" value="6262"/>
- <label name="N32_faccessat" value="6263"/>
- <label name="N32_pselect6" value="6264"/>
- <label name="N32_ppoll" value="6265"/>
- <label name="N32_unshare" value="6266"/>
- <label name="N32_set_robust_list" value="6267"/>
- <label name="N32_get_robust_list" value="6268"/>
- <label name="N32_splice" value="6269"/>
- <label name="N32_sync_file_range" value="6270"/>
- <label name="N32_tee" value="6271"/>
- <label name="N32_vmsplice" value="6272"/>
- </enum>
- </type>
-
- <event name="syscall_entry">
- <description>System call entry</description>
- <field name="syscall_id"> <description>Syscall entry number in entry.S</description>
- <typeref name="syscall_name"/> </field>
- <field name="address"> <description>Address from which call was made</description> <pointer/> </field>
- </event>
-
- <event name="syscall_exit">
- <description>System call exit</description>
- </event>
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="kernel_arch" arch="powerpc">
- <description>The kernel facility has events related to kernel execution status for the powerpc architecture.</description>
- <type name="syscall_name">
- <enum>
- <label name="restart_syscall" value="0"/>
- <label name="exit" value="1"/>
- <label name="fork" value="2"/>
- <label name="read" value="3"/>
- <label name="write" value="4"/>
- <label name="open" value="5"/>
- <label name="close" value="6"/>
- <label name="waitpid" value="7"/>
- <label name="creat" value="8"/>
- <label name="link" value="9"/>
- <label name="unlink" value="10"/>
- <label name="execve" value="11"/>
- <label name="chdir" value="12"/>
- <label name="time" value="13"/>
- <label name="mknod" value="14"/>
- <label name="chmod" value="15"/>
- <label name="lchown" value="16"/>
- <label name="break" value="17"/>
- <label name="oldstat" value="18"/>
- <label name="lseek" value="19"/>
- <label name="getpid" value="20"/>
- <label name="mount" value="21"/>
- <label name="umount" value="22"/>
- <label name="setuid" value="23"/>
- <label name="getuid" value="24"/>
- <label name="stime" value="25"/>
- <label name="ptrace" value="26"/>
- <label name="alarm" value="27"/>
- <label name="oldfstat" value="28"/>
- <label name="pause" value="29"/>
- <label name="utime" value="30"/>
- <label name="stty" value="31"/>
- <label name="gtty" value="32"/>
- <label name="access" value="33"/>
- <label name="nice" value="34"/>
- <label name="ftime" value="35"/>
- <label name="sync" value="36"/>
- <label name="kill" value="37"/>
- <label name="rename" value="38"/>
- <label name="mkdir" value="39"/>
- <label name="rmdir" value="40"/>
- <label name="dup" value="41"/>
- <label name="pipe" value="42"/>
- <label name="times" value="43"/>
- <label name="prof" value="44"/>
- <label name="brk" value="45"/>
- <label name="setgid" value="46"/>
- <label name="getgid" value="47"/>
- <label name="signal" value="48"/>
- <label name="geteuid" value="49"/>
- <label name="getegid" value="50"/>
- <label name="acct" value="51"/>
- <label name="umount2" value="52"/>
- <label name="lock" value="53"/>
- <label name="ioctl" value="54"/>
- <label name="fcntl" value="55"/>
- <label name="mpx" value="56"/>
- <label name="setpgid" value="57"/>
- <label name="ulimit" value="58"/>
- <label name="oldolduname" value="59"/>
- <label name="umask" value="60"/>
- <label name="chroot" value="61"/>
- <label name="ustat" value="62"/>
- <label name="dup2" value="63"/>
- <label name="getppid" value="64"/>
- <label name="getpgrp" value="65"/>
- <label name="setsid" value="66"/>
- <label name="sigaction" value="67"/>
- <label name="sgetmask" value="68"/>
- <label name="ssetmask" value="69"/>
- <label name="setreuid" value="70"/>
- <label name="setregid" value="71"/>
- <label name="sigsuspend" value="72"/>
- <label name="sigpending" value="73"/>
- <label name="sethostname" value="74"/>
- <label name="setrlimit" value="75"/>
- <label name="getrlimit" value="76"/>
- <label name="getrusage" value="77"/>
- <label name="gettimeofday" value="78"/>
- <label name="settimeofday" value="79"/>
- <label name="getgroups" value="80"/>
- <label name="setgroups" value="81"/>
- <label name="select" value="82"/>
- <label name="symlink" value="83"/>
- <label name="oldlstat" value="84"/>
- <label name="readlink" value="85"/>
- <label name="uselib" value="86"/>
- <label name="swapon" value="87"/>
- <label name="reboot" value="88"/>
- <label name="readdir" value="89"/>
- <label name="mmap" value="90"/>
- <label name="munmap" value="91"/>
- <label name="truncate" value="92"/>
- <label name="ftruncate" value="93"/>
- <label name="fchmod" value="94"/>
- <label name="fchown" value="95"/>
- <label name="getpriority" value="96"/>
- <label name="setpriority" value="97"/>
- <label name="profil" value="98"/>
- <label name="statfs" value="99"/>
- <label name="fstatfs" value="100"/>
- <label name="ioperm" value="101"/>
- <label name="socketcall" value="102"/>
- <label name="syslog" value="103"/>
- <label name="setitimer" value="104"/>
- <label name="getitimer" value="105"/>
- <label name="stat" value="106"/>
- <label name="lstat" value="107"/>
- <label name="fstat" value="108"/>
- <label name="olduname" value="109"/>
- <label name="iopl" value="110"/>
- <label name="vhangup" value="111"/>
- <label name="idle" value="112"/>
- <label name="vm86" value="113"/>
- <label name="wait4" value="114"/>
- <label name="swapoff" value="115"/>
- <label name="sysinfo" value="116"/>
- <label name="ipc" value="117"/>
- <label name="fsync" value="118"/>
- <label name="sigreturn" value="119"/>
- <label name="clone" value="120"/>
- <label name="setdomainname" value="121"/>
- <label name="uname" value="122"/>
- <label name="modify_ldt" value="123"/>
- <label name="adjtimex" value="124"/>
- <label name="mprotect" value="125"/>
- <label name="sigprocmask" value="126"/>
- <label name="create_module" value="127"/>
- <label name="init_module" value="128"/>
- <label name="delete_module" value="129"/>
- <label name="get_kernel_syms" value="130"/>
- <label name="quotactl" value="131"/>
- <label name="getpgid" value="132"/>
- <label name="fchdir" value="133"/>
- <label name="bdflush" value="134"/>
- <label name="sysfs" value="135"/>
- <label name="personality" value="136"/>
- <label name="afs_syscall" value="137"/>
- <label name="setfsuid" value="138"/>
- <label name="setfsgid" value="139"/>
- <label name="_llseek" value="140"/>
- <label name="getdents" value="141"/>
- <label name="_newselect" value="142"/>
- <label name="flock" value="143"/>
- <label name="msync" value="144"/>
- <label name="readv" value="145"/>
- <label name="writev" value="146"/>
- <label name="getsid" value="147"/>
- <label name="fdatasync" value="148"/>
- <label name="_sysctl" value="149"/>
- <label name="mlock" value="150"/>
- <label name="munlock" value="151"/>
- <label name="mlockall" value="152"/>
- <label name="munlockall" value="153"/>
- <label name="sched_setparam" value="154"/>
- <label name="sched_getparam" value="155"/>
- <label name="sched_setscheduler" value="156"/>
- <label name="sched_getscheduler" value="157"/>
- <label name="sched_yield" value="158"/>
- <label name="sched_get_priority_max" value="159"/>
- <label name="sched_get_priority_min" value="160"/>
- <label name="sched_rr_get_interval" value="161"/>
- <label name="nanosleep" value="162"/>
- <label name="mremap" value="163"/>
- <label name="setresuid" value="164"/>
- <label name="getresuid" value="165"/>
- <label name="query_module" value="166"/>
- <label name="poll" value="167"/>
- <label name="nfsservctl" value="168"/>
- <label name="setresgid" value="169"/>
- <label name="getresgid" value="170"/>
- <label name="prctl" value="171"/>
- <label name="rt_sigreturn" value="172"/>
- <label name="rt_sigaction" value="173"/>
- <label name="rt_sigprocmask" value="174"/>
- <label name="rt_sigpending" value="175"/>
- <label name="rt_sigtimedwait" value="176"/>
- <label name="rt_sigqueueinfo" value="177"/>
- <label name="rt_sigsuspend" value="178"/>
- <label name="pread64" value="179"/>
- <label name="pwrite64" value="180"/>
- <label name="chown" value="181"/>
- <label name="getcwd" value="182"/>
- <label name="capget" value="183"/>
- <label name="capset" value="184"/>
- <label name="sigaltstack" value="185"/>
- <label name="sendfile" value="186"/>
- <label name="getpmsg" value="187"/>
- <label name="putpmsg" value="188"/>
- <label name="vfork" value="189"/>
- <label name="ugetrlimit" value="190"/>
- <label name="readahead" value="191"/>
- <label name="mmap2" value="192"/>
- <label name="truncate64" value="193"/>
- <label name="ftruncate64" value="194"/>
- <label name="stat64" value="195"/>
- <label name="lstat64" value="196"/>
- <label name="fstat64" value="197"/>
- <label name="pciconfig_read" value="198"/>
- <label name="pciconfig_write" value="199"/>
- <label name="pciconfig_iobase" value="200"/>
- <label name="multiplexer" value="201"/>
- <label name="getdents64" value="202"/>
- <label name="pivot_root" value="203"/>
- <label name="fcntl64" value="204"/>
- <label name="madvise" value="205"/>
- <label name="mincore" value="206"/>
- <label name="gettid" value="207"/>
- <label name="tkill" value="208"/>
- <label name="setxattr" value="209"/>
- <label name="lsetxattr" value="210"/>
- <label name="fsetxattr" value="211"/>
- <label name="getxattr" value="212"/>
- <label name="lgetxattr" value="213"/>
- <label name="fgetxattr" value="214"/>
- <label name="listxattr" value="215"/>
- <label name="llistxattr" value="216"/>
- <label name="flistxattr" value="217"/>
- <label name="removexattr" value="218"/>
- <label name="lremovexattr" value="219"/>
- <label name="fremovexattr" value="220"/>
- <label name="futex" value="221"/>
- <label name="sched_setaffinity" value="222"/>
- <label name="sched_getaffinity" value="223"/>
-
- <label name="tuxcall" value="225"/>
- <label name="sendfile64" value="226"/>
- <label name="io_setup" value="227"/>
- <label name="io_destroy" value="228"/>
- <label name="io_getevents" value="229"/>
- <label name="io_submit" value="230"/>
- <label name="io_cancel" value="231"/>
- <label name="set_tid_address" value="232"/>
- <label name="fadvise64" value="233"/>
- <label name="exit_group" value="234"/>
- <label name="lookup_dcookie" value="235"/>
- <label name="epoll_create" value="236"/>
- <label name="epoll_ctl" value="237"/>
- <label name="epoll_wait" value="238"/>
- <label name="remap_file_pages" value="239"/>
- <label name="timer_create" value="240"/>
- <label name="timer_settime" value="241"/>
- <label name="timer_gettime" value="242"/>
- <label name="timer_getoverrun" value="243"/>
- <label name="timer_delete" value="244"/>
- <label name="clock_settime" value="245"/>
- <label name="clock_gettime" value="246"/>
- <label name="clock_getres" value="247"/>
- <label name="clock_nanosleep" value="248"/>
- <label name="swapcontext" value="249"/>
- <label name="tgkill" value="250"/>
- <label name="utimes" value="251"/>
- <label name="statfs64" value="252"/>
- <label name="fstatfs64" value="253"/>
- <label name="fadvise64_64" value="254"/>
- <label name="rtas" value="255"/>
- <label name="sys_debug_setcontext" value="256"/>
-
-
- <label name="mbind" value="259"/>
- <label name="get_mempolicy" value="260"/>
- <label name="set_mempolicy" value="261"/>
- <label name="mq_open" value="262"/>
- <label name="mq_unlink" value="263"/>
- <label name="mq_timedsend" value="264"/>
- <label name="mq_timedreceive" value="265"/>
- <label name="mq_notify" value="266"/>
- <label name="mq_getsetattr" value="267"/>
- <label name="kexec_load" value="268"/>
- <label name="add_key" value="269"/>
- <label name="request_key" value="270"/>
- <label name="keyctl" value="271"/>
- <label name="waitid" value="272"/>
- <label name="ioprio_set" value="273"/>
- <label name="ioprio_get" value="274"/>
- <label name="inotify_init" value="275"/>
- <label name="inotify_add_watch" value="276"/>
- <label name="inotify_rm_watch" value="277"/>
- <label name="spu_run" value="278"/>
- <label name="spu_create" value="279"/>
- <label name="pselect6" value="280"/>
- <label name="ppoll" value="281"/>
- <label name="unshare" value="282"/>
- <label name="splice" value="283"/>
- <label name="tee" value="284"/>
- <label name="vmsplice" value="285"/>
- <label name="openat" value="286"/>
- <label name="mkdirat" value="287"/>
- <label name="mknodat" value="288"/>
- <label name="fchownat" value="289"/>
- <label name="futimesat" value="290"/>
- <label name="fstatat64" value="291"/>
- <label name="unlinkat" value="292"/>
- <label name="renameat" value="293"/>
- <label name="linkat" value="294"/>
- <label name="symlinkat" value="295"/>
- <label name="readlinkat" value="296"/>
- <label name="fchmodat" value="297"/>
- <label name="faccessat" value="298"/>
- <label name="get_robust_list" value="299"/>
- <label name="set_robust_list" value="300"/>
- <label name="ltt_trace_generic" value="301"/>
- <label name="ltt_register_generic" value="302"/>
- </enum>
- </type>
-
- <event name="syscall_entry">
- <description>System call entry</description>
- <field name="syscall_id"> <description>Syscall entry number in entry.S</description> <typeref name="syscall_name"/> </field>
- <field name="address"> <description>Address from which call was made</description> <pointer/> </field>
- </event>
-
- <event name="syscall_exit">
- <description>System call exit</description>
- </event>
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="kernel_arch" arch="ppc">
- <description>The kernel facility has events related to kernel execution status for the ppc architecture.</description>
- <type name="syscall_name">
- <enum>
- <label name="restart_syscall" value="0"/>
- <label name="exit" value="1"/>
- <label name="fork" value="2"/>
- <label name="read" value="3"/>
- <label name="write" value="4"/>
- <label name="open" value="5"/>
- <label name="close" value="6"/>
- <label name="waitpid" value="7"/>
- <label name="creat" value="8"/>
- <label name="link" value="9"/>
- <label name="unlink" value="10"/>
- <label name="execve" value="11"/>
- <label name="chdir" value="12"/>
- <label name="time" value="13"/>
- <label name="mknod" value="14"/>
- <label name="chmod" value="15"/>
- <label name="lchown" value="16"/>
- <label name="break" value="17"/>
- <label name="oldstat" value="18"/>
- <label name="lseek" value="19"/>
- <label name="getpid" value="20"/>
- <label name="mount" value="21"/>
- <label name="umount" value="22"/>
- <label name="setuid" value="23"/>
- <label name="getuid" value="24"/>
- <label name="stime" value="25"/>
- <label name="ptrace" value="26"/>
- <label name="alarm" value="27"/>
- <label name="oldfstat" value="28"/>
- <label name="pause" value="29"/>
- <label name="utime" value="30"/>
- <label name="stty" value="31"/>
- <label name="gtty" value="32"/>
- <label name="access" value="33"/>
- <label name="nice" value="34"/>
- <label name="ftime" value="35"/>
- <label name="sync" value="36"/>
- <label name="kill" value="37"/>
- <label name="rename" value="38"/>
- <label name="mkdir" value="39"/>
- <label name="rmdir" value="40"/>
- <label name="dup" value="41"/>
- <label name="pipe" value="42"/>
- <label name="times" value="43"/>
- <label name="prof" value="44"/>
- <label name="brk" value="45"/>
- <label name="setgid" value="46"/>
- <label name="getgid" value="47"/>
- <label name="signal" value="48"/>
- <label name="geteuid" value="49"/>
- <label name="getegid" value="50"/>
- <label name="acct" value="51"/>
- <label name="umount2" value="52"/>
- <label name="lock" value="53"/>
- <label name="ioctl" value="54"/>
- <label name="fcntl" value="55"/>
- <label name="mpx" value="56"/>
- <label name="setpgid" value="57"/>
- <label name="ulimit" value="58"/>
- <label name="oldolduname" value="59"/>
- <label name="umask" value="60"/>
- <label name="chroot" value="61"/>
- <label name="ustat" value="62"/>
- <label name="dup2" value="63"/>
- <label name="getppid" value="64"/>
- <label name="getpgrp" value="65"/>
- <label name="setsid" value="66"/>
- <label name="sigaction" value="67"/>
- <label name="sgetmask" value="68"/>
- <label name="ssetmask" value="69"/>
- <label name="setreuid" value="70"/>
- <label name="setregid" value="71"/>
- <label name="sigsuspend" value="72"/>
- <label name="sigpending" value="73"/>
- <label name="sethostname" value="74"/>
- <label name="setrlimit" value="75"/>
- <label name="getrlimit" value="76"/>
- <label name="getrusage" value="77"/>
- <label name="gettimeofday" value="78"/>
- <label name="settimeofday" value="79"/>
- <label name="getgroups" value="80"/>
- <label name="setgroups" value="81"/>
- <label name="select" value="82"/>
- <label name="symlink" value="83"/>
- <label name="oldlstat" value="84"/>
- <label name="readlink" value="85"/>
- <label name="uselib" value="86"/>
- <label name="swapon" value="87"/>
- <label name="reboot" value="88"/>
- <label name="readdir" value="89"/>
- <label name="mmap" value="90"/>
- <label name="munmap" value="91"/>
- <label name="truncate" value="92"/>
- <label name="ftruncate" value="93"/>
- <label name="fchmod" value="94"/>
- <label name="fchown" value="95"/>
- <label name="getpriority" value="96"/>
- <label name="setpriority" value="97"/>
- <label name="profil" value="98"/>
- <label name="statfs" value="99"/>
- <label name="fstatfs" value="100"/>
- <label name="ioperm" value="101"/>
- <label name="socketcall" value="102"/>
- <label name="syslog" value="103"/>
- <label name="setitimer" value="104"/>
- <label name="getitimer" value="105"/>
- <label name="stat" value="106"/>
- <label name="lstat" value="107"/>
- <label name="fstat" value="108"/>
- <label name="olduname" value="109"/>
- <label name="iopl" value="110"/>
- <label name="vhangup" value="111"/>
- <label name="idle" value="112"/>
- <label name="vm86" value="113"/>
- <label name="wait4" value="114"/>
- <label name="swapoff" value="115"/>
- <label name="sysinfo" value="116"/>
- <label name="ipc" value="117"/>
- <label name="fsync" value="118"/>
- <label name="sigreturn" value="119"/>
- <label name="clone" value="120"/>
- <label name="setdomainname" value="121"/>
- <label name="uname" value="122"/>
- <label name="modify_ldt" value="123"/>
- <label name="adjtimex" value="124"/>
- <label name="mprotect" value="125"/>
- <label name="sigprocmask" value="126"/>
- <label name="create_module" value="127"/>
- <label name="init_module" value="128"/>
- <label name="delete_module" value="129"/>
- <label name="get_kernel_syms" value="130"/>
- <label name="quotactl" value="131"/>
- <label name="getpgid" value="132"/>
- <label name="fchdir" value="133"/>
- <label name="bdflush" value="134"/>
- <label name="sysfs" value="135"/>
- <label name="personality" value="136"/>
- <label name="afs_syscall" value="137"/>
- <label name="setfsuid" value="138"/>
- <label name="setfsgid" value="139"/>
- <label name="_llseek" value="140"/>
- <label name="getdents" value="141"/>
- <label name="_newselect" value="142"/>
- <label name="flock" value="143"/>
- <label name="msync" value="144"/>
- <label name="readv" value="145"/>
- <label name="writev" value="146"/>
- <label name="getsid" value="147"/>
- <label name="fdatasync" value="148"/>
- <label name="_sysctl" value="149"/>
- <label name="mlock" value="150"/>
- <label name="munlock" value="151"/>
- <label name="mlockall" value="152"/>
- <label name="munlockall" value="153"/>
- <label name="sched_setparam" value="154"/>
- <label name="sched_getparam" value="155"/>
- <label name="sched_setscheduler" value="156"/>
- <label name="sched_getscheduler" value="157"/>
- <label name="sched_yield" value="158"/>
- <label name="sched_get_priority_max" value="159"/>
- <label name="sched_get_priority_min" value="160"/>
- <label name="sched_rr_get_interval" value="161"/>
- <label name="nanosleep" value="162"/>
- <label name="mremap" value="163"/>
- <label name="setresuid" value="164"/>
- <label name="getresuid" value="165"/>
- <label name="query_module" value="166"/>
- <label name="poll" value="167"/>
- <label name="nfsservctl" value="168"/>
- <label name="setresgid" value="169"/>
- <label name="getresgid" value="170"/>
- <label name="prctl" value="171"/>
- <label name="rt_sigreturn" value="172"/>
- <label name="rt_sigaction" value="173"/>
- <label name="rt_sigprocmask" value="174"/>
- <label name="rt_sigpending" value="175"/>
- <label name="rt_sigtimedwait" value="176"/>
- <label name="rt_sigqueueinfo" value="177"/>
- <label name="rt_sigsuspend" value="178"/>
- <label name="pread64" value="179"/>
- <label name="pwrite64" value="180"/>
- <label name="chown" value="181"/>
- <label name="getcwd" value="182"/>
- <label name="capget" value="183"/>
- <label name="capset" value="184"/>
- <label name="sigaltstack" value="185"/>
- <label name="sendfile" value="186"/>
- <label name="getpmsg" value="187"/>
- <label name="putpmsg" value="188"/>
- <label name="vfork" value="189"/>
- <label name="ugetrlimit" value="190"/>
- <label name="readahead" value="191"/>
- <label name="mmap2" value="192"/>
- <label name="truncate64" value="193"/>
- <label name="ftruncate64" value="194"/>
- <label name="stat64" value="195"/>
- <label name="lstat64" value="196"/>
- <label name="fstat64" value="197"/>
- <label name="pciconfig_read" value="198"/>
- <label name="pciconfig_write" value="199"/>
- <label name="pciconfig_iobase" value="200"/>
- <label name="multiplexer" value="201"/>
- <label name="getdents64" value="202"/>
- <label name="pivot_root" value="203"/>
- <label name="fcntl64" value="204"/>
- <label name="madvise" value="205"/>
- <label name="mincore" value="206"/>
- <label name="gettid" value="207"/>
- <label name="tkill" value="208"/>
- <label name="setxattr" value="209"/>
- <label name="lsetxattr" value="210"/>
- <label name="fsetxattr" value="211"/>
- <label name="getxattr" value="212"/>
- <label name="lgetxattr" value="213"/>
- <label name="fgetxattr" value="214"/>
- <label name="listxattr" value="215"/>
- <label name="llistxattr" value="216"/>
- <label name="flistxattr" value="217"/>
- <label name="removexattr" value="218"/>
- <label name="lremovexattr" value="219"/>
- <label name="fremovexattr" value="220"/>
- <label name="futex" value="221"/>
- <label name="sched_setaffinity" value="222"/>
- <label name="sched_getaffinity" value="223"/>
-
- <label name="tuxcall" value="225"/>
- <label name="sendfile64" value="226"/>
- <label name="io_setup" value="227"/>
- <label name="io_destroy" value="228"/>
- <label name="io_getevents" value="229"/>
- <label name="io_submit" value="230"/>
- <label name="io_cancel" value="231"/>
- <label name="set_tid_address" value="232"/>
- <label name="fadvise64" value="233"/>
- <label name="exit_group" value="234"/>
- <label name="lookup_dcookie" value="235"/>
- <label name="epoll_create" value="236"/>
- <label name="epoll_ctl" value="237"/>
- <label name="epoll_wait" value="238"/>
- <label name="remap_file_pages" value="239"/>
- <label name="timer_create" value="240"/>
- <label name="timer_settime" value="241"/>
- <label name="timer_gettime" value="242"/>
- <label name="timer_getoverrun" value="243"/>
- <label name="timer_delete" value="244"/>
- <label name="clock_settime" value="245"/>
- <label name="clock_gettime" value="246"/>
- <label name="clock_getres" value="247"/>
- <label name="clock_nanosleep" value="248"/>
- <label name="swapcontext" value="249"/>
- <label name="tgkill" value="250"/>
- <label name="utimes" value="251"/>
- <label name="statfs64" value="252"/>
- <label name="fstatfs64" value="253"/>
- <label name="fadvise64_64" value="254"/>
- <label name="rtas" value="255"/>
- <label name="sys_debug_setcontext" value="256"/>
-
-
- <label name="mbind" value="259"/>
- <label name="get_mempolicy" value="260"/>
- <label name="set_mempolicy" value="261"/>
- <label name="mq_open" value="262"/>
- <label name="mq_unlink" value="263"/>
- <label name="mq_timedsend" value="264"/>
- <label name="mq_timedreceive" value="265"/>
- <label name="mq_notify" value="266"/>
- <label name="mq_getsetattr" value="267"/>
- <label name="kexec_load" value="268"/>
- <label name="add_key" value="269"/>
- <label name="request_key" value="270"/>
- <label name="keyctl" value="271"/>
- <label name="waitid" value="272"/>
- <label name="ioprio_set" value="273"/>
- <label name="ioprio_get" value="274"/>
- <label name="inotify_init" value="275"/>
- <label name="inotify_add_watch" value="276"/>
- <label name="inotify_rm_watch" value="277"/>
- <label name="spu_run" value="278"/>
- <label name="spu_create" value="279"/>
- <label name="pselect6" value="280"/>
- <label name="ppoll" value="281"/>
- <label name="unshare" value="282"/>
- <label name="splice" value="283"/>
- <label name="tee" value="284"/>
- <label name="vmsplice" value="285"/>
- <label name="openat" value="286"/>
- <label name="mkdirat" value="287"/>
- <label name="mknodat" value="288"/>
- <label name="fchownat" value="289"/>
- <label name="futimesat" value="290"/>
- <label name="fstatat64" value="291"/>
- <label name="unlinkat" value="292"/>
- <label name="renameat" value="293"/>
- <label name="linkat" value="294"/>
- <label name="symlinkat" value="295"/>
- <label name="readlinkat" value="296"/>
- <label name="fchmodat" value="297"/>
- <label name="faccessat" value="298"/>
- <label name="get_robust_list" value="299"/>
- <label name="set_robust_list" value="300"/>
- <label name="ltt_trace_generic" value="301"/>
- <label name="ltt_register_generic" value="302"/>
- </enum>
- </type>
-
- <event name="syscall_entry">
- <description>System call entry</description>
- <field name="syscall_id"> <description>Syscall entry number in entry.S</description> <typeref name="syscall_name"/> </field>
- <field name="address"> <description>Address from which call was made</description> <pointer/> </field>
- </event>
-
- <event name="syscall_exit">
- <description>System call exit</description>
- </event>
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="kernel_arch" arch="x86_64">
- <description>The kernel facility has events related to kernel execution status for the x86_64 architecture.</description>
- <type name="syscall_name">
- <enum>
- <label name="read" value="0"/>
- <label name="write" value="1"/>
- <label name="open" value="2"/>
- <label name="close" value="3"/>
- <label name="stat" value="4"/>
- <label name="fstat" value="5"/>
- <label name="lstat" value="6"/>
- <label name="poll" value="7"/>
- <label name="lseek" value="8"/>
- <label name="mmap" value="9"/>
- <label name="mprotect" value="10"/>
- <label name="munmap" value="11"/>
- <label name="brk" value="12"/>
- <label name="rt_sigaction" value="13"/>
- <label name="rt_sigprocmask" value="14"/>
- <label name="rt_sigreturn" value="15"/>
- <label name="ioctl" value="16"/>
- <label name="pread64" value="17"/>
- <label name="pwrite64" value="18"/>
- <label name="readv" value="19"/>
- <label name="writev" value="20"/>
- <label name="access" value="21"/>
- <label name="pipe" value="22"/>
- <label name="select" value="23"/>
- <label name="sched_yield" value="24"/>
- <label name="mremap" value="25"/>
- <label name="msync" value="26"/>
- <label name="mincore" value="27"/>
- <label name="madvise" value="28"/>
- <label name="shmget" value="29"/>
- <label name="shmat" value="30"/>
- <label name="shmctl" value="31"/>
- <label name="dup" value="32"/>
- <label name="dup2" value="33"/>
- <label name="pause" value="34"/>
- <label name="nanosleep" value="35"/>
- <label name="getitimer" value="36"/>
- <label name="alarm" value="37"/>
- <label name="setitimer" value="38"/>
- <label name="getpid" value="39"/>
- <label name="sendfile" value="40"/>
- <label name="socket" value="41"/>
- <label name="connect" value="42"/>
- <label name="accept" value="43"/>
- <label name="sendto" value="44"/>
- <label name="recvfrom" value="45"/>
- <label name="sendmsg" value="46"/>
- <label name="recvmsg" value="47"/>
- <label name="shutdown" value="48"/>
- <label name="bind" value="49"/>
- <label name="listen" value="50"/>
- <label name="getsockname" value="51"/>
- <label name="getpeername" value="52"/>
- <label name="socketpair" value="53"/>
- <label name="setsockopt" value="54"/>
- <label name="getsockopt" value="55"/>
- <label name="clone" value="56"/>
- <label name="fork" value="57"/>
- <label name="vfork" value="58"/>
- <label name="execve" value="59"/>
- <label name="exit" value="60"/>
- <label name="wait4" value="61"/>
- <label name="kill" value="62"/>
- <label name="uname" value="63"/>
- <label name="semget" value="64"/>
- <label name="semop" value="65"/>
- <label name="semctl" value="66"/>
- <label name="shmdt" value="67"/>
- <label name="msgget" value="68"/>
- <label name="msgsnd" value="69"/>
- <label name="msgrcv" value="70"/>
- <label name="msgctl" value="71"/>
- <label name="fcntl" value="72"/>
- <label name="flock" value="73"/>
- <label name="fsync" value="74"/>
- <label name="fdatasync" value="75"/>
- <label name="truncate" value="76"/>
- <label name="ftruncate" value="77"/>
- <label name="getdents" value="78"/>
- <label name="getcwd" value="79"/>
- <label name="chdir" value="80"/>
- <label name="fchdir" value="81"/>
- <label name="rename" value="82"/>
- <label name="mkdir" value="83"/>
- <label name="rmdir" value="84"/>
- <label name="creat" value="85"/>
- <label name="link" value="86"/>
- <label name="unlink" value="87"/>
- <label name="symlink" value="88"/>
- <label name="readlink" value="89"/>
- <label name="chmod" value="90"/>
- <label name="fchmod" value="91"/>
- <label name="chown" value="92"/>
- <label name="fchown" value="93"/>
- <label name="lchown" value="94"/>
- <label name="umask" value="95"/>
- <label name="gettimeofday" value="96"/>
- <label name="getrlimit" value="97"/>
- <label name="getrusage" value="98"/>
- <label name="sysinfo" value="99"/>
- <label name="times" value="100"/>
- <label name="ptrace" value="101"/>
- <label name="getuid" value="102"/>
- <label name="syslog" value="103"/>
- <label name="getgid" value="104"/>
- <label name="setuid" value="105"/>
- <label name="setgid" value="106"/>
- <label name="geteuid" value="107"/>
- <label name="getegid" value="108"/>
- <label name="setpgid" value="109"/>
- <label name="getppid" value="110"/>
- <label name="getpgrp" value="111"/>
- <label name="setsid" value="112"/>
- <label name="setreuid" value="113"/>
- <label name="setregid" value="114"/>
- <label name="getgroups" value="115"/>
- <label name="setgroups" value="116"/>
- <label name="setresuid" value="117"/>
- <label name="getresuid" value="118"/>
- <label name="setresgid" value="119"/>
- <label name="getresgid" value="120"/>
- <label name="getpgid" value="121"/>
- <label name="setfsuid" value="122"/>
- <label name="setfsgid" value="123"/>
- <label name="getsid" value="124"/>
- <label name="capget" value="125"/>
- <label name="capset" value="126"/>
- <label name="rt_sigpending" value="127"/>
- <label name="rt_sigtimedwait" value="128"/>
- <label name="rt_sigqueueinfo" value="129"/>
- <label name="rt_sigsuspend" value="130"/>
- <label name="sigaltstack" value="131"/>
- <label name="utime" value="132"/>
- <label name="mknod" value="133"/>
- <label name="uselib_NOT_IMPLEMENTED" value="134"/>
- <label name="personality" value="135"/>
- <label name="ustat" value="136"/>
- <label name="statfs" value="137"/>
- <label name="fstatfs" value="138"/>
- <label name="sysfs" value="139"/>
- <label name="getpriority" value="140"/>
- <label name="setpriority" value="141"/>
- <label name="sched_setparam" value="142"/>
- <label name="sched_getparam" value="143"/>
- <label name="sched_setscheduler" value="144"/>
- <label name="sched_getscheduler" value="145"/>
- <label name="sched_get_priority_max" value="146"/>
- <label name="sched_get_priority_min" value="147"/>
- <label name="sched_rr_get_interval" value="148"/>
- <label name="mlock" value="149"/>
- <label name="munlock" value="150"/>
- <label name="mlockall" value="151"/>
- <label name="munlockall" value="152"/>
- <label name="vhangup" value="153"/>
- <label name="modify_ldt" value="154"/>
- <label name="pivot_root" value="155"/>
- <label name="_sysctl" value="156"/>
