Jérémie Galarneau [Mon, 4 May 2020 23:04:02 +0000 (19:04 -0400)]
consumerd: cleanup: use buffer view interface for mmap read subbuf
Replace explicit pointer + size parameters by an lttng_buffer_view
in lttng_consumer_on_read_subbuffer_mmap().
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I76f35b3e295c596cdf4bbb8a6d01168a850a721a
Jérémie Galarneau [Mon, 4 May 2020 22:21:48 +0000 (18:21 -0400)]
consumerd: move address computation from on_read_subbuffer_mmap
The computation of the subbuffer's address is moved outside of
lttng_consumer_on_read_subbuffer_mmap to make it usable with a regular
buffer. This facilitates an upcoming change.
Moreover this has the benefit of isolating domain-specific logic from
this function which is supposed to be domain-agnostic.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I16f8ccaa73804f98fa03e69136548e6d6b7782e5
Jérémie Galarneau [Wed, 29 Apr 2020 04:03:43 +0000 (00:03 -0400)]
consumerd: refactor: combine duplicated check_*_functions
The check_ust_stream and check_kernel_stream functions are identical
except for the call to the domain-specific call to
consumer_flush_*_index.
A "flush_index" callback is passed to check_stream in order to share
the rest of that code.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Iafdb64192322c0106a555b67f54290dadc4f0579
Jérémie Galarneau [Wed, 29 Apr 2020 01:40:12 +0000 (21:40 -0400)]
kerner-ctl: add RING_RING_BUFFER_GET_NEXT_SUBBUF_METADATA_CHECK
Add a wrapper for RING_RING_BUFFER_GET_NEXT_SUBBUF_METADATA_CHECK
which gets the next metadata subbuffer and returns a boolean flag
indicating whether the metadata is guaranteed to be in a consistent
state at the end of this sub-buffer (can be parsed).
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I13fbdfe51c3c4ef04581409e0fbc9837ed6d555d
Jérémie Galarneau [Fri, 15 May 2020 20:04:11 +0000 (16:04 -0400)]
Add lttng_dynamic_buffer_append_view util
Add lttng_dynamic_buffer_append_view() which appends the contents
of a buffer view to a dynamic buffer.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I4082ba2c848b79aa2116847987067453638de441
Jérémie Galarneau [Thu, 14 May 2020 20:08:56 +0000 (16:08 -0400)]
Fix: lttng: Destroying session message repeated during destruction
Observed Issue
==============
The `Destroying session X` is repeated indifinitely whenever
the data pending phase lasts more than one iteration.
```
$ lttng destroy
Destroying session eloi_turcotte.Destroying session
eloi_turcotte.Destroying session eloi_turcotte.Destroying session
eloi_turcotte.D
```
Cause
=====
Missing check that the message has been printed.
Solution
========
Use the same check as is done later for
lttng_destruction_handle_wait_for_completion().
Known drawbacks
===============
None.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I6cd29d917925644a4994c515b4177bbd05ffa98e
Jérémie Galarneau [Tue, 19 May 2020 21:00:23 +0000 (17:00 -0400)]
Update version to v2.11.4
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Tue, 19 May 2020 16:23:18 +0000 (12:23 -0400)]
Fix: common: abort on rotation after time manipulation
Observed issue
==============
Core dump:
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x0000003eb4025548 in __GI_abort () at abort.c:79
#2 0x0000003eb402542f in __assert_fail_base (fmt=0x3eb4184ae0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x4cdee0 "(trace_chunk->timestamp_close).is_set",
file=0x4cde78 "../../../lttng-tools-2.11.3/src/common/trace-chunk.c", line=903, function=0x4cf4a0 <__PRETTY_FUNCTION__.6756> "lttng_trace_chunk_move_to_completed")
at assert.c:92
#3 0x0000003eb4033af2 in __GI___assert_fail (assertion=assertion@entry=0x4cdee0 "(trace_chunk->timestamp_close).is_set",
file=file@entry=0x4cde78 "../../../lttng-tools-2.11.3/src/common/trace-chunk.c", line=line@entry=903,
function=function@entry=0x4cf4a0 <__PRETTY_FUNCTION__.6756> "lttng_trace_chunk_move_to_completed") at assert.c:101
#4 0x000000000047f37e in lttng_trace_chunk_move_to_completed (trace_chunk=0x7fcb5c00e570) at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:903