- <label name="prctl" value="157"/>
- <label name="arch_prctl" value="158"/>
- <label name="adjtimex" value="159"/>
- <label name="setrlimit" value="160"/>
- <label name="chroot" value="161"/>
- <label name="sync" value="162"/>
- <label name="acct" value="163"/>
- <label name="settimeofday" value="164"/>
- <label name="mount" value="165"/>
- <label name="umount2" value="166"/>
- <label name="swapon" value="167"/>
- <label name="swapoff" value="168"/>
- <label name="reboot" value="169"/>
- <label name="sethostname" value="170"/>
- <label name="setdomainname" value="171"/>
- <label name="iopl" value="172"/>
- <label name="ioperm" value="173"/>
- <label name="create_module_NOT_IMPLEMENTED" value="174"/>
- <label name="init_module" value="175"/>
- <label name="delete_module" value="176"/>
- <label name="get_kernel_syms_NOT_IMPLEMENTED" value="177"/>
- <label name="query_module_NOT_IMPLEMENTED" value="178"/>
- <label name="quotactl" value="179"/>
- <label name="nfsservctl" value="180"/>
- <label name="getpmsg_NOT_IMPLEMENTED" value="181"/>
- <label name="putpmsg_NOT_IMPLEMENTED" value="182"/>
- <label name="afs_syscall_NOT_IMPLEMENTED" value="183"/>
- <label name="tuxcall_NOT_IMPLEMENTED" value="184"/>
- <label name="security_NOT_IMPLEMENTED" value="185"/>
- <label name="gettid" value="186"/>
- <label name="readahead" value="187"/>
- <label name="setxattr" value="188"/>
- <label name="lsetxattr" value="189"/>
- <label name="fsetxattr" value="190"/>
- <label name="getxattr" value="191"/>
- <label name="lgetxattr" value="192"/>
- <label name="fgetxattr" value="193"/>
- <label name="listxattr" value="194"/>
- <label name="llistxattr" value="195"/>
- <label name="flistxattr" value="196"/>
- <label name="removexattr" value="197"/>
- <label name="lremovexattr" value="198"/>
- <label name="fremovexattr" value="199"/>
- <label name="tkill" value="200"/>
- <label name="time" value="201"/>
- <label name="futex" value="202"/>
- <label name="sched_setaffinity" value="203"/>
- <label name="sched_getaffinity" value="204"/>
- <label name="set_thread_area_NOT_IMPLEMENTED" value="205"/>
- <label name="io_setup" value="206"/>
- <label name="io_destroy" value="207"/>
- <label name="io_getevents" value="208"/>
- <label name="io_submit" value="209"/>
- <label name="io_cancel" value="210"/>
- <label name="get_thread_area_NOT_IMPLEMENTED" value="211"/>
- <label name="lookup_dcookie" value="212"/>
- <label name="epoll_create" value="213"/>
- <label name="epoll_ctl_old_NOT_IMPLEMENTED" value="214"/>
- <label name="epoll_wait_old_NOT_IMPLEMENTED" value="215"/>
- <label name="remap_file_pages" value="216"/>
- <label name="getdents64" value="217"/>
- <label name="set_tid_address" value="218"/>
- <label name="restart_syscall" value="219"/>
- <label name="semtimedop" value="220"/>
- <label name="fadvise64" value="221"/>
- <label name="timer_create" value="222"/>
- <label name="timer_settime" value="223"/>
- <label name="timer_gettime" value="224"/>
- <label name="timer_getoverrun" value="225"/>
- <label name="timer_delete" value="226"/>
- <label name="clock_settime" value="227"/>
- <label name="clock_gettime" value="228"/>
- <label name="clock_getres" value="229"/>
- <label name="clock_nanosleep" value="230"/>
- <label name="exit_group" value="231"/>
- <label name="epoll_wait" value="232"/>
- <label name="epoll_ctl" value="233"/>
- <label name="tgkill" value="234"/>
- <label name="utimes" value="235"/>
- <label name="vserver_NOT_IMPLEMENTED" value="236"/>
- <label name="mbind" value="237"/>
- <label name="set_mempolicy" value="238"/>
- <label name="get_mempolicy" value="239"/>
- <label name="mq_open" value="240"/>
- <label name="mq_unlink" value="241"/>
- <label name="mq_timedsend" value="242"/>
- <label name="mq_timedreceive" value="243"/>
- <label name="mq_notify" value="244"/>
- <label name="mq_getsetattr" value="245"/>
- <label name="kexec_load" value="246"/>
- <label name="waitid" value="247"/>
- <label name="add_key" value="248"/>
- <label name="request_key" value="249"/>
- <label name="keyctl" value="250"/>
- <label name="ioprio_set" value="251"/>
- <label name="ioprio_get" value="252"/>
- <label name="inotify_init" value="253"/>
- <label name="inotify_add_watch" value="254"/>
- <label name="inotify_rm_watch" value="255"/>
- <label name="migrate_pages" value="256"/>
- <label name="openat" value="257"/>
- <label name="mkdirat" value="258"/>
- <label name="mknodat" value="259"/>
- <label name="fchownat" value="260"/>
- <label name="futimesat" value="261"/>
- <label name="newfstatat" value="262"/>
- <label name="unlinkat" value="263"/>
- <label name="renameat" value="264"/>
- <label name="linkat" value="265"/>
- <label name="symlinkat" value="266"/>
- <label name="readlinkat" value="267"/>
- <label name="fchmodat" value="268"/>
- <label name="faccessat" value="269"/>
- <label name="pselect6_NOT_IMPLEMENTED" value="270"/>
- <label name="ppoll_NOT_IMPLEMENTED" value="271"/>
- <label name="unshare" value="272"/>
- <label name="set_robust_list" value="273"/>
- <label name="get_robust_list" value="274"/>
- <label name="splice" value="275"/>
- <label name="tee" value="276"/>
- <label name="sync_file_range" value="277"/>
- <label name="vmsplice" value="278"/>
- <label name="ltt_trace_generic" value="279"/>
- <label name="ltt_register_generic" value="280"/>
-
-
- <label name="ia32_restart_syscall" value="5000"/>
- <label name="ia32_exit" value="5001"/>
- <label name="ia32_fork" value="5002"/>
- <label name="ia32_read" value="5003"/>
- <label name="ia32_write" value="5004"/>
- <label name="ia32_open" value="5005"/>
- <label name="ia32_close" value="5006"/>
- <label name="ia32_waitpid" value="5007"/>
- <label name="ia32_creat" value="5008"/>
- <label name="ia32_link" value="5009"/>
- <label name="ia32_unlink" value="5010"/>
- <label name="ia32_execve" value="5011"/>
- <label name="ia32_chdir" value="5012"/>
- <label name="ia32_time" value="5013"/>
- <label name="ia32_mknod" value="5014"/>
- <label name="ia32_chmod" value="5015"/>
- <label name="ia32_lchown" value="5016"/>
- <label name="ia32_break_NOT_IMPLEMENTED" value="5017"/>
- <label name="ia32_oldstat" value="5018"/>
- <label name="ia32_lseek" value="5019"/>
- <label name="ia32_getpid" value="5020"/>
- <label name="ia32_mount" value="5021"/>
- <label name="ia32_umount" value="5022"/>
- <label name="ia32_setuid" value="5023"/>
- <label name="ia32_getuid" value="5024"/>
- <label name="ia32_stime" value="5025"/>
- <label name="ia32_ptrace" value="5026"/>
- <label name="ia32_alarm" value="5027"/>
- <label name="ia32_oldfstat" value="5028"/>
- <label name="ia32_pause" value="5029"/>
- <label name="ia32_utime" value="5030"/>
- <label name="ia32_stty_NOT_IMPLEMENTED" value="5031"/>
- <label name="ia32_gtty_NOT_IMPLEMENTED" value="5032"/>
- <label name="ia32_access" value="5033"/>
- <label name="ia32_nice" value="5034"/>
- <label name="ia32_ftime_NOT_IMPLEMENTED" value="5035"/>
- <label name="ia32_sync" value="5036"/>
- <label name="ia32_kill" value="5037"/>
- <label name="ia32_rename" value="5038"/>
- <label name="ia32_mkdir" value="5039"/>
- <label name="ia32_rmdir" value="5040"/>
- <label name="ia32_dup" value="5041"/>
- <label name="ia32_pipe" value="5042"/>
- <label name="ia32_times" value="5043"/>
- <label name="ia32_prof_NOT_IMPLEMENTED" value="5044"/>
- <label name="ia32_brk" value="5045"/>
- <label name="ia32_setgid" value="5046"/>
- <label name="ia32_getgid" value="5047"/>
- <label name="ia32_signal" value="5048"/>
- <label name="ia32_geteuid" value="5049"/>
- <label name="ia32_getegid" value="5050"/>
- <label name="ia32_acct" value="5051"/>
- <label name="ia32_umount2" value="5052"/>
- <label name="ia32_lock_NOT_IMPLEMENTED" value="5053"/>
- <label name="ia32_ioctl" value="5054"/>
- <label name="ia32_fcntl" value="5055"/>
- <label name="ia32_mpx_NOT_IMPLEMENTED" value="5056"/>
- <label name="ia32_setpgid" value="5057"/>
- <label name="ia32_ulimit_NOT_IMPLEMENTED" value="5058"/>
- <label name="ia32_oldolduname" value="5059"/>
- <label name="ia32_umask" value="5060"/>
- <label name="ia32_chroot" value="5061"/>
- <label name="ia32_ustat" value="5062"/>
- <label name="ia32_dup2" value="5063"/>
- <label name="ia32_getppid" value="5064"/>
- <label name="ia32_getpgrp" value="5065"/>
- <label name="ia32_setsid" value="5066"/>
- <label name="ia32_sigaction" value="5067"/>
- <label name="ia32_sgetmask" value="5068"/>
- <label name="ia32_ssetmask" value="5069"/>
- <label name="ia32_setreuid" value="5070"/>
- <label name="ia32_setregid" value="5071"/>
- <label name="ia32_sigsuspend" value="5072"/>
- <label name="ia32_sigpending" value="5073"/>
- <label name="ia32_sethostname" value="5074"/>
- <label name="ia32_setrlimit" value="5075"/>
- <label name="ia32_getrlimit" value="5076"/>
- <label name="ia32_getrusage" value="5077"/>
- <label name="ia32_gettimeofday" value="5078"/>
- <label name="ia32_settimeofday" value="5079"/>
- <label name="ia32_getgroups" value="5080"/>
- <label name="ia32_setgroups" value="5081"/>
- <label name="ia32_select" value="5082"/>
- <label name="ia32_symlink" value="5083"/>
- <label name="ia32_oldlstat" value="5084"/>
- <label name="ia32_readlink" value="5085"/>
- <label name="ia32_uselib" value="5086"/>
- <label name="ia32_swapon" value="5087"/>
- <label name="ia32_reboot" value="5088"/>
- <label name="ia32_readdir" value="5089"/>
- <label name="ia32_mmap" value="5090"/>
- <label name="ia32_munmap" value="5091"/>
- <label name="ia32_truncate" value="5092"/>
- <label name="ia32_ftruncate" value="5093"/>
- <label name="ia32_fchmod" value="5094"/>
- <label name="ia32_fchown" value="5095"/>
- <label name="ia32_getpriority" value="5096"/>
- <label name="ia32_setpriority" value="5097"/>
- <label name="ia32_profil_NOT_IMPLEMENTED" value="5098"/>
- <label name="ia32_statfs" value="5099"/>
- <label name="ia32_fstatfs" value="5100"/>
- <label name="ia32_ioperm" value="5101"/>
- <label name="ia32_socketcall" value="5102"/>
- <label name="ia32_syslog" value="5103"/>
- <label name="ia32_setitimer" value="5104"/>
- <label name="ia32_getitimer" value="5105"/>
- <label name="ia32_stat" value="5106"/>
- <label name="ia32_lstat" value="5107"/>
- <label name="ia32_fstat" value="5108"/>
- <label name="ia32_olduname" value="5109"/>
- <label name="ia32_iopl" value="5110"/>
- <label name="ia32_vhangup" value="5111"/>
- <label name="ia32_idle_NOT_IMPLEMENTED" value="5112"/>
- <label name="ia32_vm86old" value="5113"/>
- <label name="ia32_wait4" value="5114"/>
- <label name="ia32_swapoff" value="5115"/>
- <label name="ia32_sysinfo" value="5116"/>
- <label name="ia32_ipc" value="5117"/>
- <label name="ia32_fsync" value="5118"/>
- <label name="ia32_sigreturn" value="5119"/>
- <label name="ia32_clone" value="5120"/>
- <label name="ia32_setdomainname" value="5121"/>
- <label name="ia32_uname" value="5122"/>
- <label name="ia32_modify_ldt" value="5123"/>
- <label name="ia32_adjtimex" value="5124"/>
- <label name="ia32_mprotect" value="5125"/>
- <label name="ia32_sigprocmask" value="5126"/>
- <label name="ia32_create_module_NOT_IMPLEMENTED" value="5127"/>
- <label name="ia32_init_module" value="5128"/>
- <label name="ia32_delete_module" value="5129"/>
- <label name="ia32_get_kernel_syms_NOT_IMPLEMENTED" value="5130"/>
- <label name="ia32_quotactl" value="5131"/>
- <label name="ia32_getpgid" value="5132"/>
- <label name="ia32_fchdir" value="5133"/>
- <label name="ia32_bdflush_NOT_IMPLEMENTED" value="5134"/>
- <label name="ia32_sysfs" value="5135"/>
- <label name="ia32_personality" value="5136"/>
- <label name="ia32_afs_syscall_NOT_IMPLEMENTED" value="5137"/>
- <label name="ia32_setfsuid" value="5138"/>
- <label name="ia32_setfsgid" value="5139"/>
- <label name="ia32__llseek" value="5140"/>
- <label name="ia32_getdents" value="5141"/>
- <label name="ia32__newselect" value="5142"/>
- <label name="ia32_flock" value="5143"/>
- <label name="ia32_msync" value="5144"/>
- <label name="ia32_readv" value="5145"/>
- <label name="ia32_writev" value="5146"/>
- <label name="ia32_getsid" value="5147"/>
- <label name="ia32_fdatasync" value="5148"/>
- <label name="ia32__sysctl" value="5149"/>
- <label name="ia32_mlock" value="5150"/>
- <label name="ia32_munlock" value="5151"/>
- <label name="ia32_mlockall" value="5152"/>
- <label name="ia32_munlockall" value="5153"/>
- <label name="ia32_sched_setparam" value="5154"/>
- <label name="ia32_sched_getparam" value="5155"/>
- <label name="ia32_sched_setscheduler" value="5156"/>
- <label name="ia32_sched_getscheduler" value="5157"/>
- <label name="ia32_sched_yield" value="5158"/>
- <label name="ia32_sched_get_priority_max" value="5159"/>
- <label name="ia32_sched_get_priority_min" value="5160"/>
- <label name="ia32_sched_rr_get_interval" value="5161"/>
- <label name="ia32_nanosleep" value="5162"/>
- <label name="ia32_mremap" value="5163"/>
- <label name="ia32_setresuid" value="5164"/>
- <label name="ia32_getresuid" value="5165"/>
- <label name="ia32_vm86" value="5166"/>
- <label name="ia32_query_module_NOT_IMPLEMENTED" value="5167"/>
- <label name="ia32_poll" value="5168"/>
- <label name="ia32_nfsservctl" value="5169"/>
- <label name="ia32_setresgid" value="5170"/>
- <label name="ia32_getresgid" value="5171"/>
- <label name="ia32_prctl" value="5172"/>
- <label name="ia32_rt_sigreturn" value="5173"/>
- <label name="ia32_rt_sigaction" value="5174"/>
- <label name="ia32_rt_sigprocmask" value="5175"/>
- <label name="ia32_rt_sigpending" value="5176"/>
- <label name="ia32_rt_sigtimedwait" value="5177"/>
- <label name="ia32_rt_sigqueueinfo" value="5178"/>
- <label name="ia32_rt_sigsuspend" value="5179"/>
- <label name="ia32_pread" value="5180"/>
- <label name="ia32_pwrite" value="5181"/>
- <label name="ia32_chown" value="5182"/>
- <label name="ia32_getcwd" value="5183"/>
- <label name="ia32_capget" value="5184"/>
- <label name="ia32_capset" value="5185"/>
- <label name="ia32_sigaltstack" value="5186"/>
- <label name="ia32_sendfile" value="5187"/>
- <label name="ia32_getpmsg_NOT_IMPLEMENTED" value="5188"/>
- <label name="ia32_putpmsg_NOT_IMPLEMENTED" value="5189"/>
- <label name="ia32_vfork" value="5190"/>
- <label name="ia32_ugetrlimit" value="5191"/>
- <label name="ia32_mmap2" value="5192"/>
- <label name="ia32_truncate64" value="5193"/>
- <label name="ia32_ftruncate64" value="5194"/>
- <label name="ia32_stat64" value="5195"/>
- <label name="ia32_lstat64" value="5196"/>
- <label name="ia32_fstat64" value="5197"/>
- <label name="ia32_lchown32" value="5198"/>
- <label name="ia32_getuid32" value="5199"/>
- <label name="ia32_getgid32" value="5200"/>
- <label name="ia32_geteuid32" value="5201"/>
- <label name="ia32_getegid32" value="5202"/>
- <label name="ia32_setreuid32" value="5203"/>
- <label name="ia32_setregid32" value="5204"/>
- <label name="ia32_getgroups32" value="5205"/>
- <label name="ia32_setgroups32" value="5206"/>
- <label name="ia32_fchown32" value="5207"/>
- <label name="ia32_setresuid32" value="5208"/>
- <label name="ia32_getresuid32" value="5209"/>
- <label name="ia32_setresgid32" value="5210"/>
- <label name="ia32_getresgid32" value="5211"/>
- <label name="ia32_chown32" value="5212"/>
- <label name="ia32_setuid32" value="5213"/>
- <label name="ia32_setgid32" value="5214"/>
- <label name="ia32_setfsuid32" value="5215"/>
- <label name="ia32_setfsgid32" value="5216"/>
- <label name="ia32_pivot_root" value="5217"/>
- <label name="ia32_mincore" value="5218"/>
- <label name="ia32_madvise" value="5219"/>
- <label name="ia32_madvise1" value="5219"/>
- <label name="ia32_getdents64" value="5220"/>
- <label name="ia32_fcntl64" value="5221"/>
- <label name="ia32_tuxcall_NOT_IMPLEMENTED" value="5222"/>
- <label name="ia32_security_NOT_IMPLEMENTED" value="5223"/>
- <label name="ia32_gettid" value="5224"/>
- <label name="ia32_readahead" value="5225"/>
- <label name="ia32_setxattr" value="5226"/>
- <label name="ia32_lsetxattr" value="5227"/>
- <label name="ia32_fsetxattr" value="5228"/>
- <label name="ia32_getxattr" value="5229"/>
- <label name="ia32_lgetxattr" value="5230"/>
- <label name="ia32_fgetxattr" value="5231"/>
- <label name="ia32_listxattr" value="5232"/>
- <label name="ia32_llistxattr" value="5233"/>
- <label name="ia32_flistxattr" value="5234"/>
- <label name="ia32_removexattr" value="5235"/>
- <label name="ia32_lremovexattr" value="5236"/>
- <label name="ia32_fremovexattr" value="5237"/>
- <label name="ia32_tkill" value="5238"/>
- <label name="ia32_sendfile64" value="5239"/>
- <label name="ia32_futex" value="5240"/>
- <label name="ia32_sched_setaffinity" value="5241"/>
- <label name="ia32_sched_getaffinity" value="5242"/>
- <label name="ia32_set_thread_area" value="5243"/>
- <label name="ia32_get_thread_area" value="5244"/>
- <label name="ia32_io_setup" value="5245"/>
- <label name="ia32_io_destroy" value="5246"/>
- <label name="ia32_io_getevents" value="5247"/>
- <label name="ia32_io_submit" value="5248"/>
- <label name="ia32_io_cancel" value="5249"/>
- <label name="ia32_fadvise64" value="5250"/>
- <label name="ia32_set_zone_reclaim_NOT_IMPLEMENTED" value="5251"/>
- <label name="ia32_exit_group" value="5252"/>
- <label name="ia32_lookup_dcookie" value="5253"/>
- <label name="ia32_sys_epoll_create" value="5254"/>
- <label name="ia32_sys_epoll_ctl" value="5255"/>
- <label name="ia32_sys_epoll_wait" value="5256"/>
- <label name="ia32_remap_file_pages" value="5257"/>
- <label name="ia32_set_tid_address" value="5258"/>
- <label name="ia32_timer_create" value="5259"/>
- <label name="ia32_timer_settime" value="5260"/>
- <label name="ia32_timer_gettime" value="5261"/>
- <label name="ia32_timer_getoverrun" value="5262"/>
- <label name="ia32_timer_delete" value="5263"/>
- <label name="ia32_clock_settime" value="5264"/>
- <label name="ia32_clock_gettime" value="5265"/>
- <label name="ia32_clock_getres" value="5266"/>
- <label name="ia32_clock_nanosleep" value="5267"/>
- <label name="ia32_statfs64" value="5268"/>
- <label name="ia32_fstatfs64" value="5269"/>
- <label name="ia32_tgkill" value="5270"/>
- <label name="ia32_utimes" value="5271"/>
- <label name="ia32_fadvise64_64" value="5272"/>
- <label name="ia32_vserver_NOT_IMPLEMENTED" value="5273"/>
- <label name="ia32_mbind" value="5274"/>
- <label name="ia32_get_mempolicy" value="5275"/>
- <label name="ia32_set_mempolicy" value="5276"/>
- <label name="ia32_mq_open " value="5277"/>
- <label name="ia32_mq_unlink" value="5278"/>
- <label name="ia32_mq_timedsend" value="5279"/>
- <label name="ia32_mq_timedreceive" value="5280"/>
- <label name="ia32_mq_notify" value="5281"/>
- <label name="ia32_mq_getsetattr" value="5282"/>
- <label name="ia32_kexec" value="5283"/>
- <label name="ia32_waitid" value="5284"/>
- <label name="ia32_sys_setaltroot_NOT_IMPLEMENTED" value="5285"/>
- <label name="ia32_add_key" value="5286"/>
- <label name="ia32_request_key" value="5287"/>
- <label name="ia32_keyctl" value="5288"/>
- <label name="ia32_ioprio_set" value="5289"/>
- <label name="ia32_ioprio_get" value="5290"/>
- <label name="ia32_inotify_init" value="5291"/>
- <label name="ia32_inotify_add_watch" value="5292"/>
- <label name="ia32_inotify_rm_watch" value="5293"/>
- <label name="ia32_migrate_pages" value="5294"/>
- <label name="ia32_openat" value="5295"/>
- <label name="ia32_mkdirat" value="5296"/>
- <label name="ia32_mknodat" value="5297"/>
- <label name="ia32_fchownat" value="5298"/>
- <label name="ia32_futimesat" value="5299"/>
- <label name="ia32_fstatat64" value="5300"/>
- <label name="ia32_unlinkat" value="5301"/>
- <label name="ia32_renameat" value="5302"/>
- <label name="ia32_linkat" value="5303"/>
- <label name="ia32_symlinkat" value="5304"/>
- <label name="ia32_readlinkat" value="5305"/>
- <label name="ia32_fchmodat" value="5306"/>
- <label name="ia32_faccessat" value="5307"/>
- <label name="ia32_pselect6_NOT_IMPLEMENTED" value="5308"/>
- <label name="ia32_ppoll_NOT_IMPLEMENTED" value="5309"/>
- <label name="ia32_unshare" value="5310"/>
- <label name="ia32_set_robust_list" value="5311"/>
- <label name="ia32_get_robust_list" value="5312"/>
- <label name="ia32_splice" value="5313"/>
- <label name="ia32_sync_file_range" value="5314"/>
- <label name="ia32_tee" value="5315"/>
- <label name="ia32_vmsplice" value="5316"/>
- <label name="ia32_ltt_trace_generic" value="5317"/>
- <label name="ia32_ltt_register_generic" value="5318"/>
- </enum>
- </type>
-
- <event name="syscall_entry">
- <description>System call entry</description>
- <field name="syscall_id"> <description>Syscall entry number in entry.S</description> <typeref name="syscall_name"/> </field>
- <field name="address"> <description>Address from which call was made</description> <pointer/> </field>
- </event>
-
- <event name="syscall_exit">
- <description>System call exit</description>
- </event>
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="locking">
- <description>The locking facility instruments the kernel locking.</description>
- <event name="spin_lock_wait">
- <description>Takes a spinlock</description>
- <field name="spinlock"> <description>Spinlock address</description> <pointer/> </field>
- </event>
-
- <event name="spin_lock_try">
- <description>Tries a spinlock</description>
- <field name="spinlock"> <description>Spinlock address</description> <pointer/> </field>
- </event>
-
- <event name="spin_lock_entry">
- <description>Get a spinlock</description>
- <field name="spinlock"> <description>Spinlock address</description> <pointer/> </field>
- </event>
-
- <event name="spin_lock_exit">
- <description>Releases a spinlock</description>
- <field name="spinlock"> <description>Spinlock address</description> <pointer/> </field>
- </event>
-
- <event name="irq_save">
- <description>Disable IRQ, saving state</description>
- <field name="EIP">
- <description>Instruction pointer where the irq_save is located.</description>
- <pointer/>
- </field>
- <field name="flags">
- <description>Saved IRQ state.</description>
- <ulong/>
- </field>
- </event>
-
- <event name="irq_restore">
- <description>Disable IRQ, saving state</description>
- <field name="EIP">
- <description>Instruction pointer where the irq_restore is located.</description>
- <pointer/>
- </field>
- <field name="flags">
- <description>Restored IRQ state.</description>
- <ulong/>
- </field>
- </event>
-
- <event name="irq_disable">
- <description>Disable IRQ</description>
- <field name="EIP">
- <description>Instruction pointer where the irq_disable is located.</description>
- <pointer/>
- </field>
- </event>
-
- <event name="irq_enable">
- <description>Disable IRQ</description>
- <field name="EIP">
- <description>Instruction pointer where the irq_enable is located.</description>
- <pointer/>
- </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="memory">
- <description>The memory facility has memory management events.</description>
-
- <event name="page_alloc">
- <description>Page allocation</description>
- <field name="order"> <description>Order of the page to allocate</description> <uint size="4"/> </field>
- <field name="address"> <description>Assigned page address, or 0 if failed.</description> <pointer/> </field>
- </event>
-
- <event name="page_free">
- <description>Page free</description>
- <field name="order"> <description>Order of the page to free</description> <uint size="4"/> </field>
- <field name="address"> <description>Address of the page to free.</description> <pointer/> </field>
- </event>
-
- <event name="swap_in">
- <description>Page swapped into memory</description>
- <field name="address"> <description>Address of the page to swap in.</description> <pointer/> </field>
- </event>
-
- <event name="swap_out">
- <description>Page swapped to disk</description>
- <field name="address"> <description>Address of the page to swap out.</description> <pointer/> </field>
- </event>
-
- <event name="page_wait_start">
- <description>Staring to wait for a page</description>
- <field name="address"> <description>Address of the page we wait for.</description> <pointer/> </field>
- </event>
-
- <event name="page_wait_end">
- <description>Ending wait for a page</description>
- <field name="address"> <description>Address of the page we wait for.</description> <pointer/> </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="network">
- <description>The network facility contains events related to low level network operations</description>
-
- <event name="packet_in">
- <description>A packet is arriving</description>
- <field name="skbuff"> <description>Socket buffer pointer : identify the socket buffer</description> <pointer/> </field>
- <field name="protocol"> <description>Protocol of the packet</description><uint_fixed size="2"/> </field>
- </event>
-
- <event name="packet_out">
- <description>We send a packet</description>
- <field name="skbuff"> <description>Socket buffer pointer : identify the socket buffer</description> <pointer/> </field>
- <field name="protocol"> <description>Protocol of the packet</description><uint_fixed size="2"/> </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="network_ip_interface">
- <description>Network IP interface status</description>
-
- <event name="dev_up">
- <description>IP interface up</description>
- <field name="name"> <description>Interface name</description><string/></field>
- <field name="addr"> <description>IP address</description> <uint size="4" byte_order="network"/> </field>
- </event>
-
- <event name="dev_down">
- <description>IP interface down</description>
- <field name="name"> <description>Interface name</description><string/></field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="process">
- <description>The process facility has events related to process handling in the kernel.</description>
-
- <type name="signal_name">
- <enum>
- <label name="SIGHUP" value="1"/> <description>Hangup (POSIX).</description>
- <label name="SIGINT" value="2"/> <description>Interrupt (ANSI).</description>
- <label name="SIGQUIT" value="3"/> <description>Quit (POSIX).</description>
- <label name="SIGILL" value="4"/> <description>Illegal instruction (ANSI).</description>
- <label name="SIGTRAP" value="5"/> <description>Trace trap (POSIX).</description>
- <label name="SIGABRT" value="6"/> <description>Abort (ANSI).</description>
- <label name="SIGBUS" value="7"/> <description>BUS error (4.2 BSD).</description>
- <label name="SIGFPE" value="8"/> <description>Floating-point exception (ANSI).</description>
- <label name="SIGKILL" value="9"/> <description>Kill, unblockable (POSIX).</description>
- <label name="SIGUSR1" value="10"/> <description>User-defined signal 1 (POSIX).</description>
- <label name="SIGSEGV" value="11"/> <description>Segmentation violation (ANSI).</description>
- <label name="SIGUSR2" value="12"/> <description>User-defined signal 2 (POSIX).</description>
- <label name="SIGPIPE" value="13"/> <description>Broken pipe (POSIX).</description>
- <label name="SIGALRM" value="14"/> <description>Alarm clock (POSIX).</description>
- <label name="SIGTERM" value="15"/> <description>Termination (ANSI).</description>
- <label name="SIGSTKFLT" value="16"/> <description>Stack fault.</description>
-
- <label name="SIGCHLD" value="17"/> <description>Child status has changed (POSIX).</description>
- <label name="SIGCONT" value="18"/> <description>Continue (POSIX).</description>
- <label name="SIGSTOP" value="19"/> <description>Stop, unblockable (POSIX).</description>
- <label name="SIGTSTP" value="20"/> <description>Keyboard stop (POSIX).</description>
- <label name="SIGTTIN" value="21"/> <description>Background read from tty (POSIX).</description>
- <label name="SIGTTOU" value="22"/> <description>Background write to tty (POSIX).</description>
- <label name="SIGURG" value="23"/> <description>Urgent condition on socket (4.2 BSD).</description>
- <label name="SIGXCPU" value="24"/> <description>CPU limit exceeded (4.2 BSD).</description>
- <label name="SIGXFSZ" value="25"/> <description>File size limit exceeded (4.2 BSD).</description>
- <label name="SIGVTALRM" value="26"/> <description>Virtual alarm clock (4.2 BSD).</description>
- <label name="SIGPROF" value="27"/> <description>Profiling alarm clock (4.2 BSD).</description>
- <label name="SIGWINCH" value="28"/> <description>Window size change (4.3 BSD, Sun).</description>
- <label name="SIGIO" value="29"/> <description>I/O now possible (4.2 BSD). (aka SIGPOLL)</description>
- <label name="SIGPWR" value="30"/> <description>Power failure restart (System V).</description>
- <label name="SIGSYS" value="31"/> <description>Bad system call.</description>
- </enum>
- </type>
-
- <event name="fork">
- <description>Process fork</description>
- <field name="parent_pid"> <description>PID of the parent process</description> <uint/> </field>
- <field name="child_pid"> <description>PID of the child process</description> <uint/> </field>
- <field name="child_tgid"> <description>Thread group ID of the child process (POSIX PID)</description> <uint/> </field>
- </event>
-
- <event name="kernel_thread">
- <description>Just created a new kernel thread</description>
- <field name="pid"> <description>PID of the kernel thread</description> <uint/> </field>
- <field name="function"> <description>Function called</description> <pointer/> </field>
- </event>
-
-
- <event name="exit">
- <description>Process exit</description>
- <field name="pid"> <description>PID of the process</description> <uint/> </field>
- </event>
-
- <event name="wait">
- <description>Process wait</description>
- <field name="parent_pid"> <description>PID of the waiting process</description> <uint/> </field>
- <field name="child_pid"> <description>PID of the process waited for</description> <uint/> </field>
- </event>
-
- <event name="free">
- <description>Process kernel data structure free (end of life of a zombie)</description>
- <field name="pid"> <description>PID of the freed process</description> <uint/> </field>
- </event>
-
- <event name="kill">
- <description>Process kill system call</description>
- <field name="pid"> <description>PID of the process</description> <uint/> </field>
- <field name="target_pid"> <description>PID of the process to kill</description> <uint/> </field>
- <field name="signal"> <description>Signal number</description> <typeref name="signal_name"/> </field>
- </event>
-
- <event name="signal">
- <description>Process signal reception</description>
- <field name="pid"> <description>PID of the receiving process</description> <uint/> </field>
- <field name="signal"> <description>Signal number</description> <typeref name="signal_name"/> </field>
- </event>
-
- <event name="wakeup">
- <description>Process wakeup</description>
- <field name="pid"> <description>PID of the receiving process</description> <uint/> </field>
- <field name="state"> <description>State of the awakened process. -1 unrunnable, 0 runnable, >0 stopped.</description> <int/> </field>
- </event>
-
- <event name="schedchange">
- <description>Scheduling change</description>
- <field name="out"> <description>Outgoing process</description> <uint/> </field>
- <field name="in"> <description>Incoming process</description> <uint/> </field>
- <field name="out_state"> <description>Outgoing process' state. -1 unrunnable, 0 runnable, >0 stopped.</description> <int/> </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="socket">
- <description>The socket facility contains events related to sockets</description>
-
- <event name="call">
- <description>Generic socket call : FIXME : should be more detailed.</description>
- <field name="call_number"> <description>Number of socket call</description> <int size="4"/> </field>
- <field name="first_argument"> <description>First argument of socket call</description> <ulong/> </field>
- </event>
-
- <event name="create">
- <description>Create a socket</description>
- <field name="socket"> <description>Socket structure address</description> <pointer/> </field>
- <field name="family"> <description>Socket family</description> <int size="4"/> </field>