#5 0x0000000000480755 in lttng_trace_chunk_release (ref=0x7fcb5c00e598) at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1117
#6 urcu_ref_put (release=<optimized out>, ref=0x7fcb5c00e598) at /usr/include/urcu/ref.h:68
#7 lttng_trace_chunk_put (chunk=0x7fcb5c00e570) at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1150
#8 0x0000000000429c22 in cmd_rotate_session (session=0x7fcb5c003ff0, rotate_return=rotate_return@entry=0x7fcb6b7ed470, quiet_rotation=quiet_rotation@entry=false)
at ../../../../lttng-tools-2.11.3/src/bin/lttng-sessiond/cmd.c:5037
#9 0x00000000004451d7 in process_client_msg (cmd_ctx=0x7fcb5c00e760, sock=sock@entry=0x7fcb6b7fd4c0, sock_error=sock_error@entry=0x7fcb6b7fd4c4)
at ../../../../lttng-tools-2.11.3/src/bin/lttng-sessiond/client.c:1852
#10 0x00000000004474c6 in thread_manage_clients (data=<optimized out>) at ../../../../lttng-tools-2.11.3/src/bin/lttng-sessiond/client.c:2199
#11 0x00000000004422f2 in launch_thread (data=0x4f97a0) at ../../../../lttng-tools-2.11.3/src/bin/lttng-sessiond/thread.c:75
#12 0x0000003eb4408ed4 in start_thread (arg=<optimized out>) at pthread_create.c:479
#13 0x0000003eb40f8e6f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Reproduction:
Disable ntp/any time management mechanism.
lttng create
lttng enable-event -u 'lttng_ust_tracef:*'
lttng start
lttng rotate
date --set="$(date --date='-1 hour')"
lttng rotate auto-
20200515-142503
Waiting for rotation to complete
Error: Failed to query the state of the rotation.
Logs:
DEBUG1 - 12:25:28.
570037987 [2660/2717]: Setting trace chunk close command to "move to completed chunk folder" (in lttng_trace_chunk_set_close_command() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1073)
Error: Failed to set trace chunk close timestamp: close timestamp is before creation timestamp
Error: Failed to set the close timestamp of the current trace chunk of session "auto-
20200515-142503"
lttng-sessiond: ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:903: lttng_trace_chunk_move_to_completed: Assertion `(trace_chunk->timestamp_close).is_set' failed.
...
Aborted (core dumped)
root@X10SDV-8C-TLN4F:~# DEBUG1 - 12:25:29.
534263017 [2739/2739]: Releasing trace chunk registry to all trace chunks (in lttng_trace_chunk_registry_put_each_chunk() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1414)
DEBUG1 - 12:25:29.
534317468 [2739/2739]: Releasing reference to trace chunk: session_id = 0chunk_id = 2, name = "20200515T122528+0000-2", status = closed (in lttng_trace_chunk_registry_put_each_chunk() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1435)
DEBUG1 - 12:25:29.
534365653 [2739/2739]: Releasing reference to trace chunk: session_id = 0chunk_id = 1, name = "20200515T142520+0000-1", status = closed (in lttng_trace_chunk_registry_put_each_chunk() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1435)
DEBUG1 - 12:25:29.
534400638 [2739/2739]: Released reference to 2 trace chunks in lttng_trace_chunk_registry_put_each_chunk() (in lttng_trace_chunk_registry_put_each_chunk() at ../../../lttng-tools-2.11.3/src/common/trace-chunk.c:1447)
Error: 2 trace chunks are leaked by lttng-consumerd. This can be caused by an internal error of the session daemon.
Cause
=====
The trace_chunk->timestamp_close is not set since the result from time()
is smaller than the creation timestamp.
The close timestamp is smaller because the calendar system time is
modified by an administrator.
time() offers no monotonicity guarantee and hence is exposed to time
modification of the system.
The begin and close timestamps are strictly used in the name generation
of the chunk/archives. Given the current usage of these timestamps
validating monotonicity should not be a fatal error. Name uniqueness is
provided by the chunk name suffix (auto increment).
Solution
========
Do not enforce monotonicity for the begin and close timestamps but warn
on unexpected return (begin > close).