- <field name="type"> <description>Socket type</description> <int size="4"/> </field>
- <field name="protocol"> <description>Socket protocol</description> <int size="4"/> </field>
- <field name="fd"> <description>Socket file descriptor</description> <int size="4"/> </field>
- </event>
-
- <event name="sendmsg">
- <description>Sending a socket message</description>
- <field name="socket"> <description>Socket structure address</description> <pointer/> </field>
- <field name="family"> <description>Socket family</description> <int size="4"/> </field>
- <field name="type"> <description>Socket type</description> <int size="4"/> </field>
- <field name="protocol"> <description>Socket protocol</description> <int size="4"/> </field>
- <field name="size"> <description>Size of the message</description> <size_t/> </field>
- </event>
-
- <event name="recvmsg">
- <description>Receiving a socket message</description>
- <field name="socket"> <description>Socket structure address</description> <pointer/> </field>
- <field name="family"> <description>Socket family</description> <int size="4"/> </field>
- <field name="type"> <description>Socket type</description> <int size="4"/> </field>
- <field name="protocol"> <description>Socket protocol</description> <int size="4"/> </field>
- <field name="size"> <description>Size of the message</description> <size_t/> </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="stack">
- <description>The stack facility has events related to getting process stack.</description>
-
- <event name="process_dump_32">
- <description>Dump process EIPs on the user stackfor a 32 bits process</description>
- <field name="eip"> <description>Sequence of EIP</description>
- <sequence write="custom">
- <uint/>
- <uint_fixed size="4"/>
- </sequence>
- </field>
- </event>
-
- <event name="process_dump_64">
- <description>Dump process EIPs on the user stack for a 64 bits process</description>
- <field name="eip"> <description>Sequence of EIP</description>
- <sequence write="custom">
- <uint/>
- <uint_fixed size="8"/>
- </sequence>
- </field>
- </event>
-
- <event name="kernel_dump">
- <description>Dump EIPs on the kernel stack</description>
- <field name="eip"> <description>Sequence of EIP</description>
- <sequence write="custom">
- <uint/>
- <ulong/>
- </sequence>
- </field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="statedump">
- <description>The statedump facility contains the events generated at trace startup</description>
-
- <type name="thread_type">
- <enum>
- <label name="USER_THREAD" value="0"/> <description>User thread</description>
- <label name="KERNEL_THREAD" value="1"/> <description>Kernel Thread</description>
- </enum>
- </type>
-
- <type name="execution_mode">
- <enum>
- <label name="USER_MODE" value="0"/> <description>Task is executing user code</description>
- <label name="SYSCALL" value="1"/> <description>Task is in a system call</description>
- <label name="TRAP" value="2"/> <description>Task is in a trap</description>
- <label name="IRQ" value="3"/> <description></description>
- <label name="SOFTIRQ" value="4"/> <description></description>
- <label name="MODE_UNKNOWN" value="5"/> <description>Execution mode cannot be determined for this task</description>
- </enum>
- </type>
-
- <type name="execution_submode">
- <enum>
- <label name="NONE" value="0"/> <description>No execution submode to report</description>
- <label name="UNKNOWN" value="1"/> <description>Task execution submode cannot be determined</description>
- </enum>
- </type>
-
- <type name="process_status">
- <enum>
- <label name="UNNAMED" value="0"/> <description></description>
- <label name="WAIT_FORK" value="1"/> <description></description>
- <label name="WAIT_CPU" value="2"/> <description></description>
- <label name="EXIT" value="3"/> <description></description>
- <label name="ZOMBIE" value="4"/> <description></description>
- <label name="WAIT" value="5"/> <description></description>
- <label name="RUN" value="6"/> <description></description>
- <label name="DEAD" value="7"/> <description></description>
- </enum>
- </type>
-
- <type name="interface_state">
- <enum>
- <label name="UP" value="0"/> <description></description>
- <label name="DOWN" value="1"/> <description></description>
- </enum>
- </type>
-
- <event name="enumerate_file_descriptors">
- <description>List of open file descriptors</description>
- <field name="name"><description>File name</description><string/></field>
- <field name="PID"><description>Process identifier</description><uint size="4"/></field>
- <field name="fd"><description>File descriptor index in this process's task_struct</description><uint size="4"/></field>
- </event>
-
- <event name="enumerate_vm_maps">
- <description>List of active vm maps</description>
- <field name="PID"><description>Process identifier</description><uint size="4"/></field>
- <field name="start"> <description>VM's start address</description> <pointer/> </field>
- <field name="end"> <description>VM's end address</description> <pointer/> </field>
- <field name="flags"> <description>VM area flags</description> <uint size="1"/> </field>
- <field name="pgoff"> <description>VM's page offset</description> <long/> </field>
- <field name="inode"> <description>Inode associated with this VM</description> <long/> </field>
- </event>
-
- <event name="enumerate_modules">
- <description>List of loaded kernel modules</description>
- <field name="name"><description>Module name</description><string/></field>
- <field name="state"><description>Module's state</description><uint size="4"/></field>
- <field name="ref"><description>Number of references to this module</description><uint size="4"/></field>
- </event>
-
- <event name="enumerate_interrupts">
- <description>List of registered interrupts</description>
- <field name="name"> <description>Interrupt name</description> <string/> </field>
- <field name="action"> <description>action triggered by interrupt</description> <string/> </field>
- <field name="num"> <description>Interrupt number</description> <uint size="4"/> </field>
- </event>
-
- <event name="enumerate_process_state">
- <description>State of each process when statedump is performed</description>
- <field name="pid"><description>Process identifier</description><uint size="4"/></field>
- <field name="parent_pid"><description>Parent process identifier</description><uint size="4"/></field>
- <field name="name"> <description>Process name</description><string/></field>
- <field name="type"> <description>Thread type</description> <typeref name="thread_type"/> </field>
- <field name="mode"> <description>Execution submode</description> <typeref name="execution_mode"/> </field>
- <field name="submode"> <description>Execution submode</description> <typeref name="execution_submode"/> </field>
- <field name="status"> <description>Process status</description> <typeref name="process_status"/> </field>
- <field name="tgid"><description>Thread group ID (POSIX PID)</description><uint size="4"/></field>
- </event>
-
- <event name="enumerate_network_ip_interface">
- <description>List of each IP interface up</description>
- <field name="name"> <description>Interface name</description><string/></field>
- <field name="addr"> <description>IP address</description> <uint size="4" byte_order="network"/> </field>
- <field name="status"> <description>Status of the interface</description> <typeref name="interface_state"/> </field>
- </event>
-
- <event name="statedump_end">
- <description>Kernel state dump complete</description>
- </event>
-
-</facility>
-
-
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="timer">
- <description>The timer facility has events related to timer events in the kernel.</description>
-
- <type name="itimer_kind">
- <enum>
- <label name="ITIMER_REAL" value="0"/> <description>decrements in real time,
- and delivers SIGALRM upon expiration.</description>
- <label name="ITIMER_VIRTUAL" value="1"/> <description>decrements only when the
- process is executing, and delivers SIGVTALRM upon expiration.</description>
- <label name="ITIMER_PROF" value="2"/> <description>decrements both when the
- process executes and when the system is executing on behalf of the
- process. Coupled with ITIMER_VIRTUAL, this timer is usually used to
- profile the time spent by the application in user and kernel space.
- SIGPROF is delivered upon expiration.</description>
- </enum>
- </type>
-
- <event name="expired">
- <description>A timer or itimer has expired.</description>
- <field name="pid">
- <description>PID of the process to wake up.</description>
- <uint size="4"/>
- </field>
- </event>
-
- <event name="softirq">
- <description>The timer softirq is currently runned.</description>
- </event>
-
- <event name="set_itimer">
- <description>An interval timer is set.</description>
- <field name="which"> <description>kind of interval timer.</description>
- <typeref name="itimer_kind"/>
- </field>
- <field name="interval_seconds"><uint size="4"/></field>
- <field name="interval_microseconds"><uint size="4"/></field>
- <field name="value_seconds"><uint size="4"/></field>
- <field name="value_microseconds"><uint size="4"/></field>
- </event>
-
- <event name="set_timer">
- <description>A timer is added/modified/migrated.</description>
- <field name="expires"><ulong/></field>
- <field name="function"><pointer/></field>
- <field name="data"><ulong/></field>
- </event>
-
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="user_generic">
- <description>Generic user space facility</description>
-
- <event name="string">
- <description>Takes a string from user space</description>
- <field name="data"><string/></field>
- </event>
-
- <event name="string_pointer">
- <description>Takes a string and pointer from user space</description>
- <field name="string"><string/></field>
- <field name="pointer"><pointer/></field>
- </event>
-
- <event name="slow_printf" param="buffer">
- <description>Takes a buffer of variable size (written by printf) and log it.</description>
- <field name="string"><string/></field>
- </event>
-
- <event name="function_entry" attribute="no_instrument_function">
- <description>Entry in a function</description>
- <field name="this_fn"><pointer/></field>
- <field name="call_site"><pointer/></field>
- </event>
-
- <event name="function_exit" attribute="no_instrument_function">
- <description>Exit from a function</description>
- <field name="this_fn"><pointer/></field>
- <field name="call_site"><pointer/></field>
- </event>
-
- <event name="thread_brand" attribute="high_priority">
- <description>Name a thread</description>
- <field name="name"><string/></field>
- </event>
-</facility>
+++ /dev/null
-<?xml version="1.0"?>
-<facility name="xenoltt">
- <description>XenoLTT facility Version 9 - JOV - 09-11-2006</description>
-
- <event name="xeno_thread_init">
- <description>Xenomai Thread Init</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="flags"><description>Flags</description><uint size=4/></field>
- <field name="prio"><description>Priority</description><uint size=4/></field>
- </event>
-
- <event name="xeno_thread_start">
- <description>Xenomai Thread Start</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- </event>
-
- <event name="xeno_thread_delete">
- <description>Xenomai Thread Delete</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- </event>
-
- <event name="xeno_thread_set_period">
- <description>Xenomai Thread Set Periodic</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="idate"><description>Start time</description><uint size=8/></field>
- <field name="period"><description>Period</description><uint size=8/></field>
- <field name="timer_address"><description>Timer Address</description><pointer></field>
- </event>
-
- <event name="xeno_thread_wait_period">
- <description>Xenomai Thread Wait Period</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- </event>
-
- <event name="xeno_thread_missed_period">
- <description>Xenomai thread next period time</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="overruns"><description>Number of misses</description><uint size=8/></field>
- </event>
-
- <event name="xeno_thread_suspend">
- <description>Xenomai Thread Suspend</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="mask"><uint size=4/></field>
- <field name="timeout"><uint size=4/></field>
- <field name="wchan"><pointer/></field>
- </event>
-
- <event name="xeno_thread_resume">
- <description>Xenomai thread resume</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="mask"><uint size=4/></field>
- </event>
-
- <event name="xeno_thread_unblock">
- <description>Xenomai thread unblock</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="status"><uint size=4/></field>
- </event>
-
- <event name="xeno_thread_renice">
- <description>Xenomai thread priority change</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="prio"><description>Priority</description><uint size=4/></field>
- </event>
-
- <event name="xeno_thread_restart">
- <description>Xenomai thread restart</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- </event>
-
- <event name="xeno_thread_switch">
- <description>Xenomai thread restart</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="thread_out"><description>Name</description><string/></field>
- <field name="address_out"><description>Address</description><pointer></field>
- </event>
-
- <event name="xeno_timer_tick">
- <description>Xenomai timer tick</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- </event>
-
- <event name="xeno_synch_sleepon">
- <description>Xenomai sleepon</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="sync"><pointer/></field>
- </event>
-
- <event name="xeno_synch_wakeup1">
- <description>Xenomai wakeup1</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="sync"><pointer/></field>
- </event>
-
- <event name="xeno_synch_wakeupx">
- <description>Xenomai wakeupx</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="sync"><pointer/></field>
- </event>
-
- <event name="xeno_synch_syncflush">
- <description>Xenomai syncflush</description>
- <field name="sync"><pointer/></field>
- <field name="reason"><uint size=4/></field>
- </event>
-
- <event name="xeno_synch_syncforget">
- <description>Xenomai syncforget</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="sync"><pointer/></field>
- </event>
-
- <event name="xeno_synch_set_owner">
- <description>Xenomai sleepon</description>
- <field name="address"><description>Address</description><pointer></field>
- <field name="sync"><description>Synch</description><pointer></field>
- </event>
-
- <event name="xeno_synch_unlock">
- <description>Xenomai unlock synch</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Owner</description><pointer></field>
- <field name="sync"><description>Synch</description><pointer></field>
- </event>
-
- <event name="xeno_synch_renice_thread">
- <description>Xenomai sleepon</description>
- <field name="thread"><description>Name</description><string/></field>
- <field name="address"><description>Address</description><pointer></field>
- <field name="prio"><description>Priority</description><uint size=4/></field>
- </event>
-
-</facility>
+++ /dev/null
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-#
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd=$cpprog
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "$0: no input file specified" >&2
- exit 1
-else
- :
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d "$dst" ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=$mkdirprog
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f "$src" ] || [ -d "$src" ]
- then
- :
- else
- echo "$0: $src does not exist" >&2
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "$0: no destination specified" >&2
- exit 1
- else
- :
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d "$dst" ]
- then
- dst=$dst/`basename "$src"`
- else
- :
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
- '
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp=$pathcomp$1
- shift
-
- if [ ! -d "$pathcomp" ] ;
- then
- $mkdirprog "$pathcomp"
- else
- :
- fi
-
- pathcomp=$pathcomp/
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd "$dst" &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename "$dst"`
- else
- dstfile=`basename "$dst" $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename "$dst"`
- else
- :
- fi
-
-# Make a couple of temp file names in the proper directory.
-
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
-# Trap to clean up temp files at exit.
-
- trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
- trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd "$src" "$dsttmp" &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location. We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons. In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
- if [ -f "$dstdir/$dstfile" ]
- then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
- $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
- {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit
- }
- else
- :
- fi
-} &&
-
-# Now rename the file to the real destination.
-
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
-fi &&
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-
-{
- (exit 0); exit
-}
+++ /dev/null
-liblttctl.lo liblttctl.o: liblttctl.c ../config.h ../liblttctl/lttctl.h \
- /usr/include/linux/limits.h /usr/include/asm/types.h \
- /usr/include/asm-i386/types.h /usr/include/sys/socket.h \
- /usr/include/features.h /usr/include/sys/cdefs.h \
- /usr/include/gnu/stubs.h /usr/include/sys/uio.h \
- /usr/include/sys/types.h /usr/include/bits/types.h \
- /usr/include/bits/wordsize.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/stddef.h \
- /usr/include/bits/typesizes.h /usr/include/time.h /usr/include/endian.h \
- /usr/include/bits/endian.h /usr/include/sys/select.h \
- /usr/include/bits/select.h /usr/include/bits/sigset.h \
- /usr/include/bits/time.h /usr/include/sys/sysmacros.h \
- /usr/include/bits/pthreadtypes.h /usr/include/bits/sched.h \
- /usr/include/bits/uio.h /usr/include/bits/socket.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/limits.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/syslimits.h \
- /usr/include/limits.h /usr/include/bits/posix1_lim.h \
- /usr/include/bits/local_lim.h /usr/include/bits/posix2_lim.h \
- /usr/include/bits/sockaddr.h /usr/include/asm/socket.h \
- /usr/include/asm-i386/socket.h /usr/include/asm/sockios.h \
- /usr/include/asm-i386/sockios.h /usr/include/linux/netlink.h \
- /usr/include/linux/types.h /usr/include/linux/posix_types.h \
- /usr/include/linux/stddef.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/asm/posix_types.h \
- /usr/include/asm/posix_types.h /usr/include/asm-i386/posix_types.h \
- /usr/include/errno.h /usr/include/bits/errno.h \
- /usr/include/linux/errno.h /usr/include/asm/errno.h \
- /usr/include/asm-i386/errno.h /usr/include/stdio.h /usr/include/libio.h \
- /usr/include/_G_config.h /usr/include/wchar.h /usr/include/bits/wchar.h \
- /usr/include/gconv.h /usr/lib/gcc/i486-linux-gnu/4.0.3/include/stdarg.h \
- /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
- /usr/include/bits/stdio.h /usr/include/error.h /usr/include/stdlib.h \
- /usr/include/alloca.h /usr/include/unistd.h \
- /usr/include/bits/posix_opt.h /usr/include/bits/confname.h \
- /usr/include/getopt.h /usr/include/string.h /usr/include/bits/string.h \
- /usr/include/bits/string2.h
-
-../config.h:
-
-../liblttctl/lttctl.h:
-
-/usr/include/linux/limits.h:
-
-/usr/include/asm/types.h:
-
-/usr/include/asm-i386/types.h:
-
-/usr/include/sys/socket.h:
-
-/usr/include/features.h:
-
-/usr/include/sys/cdefs.h:
-
-/usr/include/gnu/stubs.h:
-
-/usr/include/sys/uio.h:
-
-/usr/include/sys/types.h:
-
-/usr/include/bits/types.h:
-
-/usr/include/bits/wordsize.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/stddef.h:
-
-/usr/include/bits/typesizes.h:
-
-/usr/include/time.h:
-
-/usr/include/endian.h:
-
-/usr/include/bits/endian.h:
-
-/usr/include/sys/select.h:
-
-/usr/include/bits/select.h:
-
-/usr/include/bits/sigset.h:
-
-/usr/include/bits/time.h:
-
-/usr/include/sys/sysmacros.h:
-
-/usr/include/bits/pthreadtypes.h:
-
-/usr/include/bits/sched.h:
-
-/usr/include/bits/uio.h:
-
-/usr/include/bits/socket.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/limits.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/syslimits.h:
-
-/usr/include/limits.h:
-
-/usr/include/bits/posix1_lim.h:
-
-/usr/include/bits/local_lim.h:
-
-/usr/include/bits/posix2_lim.h:
-
-/usr/include/bits/sockaddr.h:
-
-/usr/include/asm/socket.h:
-
-/usr/include/asm-i386/socket.h:
-
-/usr/include/asm/sockios.h:
-
-/usr/include/asm-i386/sockios.h:
-
-/usr/include/linux/netlink.h:
-
-/usr/include/linux/types.h:
-
-/usr/include/linux/posix_types.h:
-
-/usr/include/linux/stddef.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/asm/posix_types.h:
-
-/usr/include/asm/posix_types.h:
-
-/usr/include/asm-i386/posix_types.h:
-
-/usr/include/errno.h:
-
-/usr/include/bits/errno.h:
-
-/usr/include/linux/errno.h:
-
-/usr/include/asm/errno.h:
-
-/usr/include/asm-i386/errno.h:
-
-/usr/include/stdio.h:
-
-/usr/include/libio.h:
-
-/usr/include/_G_config.h:
-
-/usr/include/wchar.h:
-
-/usr/include/bits/wchar.h:
-
-/usr/include/gconv.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/stdarg.h:
-
-/usr/include/bits/stdio_lim.h:
-
-/usr/include/bits/sys_errlist.h:
-
-/usr/include/bits/stdio.h:
-
-/usr/include/error.h:
-
-/usr/include/stdlib.h:
-
-/usr/include/alloca.h:
-
-/usr/include/unistd.h:
-
-/usr/include/bits/posix_opt.h:
-
-/usr/include/bits/confname.h:
-
-/usr/include/getopt.h:
-
-/usr/include/string.h:
-
-/usr/include/bits/string.h:
-
-/usr/include/bits/string2.h:
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# liblttctl/Makefile. Generated from Makefile.in by configure.
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-srcdir = .
-top_srcdir = ..
-
-pkgdatadir = $(datadir)/ltt-control
-pkglibdir = $(libdir)/ltt-control
-pkgincludedir = $(includedir)/ltt-control
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /usr/bin/install -c
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = i686-pc-linux-gnu
-ACLOCAL = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run aclocal-1.7
-AMDEP_FALSE = #
-AMDEP_TRUE =
-AMTAR = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoconf
-AUTOHEADER = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoheader
-AUTOMAKE = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run automake-1.7
-AWK = mawk
-BASH = /bin/sh
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2
-CPP = gcc -E
-CPPFLAGS =
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEFAULT_INCLUDES = -I$(top_srcdir) -I$(top_builddir)
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C =
-ECHO_N = -n
-ECHO_T =
-EGREP = /bin/grep -E
-EXEEXT =
-F77 =
-FFLAGS =
-GREP = /bin/grep
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-LDFLAGS =
-LIBOBJS =
-LIBS =
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS =
-MAKEINFO = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run makeinfo
-OBJEXT = o
-PACKAGE = ltt-control
-PACKAGE_BUGREPORT = BUG-REPORT-ADDRESS
-PACKAGE_CFLAGS = -Wall -Wformat
-PACKAGE_LIBS =
-PACKAGE_NAME = FULL-PACKAGE-NAME
-PACKAGE_STRING = FULL-PACKAGE-NAME VERSION
-PACKAGE_TARNAME = full-package-name
-PACKAGE_VERSION = VERSION
-PATH_SEPARATOR = :
-RANLIB = ranlib
-SET_MAKE =
-SHELL = /bin/sh
-STRIP = strip
-THREAD_LIBS = -lpthread
-UTIL_LIBS = -lutil
-VERSION = 0.24-17092006
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 =
-am__fastdepCC_FALSE = #
-am__fastdepCC_TRUE =
-am__fastdepCXX_FALSE = #
-am__fastdepCXX_TRUE =
-am__include = include
-am__leading_dot = .
-am__quote =
-bindir = ${exec_prefix}/bin
-build = i686-pc-linux-gnu
-build_alias =
-build_cpu = i686
-build_os = linux-gnu
-build_vendor = pc
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = i686-pc-linux-gnu
-host_alias =
-host_cpu = i686
-host_os = linux-gnu
-host_vendor = pc
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = /usr/src/ltt-control-0.24-17092006/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-lttctlincludedir = ${prefix}/include/liblttctl
-mandir = ${datarootdir}/man
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-sysconfdir = ${prefix}/etc
-target_alias =
-
-lib_LTLIBRARIES = liblttctl.la
-liblttctl_la_SOURCES = liblttctl.c
-
-lttctlinclude_HEADERS = \
- lttctl.h
-
-subdir = liblttctl
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(lib_LTLIBRARIES)
-
-liblttctl_la_LDFLAGS =
-liblttctl_la_LIBADD =
-am_liblttctl_la_OBJECTS = liblttctl.lo
-liblttctl_la_OBJECTS = $(am_liblttctl_la_OBJECTS)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-DEP_FILES = ./$(DEPDIR)/liblttctl.Plo
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
- $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(liblttctl_la_SOURCES)
-HEADERS = $(lttctlinclude_HEADERS)
-
-DIST_COMMON = $(lttctlinclude_HEADERS) $(srcdir)/Makefile.in \
- Makefile.am
-SOURCES = $(liblttctl_la_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu liblttctl/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-libLTLIBRARIES_INSTALL = $(INSTALL)
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(libdir)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- if test -f $$p; then \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
- $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
- else :; fi; \
- done
-
-uninstall-libLTLIBRARIES:
- @$(NORMAL_UNINSTALL)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- p="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
- done
-
-clean-libLTLIBRARIES:
- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" = "$$p" && dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-liblttctl.la: $(liblttctl_la_OBJECTS) $(liblttctl_la_DEPENDENCIES)
- $(LINK) -rpath $(libdir) $(liblttctl_la_LDFLAGS) $(liblttctl_la_OBJECTS) $(liblttctl_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-include ./$(DEPDIR)/liblttctl.Plo
-
-.c.o:
- if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=no \
-# depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
- if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=no \
-# depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
-
-.c.lo:
- if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=yes \
-# depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-lttctlincludeHEADERS_INSTALL = $(INSTALL_HEADER)
-install-lttctlincludeHEADERS: $(lttctlinclude_HEADERS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(lttctlincludedir)
- @list='$(lttctlinclude_HEADERS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(lttctlincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(lttctlincludedir)/$$f"; \
- $(lttctlincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(lttctlincludedir)/$$f; \
- done
-
-uninstall-lttctlincludeHEADERS:
- @$(NORMAL_UNINSTALL)
- @list='$(lttctlinclude_HEADERS)'; for p in $$list; do \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " rm -f $(DESTDIR)$(lttctlincludedir)/$$f"; \
- rm -f $(DESTDIR)$(lttctlincludedir)/$$f; \
- done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(HEADERS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(lttctlincludedir)
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-lttctlincludeHEADERS
-
-install-exec-am: install-libLTLIBRARIES
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
- uninstall-lttctlincludeHEADERS
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libLTLIBRARIES clean-libtool ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am info info-am install \
- install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am \
- install-libLTLIBRARIES install-lttctlincludeHEADERS install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool pdf \
- pdf-am ps ps-am tags uninstall uninstall-am uninstall-info-am \
- uninstall-libLTLIBRARIES uninstall-lttctlincludeHEADERS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-
-
-lib_LTLIBRARIES = liblttctl.la
-liblttctl_la_SOURCES = liblttctl.c
-
-lttctlinclude_HEADERS = \
- lttctl.h
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_CFLAGS = @PACKAGE_CFLAGS@
-PACKAGE_LIBS = @PACKAGE_LIBS@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-THREAD_LIBS = @THREAD_LIBS@
-UTIL_LIBS = @UTIL_LIBS@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lttctlincludedir = @lttctlincludedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-lib_LTLIBRARIES = liblttctl.la
-liblttctl_la_SOURCES = liblttctl.c
-
-lttctlinclude_HEADERS = \
- lttctl.h
-
-subdir = liblttctl
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(lib_LTLIBRARIES)
-
-liblttctl_la_LDFLAGS =
-liblttctl_la_LIBADD =
-am_liblttctl_la_OBJECTS = liblttctl.lo
-liblttctl_la_OBJECTS = $(am_liblttctl_la_OBJECTS)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/liblttctl.Plo
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
- $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(liblttctl_la_SOURCES)
-HEADERS = $(lttctlinclude_HEADERS)
-
-DIST_COMMON = $(lttctlinclude_HEADERS) $(srcdir)/Makefile.in \
- Makefile.am
-SOURCES = $(liblttctl_la_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu liblttctl/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-libLTLIBRARIES_INSTALL = $(INSTALL)
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(libdir)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- if test -f $$p; then \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
- $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
- else :; fi; \
- done
-
-uninstall-libLTLIBRARIES:
- @$(NORMAL_UNINSTALL)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- p="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
- done
-
-clean-libLTLIBRARIES:
- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" = "$$p" && dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-liblttctl.la: $(liblttctl_la_OBJECTS) $(liblttctl_la_DEPENDENCIES)
- $(LINK) -rpath $(libdir) $(liblttctl_la_LDFLAGS) $(liblttctl_la_OBJECTS) $(liblttctl_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblttctl.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
-
-.c.lo:
-@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-lttctlincludeHEADERS_INSTALL = $(INSTALL_HEADER)
-install-lttctlincludeHEADERS: $(lttctlinclude_HEADERS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(lttctlincludedir)
- @list='$(lttctlinclude_HEADERS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(lttctlincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(lttctlincludedir)/$$f"; \
- $(lttctlincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(lttctlincludedir)/$$f; \
- done
-
-uninstall-lttctlincludeHEADERS:
- @$(NORMAL_UNINSTALL)
- @list='$(lttctlinclude_HEADERS)'; for p in $$list; do \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " rm -f $(DESTDIR)$(lttctlincludedir)/$$f"; \
- rm -f $(DESTDIR)$(lttctlincludedir)/$$f; \
- done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(HEADERS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(lttctlincludedir)
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-lttctlincludeHEADERS
-
-install-exec-am: install-libLTLIBRARIES
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
- uninstall-lttctlincludeHEADERS
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libLTLIBRARIES clean-libtool ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am info info-am install \
- install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am \
- install-libLTLIBRARIES install-lttctlincludeHEADERS install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool pdf \
- pdf-am ps ps-am tags uninstall uninstall-am uninstall-info-am \
- uninstall-libLTLIBRARIES uninstall-lttctlincludeHEADERS
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-/* libltt
- *
- * Linux Trace Toolkit Netlink Control Library
- *
- * Controls the ltt-control kernel module through a netlink socket.