Known drawbacks
=========
None.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ic4b17285d150358d1569d6821c451c243e64e9a1
Francis Deslauriers [Mon, 4 May 2020 19:59:22 +0000 (15:59 -0400)]
Fix: tests: `-Wstringop-overflow` warning
I get the following warning when compiling with `-Wall -Werror` with gcc
9.3.0:
In file included from ../../src/common/macros.h:15,
from ../../src/common/lttng-kernel.h:14,
from ../../src/bin/lttng-sessiond/trace-kernel.h:14,
from test_kernel_data.c:16:
In function ‘lttng_strnlen’,
inlined from ‘lttng_strncpy’ at ../../src/common/macros.h:120:6,
inlined from ‘test_create_kernel_event’ at test_kernel_data.c:136:2:
../../src/common/compat/string.h:28:8: error: ‘memchr’ reading 256 bytes from a region of size 11 [-Werror=stringop-overflow=]
28 | end = memchr(str, 0, max);
| ^~~~~~~~~~~~~~~~~~~
Fix this warning by using the RANDOM_STRING_LEN value as the max number
of bytes to copy.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I61752ee17163c4d642aad21b296c0fc4fad5b7a6
(cherry picked from commit
1dd622b10db0821d77490c937caee80c65332f14)
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Tue, 7 Apr 2020 20:27:05 +0000 (16:27 -0400)]
Fix: load: incomplete error handling for load_session_from_file
Observed issue
==============
lttng-ivc test fails to fail.
test_save_load_blocking_timeout[lttng-tools-2.12-lttng-tools-2.11-False]
Here we load a xml created by lttng-tools-2.12 and try to load it using
lttng-tools 2.11. We expect this to fail on the load.
The command report an error on the stderr but the command return code
value is zero.
From lttng-ivc test runtime.log:
Command #0
Return value: 0
Command: lttng load --input-path=/home/joraj/lttng/lttng-ivc/.tox/py3/tmp/test_save_load_blocking_timeou0/save_load saved_trace
STDOUT:
Session saved_trace has been loaded successfully
STDERR:
XML Error: Element 'process_attr_trackers': This element is not expected.
Error: Session configuration file validation failed
Cause
==============
The error coming from load_session_from_file is not handled correctly.
Solution
========
Rework error handling in load_session_from_path and
load_session_from_file.
LTTNG_ERR_LOAD_SESSION_NOENT is NOT an error when session_name is
specified in load_session_from_path. In this scenario, we are actively
looking for the configuration of the session.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I0fea474045b718664e70ffe169e4e4fa125791a8
Jérémie Galarneau [Thu, 16 Apr 2020 19:20:18 +0000 (15:20 -0400)]
Update version to v2.11.3
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Wed, 1 Apr 2020 22:34:59 +0000 (18:34 -0400)]
Fix: lttng-destroy: missing newline on session destruction message
The lost packets/discarded events statistics are printed on the same
line as the session destruction progress message when the session is
stopped as part of the `destroy` command.
This is a consequence of printing the statistics as they are
retrieved; the statistics must be fetched before the destruction,
but the progress indicator is still being printed.
The statistics output is now formatted to a buffer and printed
after the session's destruction has completed.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I2105056b109774a57c83be3e30984038880c0fb7
Simon Marchi [Wed, 25 Mar 2020 22:39:30 +0000 (18:39 -0400)]
Fix: common: add `void` parameter to log_add_time declaration
It makes it match the definition and fixes this warning:
CC error.lo
/home/smarchi/src/lttng-tools/src/common/error.c:33:13: error: no previous prototype for ‘log_add_time’ [-Werror=missing-prototypes]
const char *log_add_time(void)
^~~~~~~~~~~~
Change-Id: Ibbf5eebd8171504bc7050c754e2a5d113b6b5387
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 23 Mar 2020 23:12:26 +0000 (19:12 -0400)]
Fix: lttng-list: don't warn when the kernel domain has no channels
Some commands beside lttng-enable-channel have the side-effect of
creating a domain. For instance, the lttng-track and lttng-untrack
commands will implicitly create their target domains if they don't
exist. Thus, it is not unexpected for a domain to exist without
channels.
Currently, tracking process attributes in the user space and kernel
domains will result in a warning being printed when lttng-status
(or lttng-list `the_session`) is invoked.
Example output:
Tracing session arielle_bolduc: [inactive]
Trace output: /home/jgalar/lttng-traces/arielle_bolduc-
20200323-191128
=== Domain: Linux kernel ===
Tracked process attributes
Process IDs: all
Virtual Process IDs: 12365, 526, 41
User IDs: all
Virtual User IDs: all
Group IDs: all
Virtual Group IDs: all
Warning: No kernel channel
=== Domain: User space ===
Buffering scheme: per-user
Tracked process attributes
Virtual Process IDs: 12365, 526, 41
Virtual User IDs: all
Virtual Group IDs: all
The warning is removed since it can only confuse users.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I733ee6c3d8c1d297194842c7bdbdf3f237661e51
Jérémie Galarneau [Thu, 5 Mar 2020 21:52:32 +0000 (16:52 -0500)]
Fix: sessiond: occasional badfd error on repeated SIGTERM
The session daemon occasionally prints the following messages
when it received multiple SIGTERM signals:
PERROR - 16:50:18.