- *
- * Heavily inspired from libipq.c (iptables) made by
- * James Morris <jmorris@intercode.com.au>
- *
- * Copyright 2005 -
- * Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <liblttctl/lttctl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <error.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <unistd.h>
-#include <string.h>
-
-
-
-/* Private interface */
-
-enum {
- LTTCTL_ERR_NONE = 0,
- LTTCTL_ERR_IMPL,
- LTTCTL_ERR_HANDLE,
- LTTCTL_ERR_SOCKET,
- LTTCTL_ERR_BIND,
- LTTCTL_ERR_BUFFER,
- LTTCTL_ERR_RECV,
- LTTCTL_ERR_NLEOF,
- LTTCTL_ERR_ADDRLEN,
- LTTCTL_ERR_STRUNC,
- LTTCTL_ERR_RTRUNC,
- LTTCTL_ERR_NLRECV,
- LTTCTL_ERR_SEND,
- LTTCTL_ERR_SUPP,
- LTTCTL_ERR_RECVBUF,
- LTTCTL_ERR_TIMEOUT,
- LTTCTL_ERR_PROTOCOL
-};
-#define LTTCTL_MAXERR LTTCTL_ERR_PROTOCOL
-
-
-struct lttctl_errmap_t {
- int errcode;
- char *message;
-} lttctl_errmap[] = {
- { LTTCTL_ERR_NONE, "Unknown error" },
- { LTTCTL_ERR_IMPL, "Implementation error" },
- { LTTCTL_ERR_HANDLE, "Unable to create netlink handle" },
- { LTTCTL_ERR_SOCKET, "Unable to create netlink socket" },
- { LTTCTL_ERR_BIND, "Unable to bind netlink socket" },
- { LTTCTL_ERR_BUFFER, "Unable to allocate buffer" },
- { LTTCTL_ERR_RECV, "Failed to receive netlink message" },
- { LTTCTL_ERR_NLEOF, "Received EOF on netlink socket" },
- { LTTCTL_ERR_ADDRLEN, "Invalid peer address length" },
- { LTTCTL_ERR_STRUNC, "Sent message truncated" },
- { LTTCTL_ERR_RTRUNC, "Received message truncated" },
- { LTTCTL_ERR_NLRECV, "Received error from netlink" },
- { LTTCTL_ERR_SEND, "Failed to send netlink message" },
- { LTTCTL_ERR_SUPP, "Operation not supported" },
- { LTTCTL_ERR_RECVBUF, "Receive buffer size invalid" },
- { LTTCTL_ERR_TIMEOUT, "Timeout"},
- { LTTCTL_ERR_PROTOCOL, "Invalid protocol specified" }
-};
-
-static int lttctl_errno = LTTCTL_ERR_NONE;
-
-
-static ssize_t lttctl_netlink_sendto(const struct lttctl_handle *h,
- const void *msg, size_t len);
-
-static ssize_t lttctl_netlink_recvfrom(const struct lttctl_handle *h,
- unsigned char *buf, size_t len,
- int timeout);
-
-static ssize_t lttctl_netlink_sendmsg(const struct lttctl_handle *h,
- const struct msghdr *msg,
- unsigned int flags);
-
-static char *lttctl_strerror(int errcode);
-
-void lttctl_perror(const char *s);
-
-static ssize_t lttctl_netlink_sendto(const struct lttctl_handle *h,
- const void *msg, size_t len)
-{
- int status = sendto(h->fd, msg, len, 0,
- (struct sockaddr *)&h->peer, sizeof(h->peer));
- if (status < 0)
- lttctl_errno = LTTCTL_ERR_SEND;
-
- return status;
-}
-
-static ssize_t lttctl_netlink_sendmsg(const struct lttctl_handle *h,
- const struct msghdr *msg,
- unsigned int flags)
-{
- int status = sendmsg(h->fd, msg, flags);
- if (status < 0)
- lttctl_errno = LTTCTL_ERR_SEND;
- return status;
-}
-
-static ssize_t lttctl_netlink_recvfrom(const struct lttctl_handle *h,
- unsigned char *buf, size_t len,
- int timeout)
-{
- int addrlen, status;
- struct nlmsghdr *nlh;
-
- if (len < sizeof(struct nlmsghdr)) {
- lttctl_errno = LTTCTL_ERR_RECVBUF;
- lttctl_perror("Netlink recvfrom");
- return -1;
- }
- addrlen = sizeof(h->peer);
-
- if (timeout != 0) {
- int ret;
- struct timeval tv;
- fd_set read_fds;
-
- if (timeout < 0) {
- /* non-block non-timeout */
- tv.tv_sec = 0;
- tv.tv_usec = 0;
- } else {
- tv.tv_sec = timeout / 1000000;
- tv.tv_usec = timeout % 1000000;
- }
-
- FD_ZERO(&read_fds);
- FD_SET(h->fd, &read_fds);
- ret = select(h->fd+1, &read_fds, NULL, NULL, &tv);
- if (ret < 0) {
- if (errno == EINTR) {
- printf("eintr\n");
- return 0;
- } else {
- lttctl_errno = LTTCTL_ERR_RECV;
- lttctl_perror("Netlink recvfrom");
- return -1;
- }
- }
- if (!FD_ISSET(h->fd, &read_fds)) {
- lttctl_errno = LTTCTL_ERR_TIMEOUT;
- printf("timeout\n");
- return 0;
- }
- }
- status = recvfrom(h->fd, buf, len, 0,
- (struct sockaddr *)&h->peer, &addrlen);
-
- if (status < 0) {
- lttctl_errno = LTTCTL_ERR_RECV;
- lttctl_perror("Netlink recvfrom");
- return status;
- }
- if (addrlen != sizeof(h->peer)) {
- lttctl_errno = LTTCTL_ERR_RECV;
- lttctl_perror("Netlink recvfrom");
- return -1;
- }
- if (h->peer.nl_pid != 0) {
- lttctl_errno = LTTCTL_ERR_RECV;
- lttctl_perror("Netlink recvfrom");
- return -1;
- }
- if (status == 0) {
- lttctl_errno = LTTCTL_ERR_NLEOF;
- lttctl_perror("Netlink recvfrom");
- return -1;
- }
- nlh = (struct nlmsghdr *)buf;
- if (nlh->nlmsg_flags & MSG_TRUNC || nlh->nlmsg_len > status) {
- lttctl_errno = LTTCTL_ERR_RTRUNC;
- lttctl_perror("Netlink recvfrom");
- return -1;
- }
-
-
- return status;
-}
-
-
-static char *lttctl_strerror(int errcode)
-{
- if (errcode < 0 || errcode > LTTCTL_MAXERR)
- errcode = LTTCTL_ERR_IMPL;
- return lttctl_errmap[errcode].message;
-}
-
-
-char *lttctl_errstr(void)
-{
- return lttctl_strerror(lttctl_errno);
-}
-
-void lttctl_perror(const char *s)
-{
- if (s)
- fputs(s, stderr);
- else
- fputs("ERROR", stderr);
- if (lttctl_errno)
- fprintf(stderr, ": %s", lttctl_errstr());
- if (errno)
- fprintf(stderr, ": %s", strerror(errno));
- fputc('\n', stderr);
-}
-
-/* public interface */
-
-/*
- * Create and initialise an lttctl handle.
- */
-struct lttctl_handle *lttctl_create_handle(void)
-{
- int status;
- struct lttctl_handle *h;
-
- h = (struct lttctl_handle *)malloc(sizeof(struct lttctl_handle));
- if (h == NULL) {
- lttctl_errno = LTTCTL_ERR_HANDLE;
- lttctl_perror("Create handle");
- goto alloc_error;
- }
-
- memset(h, 0, sizeof(struct lttctl_handle));
-
- h->fd = socket(PF_NETLINK, SOCK_RAW, NETLINK_LTT);
-
- if (h->fd == -1) {
- lttctl_errno = LTTCTL_ERR_SOCKET;
- lttctl_perror("Create handle");
- goto socket_error;
- }
- memset(&h->local, 0, sizeof(struct sockaddr_nl));
- h->local.nl_family = AF_NETLINK;
- h->local.nl_pid = getpid();
- h->local.nl_groups = 0;
- status = bind(h->fd, (struct sockaddr *)&h->local, sizeof(h->local));
- if (status == -1) {
- lttctl_errno = LTTCTL_ERR_BIND;
- lttctl_perror("Create handle");
- goto bind_error;
- }
- memset(&h->peer, 0, sizeof(struct sockaddr_nl));
- h->peer.nl_family = AF_NETLINK;
- h->peer.nl_pid = 0;
- h->peer.nl_groups = 0;
- return h;
-
- /* Error condition */
-bind_error:
-socket_error:
- close(h->fd);
-alloc_error:
- free(h);
- return NULL;
-}
-
-/*
- * No error condition is checked here at this stage, but it may happen
- * if/when reliable messaging is implemented.
- */
-int lttctl_destroy_handle(struct lttctl_handle *h)
-{
- if (h) {
- close(h->fd);
- free(h);
- }
- return 0;
-}
-
-
-int lttctl_create_trace(const struct lttctl_handle *h,
- char *name, enum trace_mode mode, char *trace_type,
- unsigned subbuf_size_low, unsigned n_subbufs_low,
- unsigned subbuf_size_med, unsigned n_subbufs_med,
- unsigned subbuf_size_high, unsigned n_subbufs_high)
-{
- int err;
-
- struct {
- struct nlmsghdr nlh;
- lttctl_peer_msg_t msg;
- } req;
- struct {
- struct nlmsghdr nlh;
- struct nlmsgerr nlerr;
- lttctl_peer_msg_t msg;
- } ack;
-
- memset(&req, 0, sizeof(req));
- req.nlh.nlmsg_len = NLMSG_LENGTH(sizeof(lttctl_peer_msg_t));
- req.nlh.nlmsg_flags = NLM_F_REQUEST|NLM_F_ACK;
- req.nlh.nlmsg_type = LTTCTLM_CONTROL;
- req.nlh.nlmsg_pid = h->local.nl_pid;
- req.nlh.nlmsg_seq = 0;
-
- strncpy(req.msg.trace_name, name, NAME_MAX);
- strncpy(req.msg.trace_type, trace_type, NAME_MAX);
- req.msg.op = OP_CREATE;
- req.msg.args.new_trace.mode = mode;
- req.msg.args.new_trace.subbuf_size_low = subbuf_size_low;
- req.msg.args.new_trace.n_subbufs_low = n_subbufs_low;
- req.msg.args.new_trace.subbuf_size_med = subbuf_size_med;
- req.msg.args.new_trace.n_subbufs_med = n_subbufs_med;
- req.msg.args.new_trace.subbuf_size_high = subbuf_size_high;
- req.msg.args.new_trace.n_subbufs_high = n_subbufs_high;
-
- err = lttctl_netlink_sendto(h, (void *)&req, req.nlh.nlmsg_len);
- if(err < 0) goto senderr;
-
- err = lttctl_netlink_recvfrom(h, (void*)&ack, sizeof(ack), 0);
- if(err < 0) goto senderr;
-
- err = ack.nlerr.error;
- if(err != 0) {
- errno = err;
- lttctl_perror("Create Trace Error");
- return err;
- }
-
- return 0;
-
-senderr:
- lttctl_perror("Create Trace Error");
- err = EPERM;
- return err;
-}
-
-int lttctl_destroy_trace(const struct lttctl_handle *h,
- char *name)
-{
- struct {
- struct nlmsghdr nlh;
- lttctl_peer_msg_t msg;
- } req;
- struct {
- struct nlmsghdr nlh;
- struct nlmsgerr nlerr;
- lttctl_peer_msg_t msg;
- } ack;
- int err;
-
- memset(&req, 0, sizeof(req));
- req.nlh.nlmsg_len = NLMSG_LENGTH(sizeof(lttctl_peer_msg_t));
- req.nlh.nlmsg_flags = NLM_F_REQUEST;
- req.nlh.nlmsg_type = LTTCTLM_CONTROL;
- req.nlh.nlmsg_pid = h->local.nl_pid;
-
- strncpy(req.msg.trace_name, name, NAME_MAX);
- req.msg.op = OP_DESTROY;
-
- err = lttctl_netlink_sendto(h, (void *)&req, req.nlh.nlmsg_len);
- if(err < 0) goto senderr;
-
- err = lttctl_netlink_recvfrom(h, (void*)&ack, sizeof(ack), 0);
- if(err < 0) goto senderr;
-
- err = ack.nlerr.error;
- if(err != 0) {
- errno = err;
- lttctl_perror("Destroy Trace Channels Error");
- return err;
- }
-
- return 0;
-
-senderr:
- lttctl_perror("Destroy Trace Channels Error");
- err = EPERM;
- return err;
-
-}
-
-int lttctl_start(const struct lttctl_handle *h,
- char *name)
-{
- struct {
- struct nlmsghdr nlh;
- lttctl_peer_msg_t msg;
- } req;
- struct {
- struct nlmsghdr nlh;
- struct nlmsgerr nlerr;
- lttctl_peer_msg_t msg;
- } ack;
-
- int err;
-
- memset(&req, 0, sizeof(req));
- req.nlh.nlmsg_len = NLMSG_LENGTH(sizeof(lttctl_peer_msg_t));
- req.nlh.nlmsg_flags = NLM_F_REQUEST;
- req.nlh.nlmsg_type = LTTCTLM_CONTROL;
- req.nlh.nlmsg_pid = h->local.nl_pid;
-
- strncpy(req.msg.trace_name, name, NAME_MAX);
- req.msg.op = OP_START;
-
- err = lttctl_netlink_sendto(h, (void *)&req, req.nlh.nlmsg_len);
- if(err < 0) goto senderr;
-
- err = lttctl_netlink_recvfrom(h, (void*)&ack, sizeof(ack), 0);
- if(err < 0) goto senderr;
-
- err = ack.nlerr.error;
- if(err != 0) {
- errno = err;
- lttctl_perror("Start Trace Error");
- return err;
- }
-
- return 0;
-
-senderr:
- err = EPERM;
- lttctl_perror("Start Trace Error");
- return err;
-
-}
-
-int lttctl_stop(const struct lttctl_handle *h,
- char *name)
-{
- struct {
- struct nlmsghdr nlh;
- lttctl_peer_msg_t msg;
- } req;
- struct {
- struct nlmsghdr nlh;
- struct nlmsgerr nlerr;
- lttctl_peer_msg_t msg;
- } ack;
- int err;
-
- memset(&req, 0, sizeof(req));
- req.nlh.nlmsg_len = NLMSG_LENGTH(sizeof(lttctl_peer_msg_t));
- req.nlh.nlmsg_flags = NLM_F_REQUEST;
- req.nlh.nlmsg_type = LTTCTLM_CONTROL;
- req.nlh.nlmsg_pid = h->local.nl_pid;
-
- strncpy(req.msg.trace_name, name, NAME_MAX);
- req.msg.op = OP_STOP;
-
- err = lttctl_netlink_sendto(h, (void *)&req, req.nlh.nlmsg_len);
- if(err < 0) goto senderr;
-
- err = lttctl_netlink_recvfrom(h, (void*)&ack, sizeof(ack), 0);
- if(err < 0) goto senderr;
-
- err = ack.nlerr.error;
- if(err != 0) {
- errno = err;
- lttctl_perror("Stop Trace Error");
- return err;
- }
-
- return 0;
-
-senderr:
- err = EPERM;
- lttctl_perror("Stop Trace Error");
- return err;
-}
-
+++ /dev/null
-/* libltt header file
- *
- * Copyright 2005-
- * Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * Inspired from iptables, by James Morris <jmorris@intercode.com.au>.
- *
- */
-
-#ifndef _LIBLTT_H
-#define _LIBLTT_H
-
-#include <linux/limits.h>
-#include <asm/types.h>
-#include <sys/socket.h>
-#include <linux/netlink.h>
-
-#ifndef NETLINK_LTT
-#define NETLINK_LTT 31
-#endif
-
-
-enum trace_op {
- OP_CREATE,
- OP_DESTROY,
- OP_START,
- OP_STOP,
- OP_NONE
-};
-
-enum trace_mode {
- LTT_TRACE_NORMAL,
- LTT_TRACE_FLIGHT,
- LTT_TRACE_HYBRID
-};
-
-typedef struct lttctl_peer_msg {
- char trace_name[NAME_MAX];
- char trace_type[NAME_MAX];
- enum trace_op op;
- union {
- struct {
- enum trace_mode mode;
- unsigned subbuf_size_low;
- unsigned n_subbufs_low;
- unsigned subbuf_size_med;
- unsigned n_subbufs_med;
- unsigned subbuf_size_high;
- unsigned n_subbufs_high;
- } new_trace;
- } args;
-} lttctl_peer_msg_t;
-
-
-struct lttctl_handle
-{
- int fd;
- //u_int8_t blocking;
- struct sockaddr_nl local;
- struct sockaddr_nl peer;
-};
-
-typedef struct lttctl_resp_msg {
- int err;
-} lttctl_resp_msg_t;
-
-struct lttctl_handle *lttctl_create_handle(void);
-
-int lttctl_destroy_handle(struct lttctl_handle *h);
-
-
-int lttctl_create_trace(const struct lttctl_handle *h,
- char *name, enum trace_mode mode, char *trace_type,
- unsigned subbuf_size_low, unsigned n_subbufs_low,
- unsigned subbuf_size_med, unsigned n_subbufs_med,
- unsigned subbuf_size_high, unsigned n_subbufs_high);
-
-int lttctl_destroy_trace(const struct lttctl_handle *handle, char *name);
-
-int lttctl_start(const struct lttctl_handle *handle, char *name);
-
-int lttctl_stop(const struct lttctl_handle *handle, char *name);
-
-#define LTTCTLM_BASE 0x10
-#define LTTCTLM_CONTROL (LTTCTLM_BASE + 1) /* LTT control message */
-
-
-#endif //_LIBLTT_H
+++ /dev/null
-#! /bin/sh
-
-# libtoolT - Provide generalized library-building support services.
-# Generated automatically by (GNU ltt-control 0.24-17092006)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED="/bin/sed"
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="/bin/sed -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=" CXX"
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host ubuntujov:
-
-# Shell to use when invoking shell scripts.
-SHELL="/bin/sh"
-
-# Whether or not to build shared libraries.
-build_libtool_libs=yes
-
-# Whether or not to build static libraries.
-build_old_libs=yes
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=no
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=no
-
-# Whether or not to optimize for fast installation.
-fast_install=yes
-
-# The host system.
-host_alias=
-host=i686-pc-linux-gnu
-host_os=linux-gnu
-
-# The build system.
-build_alias=
-build=i686-pc-linux-gnu
-build_os=linux-gnu
-
-# An echo program that does not interpret backslashes.
-echo="echo"
-
-# The archiver.
-AR="ar"
-AR_FLAGS="cru"
-
-# A C compiler.
-LTCC="gcc"
-
-# LTCC compiler flags.
-LTCFLAGS="-g -O2"
-
-# A language-specific compiler.
-CC="gcc"
-
-# Is the compiler the GNU C compiler?
-with_gcc=yes
-
-# An ERE matcher.
-EGREP="/bin/grep -E"
-
-# The linker used to build libraries.
-LD="/usr/bin/ld"
-
-# Whether we need hard or soft links.
-LN_S="ln -s"
-
-# A BSD-compatible nm program.
-NM="/usr/bin/nm -B"
-
-# A symbol stripping program
-STRIP="strip"
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=file
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="dlltool"
-
-# Used on cygwin: object dumper.
-OBJDUMP="objdump"
-
-# Used on cygwin: assembler.
-AS="as"
-
-# The name of the directory that contains temporary libtool files.
-objdir=.libs
-
-# How to create reloadable object files.
-reload_flag=" -r"
-reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
-
-# How to pass a linker flag through the compiler.
-wl="-Wl,"
-
-# Object file suffix (normally "o").
-objext="o"
-
-# Old archive suffix (normally "a").
-libext="a"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='.so'
-
-# Executable file suffix (normally "").
-exeext=""
-
-# Additional compiler flags for building library objects.
-pic_flag=" -fPIC -DPIC"
-pic_mode=default
-
-# What is the maximum length of a command?
-max_cmd_len=32768
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o="yes"
-
-# Must we lock files when doing compilation?
-need_locks="no"
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=no
-
-# Do we need a version for libraries?
-need_version=no
-
-# Whether dlopen is supported.
-dlopen_support=unknown
-
-# Whether dlopen of programs is supported.
-dlopen_self=unknown
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=unknown
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="-static"
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=" -fno-builtin"
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="\${wl}--export-dynamic"
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=""
-
-# Library versioning type.
-version_type=linux
-
-# Format of library name prefix.
-libname_spec="lib\$name"
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec="\${libname}\${release}\${shared_ext}\$versuffix \${libname}\${release}\${shared_ext}\$major \$libname\${shared_ext}"
-
-# The coded name of the library, if different from the real name.
-soname_spec="\${libname}\${release}\${shared_ext}\$major"
-
-# Commands used to build and install an old-style archive.
-RANLIB="ranlib"
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
-old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib"
-old_postuninstall_cmds=""
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=""
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=""
-
-# Commands used to build and install a shared archive.
-archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
-archive_expsym_cmds="\$echo \\\"{ global:\\\" > \$output_objdir/\$libname.ver~
- cat \$export_symbols | sed -e \\\"s/\\\\(.*\\\\)/\\\\1;/\\\" >> \$output_objdir/\$libname.ver~
- \$echo \\\"local: *; };\\\" >> \$output_objdir/\$libname.ver~
- \$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-version-script \${wl}\$output_objdir/\$libname.ver -o \$lib"
-postinstall_cmds=""
-postuninstall_cmds=""
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=""
-module_expsym_cmds=""
-
-# Commands to strip libraries.
-old_striplib="strip --strip-debug"
-striplib="strip --strip-unneeded"
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=""
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=""
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=""
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=""
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=""
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method="pass_all"
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd="\$MAGIC_CMD"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=""
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=""
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=""
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'"
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'"
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'"
-
-# This is the shared library runtime path variable.
-runpath_var=LD_RUN_PATH
-
-# This is the shared library path variable.
-shlibpath_var=LD_LIBRARY_PATH
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=no
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=immediate
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=yes
-
-# Flag to hardcode $libdir into a binary during linking.
-# This must work even if $libdir does not exist.
-hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"
-
-# If ld is used when linking, flag to hardcode $libdir into
-# a binary during linking. This must work even if $libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=""
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=""
-
-# Set to yes if using DIR/libNAME during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=no
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=no
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=unsupported
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=no
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=no
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=" /usr/lib/gcc/i486-linux-gnu/4.0.3/ /usr/lib/gcc/i486-linux-gnu/4.0.3/ /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../i486-linux-gnu/lib/i486-linux-gnu/4.0.3/ /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../i486-linux-gnu/lib/ /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../i486-linux-gnu/4.0.3/ /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../ /lib/i486-linux-gnu/4.0.3/ /lib/ /usr/lib/i486-linux-gnu/4.0.3/ /usr/lib/"
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-# Fix the shell variable $srcfile for the compiler.
-fix_srcfile_path=""
-
-# Set to yes if exported symbols are required.
-always_export_symbols=no
-
-# The commands to list exported symbols.
-export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | \$SED 's/.* //' | sort | uniq > \$export_symbols"
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=""
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-
-# Symbols that must always be exported.
-include_expsyms=""
-
-# ### END LIBTOOL CONFIG
-
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION="1.5.22 Debian 1.5.22-4"
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- SP2NL='tr \040 \012'
- NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- SP2NL='tr \100 \n'
- NL2SP='tr \r\n \100\100'
- ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- $echo "$modename: not configured to build any kind of library" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $mkdir "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || {
- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
- exit $EXIT_FAILURE
- }
- fi
-
- $echo "X$my_tmpdir" | $Xsed
-}
-
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case "$@ " in
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit $EXIT_FAILURE
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
-
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
- exit $EXIT_FAILURE
- fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
- my_status=""
-
- $show "${rm}r $my_gentop"
- $run ${rm}r "$my_gentop"
- $show "$mkdir $my_gentop"
- $run $mkdir "$my_gentop"
- my_status=$?
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
- exit $my_status
- fi
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xdir="$my_gentop/$my_xlib"
-
- $show "${rm}r $my_xdir"
- $run ${rm}r "$my_xdir"
- $show "$mkdir $my_xdir"
- $run $mkdir "$my_xdir"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
- exit $exit_status
- fi
- case $host in
- *-darwin*)
- $show "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- if test -z "$run"; then
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
- if test -n "$darwin_arches"; then
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- $show "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- ${rm}r unfat-$$
- cd "$darwin_orig_dir"
- else
- cd "$darwin_orig_dir"
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- fi # $run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
- func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
- arg="$1"
- shift
-
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
- preserve_args="${preserve_args}=$arg"
-
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- $echo "$progname: invalid tag name: $tagname" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $tagname in
- CC)
- # Don't test for the "default" C tag, as we know, it's there, but
- # not specially marked.
- ;;
- *)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
- else
- $echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- esac
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
-
- --version)
- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
- $echo
- $echo "Copyright (C) 2005 Free Software Foundation, Inc."
- $echo "This is free software; see the source for copying conditions. There is NO"
- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $?
- ;;
-
- --config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
- done
- exit $?
- ;;
-
- --debug)
- $echo "$progname: enabling shell trace mode"
- set -x
- preserve_args="$preserve_args $arg"
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- $echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- $echo "enable shared libraries"
- else
- $echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- $echo "enable static libraries"
- else
- $echo "disable static libraries"
- fi
- exit $?
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --preserve-dup-deps) duplicate_deps="yes" ;;
-
- --quiet | --silent)
- show=:
- preserve_args="$preserve_args $arg"
- ;;
-
- --tag)
- prevopt="--tag"
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no)
- ;;
-shared)
- build_libtool_libs=no
- build_old_libs=yes
- ;;
-static)
- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
- ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
- case $nonopt in
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
- suppress_opt=yes
- suppress_output=
- arg_mode=normal
- libobj=
- later=
-
- for arg
- do
- case $arg_mode in
- arg )
- # do not "continue". Instead, add this to base_compile
- lastarg="$arg"
- arg_mode=normal
- ;;
-
- target )
- libobj="$arg"
- arg_mode=normal
- continue
- ;;
-
- normal )
- # Accept any command-line options.
- case $arg in
- -o)
- if test -n "$libobj" ; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit $EXIT_FAILURE
- fi
- arg_mode=target
- continue
- ;;
-
- -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
- continue
- ;;
-
- -no-suppress)
- suppress_opt=no
- continue
- ;;
-
- -Xcompiler)
- arg_mode=arg # the next one goes into the "base_compile" arg list
- continue # The current "srcfile" will either be retained or
- ;; # replaced later. I would guess that would be a bug.
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
- done
- IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
- # Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
- continue
- ;;
-
- * )
- # Accept the current argument as the source file.
- # The previous "srcfile" becomes the current argument.
- #
- lastarg="$srcfile"
- srcfile="$arg"
- ;;
- esac # case $arg
- ;;
- esac # case $arg_mode
-
- # Aesthetically quote the previous argument.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- case $lastarg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, and some SunOS ksh mistreat backslash-escaping
- # in scan sets (worked around with variable expansion),
- # and furthermore cannot handle '|' '&' '(' ')' in scan sets
- # at all, so we specify them separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- lastarg="\"$lastarg\""
- ;;
- esac
-
- base_compile="$base_compile $lastarg"
- done # for arg
-
- case $arg_mode in
- arg)
- $echo "$modename: you must specify an argument for -Xcompile"
- exit $EXIT_FAILURE
- ;;
- target)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit $EXIT_FAILURE
- ;;
- *)
- # Get the name of the library object.
- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSifmso]'
- case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.ii) xform=ii ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- func_infer_tag $base_compile
-
- for arg in $later; do
- case $arg in
- -static)
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
- esac
- done
-
- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
- case $qlibobj in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qlibobj="\"$qlibobj\"" ;;
- esac
- test "X$libobj" != "X$qlibobj" \
- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir=
- else
- xdir=$xdir/
- fi
- lobj=${xdir}$objdir/$objname
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- $run $rm $removelist
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2*)
- pic_mode=default
- ;;
- esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $run ln "$progpath" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- $echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
- $echo "$srcfile" > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
- case $qsrcfile in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qsrcfile="\"$qsrcfile\"" ;;
- esac
-
- $run $rm "$libobj" "${libobj}T"
-
- # Create a libtool object file (analogous to a ".la" file),
- # but don't create it if we're doing a dry run.
- test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $qsrcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- fi
-
- if test ! -d "${xdir}$objdir"; then
- $show "$mkdir ${xdir}$objdir"
- $run $mkdir ${xdir}$objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $exit_status
- fi
- fi
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- command="$command -o $lobj"
- fi
-
- $run $rm "$lobj" "$output_obj"
-
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- $show "$mv $output_obj $lobj"
- if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the PIC object to the libtool object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
- # Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
- fi
- else
- # No PIC object so indicate it doesn't exist in the libtool
- # object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- else
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
- else
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
- fi
-
- $run $mv "${libobj}T" "${libobj}"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- # libtool link mode
- link | relink)
- modename="$modename: link"
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args="$nonopt"
- base_compile="$nonopt $@"
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
- inst_prefix_dir=
-
- avoid_version=no
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- notinst_path= # paths that contain not-installed libtool libraries
- precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
- vinfo_number=no
-
- func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- else
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=built
- fi
- build_libtool_libs=no
- build_old_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test "$#" -gt 0; do
- arg="$1"
- shift
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
- ;;
- *) qarg=$arg ;;
- esac
- libtool_args="$libtool_args $qarg"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case $prev in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- else
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit $EXIT_FAILURE
- fi
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- inst_prefix)
- inst_prefix_dir="$arg"
- prev=
- continue
- ;;
- precious_regex)
- precious_files_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat $save_arg`
- do
-# moreargs="$moreargs $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- done
- else
- $echo "$modename: link input file \`$save_arg' does not exist"
- exit $EXIT_FAILURE
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- xcompiler)
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
- prev=
- compile_command="$compile_command $wl$qarg"
- finalize_command="$finalize_command $wl$qarg"
- continue
- ;;
- xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- shrext)
- shrext_cmds="$arg"
- prev=
- continue
- ;;
- darwin_framework|darwin_framework_skip)
- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- prev=
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi # test -n "$prev"
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: more than one -exported-symbols argument is not allowed"
- exit $EXIT_FAILURE
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -framework|-arch|-isysroot)
- case " $CC " in
- *" ${arg} ${1} "* | *" ${arg} ${1} "*)
- prev=darwin_framework_skip ;;
- *) compiler_flags="$compiler_flags $arg"
- prev=darwin_framework ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -inst-prefix-dir)
- prev=inst_prefix
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix* | /*-*-irix*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- notinst_path="$notinst_path $dir"
- fi
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "*) ;;
- *)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
- # These systems don't actually have a C or math library (as such)
- continue
- ;;
- *-*-os2*)
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs -framework System"
- continue
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
- ;;
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc_r directly, use -pthread flag.
- continue
- ;;
- esac
- fi
- deplibs="$deplibs $arg"
- continue
- ;;
-
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- -model)
- compile_command="$compile_command $arg"
- compiler_flags="$compiler_flags $arg"
- finalize_command="$finalize_command $arg"
- prev=xcompiler
- continue
- ;;
-
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m* pass through architecture-specific compiler args for GCC
- # -m*, -t[45]*, -txscale* pass through architecture-specific
- # compiler args for GCC
- # -pg pass through profiling flag for GCC
- # @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
- -t[45]*|-txscale*|@*)
-
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- compiler_flags="$compiler_flags $arg"
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # The PATH hackery in wrapper scripts is required on Windows
- # in order for the loader to find any dlls it needs.
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
- fast_install=no
- ;;
- *) no_install=yes ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -precious-files-regex)
- prev=precious_regex
- continue
- ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- continue
- ;;
-
- -static)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
- -version-number)
- prev=vinfo
- vinfo_number=yes
- continue
- ;;
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $wl$flag"
- linker_flags="$linker_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- -XCClinker)
- prev=xcclinker
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
-
- *.$objext)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
- prev=
- else
- deplibs="$deplibs $arg"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac # arg
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done # argument parsing loop
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
- # Create the object directory.
- if test ! -d "$output_objdir"; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
- exit $exit_status
- fi
- fi
-
- # Determine the type of output
- case $output in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- case $host in
- *cygwin* | *mingw* | *pw32*)
- # don't eliminate duplications in $postdeps and $predeps
- duplicate_compiler_generated_deps=yes
- ;;
- *)
- duplicate_compiler_generated_deps=$duplicate_deps
- ;;
- esac
- specialdeplibs=
-
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- libs="$libs $deplib"
- done
-
- if test "$linkmode" = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
- # Compute libraries that are listed more than once in $predeps
- # $postdeps and mark them as special (i.e., whose duplicates are
- # not to be eliminated).
- pre_post_deps=
- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
- esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
- done
- fi
- pre_post_deps=
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- notinst_deplibs= # not-installed libtool libraries
- case $linkmode in
- lib)
- passes="conv link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
- for pass in $passes; do
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test "$linkmode" = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link)
- libs="$deplibs %DEPLIBS%"
- test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
- ;;
- esac
- fi
- if test "$pass" = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- compiler_flags="$compiler_flags $deplib"
- fi
- continue
- ;;
- -l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
- continue
- fi
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
- for search_ext in .la $std_shrext .so .a; do
- # Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
- if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
- else
- found=no
- fi
- break 2
- fi
- done
- done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
- # We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $deplib "*)
- if (${SED} -e '2q' $lib |
- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- library_names=
- old_library=
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- for l in $old_library $library_names; do
- ll="$l"
- done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
- lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
- fi
- ;;
- *) ;;
- esac
- fi
- fi
- ;; # -l
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- *)
- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
- ;;
- esac # linkmode
- continue
- ;; # -L
- -R*)
- if test "$pass" = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la) lib="$deplib" ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- if eval $echo \"$deplib\" 2>/dev/null \
- | $SED 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
- fi
- ;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- $echo
- $echo "*** Warning: Trying to link with static lib archive $deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because the file extensions .$libext of this argument makes me believe"
- $echo "*** that it is just a static archive that I should not used here."
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the"
- $echo "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- continue
- ;;
- prog)
- if test "$pass" != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- newdlfiles="$newdlfiles $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
-
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- # If the library was installed with an old release of libtool,
- # it will not redefine variables installed, or shouldnotlink
- installed=yes
- shouldnotlink=no
- avoidtemprpath=
-
-
- # Read the .la file
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
- fi
-
- if test "$pass" = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit $EXIT_FAILURE
- fi
- continue
- fi # $pass = conv
-
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
- else
- newdlfiles="$newdlfiles $lib"
- fi
- continue
- fi # $pass = dlopen
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- abs_ladir="$ladir"
- fi
- ;;
- esac
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- $echo "$modename: warning: library \`$lib' was moved." 1>&2
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$libdir"
- absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- fi
- fi # $installed = yes
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
- # This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
- # Link the convenience library
- if test "$linkmode" = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
- esac
- # Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $absdir" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi # $linkmode,$pass = prog,link...
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes ; then
- use_static_libs=no
- fi
- if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
- if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
- need_relink=yes
- fi
- # This is a shared library
-
- # Warn about portability, can't link against -module's on
- # some systems (darwin)
- if test "$shouldnotlink" = yes && test "$pass" = link ; then
- $echo
- if test "$linkmode" = prog; then
- $echo "*** Warning: Linking the executable $output against the loadable module"
- else
- $echo "*** Warning: Linking the shared library $output against the loadable module"
- fi
- $echo "*** $linklib is not portable!"
- fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- realname="$2"
- shift; shift
- libname=`eval \\$echo \"$libname_spec\"`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin* | mingw*)
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- $show "extracting exported symbol list from \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$extract_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$old_archive_from_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
- if test "$linkmode" = prog || test "$mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
- *-*-darwin* )
- # if the lib is a module then we can not link against
- # it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null |
- $EGREP ": [^:]* bundle" >/dev/null ; then
- $echo "** Warning, lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
- $echo
- $echo "** And there doesn't seem to be a static archive available"
- $echo "** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
- fi
- fi
- esac
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit $EXIT_FAILURE
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test "$linkmode" = prog || test "$mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
- else
- add="$libdir/$linklib"
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- fi
-
- if test "$linkmode" = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test "$linkmode" = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
-
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- $echo
- $echo "*** Warning: This system can not link to static lib archive $lib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
- $echo "*** But as you try to build a module library, libtool will still create "
- $echo "*** a static module, that should work as long as the dlopening application"
- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- else
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi # link shared/static library?
-
- if test "$linkmode" = lib; then
- if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- newlib_search_path="$newlib_search_path $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
-
- if test "$link_all_deplibs" != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$deplib" && dir="."
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- fi
- ;;
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$absdir" != "$libdir"; then
- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
- fi
- path="$absdir"
- fi
- depdepl=
- case $host in
- *-*-darwin*)
- # we do not want to link against static libs,
- # but need to link against shared
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
- done
- if test -f "$path/$depdepl" ; then
- depdepl="$path/$depdepl"
- fi
- # do not add paths which are already there
- case " $newlib_search_path " in
- *" $path "*) ;;
- *) newlib_search_path="$newlib_search_path $path";;
- esac
- fi
- path=""
- ;;
- *)
- path="-L$path"
- ;;
- esac
- ;;
- -l*)
- case $host in
- *-*-darwin*)
- # Again, we only want to link against shared libraries
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
- for tmp in $newlib_search_path ; do
- if test -f "$tmp/lib$tmp_libs.dylib" ; then
- eval depdepl="$tmp/lib$tmp_libs.dylib"
- break
- fi
- done
- path=""
- ;;
- *) continue ;;
- esac
- ;;
- *) continue ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
- esac
- done
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
- # that some nasty dependency loop isn't accidentally
- # broken:
- #new_libs="$deplib $new_libs"
- # Pragmatically, this seems to cause very few problems in
- # practice:
- case $deplib in
- -L*) new_libs="$deplib $new_libs" ;;
- -R*) ;;
- *)
- # And here is the reason: when a library appears more
- # than once as an explicit dependence of a library, or
- # is implicitly linked in more than once by the
- # compiler, it is considered special, and multiple
- # occurrences thereof are not removed. Compare this
- # with having the same library being listed as a
- # dependency of multiple other libraries: in this case,
- # we know (pedantically, we assume) the library does not
- # need to be listed more than once, so we keep only the
- # last copy. This is not always right, but it is rare
- # enough that we require users that really mean to play
- # such unportable linking tricks to link the library
- # using -Wl,-lname, so that libtool does not consider it
- # for duplicate removal.
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
- # (they stay in deplibs)
- tmp_libs=
- for i in $dependency_libs ; do
- case " $predeps $postdeps $compiler_lib_search_path " in
- *" $i "*)
- i=""
- ;;
- esac
- if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
- fi
- done
- dependency_libs=$tmp_libs
- done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
-
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
- fi
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- objs="$objs$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
- exit $EXIT_FAILURE
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the non-libtool"
- $echo "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
- fi
- fi
-
- if test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
- fi
-
- set dummy $rpath
- if test "$#" -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
- fi
- else
-
- # Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # convert absolute version numbers to libtool ages
- # this retains compatibility with .la files and attempts
- # to make the code below a bit more comprehensible
-
- case $vinfo_number in
- yes)
- number_major="$2"
- number_minor="$3"
- number_revision="$4"
- #
- # There are really only two kinds -- those that
- # use the current revision as the major version
- # and those that subtract age and use age as
- # a minor version. But, then there is irix
- # which has an extra 1 added just for fun
- #
- case $version_type in
- darwin|linux|osf|windows)
- current=`expr $number_major + $number_minor`
- age="$number_minor"
- revision="$number_revision"
- ;;
- freebsd-aout|freebsd-elf|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
- ;;
- irix|nonstopux)
- current=`expr $number_major + $number_minor - 1`
- age="$number_minor"
- revision="$number_minor"
- ;;
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- ;;
- no)
- current="$2"
- revision="$3"
- age="$4"
- ;;
- esac
-
- # Check that each of the things are valid numbers.
- case $current in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $revision in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $age in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test "$age" -gt "$current"; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
- irix | nonstopux)
- major=`expr $current - $age + 1`
-
- case $version_type in
- nonstopux) verstring_prefix=nonstopux ;;
- *) verstring_prefix=sgi ;;
- esac
- verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- major=.`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- case $version_type in
- darwin)
- # we can't check for "0.0" in archive_cmds due to quoting
- # problems, so we reset it completely
- verstring=
- ;;
- *)
- verstring="0.0"
- ;;
- esac
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
- fi
-
- if test "$mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`$echo "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
- continue
- fi
- fi
- removelist="$removelist $p"
- ;;
- *) ;;
- esac
- done
- if test -n "$removelist"; then
- $show "${rm}r $removelist"
- $run ${rm}r $removelist
- fi
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
- deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
- done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $rm conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
- if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" -ne "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which I believe you do not have"
- $echo "*** because a test_compile did reveal that the linker did not use it for"
- $echo "*** its dynamic dependency list that programs get resolved with at runtime."
- fi
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
- # Error occurred in the first compile. Let's try to salvage
- # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- $rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $i
- # Did it work?
- if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because a test_compile did reveal that the linker did not use this one"
- $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
- fi
- fi
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
- $echo "*** library that it depends on before this library will be fully"
- $echo "*** functional. Installing it before continuing would be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for file magic test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a file magic. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval $echo \"$potent_lib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a regex pattern. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
- # can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
- done
- fi
- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
- | grep . >/dev/null; then
- $echo
- if test "X$deplibs_check_method" = "Xnone"; then
- $echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- $echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- $echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- fi
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- $echo
- $echo "*** Warning: libtool could not satisfy all declared inter-library"
- $echo "*** dependencies of module $libname. Therefore, libtool will create"
- $echo "*** a static module, that should work as long as the dlopening"
- $echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- $echo "*** The inter-library dependencies that have been dropped here will be"
- $echo "*** automatically added whenever a program is linked with this library"
- $echo "*** or is declared to -dlopen it."
-
- if test "$allow_undefined" = no; then
- $echo
- $echo "*** Since this library must not contain undefined symbols,"
- $echo "*** because either the platform does not support them or"
- $echo "*** it was explicitly requested with -no-undefined,"
- $echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- deplibs="$new_libs"
-
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- if test "$hardcode_into_libs" = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- if test -n "$hardcode_libdir_flag_spec_ld"; then
- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
- else
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test -z "$dlname"; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- linknames=
- for link
- do
- linknames="$linknames $link"
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- if len=`expr "X$cmd" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- $show "$cmd"
- $run eval "$cmd" || exit $?
- skipped_export=false
- else
- # The command line is too long to execute in one step.
- $show "using reloadable object file for export list..."
- skipped_export=:
- # Break out early, otherwise skipped_export may be
- # set to false by a later but shorter cmd.
- break
- fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
- tmp_deplibs=
- for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- tmp_deplibs="$tmp_deplibs $test_deplib"
- ;;
- esac
- done
- deplibs="$tmp_deplibs"
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
- eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-
- if test "X$skipped_export" != "X:" &&
- len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
- else
- # The command line is too long to link in one step, link piecewise.
- $echo "creating reloadable object files..."
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
- output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- delfiles=
- last_robj=
- k=1
- output=$output_objdir/$output_la-${k}.$objext
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
- if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; }; then
- objlist="$objlist $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- k=`expr $k + 1`
- output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
- len=1
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
- if ${skipped_export-false}; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
- fi
-
- # Set up a command to remove the reloadable object files
- # after they are used.
- i=0
- while test "$i" -lt "$k"
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
- done
-
- $echo "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- cmds=$module_expsym_cmds
- else
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
- fi
- fi
-
- # Append the command to remove the reloadable object files
- # to the just-reset $cmds.
- eval cmds=\"\$cmds~\$rm $delfiles\"
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-
- if test -n "$convenience"; then
- if test -z "$whole_archive_flag_spec"; then
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- fi
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
- case $output in
- *.lo)
- if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit $EXIT_FAILURE
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $run eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- prog)
- case $host in
- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
- esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
-
- if test "$preload" = yes; then
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
- fi
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- case $host in
- *darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- if test "$tagname" = CXX ; then
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
- fi
- ;;
- esac
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $compile_deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $compile_deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- compile_deplibs="$new_libs"
-
-
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- fi
-
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
- fi
- fi
-
- if test -n "$dlsyms"; then
- case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- else
- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
- $run eval '$echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
- $echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
- case $host in
- *cygwin* | *mingw* )
- $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs */
-struct {
-"
- ;;
- * )
- $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
- ;;
- esac
-
-
- $echo >> "$output_objdir/$dlsyms" "\
- const char *name;
- lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- case $host in
- *cygwin* | *mingw* )
- if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
- else
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- fi
- ;;
- * )
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- ;;
- esac
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- exit_status=$?
-
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
- exit $exit_status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- # Delete the old output file.
- $run $rm $output
- # Link the executable and exit
- $show "$link_command"
- $run eval "$link_command" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- $show "$link_command"
- $run eval "$link_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*)
- exeext=.exe
- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
- *) exeext= ;;
- esac
- case $host in
- *cygwin* | *mingw* )
- output_name=`basename $output`
- output_path=`dirname $output`
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
- cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "/bin/sh $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
-*/
-EOF
- cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS. */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- DEBUG("(main) argv[0] : %s\n",argv[0]);
- DEBUG("(main) program_name : %s\n",program_name);
- newargz = XMALLOC(char *, argc+2);
-EOF
-
- cat >> $cwrappersource <<EOF
- newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
- cat >> $cwrappersource <<"EOF"
- newargz[1] = find_executable(argv[0]);
- if (newargz[1] == NULL)
- lt_fatal("Couldn't find %s", argv[0]);
- DEBUG("(main) found exe at : %s\n",newargz[1]);
- /* we know the script has the same name, without the .exe */
- /* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
- for (i = 1; i < argc; i++)
- newargz[i+1] = xstrdup(argv[i]);
- newargz[argc+1] = NULL;
-
- for (i=0; i<argc+1; i++)
- {
- DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
- ;
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",(char const **)newargz);
-EOF
- ;;
- *)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",newargz);
-EOF
- ;;
- esac
-
- cat >> $cwrappersource <<"EOF"
- return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
- void * p = (void *) malloc (num);
- if (!p)
- lt_fatal ("Memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char)name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable(const char * path)
-{
- struct stat st;
-
- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0) &&
- (
- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
- ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
- ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
- ((st.st_mode & S_IXUSR) == S_IXUSR))
- )
- return 1;
- else
- return 0;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
- int has_slash = 0;
- const char* p;
- const char* p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char* concat_name;
-
- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char* path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char* q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR(*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert(str != NULL);
- assert(pat != NULL);
-
- len = strlen(str);
- patlen = strlen(pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp(str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
- const char * message, va_list ap)
-{
- fprintf (stderr, "%s: %s: ", program_name, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
- va_end (ap);
-}
-EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $echo >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- $echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
- exit $EXIT_FAILURE
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- $echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $echo >> $output "\
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $echo >> $output "\
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
- exit $EXIT_FAILURE
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- $echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit $EXIT_FAILURE
- fi
-fi\
-"
- chmod +x $output
- fi
- exit $EXIT_SUCCESS
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$old_deplibs $non_pic_objects"
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=$old_archive_from_new_cmds
- else
- # POSIX demands no paths to be encoded in archives. We have
- # to avoid creating archives with duplicate basenames if we
- # might have to extract them afterwards, e.g., when creating a
- # static archive out of a convenience library, or when linking
- # the entirety of a libtool archive into another (currently
- # not supported by libtool).
- if (for obj in $oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "copying selected object files to avoid basename conflicts..."
-
- if test -z "$gentop"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
- exit $exit_status
- fi
- fi
-
- save_oldobjs=$oldobjs
- oldobjs=
- counter=1
- for obj in $save_oldobjs
- do
- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- case " $oldobjs " in
- " ") oldobjs=$obj ;;
- *[\ /]"$objbase "*)
- while :; do
- # Make sure we don't pick an alternate name that also
- # overlaps.
- newobj=lt$counter-$objbase
- counter=`expr $counter + 1`
- case " $oldobjs " in
- *[\ /]"$newobj "*) ;;
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;
- esac
- done
- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- $run ln "$obj" "$gentop/$newobj" ||
- $run cp "$obj" "$gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
- ;;
- *) oldobjs="$oldobjs $obj" ;;
- esac
- done
- fi
-
- eval cmds=\"$old_archive_cmds\"
-
- if len=`expr "X$cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- $echo "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
-
- # Is there a better way of finding the last object in the list?
- for obj in $save_oldobjs
- do
- last_oldobj=$obj
- done
- for obj in $save_oldobjs
- do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
- eval cmds=\"\$concat_cmds\"
- else
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- eval cmd=\"$cmd\"
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
-
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdependency_libs="$newdependency_libs $libdir/$name"
- ;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
- for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlfiles="$newdlfiles $libdir/$name"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlprefiles="$newdlprefiles $libdir/$name"
- done
- dlprefiles="$newdlprefiles"
- else
- newdlfiles=
- for lib in $dlfiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlfiles="$newdlfiles $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlprefiles="$newdlprefiles $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
- $rm $output
- # place dlname in correct position for cygwin
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
- esac
- $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
- $echo >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
- ;;
- esac
- exit $EXIT_SUCCESS
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg=$nonopt
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest=$arg
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f)
- case " $install_prog " in
- *[\\\ /]cp\ *) ;;
- *) prev=$arg ;;
- esac
- ;;
- -g | -m | -o) prev=$arg ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*)
- ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest=$arg
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test "$#" -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- library_names=
- old_library=
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- if test "$inst_prefix_dir" = "$destdir"; then
- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
- else
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
- fi
-
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$srcname $destdir/$realname"
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run eval "$striplib $destdir/$realname" || exit $?
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
- # the symlink we replace! Solaris /bin/ln does not understand -f,
- # so we also need to try rm && ln -s.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- cmds=$postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- file=`$echo $file|${SED} 's,.exe$,,'`
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin*|*mingw*)
- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
- notinst_deplibs=
- relink_command=
-
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$notinst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- relink_command=
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir=`func_mktempdir`
- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyway
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
- ;;
- esac
- ;;
- esac
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- $show "$old_striplib $oldlib"
- $run eval "$old_striplib $oldlib" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- cmds=$old_postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- cmds=$finish_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- test "$show" = : && exit $EXIT_SUCCESS
-
- $echo "X----------------------------------------------------------------------" | $Xsed
- $echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $echo " $libdir"
- done
- $echo
- $echo "If you ever happen to want to link against installed libraries"
- $echo "in a given directory, LIBDIR, you must either use libtool, and"
- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $echo " during execution"
- fi
- if test -n "$runpath_var"; then
- $echo " - add LIBDIR to the \`$runpath_var' environment variable"
- $echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- $echo
- $echo "See any operating system documentation about shared libraries for"
- $echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "X----------------------------------------------------------------------" | $Xsed
- exit $EXIT_SUCCESS
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit $EXIT_FAILURE
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- dir=
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool clean and uninstall mode
- clean | uninstall)
- modename="$modename: $mode"
- rm="$nonopt"
- files=
- rmforce=
- exit_status=0
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -f) rm="$rm $arg"; rmforce=yes ;;
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- rmdirs=
-
- origobjdir="$objdir"
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$file"; then
- dir=.
- objdir="$origobjdir"
- else
- objdir="$dir/$origobjdir"
- fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test "$mode" = uninstall && objdir="$dir"
-
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
- case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
- esac
- fi
-
- # Don't error if the file doesn't exist and rm -f was used.
- if (test -L "$file") >/dev/null 2>&1 \
- || (test -h "$file") >/dev/null 2>&1 \
- || test -f "$file"; then
- :
- elif test -d "$file"; then
- exit_status=1
- continue
- elif test "$rmforce" = yes; then
- continue
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
- done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
- case "$mode" in
- clean)
- case " $library_names " in
- # " " in the beginning catches empty $dlname
- *" $dlname "*) ;;
- *) rmfiles="$rmfiles $objdir/$dlname" ;;
- esac
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- ;;
- uninstall)
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- cmds=$postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- cmds=$old_postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
- # FIXME: should reinstall the best remaining shared library.
- ;;
- esac
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
- # Read the .lo file
- . $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" \
- && test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" \
- && test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- if test "$mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
- file=`$echo $file|${SED} 's,.exe$,,'`
- noexename=`$echo $name|${SED} 's,.exe$,,'`
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
- rmfiles="$rmfiles $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$noexename
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
- fi
- fi
- fi
- ;;
- esac
- $show "$rm $rmfiles"
- $run $rm $rmfiles || exit_status=1
- done
- objdir="$origobjdir"
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- $show "rmdir $dir"
- $run rmdir $dir >/dev/null 2>&1
- fi
- done
-
- exit $exit_status
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test -z "$exec_cmd"; then
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
- eval exec $exec_cmd
- exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --tag=TAG use configuration variables from tag TAG
- --version print version information
-
-MODE must be one of the following:
-
- clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
- exit $EXIT_SUCCESS
- ;;
-
-clean)
- $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
-# ### BEGIN LIBTOOL TAG CONFIG: CXX
-
-# Libtool was configured on host ubuntujov:
-
-# Shell to use when invoking shell scripts.
-SHELL="/bin/sh"
-
-# Whether or not to build shared libraries.
-build_libtool_libs=yes
-
-# Whether or not to build static libraries.
-build_old_libs=yes
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=no
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=no
-
-# Whether or not to optimize for fast installation.
-fast_install=yes
-
-# The host system.
-host_alias=
-host=i686-pc-linux-gnu
-host_os=linux-gnu
-
-# The build system.
-build_alias=
-build=i686-pc-linux-gnu
-build_os=linux-gnu
-
-# An echo program that does not interpret backslashes.
-echo="echo"
-
-# The archiver.
-AR="ar"
-AR_FLAGS="cru"
-
-# A C compiler.
-LTCC="gcc"
-
-# LTCC compiler flags.
-LTCFLAGS="-g -O2"
-
-# A language-specific compiler.
-CC="g++"
-
-# Is the compiler the GNU C compiler?
-with_gcc=yes
-
-# An ERE matcher.
-EGREP="/bin/grep -E"
-
-# The linker used to build libraries.
-LD="/usr/bin/ld"
-
-# Whether we need hard or soft links.
-LN_S="ln -s"
-
-# A BSD-compatible nm program.
-NM="/usr/bin/nm -B"
-
-# A symbol stripping program
-STRIP="strip"
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=file
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="dlltool"
-
-# Used on cygwin: object dumper.
-OBJDUMP="objdump"
-
-# Used on cygwin: assembler.
-AS="as"
-
-# The name of the directory that contains temporary libtool files.
-objdir=.libs
-
-# How to create reloadable object files.
-reload_flag=" -r"
-reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
-
-# How to pass a linker flag through the compiler.
-wl="-Wl,"
-
-# Object file suffix (normally "o").
-objext="o"
-
-# Old archive suffix (normally "a").
-libext="a"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='.so'
-
-# Executable file suffix (normally "").
-exeext=""
-
-# Additional compiler flags for building library objects.
-pic_flag=" -fPIC -DPIC"
-pic_mode=default
-
-# What is the maximum length of a command?
-max_cmd_len=32768
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o="yes"
-
-# Must we lock files when doing compilation?
-need_locks="no"
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=no
-
-# Do we need a version for libraries?
-need_version=no
-
-# Whether dlopen is supported.
-dlopen_support=unknown
-
-# Whether dlopen of programs is supported.
-dlopen_self=unknown
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=unknown
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="-static"
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=" -fno-builtin"
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="\${wl}--export-dynamic"
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=""
-
-# Library versioning type.
-version_type=linux
-
-# Format of library name prefix.
-libname_spec="lib\$name"
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec="\${libname}\${release}\${shared_ext}\$versuffix \${libname}\${release}\${shared_ext}\$major \$libname\${shared_ext}"
-
-# The coded name of the library, if different from the real name.
-soname_spec="\${libname}\${release}\${shared_ext}\$major"
-
-# Commands used to build and install an old-style archive.
-RANLIB="ranlib"
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
-old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib"
-old_postuninstall_cmds=""
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=""
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=""
-
-# Commands used to build and install a shared archive.
-archive_cmds="\$CC -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
-archive_expsym_cmds="\$CC -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
-postinstall_cmds=""
-postuninstall_cmds=""
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=""
-module_expsym_cmds=""
-
-# Commands to strip libraries.
-old_striplib="strip --strip-debug"
-striplib="strip --strip-unneeded"
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects="/usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../lib/crti.o /usr/lib/gcc/i486-linux-gnu/4.0.3/crtbeginS.o"
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects="/usr/lib/gcc/i486-linux-gnu/4.0.3/crtendS.o /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../lib/crtn.o"
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=""
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps="-lstdc++ -lm -lgcc_s -lc -lgcc_s"
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path="-L/usr/lib/gcc/i486-linux-gnu/4.0.3 -L/usr/lib/gcc/i486-linux-gnu/4.0.3 -L/usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../lib -L/usr/lib/gcc/i486-linux-gnu/4.0.3/../../.. -L/lib/../lib -L/usr/lib/../lib"
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method="pass_all"
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd="\$MAGIC_CMD"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=""
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=""
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=""
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'"
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'"
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'"
-
-# This is the shared library runtime path variable.
-runpath_var=LD_RUN_PATH
-
-# This is the shared library path variable.
-shlibpath_var=LD_LIBRARY_PATH
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=no
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=immediate
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=yes
-
-# Flag to hardcode $libdir into a binary during linking.
-# This must work even if $libdir does not exist.
-hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"
-
-# If ld is used when linking, flag to hardcode $libdir into
-# a binary during linking. This must work even if $libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=""
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=""
-
-# Set to yes if using DIR/libNAME during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=no
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=no
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=unsupported
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=no
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=no
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=" /usr/lib/gcc/i486-linux-gnu/4.0.3/ /usr/lib/gcc/i486-linux-gnu/4.0.3/ /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../i486-linux-gnu/lib/i486-linux-gnu/4.0.3/ /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../i486-linux-gnu/lib/ /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../i486-linux-gnu/4.0.3/ /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../ /lib/i486-linux-gnu/4.0.3/ /lib/ /usr/lib/i486-linux-gnu/4.0.3/ /usr/lib/"
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-# Fix the shell variable $srcfile for the compiler.
-fix_srcfile_path=""
-
-# Set to yes if exported symbols are required.
-always_export_symbols=no
-
-# The commands to list exported symbols.
-export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | \$SED 's/.* //' | sort | uniq > \$export_symbols"
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=""
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=""
-
-# Symbols that must always be exported.
-include_expsyms=""
-
-# ### END LIBTOOL TAG CONFIG: CXX
-
+++ /dev/null
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION="1.5.22 Debian 1.5.22-4"
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes.
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- SP2NL='tr \040 \012'
- NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- SP2NL='tr \100 \n'
- NL2SP='tr \r\n \100\100'
- ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- $echo "$modename: not configured to build any kind of library" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $mkdir "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || {
- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
- exit $EXIT_FAILURE
- }
- fi
-
- $echo "X$my_tmpdir" | $Xsed
-}
-
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case "$@ " in
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit $EXIT_FAILURE
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
-
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
- exit $EXIT_FAILURE
- fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
- my_status=""
-
- $show "${rm}r $my_gentop"
- $run ${rm}r "$my_gentop"
- $show "$mkdir $my_gentop"
- $run $mkdir "$my_gentop"
- my_status=$?