505585257 [49845/49845]: write poll pipe: Bad file
descriptor (in notify_thread_pipe() at utils.c:35)
This is caused by a (somewhat inevitable) race between the teardown of
the daemon and the closing of its quit pipe. This happens more often
when kernel modules take a long time to be unloaded and the user
spams ctrl+c in the hope of convincing the daemon process to close
faster since modules are unloaded after closing the quit pipe.
Setting closed pipe fds to '-1' is safe anyway and is already
handled by the notify_thread_pipe() util.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: If08a455c65055dcb56ffbad3703173e6a45cfba5
Jérémie Galarneau [Wed, 4 Mar 2020 23:27:28 +0000 (18:27 -0500)]
Fix: lttng: incorrect domain list printed when no domain is provided
The following commands make use of a common utility function to
validate the count of domains specified and print an error when it
is invalid:
- lttng-enable-event,
- lttng-disable-event,
- lttng-track,
- lttng-untrack,
- lttng-add-context,
- lttng-enable-channel,
- lttng-disable-channel.
Those commands do not allow the same domains to be used. In fact, they
all expect --kernel or --userspace only, except for the
lttng-enable-event, lttng-disable-event, and lttng-add-context
commands which allow the --log4j, --jul, and --python domain options
to be used.
Currently, the error message when no domain is specified is incorrect
for all of those commands. The error reads as follows:
`Error: Please specify a domain (-k/-u/-j).`
For most commands, the -j option cannot be used. For those that allow
agent domains, the message is missing the -l and -p domains.
This ensures that the expected domains are printed for each of those
commands.
Moreover, the message is clarified by using the long form option
names.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I45aee075dbf6c62c4120bdeb06697b88b2d8716c
Francis Deslauriers [Mon, 9 Mar 2020 14:49:51 +0000 (10:49 -0400)]
directory-handle: print `errno` reason on `unlinkat()` error
This is helpful while troubleshooting clear and rotation issues.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I92f9551a49fced7603c8dca832566de71b188528
Jonathan Rajotte [Tue, 3 Mar 2020 20:30:10 +0000 (15:30 -0500)]
Fix: lttng-ctl: _handle can be NULL
lttng_destroy_session_no_wait does not care for the returned handle
and passes a NULL _handle.
This leads to an immediate LTTNG_ERR_INVALID failure on
lttng_destroy_session_no_wait calls.
lttng_destroy_session_ext already performs a null check on _handle
before assigning it to transfer ownership of the handle.
Fixes #1241
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: I9e8bee28382fa2250dee720037efdf77b4e776b8
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 10 Mar 2020 02:06:01 +0000 (22:06 -0400)]
Silence `POSIX Yacc` warnings
Flex/Bison warn that we make use of two non-POSIX directives,
%code and %define. Coincidentally, we don't use POSIX Yacc!
From the bison documentation, "[...] -Wno-yacc will hide the warnings
about POSIX Yacc incompatibilities." [1].
Thus, this flag is added to the YFLAGS.
YACC filter-parser.c
/home/jgalar/EfficiOS/src/lttng-tools/src/lib/lttng-ctl/filter/filter-parser.y:293.1-5:
warning: POSIX Yacc does not support %code [-Wyacc]
293 | %code provides
| ^~~~~
/home/jgalar/EfficiOS/src/lttng-tools/src/lib/lttng-ctl/filter/filter-parser.y:301.1-7:
warning: POSIX Yacc does not support %define [-Wyacc]
301 | %define api.pure
| ^
[1] https://www.gnu.org/software/bison/manual/html_node/Diagnostics.html
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Iaf65534bc47514d3a99b97ce414880a6afc723b9
Jérémie Galarneau [Tue, 18 Feb 2020 01:05:22 +0000 (20:05 -0500)]
Fix: relayd: use of relay_session ref count before initialization
The relay_session's reference count is used before it is initialized
on multiple code paths of session_create(). The initialization of the
reference count, mutexes, and intrusive data structure nodes are
initialized earlier to make their use safe in the event of an error.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I1be53ad88a3e783b85b4c568527df1a75ce58d3a
Jérémie Galarneau [Fri, 14 Feb 2020 22:09:58 +0000 (17:09 -0500)]
Fix: lttng: uninitialized pointer free'd when no sessiond is present
The error path of get_schedules assumes that schedules_comm is !NULL,
which is not the case currently.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I16e2d9d45cd3df9cfa80214abe03bcc782fa1f11
Jérémie Galarneau [Wed, 12 Feb 2020 17:25:23 +0000 (12:25 -0500)]
Update version to v2.11.2
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Id506bae1bbb778096e92af867d0cb5324992c864
Jérémie Galarneau [Fri, 20 Dec 2019 03:13:10 +0000 (22:13 -0500)]
Fix: sessiond: check for lttng-modules ABI 2.1 rather than 2.8
The clear patchset introduces a regression that breaks session
rotations when the kernel domain is used. The 2.8 lttng-modules ABI
does not exist yet.