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
- exit $my_status
- fi
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xdir="$my_gentop/$my_xlib"
-
- $show "${rm}r $my_xdir"
- $run ${rm}r "$my_xdir"
- $show "$mkdir $my_xdir"
- $run $mkdir "$my_xdir"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
- exit $exit_status
- fi
- case $host in
- *-darwin*)
- $show "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- if test -z "$run"; then
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
- if test -n "$darwin_arches"; then
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- $show "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- ${rm}r unfat-$$
- cd "$darwin_orig_dir"
- else
- cd "$darwin_orig_dir"
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- fi # $run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
- func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
- arg="$1"
- shift
-
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
- preserve_args="${preserve_args}=$arg"
-
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- $echo "$progname: invalid tag name: $tagname" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $tagname in
- CC)
- # Don't test for the "default" C tag, as we know, it's there, but
- # not specially marked.
- ;;
- *)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
- else
- $echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- esac
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
-
- --version)
- $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
- $echo
- $echo "Copyright (C) 2005 Free Software Foundation, Inc."
- $echo "This is free software; see the source for copying conditions. There is NO"
- $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $?
- ;;
-
- --config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
- done
- exit $?
- ;;
-
- --debug)
- $echo "$progname: enabling shell trace mode"
- set -x
- preserve_args="$preserve_args $arg"
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- $echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- $echo "enable shared libraries"
- else
- $echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- $echo "enable static libraries"
- else
- $echo "disable static libraries"
- fi
- exit $?
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --preserve-dup-deps) duplicate_deps="yes" ;;
-
- --quiet | --silent)
- show=:
- preserve_args="$preserve_args $arg"
- ;;
-
- --tag)
- prevopt="--tag"
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no)
- ;;
-shared)
- build_libtool_libs=no
- build_old_libs=yes
- ;;
-static)
- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
- ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
- case $nonopt in
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
- suppress_opt=yes
- suppress_output=
- arg_mode=normal
- libobj=
- later=
-
- for arg
- do
- case $arg_mode in
- arg )
- # do not "continue". Instead, add this to base_compile
- lastarg="$arg"
- arg_mode=normal
- ;;
-
- target )
- libobj="$arg"
- arg_mode=normal
- continue
- ;;
-
- normal )
- # Accept any command-line options.
- case $arg in
- -o)
- if test -n "$libobj" ; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit $EXIT_FAILURE
- fi
- arg_mode=target
- continue
- ;;
-
- -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
- continue
- ;;
-
- -no-suppress)
- suppress_opt=no
- continue
- ;;
-
- -Xcompiler)
- arg_mode=arg # the next one goes into the "base_compile" arg list
- continue # The current "srcfile" will either be retained or
- ;; # replaced later. I would guess that would be a bug.
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
- done
- IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
- # Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
- continue
- ;;
-
- * )
- # Accept the current argument as the source file.
- # The previous "srcfile" becomes the current argument.
- #
- lastarg="$srcfile"
- srcfile="$arg"
- ;;
- esac # case $arg
- ;;
- esac # case $arg_mode
-
- # Aesthetically quote the previous argument.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- case $lastarg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, and some SunOS ksh mistreat backslash-escaping
- # in scan sets (worked around with variable expansion),
- # and furthermore cannot handle '|' '&' '(' ')' in scan sets
- # at all, so we specify them separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- lastarg="\"$lastarg\""
- ;;
- esac
-
- base_compile="$base_compile $lastarg"
- done # for arg
-
- case $arg_mode in
- arg)
- $echo "$modename: you must specify an argument for -Xcompile"
- exit $EXIT_FAILURE
- ;;
- target)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit $EXIT_FAILURE
- ;;
- *)
- # Get the name of the library object.
- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSifmso]'
- case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.ii) xform=ii ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- func_infer_tag $base_compile
-
- for arg in $later; do
- case $arg in
- -static)
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
- esac
- done
-
- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
- case $qlibobj in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qlibobj="\"$qlibobj\"" ;;
- esac
- test "X$libobj" != "X$qlibobj" \
- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir=
- else
- xdir=$xdir/
- fi
- lobj=${xdir}$objdir/$objname
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- $run $rm $removelist
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2*)
- pic_mode=default
- ;;
- esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $run ln "$progpath" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- $echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
- $echo "$srcfile" > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
- case $qsrcfile in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qsrcfile="\"$qsrcfile\"" ;;
- esac
-
- $run $rm "$libobj" "${libobj}T"
-
- # Create a libtool object file (analogous to a ".la" file),
- # but don't create it if we're doing a dry run.
- test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $qsrcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- fi
-
- if test ! -d "${xdir}$objdir"; then
- $show "$mkdir ${xdir}$objdir"
- $run $mkdir ${xdir}$objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $exit_status
- fi
- fi
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- command="$command -o $lobj"
- fi
-
- $run $rm "$lobj" "$output_obj"
-
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- $show "$mv $output_obj $lobj"
- if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the PIC object to the libtool object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
- # Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
- fi
- else
- # No PIC object so indicate it doesn't exist in the libtool
- # object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- else
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
- else
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
- fi
-
- $run $mv "${libobj}T" "${libobj}"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- # libtool link mode
- link | relink)
- modename="$modename: link"
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args="$nonopt"
- base_compile="$nonopt $@"
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
- inst_prefix_dir=
-
- avoid_version=no
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- notinst_path= # paths that contain not-installed libtool libraries
- precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
- vinfo_number=no
-
- func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- else
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=built
- fi
- build_libtool_libs=no
- build_old_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test "$#" -gt 0; do
- arg="$1"
- shift
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
- ;;
- *) qarg=$arg ;;
- esac
- libtool_args="$libtool_args $qarg"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case $prev in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- else
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit $EXIT_FAILURE
- fi
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- inst_prefix)
- inst_prefix_dir="$arg"
- prev=
- continue
- ;;
- precious_regex)
- precious_files_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat $save_arg`
- do
-# moreargs="$moreargs $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- done
- else
- $echo "$modename: link input file \`$save_arg' does not exist"
- exit $EXIT_FAILURE
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- xcompiler)
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
- prev=
- compile_command="$compile_command $wl$qarg"
- finalize_command="$finalize_command $wl$qarg"
- continue
- ;;
- xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- shrext)
- shrext_cmds="$arg"
- prev=
- continue
- ;;
- darwin_framework|darwin_framework_skip)
- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- prev=
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi # test -n "$prev"
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: more than one -exported-symbols argument is not allowed"
- exit $EXIT_FAILURE
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -framework|-arch|-isysroot)
- case " $CC " in
- *" ${arg} ${1} "* | *" ${arg} ${1} "*)
- prev=darwin_framework_skip ;;
- *) compiler_flags="$compiler_flags $arg"
- prev=darwin_framework ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -inst-prefix-dir)
- prev=inst_prefix
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix* | /*-*-irix*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- notinst_path="$notinst_path $dir"
- fi
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "*) ;;
- *)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
- # These systems don't actually have a C or math library (as such)
- continue
- ;;
- *-*-os2*)
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs -framework System"
- continue
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
- ;;
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc_r directly, use -pthread flag.
- continue
- ;;
- esac
- fi
- deplibs="$deplibs $arg"
- continue
- ;;
-
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- -model)
- compile_command="$compile_command $arg"
- compiler_flags="$compiler_flags $arg"
- finalize_command="$finalize_command $arg"
- prev=xcompiler
- continue
- ;;
-
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m* pass through architecture-specific compiler args for GCC
- # -m*, -t[45]*, -txscale* pass through architecture-specific
- # compiler args for GCC
- # -pg pass through profiling flag for GCC
- # @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
- -t[45]*|-txscale*|@*)
-
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- compiler_flags="$compiler_flags $arg"
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # The PATH hackery in wrapper scripts is required on Windows
- # in order for the loader to find any dlls it needs.
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
- fast_install=no
- ;;
- *) no_install=yes ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -precious-files-regex)
- prev=precious_regex
- continue
- ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- continue
- ;;
-
- -static)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
- -version-number)
- prev=vinfo
- vinfo_number=yes
- continue
- ;;
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $wl$flag"
- linker_flags="$linker_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- -XCClinker)
- prev=xcclinker
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
-
- *.$objext)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
- prev=
- else
- deplibs="$deplibs $arg"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac # arg
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done # argument parsing loop
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
- # Create the object directory.
- if test ! -d "$output_objdir"; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
- exit $exit_status
- fi
- fi
-
- # Determine the type of output
- case $output in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- case $host in
- *cygwin* | *mingw* | *pw32*)
- # don't eliminate duplications in $postdeps and $predeps
- duplicate_compiler_generated_deps=yes
- ;;
- *)
- duplicate_compiler_generated_deps=$duplicate_deps
- ;;
- esac
- specialdeplibs=
-
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- libs="$libs $deplib"
- done
-
- if test "$linkmode" = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
- # Compute libraries that are listed more than once in $predeps
- # $postdeps and mark them as special (i.e., whose duplicates are
- # not to be eliminated).
- pre_post_deps=
- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
- esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
- done
- fi
- pre_post_deps=
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- notinst_deplibs= # not-installed libtool libraries
- case $linkmode in
- lib)
- passes="conv link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
- for pass in $passes; do
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test "$linkmode" = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link)
- libs="$deplibs %DEPLIBS%"
- test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
- ;;
- esac
- fi
- if test "$pass" = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- compiler_flags="$compiler_flags $deplib"
- fi
- continue
- ;;
- -l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
- continue
- fi
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
- for search_ext in .la $std_shrext .so .a; do
- # Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
- if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
- else
- found=no
- fi
- break 2
- fi
- done
- done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
- # We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $deplib "*)
- if (${SED} -e '2q' $lib |
- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- library_names=
- old_library=
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- for l in $old_library $library_names; do
- ll="$l"
- done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
- lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
- fi
- ;;
- *) ;;
- esac
- fi
- fi
- ;; # -l
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- ;;
- *)
- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
- ;;
- esac # linkmode
- continue
- ;; # -L
- -R*)
- if test "$pass" = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la) lib="$deplib" ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- if eval $echo \"$deplib\" 2>/dev/null \
- | $SED 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
- fi
- ;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- $echo
- $echo "*** Warning: Trying to link with static lib archive $deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because the file extensions .$libext of this argument makes me believe"
- $echo "*** that it is just a static archive that I should not used here."
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the"
- $echo "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- continue
- ;;
- prog)
- if test "$pass" != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- newdlfiles="$newdlfiles $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
-
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- # If the library was installed with an old release of libtool,
- # it will not redefine variables installed, or shouldnotlink
- installed=yes
- shouldnotlink=no
- avoidtemprpath=
-
-
- # Read the .la file
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
- fi
-
- if test "$pass" = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit $EXIT_FAILURE
- fi
- continue
- fi # $pass = conv
-
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
- else
- newdlfiles="$newdlfiles $lib"
- fi
- continue
- fi # $pass = dlopen
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- abs_ladir="$ladir"
- fi
- ;;
- esac
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- $echo "$modename: warning: library \`$lib' was moved." 1>&2
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$libdir"
- absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- fi
- fi # $installed = yes
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
- # This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
- # Link the convenience library
- if test "$linkmode" = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
- esac
- # Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $absdir" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi # $linkmode,$pass = prog,link...
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes ; then
- use_static_libs=no
- fi
- if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
- if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
- need_relink=yes
- fi
- # This is a shared library
-
- # Warn about portability, can't link against -module's on
- # some systems (darwin)
- if test "$shouldnotlink" = yes && test "$pass" = link ; then
- $echo
- if test "$linkmode" = prog; then
- $echo "*** Warning: Linking the executable $output against the loadable module"
- else
- $echo "*** Warning: Linking the shared library $output against the loadable module"
- fi
- $echo "*** $linklib is not portable!"
- fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- realname="$2"
- shift; shift
- libname=`eval \\$echo \"$libname_spec\"`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin* | mingw*)
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- $show "extracting exported symbol list from \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$extract_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$old_archive_from_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
- if test "$linkmode" = prog || test "$mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
- *-*-darwin* )
- # if the lib is a module then we can not link against
- # it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null |
- $EGREP ": [^:]* bundle" >/dev/null ; then
- $echo "** Warning, lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
- $echo
- $echo "** And there doesn't seem to be a static archive available"
- $echo "** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
- fi
- fi
- esac
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit $EXIT_FAILURE
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test "$linkmode" = prog || test "$mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
- else
- add="$libdir/$linklib"
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- fi
-
- if test "$linkmode" = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test "$linkmode" = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
-
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- $echo
- $echo "*** Warning: This system can not link to static lib archive $lib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
- $echo "*** But as you try to build a module library, libtool will still create "
- $echo "*** a static module, that should work as long as the dlopening application"
- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- else
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi # link shared/static library?
-
- if test "$linkmode" = lib; then
- if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- newlib_search_path="$newlib_search_path $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
-
- if test "$link_all_deplibs" != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$deplib" && dir="."
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- absdir="$dir"
- fi
- ;;
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$absdir" != "$libdir"; then
- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
- fi
- path="$absdir"
- fi
- depdepl=
- case $host in
- *-*-darwin*)
- # we do not want to link against static libs,
- # but need to link against shared
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
- done
- if test -f "$path/$depdepl" ; then
- depdepl="$path/$depdepl"
- fi
- # do not add paths which are already there
- case " $newlib_search_path " in
- *" $path "*) ;;
- *) newlib_search_path="$newlib_search_path $path";;
- esac
- fi
- path=""
- ;;
- *)
- path="-L$path"
- ;;
- esac
- ;;
- -l*)
- case $host in
- *-*-darwin*)
- # Again, we only want to link against shared libraries
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
- for tmp in $newlib_search_path ; do
- if test -f "$tmp/lib$tmp_libs.dylib" ; then
- eval depdepl="$tmp/lib$tmp_libs.dylib"
- break
- fi
- done
- path=""
- ;;
- *) continue ;;
- esac
- ;;
- *) continue ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
- esac
- done
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
- # that some nasty dependency loop isn't accidentally
- # broken:
- #new_libs="$deplib $new_libs"
- # Pragmatically, this seems to cause very few problems in
- # practice:
- case $deplib in
- -L*) new_libs="$deplib $new_libs" ;;
- -R*) ;;
- *)
- # And here is the reason: when a library appears more
- # than once as an explicit dependence of a library, or
- # is implicitly linked in more than once by the
- # compiler, it is considered special, and multiple
- # occurrences thereof are not removed. Compare this
- # with having the same library being listed as a
- # dependency of multiple other libraries: in this case,
- # we know (pedantically, we assume) the library does not
- # need to be listed more than once, so we keep only the
- # last copy. This is not always right, but it is rare
- # enough that we require users that really mean to play
- # such unportable linking tricks to link the library
- # using -Wl,-lname, so that libtool does not consider it
- # for duplicate removal.
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
- # (they stay in deplibs)
- tmp_libs=
- for i in $dependency_libs ; do
- case " $predeps $postdeps $compiler_lib_search_path " in
- *" $i "*)
- i=""
- ;;
- esac
- if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
- fi
- done
- dependency_libs=$tmp_libs
- done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
-
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
- fi
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- objs="$objs$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
- exit $EXIT_FAILURE
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the non-libtool"
- $echo "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
- fi
- fi
-
- if test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
- fi
-
- set dummy $rpath
- if test "$#" -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
- fi
- else
-
- # Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # convert absolute version numbers to libtool ages
- # this retains compatibility with .la files and attempts
- # to make the code below a bit more comprehensible
-
- case $vinfo_number in
- yes)
- number_major="$2"
- number_minor="$3"
- number_revision="$4"
- #
- # There are really only two kinds -- those that
- # use the current revision as the major version
- # and those that subtract age and use age as
- # a minor version. But, then there is irix
- # which has an extra 1 added just for fun
- #
- case $version_type in
- darwin|linux|osf|windows)
- current=`expr $number_major + $number_minor`
- age="$number_minor"
- revision="$number_revision"
- ;;
- freebsd-aout|freebsd-elf|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
- ;;
- irix|nonstopux)
- current=`expr $number_major + $number_minor - 1`
- age="$number_minor"
- revision="$number_minor"
- ;;
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- ;;
- no)
- current="$2"
- revision="$3"
- age="$4"
- ;;
- esac
-
- # Check that each of the things are valid numbers.
- case $current in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $revision in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $age in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test "$age" -gt "$current"; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
- irix | nonstopux)
- major=`expr $current - $age + 1`
-
- case $version_type in
- nonstopux) verstring_prefix=nonstopux ;;
- *) verstring_prefix=sgi ;;
- esac
- verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- major=.`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- case $version_type in
- darwin)
- # we can't check for "0.0" in archive_cmds due to quoting
- # problems, so we reset it completely
- verstring=
- ;;
- *)
- verstring="0.0"
- ;;
- esac
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
- fi
-
- if test "$mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`$echo "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
- continue
- fi
- fi
- removelist="$removelist $p"
- ;;
- *) ;;
- esac
- done
- if test -n "$removelist"; then
- $show "${rm}r $removelist"
- $run ${rm}r $removelist
- fi
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
- deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
- done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $rm conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
- if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" -ne "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which I believe you do not have"
- $echo "*** because a test_compile did reveal that the linker did not use it for"
- $echo "*** its dynamic dependency list that programs get resolved with at runtime."
- fi
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
- # Error occurred in the first compile. Let's try to salvage
- # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- $rm conftest
- $LTCC $LTCFLAGS -o conftest conftest.c $i
- # Did it work?
- if test "$?" -eq 0 ; then
- ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed library $i."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because a test_compile did reveal that the linker did not use this one"
- $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
- fi
- fi
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
- $echo "*** library that it depends on before this library will be fully"
- $echo "*** functional. Installing it before continuing would be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for file magic test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a file magic. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval $echo \"$potent_lib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for library $a_deplib."
- $echo "*** I have the capability to make that library automatically link in when"
- $echo "*** you link to this library. But I can only do this if you have a"
- $echo "*** shared version of the library, which you do not appear to have"
- $echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
- else
- $echo "*** with $libname and none of the candidates passed a file format test"
- $echo "*** using a regex pattern. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
- # can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
- done
- fi
- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
- | grep . >/dev/null; then
- $echo
- if test "X$deplibs_check_method" = "Xnone"; then
- $echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- $echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- $echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- fi
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- $echo
- $echo "*** Warning: libtool could not satisfy all declared inter-library"
- $echo "*** dependencies of module $libname. Therefore, libtool will create"
- $echo "*** a static module, that should work as long as the dlopening"
- $echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $echo "*** not find such a program. So, this module is probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- $echo "*** The inter-library dependencies that have been dropped here will be"
- $echo "*** automatically added whenever a program is linked with this library"
- $echo "*** or is declared to -dlopen it."
-
- if test "$allow_undefined" = no; then
- $echo
- $echo "*** Since this library must not contain undefined symbols,"
- $echo "*** because either the platform does not support them or"
- $echo "*** it was explicitly requested with -no-undefined,"
- $echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- deplibs="$new_libs"
-
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- if test "$hardcode_into_libs" = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- if test -n "$hardcode_libdir_flag_spec_ld"; then
- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
- else
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test -z "$dlname"; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- linknames=
- for link
- do
- linknames="$linknames $link"
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- if len=`expr "X$cmd" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- $show "$cmd"
- $run eval "$cmd" || exit $?
- skipped_export=false
- else
- # The command line is too long to execute in one step.
- $show "using reloadable object file for export list..."
- skipped_export=:
- # Break out early, otherwise skipped_export may be
- # set to false by a later but shorter cmd.
- break
- fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
- tmp_deplibs=
- for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- tmp_deplibs="$tmp_deplibs $test_deplib"
- ;;
- esac
- done
- deplibs="$tmp_deplibs"
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
- eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-
- if test "X$skipped_export" != "X:" &&
- len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
- else
- # The command line is too long to link in one step, link piecewise.
- $echo "creating reloadable object files..."
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
- output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- delfiles=
- last_robj=
- k=1
- output=$output_objdir/$output_la-${k}.$objext
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
- if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; }; then
- objlist="$objlist $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- k=`expr $k + 1`
- output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
- len=1
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
- if ${skipped_export-false}; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
- fi
-
- # Set up a command to remove the reloadable object files
- # after they are used.
- i=0
- while test "$i" -lt "$k"
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
- done
-
- $echo "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- cmds=$module_expsym_cmds
- else
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
- fi
- fi
-
- # Append the command to remove the reloadable object files
- # to the just-reset $cmds.
- eval cmds=\"\$cmds~\$rm $delfiles\"
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-
- if test -n "$convenience"; then
- if test -z "$whole_archive_flag_spec"; then
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- fi
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
- case $output in
- *.lo)
- if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit $EXIT_FAILURE
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $run eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- prog)
- case $host in
- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
- esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
-
- if test "$preload" = yes; then
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
- fi
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
- ;;
- esac
-
- case $host in
- *darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- if test "$tagname" = CXX ; then
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
- fi
- ;;
- esac
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $compile_deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $compile_deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- compile_deplibs="$new_libs"
-
-
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- fi
-
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
- fi
- fi
-
- if test -n "$dlsyms"; then
- case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- else
- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
- $run eval '$echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
- else
- $echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
- case $host in
- *cygwin* | *mingw* )
- $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs */
-struct {
-"
- ;;
- * )
- $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
- ;;
- esac
-
-
- $echo >> "$output_objdir/$dlsyms" "\
- const char *name;
- lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- case $host in
- *cygwin* | *mingw* )
- if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
- else
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- fi
- ;;
- * )
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- ;;
- esac
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- exit_status=$?
-
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
- exit $exit_status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- # Delete the old output file.
- $run $rm $output
- # Link the executable and exit
- $show "$link_command"
- $run eval "$link_command" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- $show "$link_command"
- $run eval "$link_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*)
- exeext=.exe
- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
- *) exeext= ;;
- esac
- case $host in
- *cygwin* | *mingw* )
- output_name=`basename $output`
- output_path=`dirname $output`
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
- cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "/bin/sh $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
-*/
-EOF
- cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS. */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- DEBUG("(main) argv[0] : %s\n",argv[0]);
- DEBUG("(main) program_name : %s\n",program_name);
- newargz = XMALLOC(char *, argc+2);
-EOF
-
- cat >> $cwrappersource <<EOF
- newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
- cat >> $cwrappersource <<"EOF"
- newargz[1] = find_executable(argv[0]);
- if (newargz[1] == NULL)
- lt_fatal("Couldn't find %s", argv[0]);
- DEBUG("(main) found exe at : %s\n",newargz[1]);
- /* we know the script has the same name, without the .exe */
- /* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
- for (i = 1; i < argc; i++)
- newargz[i+1] = xstrdup(argv[i]);
- newargz[argc+1] = NULL;
-
- for (i=0; i<argc+1; i++)
- {
- DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
- ;
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",(char const **)newargz);
-EOF
- ;;
- *)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",newargz);
-EOF
- ;;
- esac
-
- cat >> $cwrappersource <<"EOF"
- return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
- void * p = (void *) malloc (num);
- if (!p)
- lt_fatal ("Memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char)name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable(const char * path)
-{
- struct stat st;
-
- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0) &&
- (
- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
- ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
- ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
- ((st.st_mode & S_IXUSR) == S_IXUSR))
- )
- return 1;
- else
- return 0;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
- int has_slash = 0;
- const char* p;
- const char* p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char* concat_name;
-
- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char* path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char* q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR(*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert(str != NULL);
- assert(pat != NULL);
-
- len = strlen(str);
- patlen = strlen(pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp(str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
- const char * message, va_list ap)
-{
- fprintf (stderr, "%s: %s: ", program_name, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
- va_end (ap);
-}
-EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $echo >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- $echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
- exit $EXIT_FAILURE
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- $echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $echo >> $output "\
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $echo >> $output "\
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
- exit $EXIT_FAILURE
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- $echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit $EXIT_FAILURE
- fi
-fi\
-"
- chmod +x $output
- fi
- exit $EXIT_SUCCESS
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$old_deplibs $non_pic_objects"
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=$old_archive_from_new_cmds
- else
- # POSIX demands no paths to be encoded in archives. We have
- # to avoid creating archives with duplicate basenames if we
- # might have to extract them afterwards, e.g., when creating a
- # static archive out of a convenience library, or when linking
- # the entirety of a libtool archive into another (currently
- # not supported by libtool).
- if (for obj in $oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "copying selected object files to avoid basename conflicts..."
-
- if test -z "$gentop"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
- exit $exit_status
- fi
- fi
-
- save_oldobjs=$oldobjs
- oldobjs=
- counter=1
- for obj in $save_oldobjs
- do
- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- case " $oldobjs " in
- " ") oldobjs=$obj ;;
- *[\ /]"$objbase "*)
- while :; do
- # Make sure we don't pick an alternate name that also
- # overlaps.
- newobj=lt$counter-$objbase
- counter=`expr $counter + 1`
- case " $oldobjs " in
- *[\ /]"$newobj "*) ;;
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;
- esac
- done
- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- $run ln "$obj" "$gentop/$newobj" ||
- $run cp "$obj" "$gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
- ;;
- *) oldobjs="$oldobjs $obj" ;;
- esac
- done
- fi
-
- eval cmds=\"$old_archive_cmds\"
-
- if len=`expr "X$cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- $echo "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
-
- # Is there a better way of finding the last object in the list?
- for obj in $save_oldobjs
- do
- last_oldobj=$obj
- done
- for obj in $save_oldobjs
- do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
- eval cmds=\"\$concat_cmds\"
- else
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- eval cmd=\"$cmd\"
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
-
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdependency_libs="$newdependency_libs $libdir/$name"
- ;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
- for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlfiles="$newdlfiles $libdir/$name"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlprefiles="$newdlprefiles $libdir/$name"
- done
- dlprefiles="$newdlprefiles"
- else
- newdlfiles=
- for lib in $dlfiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlfiles="$newdlfiles $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlprefiles="$newdlprefiles $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
- $rm $output
- # place dlname in correct position for cygwin
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
- esac
- $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
- $echo >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
- ;;
- esac
- exit $EXIT_SUCCESS
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg=$nonopt
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest=$arg
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f)
- case " $install_prog " in
- *[\\\ /]cp\ *) ;;
- *) prev=$arg ;;
- esac
- ;;
- -g | -m | -o) prev=$arg ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*)
- ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest=$arg
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test "$#" -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- library_names=
- old_library=
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- if test "$inst_prefix_dir" = "$destdir"; then
- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
- else
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
- fi
-
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$srcname $destdir/$realname"
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run eval "$striplib $destdir/$realname" || exit $?
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
- # the symlink we replace! Solaris /bin/ln does not understand -f,
- # so we also need to try rm && ln -s.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- cmds=$postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- file=`$echo $file|${SED} 's,.exe$,,'`
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin*|*mingw*)
- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
- notinst_deplibs=
- relink_command=
-
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$notinst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- relink_command=
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir=`func_mktempdir`
- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyway
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
- ;;
- esac
- ;;
- esac
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- $show "$old_striplib $oldlib"
- $run eval "$old_striplib $oldlib" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- cmds=$old_postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- cmds=$finish_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- test "$show" = : && exit $EXIT_SUCCESS
-
- $echo "X----------------------------------------------------------------------" | $Xsed
- $echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $echo " $libdir"
- done
- $echo
- $echo "If you ever happen to want to link against installed libraries"
- $echo "in a given directory, LIBDIR, you must either use libtool, and"
- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $echo " during execution"
- fi
- if test -n "$runpath_var"; then
- $echo " - add LIBDIR to the \`$runpath_var' environment variable"
- $echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- $echo
- $echo "See any operating system documentation about shared libraries for"
- $echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "X----------------------------------------------------------------------" | $Xsed
- exit $EXIT_SUCCESS
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit $EXIT_FAILURE
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- dir=
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool clean and uninstall mode
- clean | uninstall)
- modename="$modename: $mode"
- rm="$nonopt"
- files=
- rmforce=
- exit_status=0
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -f) rm="$rm $arg"; rmforce=yes ;;
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- rmdirs=
-
- origobjdir="$objdir"
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$file"; then
- dir=.
- objdir="$origobjdir"
- else
- objdir="$dir/$origobjdir"
- fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test "$mode" = uninstall && objdir="$dir"
-
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
- case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
- esac
- fi
-
- # Don't error if the file doesn't exist and rm -f was used.
- if (test -L "$file") >/dev/null 2>&1 \
- || (test -h "$file") >/dev/null 2>&1 \
- || test -f "$file"; then
- :
- elif test -d "$file"; then
- exit_status=1
- continue
- elif test "$rmforce" = yes; then
- continue
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
- done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
- case "$mode" in
- clean)
- case " $library_names " in
- # " " in the beginning catches empty $dlname
- *" $dlname "*) ;;
- *) rmfiles="$rmfiles $objdir/$dlname" ;;
- esac
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- ;;
- uninstall)
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- cmds=$postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- cmds=$old_postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
- # FIXME: should reinstall the best remaining shared library.
- ;;
- esac
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
- # Read the .lo file
- . $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" \
- && test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" \
- && test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- if test "$mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
- file=`$echo $file|${SED} 's,.exe$,,'`
- noexename=`$echo $name|${SED} 's,.exe$,,'`
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
- rmfiles="$rmfiles $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- relink_command=
- . $dir/$noexename
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
- fi
- fi
- fi
- ;;
- esac
- $show "$rm $rmfiles"
- $run $rm $rmfiles || exit_status=1
- done
- objdir="$origobjdir"
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- $show "rmdir $dir"
- $run rmdir $dir >/dev/null 2>&1
- fi
- done
-
- exit $exit_status
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test -z "$exec_cmd"; then
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
- eval exec $exec_cmd
- exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --tag=TAG use configuration variables from tag TAG
- --version print version information
-
-MODE must be one of the following:
-
- clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
- exit $EXIT_SUCCESS
- ;;
-
-clean)
- $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
+++ /dev/null
-lttctl.o lttctl.o: lttctl.c ../config.h ../liblttctl/lttctl.h \
- /usr/include/linux/limits.h /usr/include/asm/types.h \
- /usr/include/asm-i386/types.h /usr/include/sys/socket.h \
- /usr/include/features.h /usr/include/sys/cdefs.h \
- /usr/include/gnu/stubs.h /usr/include/sys/uio.h \
- /usr/include/sys/types.h /usr/include/bits/types.h \
- /usr/include/bits/wordsize.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/stddef.h \
- /usr/include/bits/typesizes.h /usr/include/time.h /usr/include/endian.h \
- /usr/include/bits/endian.h /usr/include/sys/select.h \
- /usr/include/bits/select.h /usr/include/bits/sigset.h \
- /usr/include/bits/time.h /usr/include/sys/sysmacros.h \
- /usr/include/bits/pthreadtypes.h /usr/include/bits/sched.h \
- /usr/include/bits/uio.h /usr/include/bits/socket.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/limits.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/syslimits.h \
- /usr/include/limits.h /usr/include/bits/posix1_lim.h \
- /usr/include/bits/local_lim.h /usr/include/bits/posix2_lim.h \
- /usr/include/bits/sockaddr.h /usr/include/asm/socket.h \
- /usr/include/asm-i386/socket.h /usr/include/asm/sockios.h \
- /usr/include/asm-i386/sockios.h /usr/include/linux/netlink.h \
- /usr/include/linux/types.h /usr/include/linux/posix_types.h \
- /usr/include/linux/stddef.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/asm/posix_types.h \
- /usr/include/asm/posix_types.h /usr/include/asm-i386/posix_types.h \
- /usr/include/errno.h /usr/include/bits/errno.h \
- /usr/include/linux/errno.h /usr/include/asm/errno.h \
- /usr/include/asm-i386/errno.h /usr/include/stdio.h /usr/include/libio.h \
- /usr/include/_G_config.h /usr/include/wchar.h /usr/include/bits/wchar.h \
- /usr/include/gconv.h /usr/lib/gcc/i486-linux-gnu/4.0.3/include/stdarg.h \
- /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
- /usr/include/bits/stdio.h /usr/include/stdlib.h /usr/include/alloca.h \
- /usr/include/sys/wait.h /usr/include/signal.h \
- /usr/include/bits/signum.h /usr/include/bits/siginfo.h \
- /usr/include/bits/sigaction.h /usr/include/bits/sigcontext.h \
- /usr/include/asm/sigcontext.h /usr/include/asm-i386/sigcontext.h \
- /usr/include/bits/sigstack.h /usr/include/bits/sigthread.h \
- /usr/include/sys/resource.h /usr/include/bits/resource.h \
- /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
- /usr/include/unistd.h /usr/include/bits/posix_opt.h \
- /usr/include/bits/confname.h /usr/include/getopt.h \
- /usr/include/dirent.h /usr/include/bits/dirent.h /usr/include/string.h \
- /usr/include/bits/string.h /usr/include/bits/string2.h \
- /usr/include/sys/stat.h /usr/include/bits/stat.h
-
-../config.h:
-
-../liblttctl/lttctl.h:
-
-/usr/include/linux/limits.h:
-
-/usr/include/asm/types.h:
-
-/usr/include/asm-i386/types.h:
-
-/usr/include/sys/socket.h:
-
-/usr/include/features.h:
-
-/usr/include/sys/cdefs.h:
-
-/usr/include/gnu/stubs.h:
-
-/usr/include/sys/uio.h:
-
-/usr/include/sys/types.h:
-
-/usr/include/bits/types.h:
-
-/usr/include/bits/wordsize.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/stddef.h:
-
-/usr/include/bits/typesizes.h:
-
-/usr/include/time.h:
-
-/usr/include/endian.h:
-
-/usr/include/bits/endian.h:
-
-/usr/include/sys/select.h:
-
-/usr/include/bits/select.h:
-
-/usr/include/bits/sigset.h:
-
-/usr/include/bits/time.h:
-
-/usr/include/sys/sysmacros.h:
-
-/usr/include/bits/pthreadtypes.h:
-
-/usr/include/bits/sched.h:
-
-/usr/include/bits/uio.h:
-
-/usr/include/bits/socket.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/limits.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/syslimits.h:
-
-/usr/include/limits.h:
-
-/usr/include/bits/posix1_lim.h:
-
-/usr/include/bits/local_lim.h:
-
-/usr/include/bits/posix2_lim.h:
-
-/usr/include/bits/sockaddr.h:
-
-/usr/include/asm/socket.h:
-
-/usr/include/asm-i386/socket.h:
-
-/usr/include/asm/sockios.h:
-
-/usr/include/asm-i386/sockios.h:
-
-/usr/include/linux/netlink.h:
-
-/usr/include/linux/types.h:
-
-/usr/include/linux/posix_types.h:
-
-/usr/include/linux/stddef.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/asm/posix_types.h:
-
-/usr/include/asm/posix_types.h:
-
-/usr/include/asm-i386/posix_types.h:
-
-/usr/include/errno.h:
-
-/usr/include/bits/errno.h:
-
-/usr/include/linux/errno.h:
-
-/usr/include/asm/errno.h:
-
-/usr/include/asm-i386/errno.h:
-
-/usr/include/stdio.h:
-
-/usr/include/libio.h:
-
-/usr/include/_G_config.h:
-
-/usr/include/wchar.h:
-
-/usr/include/bits/wchar.h:
-
-/usr/include/gconv.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/stdarg.h:
-
-/usr/include/bits/stdio_lim.h:
-
-/usr/include/bits/sys_errlist.h:
-
-/usr/include/bits/stdio.h:
-
-/usr/include/stdlib.h:
-
-/usr/include/alloca.h:
-
-/usr/include/sys/wait.h:
-
-/usr/include/signal.h:
-
-/usr/include/bits/signum.h:
-
-/usr/include/bits/siginfo.h:
-
-/usr/include/bits/sigaction.h:
-
-/usr/include/bits/sigcontext.h:
-
-/usr/include/asm/sigcontext.h:
-
-/usr/include/asm-i386/sigcontext.h:
-
-/usr/include/bits/sigstack.h:
-
-/usr/include/bits/sigthread.h:
-
-/usr/include/sys/resource.h:
-
-/usr/include/bits/resource.h:
-
-/usr/include/bits/waitflags.h:
-
-/usr/include/bits/waitstatus.h:
-
-/usr/include/unistd.h:
-
-/usr/include/bits/posix_opt.h:
-
-/usr/include/bits/confname.h:
-
-/usr/include/getopt.h:
-
-/usr/include/dirent.h:
-
-/usr/include/bits/dirent.h:
-
-/usr/include/string.h:
-
-/usr/include/bits/string.h:
-
-/usr/include/bits/string2.h:
-
-/usr/include/sys/stat.h:
-
-/usr/include/bits/stat.h:
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# lttctl/Makefile. Generated from Makefile.in by configure.
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-srcdir = .
-top_srcdir = ..
-
-pkgdatadir = $(datadir)/ltt-control
-pkglibdir = $(libdir)/ltt-control
-pkgincludedir = $(includedir)/ltt-control
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /usr/bin/install -c
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = i686-pc-linux-gnu
-ACLOCAL = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run aclocal-1.7
-AMDEP_FALSE = #
-AMDEP_TRUE =
-AMTAR = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoconf
-AUTOHEADER = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoheader
-AUTOMAKE = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run automake-1.7
-AWK = mawk
-BASH = /bin/sh
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2
-CPP = gcc -E
-CPPFLAGS =
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEFAULT_INCLUDES = -I$(top_srcdir) -I$(top_builddir)
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C =
-ECHO_N = -n
-ECHO_T =
-EGREP = /bin/grep -E
-EXEEXT =
-F77 =
-FFLAGS =
-GREP = /bin/grep
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-LDFLAGS =
-LIBOBJS =
-LIBS =
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS =
-MAKEINFO = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run makeinfo
-OBJEXT = o
-PACKAGE = ltt-control
-PACKAGE_BUGREPORT = BUG-REPORT-ADDRESS
-PACKAGE_CFLAGS = -Wall -Wformat
-PACKAGE_LIBS =
-PACKAGE_NAME = FULL-PACKAGE-NAME
-PACKAGE_STRING = FULL-PACKAGE-NAME VERSION
-PACKAGE_TARNAME = full-package-name
-PACKAGE_VERSION = VERSION
-PATH_SEPARATOR = :
-RANLIB = ranlib
-SET_MAKE =
-SHELL = /bin/sh
-STRIP = strip
-THREAD_LIBS = -lpthread
-UTIL_LIBS = -lutil
-VERSION = 0.24-17092006
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 =
-am__fastdepCC_FALSE = #
-am__fastdepCC_TRUE =
-am__fastdepCXX_FALSE = #
-am__fastdepCXX_TRUE =
-am__include = include
-am__leading_dot = .
-am__quote =
-bindir = ${exec_prefix}/bin
-build = i686-pc-linux-gnu
-build_alias =
-build_cpu = i686
-build_os = linux-gnu
-build_vendor = pc
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = i686-pc-linux-gnu
-host_alias =
-host_cpu = i686
-host_os = linux-gnu
-host_vendor = pc
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = /usr/src/ltt-control-0.24-17092006/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-lttctlincludedir = ${prefix}/include/liblttctl
-mandir = ${datarootdir}/man
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-sysconfdir = ${prefix}/etc
-target_alias =
-
-AM_CFLAGS = -DPACKAGE_DATA_DIR=\""$(datadir)"\" -DPACKAGE_BIN_DIR=\""$(bindir)"\"
-
-bin_PROGRAMS = lttctl
-
-lttctl_SOURCES = \
- lttctl.c
-
-lttctl_DEPENDENCIES = ../liblttctl/liblttctl.la
-lttctl_LDADD = $(lttctl_DEPENDENCIES)
-subdir = lttctl
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-bin_PROGRAMS = lttctl$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-
-am_lttctl_OBJECTS = lttctl.$(OBJEXT)
-lttctl_OBJECTS = $(am_lttctl_OBJECTS)
-lttctl_LDFLAGS =
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-DEP_FILES = ./$(DEPDIR)/lttctl.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
- $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(lttctl_SOURCES)
-DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
-SOURCES = $(lttctl_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu lttctl/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
- done
-
-clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-lttctl$(EXEEXT): $(lttctl_OBJECTS) $(lttctl_DEPENDENCIES)
- @rm -f lttctl$(EXEEXT)
- $(LINK) $(lttctl_LDFLAGS) $(lttctl_OBJECTS) $(lttctl_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-include ./$(DEPDIR)/lttctl.Po
-
-.c.o:
- if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=no \
-# depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
- if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=no \
-# depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
-
-.c.lo:
- if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=yes \
-# depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(bindir)
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic clean-libtool ctags distclean distclean-compile \
- distclean-generic distclean-libtool distclean-tags distdir dvi \
- dvi-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-## Process this file with automake to produce Makefile.in
-
-AM_CFLAGS = -DPACKAGE_DATA_DIR=\""$(datadir)"\" -DPACKAGE_BIN_DIR=\""$(bindir)"\"
-
-bin_PROGRAMS = lttctl
-
-lttctl_SOURCES = \
- lttctl.c
-lttctl_DEPENDENCIES = ../liblttctl/liblttctl.la
-lttctl_LDADD = $(lttctl_DEPENDENCIES)
-
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_CFLAGS = @PACKAGE_CFLAGS@
-PACKAGE_LIBS = @PACKAGE_LIBS@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-THREAD_LIBS = @THREAD_LIBS@
-UTIL_LIBS = @UTIL_LIBS@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lttctlincludedir = @lttctlincludedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-AM_CFLAGS = -DPACKAGE_DATA_DIR=\""$(datadir)"\" -DPACKAGE_BIN_DIR=\""$(bindir)"\"
-
-bin_PROGRAMS = lttctl
-
-lttctl_SOURCES = \
- lttctl.c
-
-lttctl_DEPENDENCIES = ../liblttctl/liblttctl.la
-lttctl_LDADD = $(lttctl_DEPENDENCIES)
-subdir = lttctl
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-bin_PROGRAMS = lttctl$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-
-am_lttctl_OBJECTS = lttctl.$(OBJEXT)
-lttctl_OBJECTS = $(am_lttctl_OBJECTS)
-lttctl_LDFLAGS =
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/lttctl.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
- $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(lttctl_SOURCES)
-DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
-SOURCES = $(lttctl_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu lttctl/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
- done
-
-clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-lttctl$(EXEEXT): $(lttctl_OBJECTS) $(lttctl_DEPENDENCIES)
- @rm -f lttctl$(EXEEXT)
- $(LINK) $(lttctl_LDFLAGS) $(lttctl_OBJECTS) $(lttctl_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lttctl.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
-
-.c.lo:
-@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(bindir)
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic clean-libtool ctags distclean distclean-compile \
- distclean-generic distclean-libtool distclean-tags distdir dvi \
- dvi-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-/* lttctl
- *
- * Linux Trace Toolkit Control
- *
- * Small program that controls LTT through libltt.
- *
- * Copyright 2005 -
- * Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
- */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <liblttctl/lttctl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <unistd.h>
-#include <signal.h>
-#include <dirent.h>
-#include <string.h>
-#include <sys/stat.h>
-
-/* Buffer for file copy : 4k seems optimal. */
-#define BUF_SIZE 4096
-
-enum trace_ctl_op {
- CTL_OP_CREATE_START,
- CTL_OP_CREATE,
- CTL_OP_DESTROY,
- CTL_OP_STOP_DESTROY,
- CTL_OP_START,
- CTL_OP_STOP,
- CTL_OP_DAEMON,
- CTL_OP_DAEMON_HYBRID_FINISH,
- CTL_OP_DESCRIPTION,
- CTL_OP_NONE
-};
-
-static char *trace_name = NULL;
-static char *trace_type = "relay";
-static char *mode_name = NULL;
-static unsigned subbuf_size_low = 0;
-static unsigned n_subbufs_low = 0;
-static unsigned subbuf_size_med = 0;
-static unsigned n_subbufs_med = 0;
-static unsigned subbuf_size_high = 0;
-static unsigned n_subbufs_high = 0;
-static unsigned append_trace = 0;
-static enum trace_mode mode = LTT_TRACE_NORMAL;
-static enum trace_ctl_op op = CTL_OP_NONE;
-static char *channel_root = NULL;
-static char *trace_root = NULL;
-static char *num_threads = "1";
-
-/* Args :
- *
- */
-void show_arguments(void)
-{
- printf("Please use the following arguments :\n");
- printf("\n");
- printf("-n name Name of the trace.\n");
- printf("-b Create trace channels and start tracing (no daemon).\n");
- printf("-c Create trace channels.\n");
- printf("-m mode Normal, flight recorder or hybrid mode.\n");
- printf(" Mode values : normal (default), flight or hybrid.\n");
- printf("-r Destroy trace channels.\n");
- printf("-R Stop tracing and destroy trace channels.\n");
- printf("-s Start tracing.\n");
- //printf(" Note : will automatically create a normal trace if "
- // "none exists.\n");
- printf("-q Stop tracing.\n");
- printf("-d Create trace, spawn a lttd daemon, start tracing.\n");
- printf(" (optionally, you can set LTT_DAEMON\n");
- printf(" and the LTT_FACILITIES env. vars.)\n");
- printf("-f Stop tracing, dump flight recorder trace, destroy channels\n");
- printf(" (for hybrid traces)\n");
- printf("-t Trace root path. (ex. /root/traces/example_trace)\n");
- printf("-T Type of trace (ex. relay)\n");
- printf("-l LTT channels root path. (ex. /mnt/debugfs/ltt)\n");
- printf("-Z Size of the low data rate subbuffers (will be rounded to next page size)\n");
- printf("-X Number of low data rate subbuffers\n");
- printf("-V Size of the medium data rate subbuffers (will be rounded to next page size)\n");
- printf("-B Number of medium data rate subbuffers\n");
- printf("-z Size of the high data rate subbuffers (will be rounded to next page size)\n");
- printf("-x Number of high data rate subbuffers\n");
- printf("-e Get XML facilities description\n");
- printf("-a Append to trace\n");
- printf("-N Number of lttd threads\n");
- printf("\n");
-}
-
-
-/* parse_arguments
- *
- * Parses the command line arguments.
- *
- * Returns -1 if the arguments were correct, but doesn't ask for program
- * continuation. Returns EINVAL if the arguments are incorrect, or 0 if OK.
- */
-int parse_arguments(int argc, char **argv)
-{
- int ret = 0;
- int argn = 1;
-
- if(argc == 2) {
- if(strcmp(argv[1], "-h") == 0) {
- return -1;
- }
- }
-
- while(argn < argc) {
-
- switch(argv[argn][0]) {
- case '-':
- switch(argv[argn][1]) {
- case 'n':
- if(argn+1 < argc) {
- trace_name = argv[argn+1];
- argn++;
- } else {
- printf("Specify a trace name after -n.\n");
- printf("\n");
- ret = EINVAL;
- }
-
- break;
- case 'b':
- op = CTL_OP_CREATE_START;
- break;
- case 'c':
- op = CTL_OP_CREATE;
- break;
- case 'm':
- if(argn+1 < argc) {
- mode_name = argv[argn+1];
- argn++;
- if(strcmp(mode_name, "normal") == 0)
- mode = LTT_TRACE_NORMAL;
- else if(strcmp(mode_name, "flight") == 0)
- mode = LTT_TRACE_FLIGHT;
- else if(strcmp(mode_name, "hybrid") == 0)
- mode = LTT_TRACE_HYBRID;
- else {
- printf("Invalid mode '%s'.\n", argv[argn]);
- printf("\n");
- ret = EINVAL;
- }
- } else {
- printf("Specify a mode after -m.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'r':
- op = CTL_OP_DESTROY;
- break;
- case 'R':
- op = CTL_OP_STOP_DESTROY;
- break;
- case 's':
- op = CTL_OP_START;
- break;
- case 'q':
- op = CTL_OP_STOP;
- break;
- case 'Z':
- if(argn+1 < argc) {
- subbuf_size_low = (unsigned)atoi(argv[argn+1]);
- argn++;
- } else {
- printf("Specify a number of low traffic subbuffers after -Z.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'X':
- if(argn+1 < argc) {
- n_subbufs_low = (unsigned)atoi(argv[argn+1]);
- argn++;
- } else {
- printf("Specify a low traffic subbuffer size after -X.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'V':
- if(argn+1 < argc) {
- subbuf_size_med = (unsigned)atoi(argv[argn+1]);
- argn++;
- } else {
- printf("Specify a number of medium traffic subbuffers after -V.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'B':
- if(argn+1 < argc) {
- n_subbufs_med = (unsigned)atoi(argv[argn+1]);
- argn++;
- } else {
- printf("Specify a medium traffic subbuffer size after -B.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'z':
- if(argn+1 < argc) {
- subbuf_size_high = (unsigned)atoi(argv[argn+1]);
- argn++;
- } else {
- printf("Specify a number of high traffic subbuffers after -z.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'x':
- if(argn+1 < argc) {
- n_subbufs_high = (unsigned)atoi(argv[argn+1]);
- argn++;
- } else {
- printf("Specify a high traffic subbuffer size after -x.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'd':
- op = CTL_OP_DAEMON;
- break;
- case 'f':
- op = CTL_OP_DAEMON_HYBRID_FINISH;
- break;
- case 'e':
- op = CTL_OP_DESCRIPTION;
- break;
- case 't':
- if(argn+1 < argc) {
- trace_root = argv[argn+1];
- argn++;
- } else {
- printf("Specify a trace root path after -t.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'l':
- if(argn+1 < argc) {
- channel_root = argv[argn+1];
- argn++;
- } else {
- printf("Specify a channel root path after -l.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- case 'a':
- append_trace = 1;
- break;
- case 'N':
- if(argn+1 < argc) {
- num_threads = argv[argn+1];
- argn++;
- }
- break;
- case 'T':
- if(argn+1 < argc) {
- trace_type = argv[argn+1];
- argn++;
- } else {
- printf("Specify a trace type after -T.\n");
- printf("\n");
- ret = EINVAL;
- }
- break;
- default:
- printf("Invalid argument '%s'.\n", argv[argn]);
- printf("\n");
- ret = EINVAL;
- }
- break;
- default:
- printf("Invalid argument '%s'.\n", argv[argn]);
- printf("\n");
- ret = EINVAL;
- }
- argn++;
- }
-
- if(op != CTL_OP_DESCRIPTION && trace_name == NULL) {
- printf("Please specify a trace name.\n");
- printf("\n");
- ret = EINVAL;
- }
-
- if(op == CTL_OP_NONE) {
- printf("Please specify an operation.\n");
- printf("\n");
- ret = EINVAL;
- }
-
- if(op == CTL_OP_DAEMON || op == CTL_OP_DAEMON_HYBRID_FINISH) {
- if(trace_root == NULL) {
- printf("Please specify -t trace_root_path with the -d option.\n");
- printf("\n");
- ret = EINVAL;
- }
- if(channel_root == NULL) {
- printf("Please specify -l ltt_root_path with the -d option.\n");
- printf("\n");
- ret = EINVAL;
- }
- }
-
- if(op == CTL_OP_DESCRIPTION) {
- if(trace_root == NULL) {
- printf("Please specify -t trace_root_path with the -e option.\n");
- printf("\n");
- ret = EINVAL;
- }
- }
-
- return ret;
-}
-
-void show_info(void)
-{
- printf("Linux Trace Toolkit Trace Control\n");
- printf("\n");
- if(trace_name != NULL) {
- printf("Controlling trace : %s\n", trace_name);
- printf("\n");
- }
-}
-
-int create_eventdefs(void)
-{
- int ret = 0;
- char eventdefs_path[PATH_MAX];
- char eventdefs_file[PATH_MAX];
- char facilities_file[PATH_MAX];
- char read_buf[BUF_SIZE];
- struct dirent *entry;
- char *facilities_path = getenv("LTT_FACILITIES");
- if(facilities_path == NULL) facilities_path =
- PACKAGE_DATA_DIR "/" PACKAGE "/facilities";
-
- ret = mkdir(trace_root, S_IRWXU|S_IRWXG|S_IRWXO);
- if(ret == -1 && errno != EEXIST) {
- ret = errno;
- perror("Cannot create trace_root directory");
- printf("trace_root is %s\n", trace_root);
- goto error;
- }
- ret = 0;
-
- size_t trace_root_len = strlen(trace_root);
- strncpy(eventdefs_path, trace_root, PATH_MAX);
- strncat(eventdefs_path, "/eventdefs/", PATH_MAX - trace_root_len);
- size_t eventdefs_path_len = strlen(eventdefs_path);
- ret = mkdir(eventdefs_path, S_IRWXU|S_IRWXG|S_IRWXO);
- if(ret == -1 && (!append_trace || errno != EEXIST)) {
- ret = errno;
- perror("Cannot create eventdefs directory");
- goto error;
- }
- ret = 0;
-
- DIR *facilities_dir = opendir(facilities_path);
-
- if(facilities_dir == NULL) {
- perror("Cannot open facilities directory");
- ret = EEXIST;
- goto error;
- }
-
- while((entry = readdir(facilities_dir)) != NULL) {
- if(entry->d_name[0] == '.') continue;
-
- printf("Appending facility file %s\n", entry->d_name);
- strncpy(eventdefs_file, eventdefs_path, PATH_MAX);
- strncat(eventdefs_file, entry->d_name, PATH_MAX - eventdefs_path_len);
- /* Append to the file */
- FILE *dest = fopen(eventdefs_file, "a");
- if(!dest) {
- perror("Cannot create eventdefs file");
- continue;
- }
- strncpy(facilities_file, facilities_path, PATH_MAX);
- size_t facilities_dir_len = strlen(facilities_path);
- strncat(facilities_file, "/", PATH_MAX - facilities_dir_len);
- strncat(facilities_file, entry->d_name, PATH_MAX - facilities_dir_len-1);
- FILE *src = fopen(facilities_file, "r");
- if(!src) {
- ret = errno;
- perror("Cannot open eventdefs file for reading");
- goto close_dest;
- }
-
- do {
- size_t read_size, write_size;
- read_size = fread(read_buf, sizeof(char), BUF_SIZE, src);
- if(ferror(src)) {
- ret = errno;
- perror("Cannot read eventdefs file");
- goto close_src;
- }
- write_size = fwrite(read_buf, sizeof(char), read_size, dest);
- if(ferror(dest)) {
- ret = errno;
- perror("Cannot write eventdefs file");
- goto close_src;
- }
- } while(!feof(src));
-
- /* Add spacing between facilities */
- fwrite("\n", 1, 1, dest);
-
-close_src:
- fclose(src);
-close_dest:
- fclose(dest);
- }
-
- closedir(facilities_dir);
-
-error:
- return ret;
-
-}
-
-
-int lttctl_daemon(struct lttctl_handle *handle, char *trace_name)
-{
- char channel_path[PATH_MAX] = "";
- pid_t pid;
- int ret;
- char *lttd_path = getenv("LTT_DAEMON");
-
- if(lttd_path == NULL) lttd_path =
- PACKAGE_BIN_DIR "/lttd";
-
- strcat(channel_path, channel_root);
- strcat(channel_path, "/");
- strcat(channel_path, trace_name);
-
-
- ret = lttctl_create_trace(handle, trace_name, mode, trace_type,
- subbuf_size_low, n_subbufs_low,
- subbuf_size_med, n_subbufs_med,
- subbuf_size_high, n_subbufs_high);
- if(ret != 0) goto create_error;
-
- pid = fork();
-
- if(pid > 0) {
- int status = 0;
- /* parent */
-
- ret = waitpid(pid, &status, 0);
- if(ret == -1) {
- ret = errno;
- perror("Error in waitpid");
- goto start_error;
- }
-
- ret = 0;
- if(WIFEXITED(status))
- ret = WEXITSTATUS(status);
- if(ret) goto start_error;
-
- printf("Creating supplementary trace files\n");
- ret = create_eventdefs();
- if(ret) goto start_error;
-
- } else if(pid == 0) {
- /* child */
- int ret;
- if(mode != LTT_TRACE_HYBRID) {
- if(append_trace)
- ret = execlp(lttd_path, lttd_path, "-t", trace_root, "-c",
- channel_path, "-d", "-a", "-N", num_threads, NULL);
- else
- ret = execlp(lttd_path, lttd_path, "-t", trace_root, "-c",
- channel_path, "-d", "-N", num_threads, NULL);
- } else {
- if(append_trace)
- ret = execlp(lttd_path, lttd_path, "-t", trace_root, "-c",
- channel_path, "-d", "-a", "-N", num_threads, "-n", NULL);
- else
- ret = execlp(lttd_path, lttd_path, "-t", trace_root, "-c",
- channel_path, "-d", "-N", num_threads, "-n", NULL);
- }
- if(ret) {
- ret = errno;
- perror("Error in executing the lttd daemon");
- exit(ret);
- }
- } else {
- /* error */
- perror("Error in forking for lttd daemon");
- }
-
- ret = lttctl_start(handle, trace_name);
- if(ret != 0) goto start_error;
-
- return 0;
-
- /* error handling */
-start_error:
- printf("Trace start error\n");
- ret |= lttctl_destroy_trace(handle, trace_name);
-create_error:
- return ret;
-}
-
-
-
-
-int lttctl_daemon_hybrid_finish(struct lttctl_handle *handle, char *trace_name)
-{
- char channel_path[PATH_MAX] = "";
- pid_t pid;
- int ret;
- char *lttd_path = getenv("LTT_DAEMON");
-
- if(lttd_path == NULL) lttd_path =
- PACKAGE_BIN_DIR "/lttd";
-
- strcat(channel_path, channel_root);
- strcat(channel_path, "/");
- strcat(channel_path, trace_name);
-
-
- ret = lttctl_stop(handle, trace_name);
- if(ret != 0) goto stop_error;
-
- pid = fork();
-
- if(pid > 0) {
- int status = 0;
- /* parent */
-
- ret = waitpid(pid, &status, 0);
- if(ret == -1) {
- ret = errno;
- perror("Error in waitpid");
- goto destroy_error;
- }
-
- ret = 0;
- if(WIFEXITED(status))
- ret = WEXITSTATUS(status);
- if(ret) goto destroy_error;
-
- } else if(pid == 0) {
- /* child */
- int ret;
- if(append_trace)
- ret = execlp(lttd_path, lttd_path, "-t", trace_root, "-c",
- channel_path, "-d", "-a", "-N", num_threads, "-f", NULL);
- else
- ret = execlp(lttd_path, lttd_path, "-t", trace_root, "-c",
- channel_path, "-d", "-N", num_threads, "-f", NULL);
- if(ret) {
- ret = errno;
- perror("Error in executing the lttd daemon");
- exit(ret);
- }
- } else {
- /* error */
- perror("Error in forking for lttd daemon");
- }
-
- ret = lttctl_destroy_trace(handle, trace_name);
- if(ret != 0) goto destroy_error;
-
- return 0;
-
- /* error handling */
-destroy_error:
- printf("Hybrid trace destroy error\n");
-stop_error:
- return ret;
-}
-
-
-
-int main(int argc, char ** argv)
-{
- int ret;
- struct lttctl_handle *handle;
-
- ret = parse_arguments(argc, argv);
-
- if(ret != 0) show_arguments();
- if(ret == EINVAL) return EINVAL;
- if(ret == -1) return 0;
-
- show_info();
-
- handle = lttctl_create_handle();
-
- if(handle == NULL) return -1;
-
- switch(op) {
- case CTL_OP_CREATE_START:
- ret = lttctl_create_trace(handle, trace_name, mode, trace_type,
- subbuf_size_low, n_subbufs_low,
- subbuf_size_med, n_subbufs_med,
- subbuf_size_high, n_subbufs_high);
- if(!ret)
- ret = lttctl_start(handle, trace_name);
- break;
- case CTL_OP_CREATE:
- ret = lttctl_create_trace(handle, trace_name, mode, trace_type,
- subbuf_size_low, n_subbufs_low,
- subbuf_size_med, n_subbufs_med,
- subbuf_size_high, n_subbufs_high);
- break;
- case CTL_OP_DESTROY:
- ret = lttctl_destroy_trace(handle, trace_name);
- break;
- case CTL_OP_STOP_DESTROY:
- ret = lttctl_stop(handle, trace_name);
- if(!ret)
- ret = lttctl_destroy_trace(handle, trace_name);
- break;
- case CTL_OP_START:
- ret = lttctl_start(handle, trace_name);
- break;
- case CTL_OP_STOP:
- ret = lttctl_stop(handle, trace_name);
- break;
- case CTL_OP_DAEMON:
- ret = lttctl_daemon(handle, trace_name);
- break;
- case CTL_OP_DAEMON_HYBRID_FINISH:
- ret = lttctl_daemon_hybrid_finish(handle, trace_name);
- break;
- case CTL_OP_DESCRIPTION:
- ret = create_eventdefs();
- break;
- case CTL_OP_NONE:
- break;
- }
-
- ret |= lttctl_destroy_handle(handle);
-
- return ret;
-}
+++ /dev/null
-lttd.o lttd.o: lttd.c ../config.h /usr/include/features.h \
- /usr/include/sys/cdefs.h /usr/include/gnu/stubs.h /usr/include/stdio.h \
- /usr/lib/gcc/i486-linux-gnu/4.0.3/include/stddef.h \
- /usr/include/bits/types.h /usr/include/bits/wordsize.h \
- /usr/include/bits/typesizes.h /usr/include/libio.h \
- /usr/include/_G_config.h /usr/include/wchar.h /usr/include/bits/wchar.h \
- /usr/include/gconv.h /usr/lib/gcc/i486-linux-gnu/4.0.3/include/stdarg.h \
- /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
- /usr/include/bits/stdio.h /usr/include/unistd.h \
- /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
- /usr/include/bits/confname.h /usr/include/getopt.h /usr/include/errno.h \
- /usr/include/bits/errno.h /usr/include/linux/errno.h \
- /usr/include/asm/errno.h /usr/include/asm-i386/errno.h \
- /usr/include/sys/types.h /usr/include/time.h /usr/include/endian.h \
- /usr/include/bits/endian.h /usr/include/sys/select.h \
- /usr/include/bits/select.h /usr/include/bits/sigset.h \
- /usr/include/bits/time.h /usr/include/sys/sysmacros.h \
- /usr/include/bits/pthreadtypes.h /usr/include/bits/sched.h \
- /usr/include/sys/stat.h /usr/include/bits/stat.h /usr/include/stdlib.h \
- /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
- /usr/include/xlocale.h /usr/include/alloca.h /usr/include/dirent.h \
- /usr/include/bits/dirent.h /usr/include/bits/posix1_lim.h \
- /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
- /usr/include/string.h /usr/include/bits/string.h \
- /usr/include/bits/string2.h /usr/include/fcntl.h \
- /usr/include/bits/fcntl.h /usr/include/sys/poll.h \
- /usr/include/bits/poll.h /usr/include/sys/mman.h \
- /usr/include/bits/mman.h /usr/include/signal.h \
- /usr/include/bits/signum.h /usr/include/bits/siginfo.h \
- /usr/include/bits/sigaction.h /usr/include/bits/sigcontext.h \
- /usr/include/asm/sigcontext.h /usr/include/asm-i386/sigcontext.h \
- /usr/include/bits/sigstack.h /usr/include/sys/ucontext.h \
- /usr/include/bits/sigthread.h /usr/include/pthread.h \
- /usr/include/sched.h /usr/include/bits/initspin.h \
- /usr/include/asm/ioctl.h /usr/include/asm-i386/ioctl.h \
- /usr/include/asm/types.h /usr/include/asm-i386/types.h
-
-../config.h:
-
-/usr/include/features.h:
-
-/usr/include/sys/cdefs.h:
-
-/usr/include/gnu/stubs.h:
-
-/usr/include/stdio.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/stddef.h:
-
-/usr/include/bits/types.h:
-
-/usr/include/bits/wordsize.h:
-
-/usr/include/bits/typesizes.h:
-
-/usr/include/libio.h:
-
-/usr/include/_G_config.h:
-
-/usr/include/wchar.h:
-
-/usr/include/bits/wchar.h:
-
-/usr/include/gconv.h:
-
-/usr/lib/gcc/i486-linux-gnu/4.0.3/include/stdarg.h:
-
-/usr/include/bits/stdio_lim.h:
-
-/usr/include/bits/sys_errlist.h:
-
-/usr/include/bits/stdio.h:
-
-/usr/include/unistd.h:
-
-/usr/include/bits/posix_opt.h:
-
-/usr/include/bits/environments.h:
-
-/usr/include/bits/confname.h:
-
-/usr/include/getopt.h:
-
-/usr/include/errno.h:
-
-/usr/include/bits/errno.h:
-
-/usr/include/linux/errno.h:
-
-/usr/include/asm/errno.h:
-
-/usr/include/asm-i386/errno.h:
-
-/usr/include/sys/types.h:
-
-/usr/include/time.h:
-
-/usr/include/endian.h:
-
-/usr/include/bits/endian.h:
-
-/usr/include/sys/select.h:
-
-/usr/include/bits/select.h:
-
-/usr/include/bits/sigset.h:
-
-/usr/include/bits/time.h:
-
-/usr/include/sys/sysmacros.h:
-
-/usr/include/bits/pthreadtypes.h:
-
-/usr/include/bits/sched.h:
-
-/usr/include/sys/stat.h:
-
-/usr/include/bits/stat.h:
-
-/usr/include/stdlib.h:
-
-/usr/include/bits/waitflags.h:
-
-/usr/include/bits/waitstatus.h:
-
-/usr/include/xlocale.h:
-
-/usr/include/alloca.h:
-
-/usr/include/dirent.h:
-
-/usr/include/bits/dirent.h:
-
-/usr/include/bits/posix1_lim.h:
-
-/usr/include/bits/local_lim.h:
-
-/usr/include/linux/limits.h:
-
-/usr/include/string.h:
-
-/usr/include/bits/string.h:
-
-/usr/include/bits/string2.h:
-
-/usr/include/fcntl.h:
-
-/usr/include/bits/fcntl.h:
-
-/usr/include/sys/poll.h:
-
-/usr/include/bits/poll.h:
-
-/usr/include/sys/mman.h:
-
-/usr/include/bits/mman.h:
-
-/usr/include/signal.h:
-
-/usr/include/bits/signum.h:
-
-/usr/include/bits/siginfo.h:
-
-/usr/include/bits/sigaction.h:
-
-/usr/include/bits/sigcontext.h:
-
-/usr/include/asm/sigcontext.h:
-
-/usr/include/asm-i386/sigcontext.h:
-
-/usr/include/bits/sigstack.h:
-
-/usr/include/sys/ucontext.h:
-
-/usr/include/bits/sigthread.h:
-
-/usr/include/pthread.h:
-
-/usr/include/sched.h:
-
-/usr/include/bits/initspin.h:
-
-/usr/include/asm/ioctl.h:
-
-/usr/include/asm-i386/ioctl.h:
-
-/usr/include/asm/types.h:
-
-/usr/include/asm-i386/types.h:
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# lttd/Makefile. Generated from Makefile.in by configure.
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-# Empty TraceDaemon Makefile.am. Insert a real one here.
-
-srcdir = .
-top_srcdir = ..
-
-pkgdatadir = $(datadir)/ltt-control
-pkglibdir = $(libdir)/ltt-control
-pkgincludedir = $(includedir)/ltt-control
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /usr/bin/install -c
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = i686-pc-linux-gnu
-ACLOCAL = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run aclocal-1.7
-AMDEP_FALSE = #
-AMDEP_TRUE =
-AMTAR = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoconf
-AUTOHEADER = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run autoheader
-AUTOMAKE = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run automake-1.7
-AWK = mawk
-BASH = /bin/sh
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2
-CPP = gcc -E
-CPPFLAGS =
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEFAULT_INCLUDES = -I$(top_srcdir) -I$(top_builddir)
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C =
-ECHO_N = -n
-ECHO_T =
-EGREP = /bin/grep -E
-EXEEXT =
-F77 =
-FFLAGS =
-GREP = /bin/grep
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-LDFLAGS =
-LIBOBJS =
-
-LIBS = $(THREAD_LIBS)
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS =
-MAKEINFO = ${SHELL} /usr/src/ltt-control-0.24-17092006/missing --run makeinfo
-OBJEXT = o
-PACKAGE = ltt-control
-PACKAGE_BUGREPORT = BUG-REPORT-ADDRESS
-PACKAGE_CFLAGS = -Wall -Wformat
-PACKAGE_LIBS =
-PACKAGE_NAME = FULL-PACKAGE-NAME
-PACKAGE_STRING = FULL-PACKAGE-NAME VERSION
-PACKAGE_TARNAME = full-package-name
-PACKAGE_VERSION = VERSION
-PATH_SEPARATOR = :
-RANLIB = ranlib
-SET_MAKE =
-SHELL = /bin/sh
-STRIP = strip
-THREAD_LIBS = -lpthread
-UTIL_LIBS = -lutil
-VERSION = 0.24-17092006
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 =
-am__fastdepCC_FALSE = #
-am__fastdepCC_TRUE =
-am__fastdepCXX_FALSE = #
-am__fastdepCXX_TRUE =
-am__include = include
-am__leading_dot = .
-am__quote =
-bindir = ${exec_prefix}/bin
-build = i686-pc-linux-gnu
-build_alias =
-build_cpu = i686
-build_os = linux-gnu
-build_vendor = pc
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = i686-pc-linux-gnu
-host_alias =
-host_cpu = i686
-host_os = linux-gnu
-host_vendor = pc
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = /usr/src/ltt-control-0.24-17092006/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-lttctlincludedir = ${prefix}/include/liblttctl
-mandir = ${datarootdir}/man
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-sysconfdir = ${prefix}/etc
-target_alias =
-
-bin_PROGRAMS = lttd
-
-lttd_SOURCES = lttd.c
-subdir = lttd
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-bin_PROGRAMS = lttd$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-
-am_lttd_OBJECTS = lttd.$(OBJEXT)
-lttd_OBJECTS = $(am_lttd_OBJECTS)
-lttd_LDADD = $(LDADD)
-lttd_DEPENDENCIES =
-lttd_LDFLAGS =
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-DEP_FILES = ./$(DEPDIR)/lttd.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
- $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(lttd_SOURCES)
-DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
-SOURCES = $(lttd_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu lttd/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
- done
-
-clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-lttd$(EXEEXT): $(lttd_OBJECTS) $(lttd_DEPENDENCIES)
- @rm -f lttd$(EXEEXT)
- $(LINK) $(lttd_LDFLAGS) $(lttd_OBJECTS) $(lttd_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-include ./$(DEPDIR)/lttd.Po
-
-.c.o:
- if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=no \
-# depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
- if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=no \
-# depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
-
-.c.lo:
- if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
- -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
- then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \
- else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
- fi
-# source='$<' object='$@' libtool=yes \
-# depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' \
-# $(CCDEPMODE) $(depcomp) \
-# $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(bindir)
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic clean-libtool ctags distclean distclean-compile \
- distclean-generic distclean-libtool distclean-tags distdir dvi \
- dvi-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Empty TraceDaemon Makefile.am. Insert a real one here.
-
-LIBS += $(THREAD_LIBS)
-
-bin_PROGRAMS = lttd
-
-lttd_SOURCES = lttd.c
-
+++ /dev/null
-# Makefile.in generated by automake 1.7.9 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Empty TraceDaemon Makefile.am. Insert a real one here.
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_INCLUDES = @DEFAULT_INCLUDES@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-
-LIBS = @LIBS@ $(THREAD_LIBS)
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_CFLAGS = @PACKAGE_CFLAGS@
-PACKAGE_LIBS = @PACKAGE_LIBS@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-THREAD_LIBS = @THREAD_LIBS@
-UTIL_LIBS = @UTIL_LIBS@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lttctlincludedir = @lttctlincludedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-bin_PROGRAMS = lttd
-
-lttd_SOURCES = lttd.c
-subdir = lttd
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-bin_PROGRAMS = lttd$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-
-am_lttd_OBJECTS = lttd.$(OBJEXT)
-lttd_OBJECTS = $(am_lttd_OBJECTS)
-lttd_LDADD = $(LDADD)
-lttd_DEPENDENCIES =
-lttd_LDFLAGS =
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/lttd.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
- $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(lttd_SOURCES)
-DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
-SOURCES = $(lttd_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu lttd/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
- done
-
-clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f $$p $$f"; \
- rm -f $$p $$f ; \
- done
-lttd$(EXEEXT): $(lttd_OBJECTS) $(lttd_DEPENDENCIES)
- @rm -f lttd$(EXEEXT)
- $(LINK) $(lttd_LDFLAGS) $(lttd_OBJECTS) $(lttd_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lttd.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
-
-.c.lo:
-@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(bindir)
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic clean-libtool ctags distclean distclean-compile \
- distclean-generic distclean-libtool distclean-tags distdir dvi \
- dvi-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-/* lttd
- *
- * Linux Trace Toolkit Daemon
- *
- * This is a simple daemon that reads a few relay+debugfs channels and save
- * them in a trace.
- *
- *
- * Copyright 2005 -
- * Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
- */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#define _REENTRANT
-#define _GNU_SOURCE
-#include <features.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <stdlib.h>
-#include <dirent.h>
-#include <string.h>
-#include <fcntl.h>
-#include <sys/poll.h>
-#include <sys/mman.h>
-#include <signal.h>
-#include <pthread.h>
-
-/* Relayfs IOCTL */
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* Get the next sub buffer that can be read. */
-#define RELAY_GET_SUBBUF _IOR(0xF4, 0x00,__u32)
-/* Release the oldest reserved (by "get") sub buffer. */
-#define RELAY_PUT_SUBBUF _IOW(0xF4, 0x01,__u32)
-/* returns the number of sub buffers in the per cpu channel. */
-#define RELAY_GET_N_SUBBUFS _IOR(0xF4, 0x02,__u32)
-/* returns the size of the sub buffers. */
-#define RELAY_GET_SUBBUF_SIZE _IOR(0xF4, 0x03,__u32)
-
-
-
-enum {
- GET_SUBBUF,
- PUT_SUBBUF,
- GET_N_BUBBUFS,
- GET_SUBBUF_SIZE
-};
-
-struct fd_pair {
- int channel;
- int trace;
- unsigned int n_subbufs;
- unsigned int subbuf_size;
- void *mmap;
- pthread_mutex_t mutex;
-};
-
-struct channel_trace_fd {
- struct fd_pair *pair;
- int num_pairs;
-};
-
-static char *trace_name = NULL;
-static char *channel_name = NULL;
-static int daemon_mode = 0;
-static int append_mode = 0;
-static unsigned long num_threads = 1;
-volatile static int quit_program = 0; /* For signal handler */
-static int dump_flight_only = 0;
-static int dump_normal_only = 0;
-
-/* Args :
- *
- * -t directory Directory name of the trace to write to. Will be created.
- * -c directory Root directory of the debugfs trace channels.
- * -d Run in background (daemon).
- * -a Trace append mode.
- * -s Send SIGUSR1 to parent when ready for IO.
- */
-void show_arguments(void)
-{
- printf("Please use the following arguments :\n");
- printf("\n");
- printf("-t directory Directory name of the trace to write to.\n"
- " It will be created.\n");
- printf("-c directory Root directory of the debugfs trace channels.\n");
- printf("-d Run in background (daemon).\n");
- printf("-a Append to an possibly existing trace.\n");
- printf("-N Number of threads to start.\n");
- printf("-f Dump only flight recorder channels.\n");
- printf("-n Dump only normal channels.\n");
- printf("\n");
-}
-
-
-/* parse_arguments
- *
- * Parses the command line arguments.
- *
- * Returns 1 if the arguments were correct, but doesn't ask for program
- * continuation. Returns -1 if the arguments are incorrect, or 0 if OK.
- */
-int parse_arguments(int argc, char **argv)
-{
- int ret = 0;
- int argn = 1;
-
- if(argc == 2) {
- if(strcmp(argv[1], "-h") == 0) {
- return 1;
- }
- }
-
- while(argn < argc) {
-
- switch(argv[argn][0]) {
- case '-':
- switch(argv[argn][1]) {
- case 't':
- if(argn+1 < argc) {
- trace_name = argv[argn+1];
- argn++;
- }
- break;
- case 'c':
- if(argn+1 < argc) {
- channel_name = argv[argn+1];
- argn++;
- }
- break;
- case 'd':
- daemon_mode = 1;
- break;
- case 'a':
- append_mode = 1;
- break;
- case 'N':
- if(argn+1 < argc) {
- num_threads = strtoul(argv[argn+1], NULL, 0);
- argn++;
- }
- break;
- case 'f':
- dump_flight_only = 1;
- break;
- case 'n':
- dump_normal_only = 1;
- break;
- default:
- printf("Invalid argument '%s'.\n", argv[argn]);
- printf("\n");
- ret = -1;
- }
- break;
- default:
- printf("Invalid argument '%s'.\n", argv[argn]);
- printf("\n");
- ret = -1;
- }
- argn++;
- }
-
- if(trace_name == NULL) {
- printf("Please specify a trace name.\n");
- printf("\n");
- ret = -1;
- }
-
- if(channel_name == NULL) {
- printf("Please specify a channel name.\n");
- printf("\n");
- ret = -1;
- }
-
- return ret;
-}
-
-void show_info(void)
-{
- printf("Linux Trace Toolkit Trace Daemon\n");
- printf("\n");
- printf("Reading from debugfs directory : %s\n", channel_name);
- printf("Writing to trace directory : %s\n", trace_name);
- printf("\n");
-}
-
-
-/* signal handling */
-
-static void handler(int signo)
-{
- printf("Signal %d received : exiting cleanly\n", signo);
- quit_program = 1;
-}
-
-
-
-int open_channel_trace_pairs(char *subchannel_name, char *subtrace_name,
- struct channel_trace_fd *fd_pairs)
-{
- DIR *channel_dir = opendir(subchannel_name);
- struct dirent *entry;
- struct stat stat_buf;
- int ret;
- char path_channel[PATH_MAX];
- int path_channel_len;
- char *path_channel_ptr;
- char path_trace[PATH_MAX];
- int path_trace_len;
- char *path_trace_ptr;
- int open_ret = 0;
-
- if(channel_dir == NULL) {
- perror(subchannel_name);
- open_ret = ENOENT;
- goto end;
- }
-
- printf("Creating trace subdirectory %s\n", subtrace_name);
- ret = mkdir(subtrace_name, S_IRWXU|S_IRWXG|S_IRWXO);
- if(ret == -1) {
- if(errno != EEXIST) {
- perror(subtrace_name);
- open_ret = -1;
- goto end;
- }
- }
-
- strncpy(path_channel, subchannel_name, PATH_MAX-1);
- path_channel_len = strlen(path_channel);
- path_channel[path_channel_len] = '/';
- path_channel_len++;
- path_channel_ptr = path_channel + path_channel_len;
-
- strncpy(path_trace, subtrace_name, PATH_MAX-1);
- path_trace_len = strlen(path_trace);
- path_trace[path_trace_len] = '/';
- path_trace_len++;
- path_trace_ptr = path_trace + path_trace_len;
-
- while((entry = readdir(channel_dir)) != NULL) {
-
- if(entry->d_name[0] == '.') continue;
-
- strncpy(path_channel_ptr, entry->d_name, PATH_MAX - path_channel_len);
- strncpy(path_trace_ptr, entry->d_name, PATH_MAX - path_trace_len);
-
- ret = stat(path_channel, &stat_buf);
- if(ret == -1) {
- perror(path_channel);
- continue;
- }
-
- printf("Channel file : %s\n", path_channel);
-
- if(S_ISDIR(stat_buf.st_mode)) {
-
- printf("Entering channel subdirectory...\n");
- ret = open_channel_trace_pairs(path_channel, path_trace, fd_pairs);
- if(ret < 0) continue;
- } else if(S_ISREG(stat_buf.st_mode)) {
- if(strncmp(entry->d_name, "flight-", sizeof("flight-")-1) != 0) {
- if(dump_flight_only) {
- printf("Skipping normal channel %s\n", path_channel);
- continue;
- }
- } else {
- if(dump_normal_only) {
- printf("Skipping flight channel %s\n", path_channel);
- continue;
- }
- }
- printf("Opening file.\n");
-
- fd_pairs->pair = realloc(fd_pairs->pair,
- ++fd_pairs->num_pairs * sizeof(struct fd_pair));
-
- /* Open the channel in read mode */
- fd_pairs->pair[fd_pairs->num_pairs-1].channel =
- open(path_channel, O_RDONLY | O_NONBLOCK);
- if(fd_pairs->pair[fd_pairs->num_pairs-1].channel == -1) {
- perror(path_channel);
- fd_pairs->num_pairs--;
- continue;
- }
- /* Open the trace in write mode, only append if append_mode */
- ret = stat(path_trace, &stat_buf);
- if(ret == 0) {
- if(append_mode) {
- printf("Appending to file %s as requested\n", path_trace);
-
- fd_pairs->pair[fd_pairs->num_pairs-1].trace =
- open(path_trace, O_WRONLY|O_APPEND,
- S_IRWXU|S_IRWXG|S_IRWXO);
-
- if(fd_pairs->pair[fd_pairs->num_pairs-1].trace == -1) {
- perror(path_trace);
- }
- } else {
- printf("File %s exists, cannot open. Try append mode.\n", path_trace);
- open_ret = -1;
- goto end;
- }
- } else {
- if(errno == ENOENT) {
- fd_pairs->pair[fd_pairs->num_pairs-1].trace =
- open(path_trace, O_WRONLY|O_CREAT|O_EXCL,
- S_IRWXU|S_IRWXG|S_IRWXO);
- if(fd_pairs->pair[fd_pairs->num_pairs-1].trace == -1) {
- perror(path_trace);
- }
- }
- }
- }
- }
-
-end:
- closedir(channel_dir);
-
- return open_ret;
-}
-
-
-int read_subbuffer(struct fd_pair *pair)
-{
- unsigned int consumed_old;
- int err, ret=0;
-
-
- err = ioctl(pair->channel, RELAY_GET_SUBBUF,
- &consumed_old);
- printf("cookie : %u\n", consumed_old);
- if(err != 0) {
- ret = errno;
- perror("Reserving sub buffer failed (everything is normal, it is due to concurrency)");
- goto get_error;
- }
-
- err = TEMP_FAILURE_RETRY(write(pair->trace,
- pair->mmap
- + (consumed_old & ((pair->n_subbufs * pair->subbuf_size)-1)),
- pair->subbuf_size));
-
- if(err < 0) {
- ret = errno;
- perror("Error in writing to file");
- goto write_error;
- }
-#if 0
- err = fsync(pair->trace);
- if(err < 0) {
- ret = errno;
- perror("Error in writing to file");
- goto write_error;
- }
-#endif //0
-write_error:
- err = ioctl(pair->channel, RELAY_PUT_SUBBUF, &consumed_old);
- if(err != 0) {
- ret = errno;
- if(errno == EFAULT) {
- perror("Error in unreserving sub buffer\n");
- } else if(errno == EIO) {
- perror("Reader has been pushed by the writer, last subbuffer corrupted.");
- /* FIXME : we may delete the last written buffer if we wish. */
- }
- goto get_error;
- }
-
-get_error:
- return ret;
-}
-
-
-
-int map_channels(struct channel_trace_fd *fd_pairs)
-{
- int i,j;
- int ret=0;
-
- if(fd_pairs->num_pairs <= 0) {
- printf("No channel to read\n");
- goto end;
- }
-
- /* Get the subbuf sizes and number */
-
- for(i=0;i<fd_pairs->num_pairs;i++) {
- struct fd_pair *pair = &fd_pairs->pair[i];
-
- ret = ioctl(pair->channel, RELAY_GET_N_SUBBUFS,
- &pair->n_subbufs);
- if(ret != 0) {
- perror("Error in getting the number of subbuffers");
- goto end;
- }
- ret = ioctl(pair->channel, RELAY_GET_SUBBUF_SIZE,
- &pair->subbuf_size);
- if(ret != 0) {
- perror("Error in getting the size of the subbuffers");
- goto end;
- }
- ret = pthread_mutex_init(&pair->mutex, NULL); /* Fast mutex */
- if(ret != 0) {
- perror("Error in mutex init");
- goto end;
- }
- }
-
- /* Mmap each FD */
- for(i=0;i<fd_pairs->num_pairs;i++) {
- struct fd_pair *pair = &fd_pairs->pair[i];
-
- pair->mmap = mmap(0, pair->subbuf_size * pair->n_subbufs, PROT_READ,
- MAP_SHARED, pair->channel, 0);
- if(pair->mmap == MAP_FAILED) {
- perror("Mmap error");
- goto munmap;
- }
- }
-
- goto end; /* success */
-
- /* Error handling */
- /* munmap only the successfully mmapped indexes */
-munmap:
- /* Munmap each FD */
- for(j=0;j<i;j++) {
- struct fd_pair *pair = &fd_pairs->pair[j];
- int err_ret;
-
- err_ret = munmap(pair->mmap, pair->subbuf_size * pair->n_subbufs);
- if(err_ret != 0) {
- perror("Error in munmap");
- }
- ret |= err_ret;
- }
-
-end:
- return ret;
-
-
-}
-
-
-int unmap_channels(struct channel_trace_fd *fd_pairs)
-{
- int j;
- int ret=0;
-
- /* Munmap each FD */
- for(j=0;j<fd_pairs->num_pairs;j++) {
- struct fd_pair *pair = &fd_pairs->pair[j];
- int err_ret;
-
- err_ret = munmap(pair->mmap, pair->subbuf_size * pair->n_subbufs);
- if(err_ret != 0) {
- perror("Error in munmap");
- }
- ret |= err_ret;
- err_ret = pthread_mutex_destroy(&pair->mutex);
- if(err_ret != 0) {
- perror("Error in mutex destroy");
- }
- ret |= err_ret;
- }
-
- return ret;
-}
-
-
-/* read_channels
- *
- * Thread worker.
- *
- * Read the debugfs channels and write them in the paired tracefiles.
- *
- * @fd_pairs : paired channels and trace files.
- *
- * returns (void*)0 on success, (void*)-1 on error.
- *
- * Note that the high priority polled channels are consumed first. We then poll
- * again to see if these channels are still in priority. Only when no
- * high priority channel is left, we start reading low priority channels.
- *
- * Note that a channel is considered high priority when the buffer is almost
- * full.
- */
-
-void * read_channels(void *arg)
-{
- struct pollfd *pollfd;
- int i,j;
- int num_rdy, num_hup;
- int high_prio;
- int ret = 0;
- struct channel_trace_fd *fd_pairs = (struct channel_trace_fd *)arg;
-
- /* Start polling the FD */
-
- pollfd = malloc(fd_pairs->num_pairs * sizeof(struct pollfd));
-
- /* Note : index in pollfd is the same index as fd_pair->pair */
- for(i=0;i<fd_pairs->num_pairs;i++) {
- pollfd[i].fd = fd_pairs->pair[i].channel;
- pollfd[i].events = POLLIN|POLLPRI;
- }
-
- while(1) {
- high_prio = 0;
- num_hup = 0;
-#ifdef DEBUG
- printf("Press a key for next poll...\n");
- char buf[1];
- read(STDIN_FILENO, &buf, 1);
- printf("Next poll (polling %d fd) :\n", fd_pairs->num_pairs);
-#endif //DEBUG
-
- /* Have we received a signal ? */
- if(quit_program) break;
-
- num_rdy = poll(pollfd, fd_pairs->num_pairs, -1);
- if(num_rdy == -1) {
- perror("Poll error");
- goto free_fd;
- }
-
- printf("Data received\n");
-
- for(i=0;i<fd_pairs->num_pairs;i++) {
- switch(pollfd[i].revents) {
- case POLLERR:
- printf("Error returned in polling fd %d.\n", pollfd[i].fd);
- num_hup++;
- break;
- case POLLHUP:
- printf("Polling fd %d tells it has hung up.\n", pollfd[i].fd);
- num_hup++;
- break;
- case POLLNVAL:
- printf("Polling fd %d tells fd is not open.\n", pollfd[i].fd);
- num_hup++;
- break;
- case POLLPRI:
- if(pthread_mutex_trylock(&fd_pairs->pair[i].mutex) == 0) {
- printf("Urgent read on fd %d\n", pollfd[i].fd);
- /* Take care of high priority channels first. */
- high_prio = 1;
- /* it's ok to have an unavailable subbuffer */
- ret = read_subbuffer(&fd_pairs->pair[i]);
- if(ret == EAGAIN) ret = 0;
-
- ret = pthread_mutex_unlock(&fd_pairs->pair[i].mutex);
- if(ret)
- printf("Error in mutex unlock : %s\n", strerror(ret));
- }
- break;
- }
- }
- /* If every FD has hung up, we end the read loop here */
- if(num_hup == fd_pairs->num_pairs) break;
-
- if(!high_prio) {
- for(i=0;i<fd_pairs->num_pairs;i++) {
- switch(pollfd[i].revents) {
- case POLLIN:
- if(pthread_mutex_trylock(&fd_pairs->pair[i].mutex) == 0) {
- /* Take care of low priority channels. */
- printf("Normal read on fd %d\n", pollfd[i].fd);
- /* it's ok to have an unavailable subbuffer */
- ret = read_subbuffer(&fd_pairs->pair[i]);
- if(ret == EAGAIN) ret = 0;
-
- ret = pthread_mutex_unlock(&fd_pairs->pair[i].mutex);
- if(ret)
- printf("Error in mutex unlock : %s\n", strerror(ret));
- }
- break;
- }
- }
- }
-
- }
-
-free_fd:
- free(pollfd);
-
-end:
- return (void*)ret;
-}
-
-
-void close_channel_trace_pairs(struct channel_trace_fd *fd_pairs)
-{
- int i;
- int ret;
-
- for(i=0;i<fd_pairs->num_pairs;i++) {
- ret = close(fd_pairs->pair[i].channel);
- if(ret == -1) perror("Close error on channel");
- ret = close(fd_pairs->pair[i].trace);
- if(ret == -1) perror("Close error on trace");
- }
- free(fd_pairs->pair);
-}
-
-int main(int argc, char ** argv)
-{
- int ret = 0;
- struct channel_trace_fd fd_pairs = { NULL, 0 };
- struct sigaction act;
- pthread_t *tids;
- unsigned int i;
- void *tret;
-
- ret = parse_arguments(argc, argv);
-
- if(ret != 0) show_arguments();
- if(ret < 0) return EINVAL;
- if(ret > 0) return 0;
-
- show_info();
-
- if(daemon_mode) {
- ret = daemon(0, 0);
-
- if(ret == -1) {
- perror("An error occured while daemonizing.");
- exit(-1);
- }
- }
-
- /* Connect the signal handlers */
- act.sa_handler = handler;
- act.sa_flags = 0;
- sigemptyset(&(act.sa_mask));
- sigaddset(&(act.sa_mask), SIGTERM);
- sigaddset(&(act.sa_mask), SIGQUIT);
- sigaddset(&(act.sa_mask), SIGINT);
- sigaction(SIGTERM, &act, NULL);
- sigaction(SIGQUIT, &act, NULL);
- sigaction(SIGINT, &act, NULL);
-
-
- if(ret = open_channel_trace_pairs(channel_name, trace_name, &fd_pairs))
- goto close_channel;
-
- if(ret = map_channels(&fd_pairs))
- goto close_channel;
-
- tids = malloc(sizeof(pthread_t) * num_threads);
- for(i=0; i<num_threads; i++) {
- ret = pthread_create(&tids[i], NULL, read_channels, &fd_pairs);
- if(ret) {
- perror("Error creating thread");
- break;
- }
- }
-
- for(i=0; i<num_threads; i++) {
- ret = pthread_join(tids[i], &tret);
- if(ret) {
- perror("Error joining thread");
- break;
- }
- if((int)tret != 0) {
- printf("Error %s occured in thread %u\n", strerror((int)tret), i);
- }
- }
-
- free(tids);
-
- ret |= unmap_channels(&fd_pairs);
-
-close_channel:
- close_channel_trace_pairs(&fd_pairs);
-
- return ret;
-}
+++ /dev/null
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-case "$1" in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing 0.4 - GNU automake"
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
- aclocal*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case "$f" in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if [ ! -f y.tab.h ]; then
- echo >y.tab.h
- fi
- if [ ! -f y.tab.c ]; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if [ ! -f lex.yy.c ]; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
- # We have makeinfo, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
- fi
- touch $file
- ;;
-
- tar)
- shift
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- fi
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case "$firstarg" in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case "$firstarg" in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
- case $1 in
- -h | --help | --h*) # -h for help
- echo "$usage" 1>&2
- exit 0
- ;;
- -m) # -m PERM arg
- shift
- test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
- dirmode=$1
- shift
- ;;
- --) # stop option processing
- shift
- break
- ;;
- -*) # unknown option
- echo "$usage" 1>&2
- exit 1
- ;;
- *) # first non-opt arg
- break
- ;;
- esac
-done
-
-for file
-do
- if test -d "$file"; then
- shift
- else
- break
- fi
-done
-
-case $# in
- 0) exit 0 ;;
-esac
-
-case $dirmode in
- '')
- if mkdir -p -- . 2>/dev/null; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
- fi
- ;;
- *)
- if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
- fi
- ;;
-esac
-
-for file
-do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
-
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case $pathcomp in
- -*) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- else
- if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
- lasterr=""
- chmod "$dirmode" "$pathcomp" || lasterr=$?
-
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
- fi
- fi
-
- pathcomp="$pathcomp/"
- done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# End:
-# mkinstalldirs ends here
+++ /dev/null
-timestamp for config.h
projects / ltt-control.git / commitdiff