The packet sequence number functionality was introduced in LTTng 2.8,
which introduced the 2.1 kernel tracer ABI.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ief97e7e25f6f0fcb5b5b97b39abb417c1eb327ec
Francis Deslauriers [Tue, 11 Feb 2020 02:46:34 +0000 (21:46 -0500)]
Tests: Fix: `wait_on_file()` returns too early
Issue
=====
With the current implementation, when calling the `wait_on_file()`
function with the `file_exist` parameter set to false the function will
return even if the target file exists.
In a scenario where we enter the loop and the targer file exist, the
first call to `stat()` will return 0 and will not enter any of the `if`
and break from the loop directly.
Solution
========
If the file exists, only break from the loop if it's the desired exit
condition.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: Ia3e9c41a2a515815d3ff931d8f7c1c14a52b31ae
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Fri, 7 Feb 2020 19:56:50 +0000 (14:56 -0500)]
Fix: Tests: utils.sh: fix unbound variable
When loading `utils.sh`, we test the `LTTNG_TEST_TEARDOWN_TIMEOUT` and
define it to a default value if it's not defined already.
When running bash test scripts with the `-u` option to error out when
encountering unset variables it prints an error and exit
This commit uses a trick found here:
https://stackoverflow.com/questions/
3601515/how-to-check-if-a-variable-is-set-in-bash
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: Id24937f974ffd1ab3250296499da9360f97d393d
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Mon, 10 Feb 2020 22:18:48 +0000 (17:18 -0500)]
Tests: Fix typo: registerd -> registered
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I74f6956d732c41168dfdfa101c6fcad0af6ecebe
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Thu, 6 Feb 2020 15:26:05 +0000 (10:26 -0500)]
Typo: 'toogle' -> 'toggle'
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: Id3c9a1942b21a66b626512e8378c517d48949582
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Tue, 4 Feb 2020 21:04:41 +0000 (16:04 -0500)]
Fix: force the use of our _FORTIFY_SOURCE definition
Some toolset (ubuntu) already defined the _FORTIFY_SOURCE.
This removes the warning we see if this is the case. Unset the variable and
reset it.
The warning:
make[3]: Entering directory '/home/joraj/lttng/master/lttng-tools/tests/regression/kernel'
CC select_poll_epoll-select_poll_epoll.o
<command-line>: warning: "_FORTIFY_SOURCE" redefined
<built-in>: note: this is the location of the previous definition
CCLD select_poll_epoll
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: I2fa0482afa8941705a992f62a2e63657ea9e2b87
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Wed, 5 Feb 2020 22:34:46 +0000 (17:34 -0500)]
Update version to v2.11.1
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I39fb72bfd135b0caa46a2f229d83c5ac99c7e592
Jérémie Galarneau [Mon, 3 Feb 2020 22:33:28 +0000 (17:33 -0500)]
Fix: sessiond: snapshot errors don't clear session's trace chunk
The snapshot record command is implemented by creating and setting
a new trace chunk on the target session, capturing the snapshot, and
closing the session's trace chunk once it is complete.
On some error paths, the session's newly created trace chunk is not
cleared. This means that the session is seen to have a
'current_trace_chunk' on the next attempt to record a snapshot; an
unexpected condition for which an assert() exists.
This results in the following crash:
lttng-sessiond: /home/smarchi/src/lttng-tools/src/bin/lttng-sessiond/cmd.c:4685: snapshot_record: Assertion `!session->current_trace_chunk' failed.
Ensure that the session's current trace chunk is closed and cleared
when an error occurs during the command's execution.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I4f78e3c324bee873349ed5b4d8e189a000458a07
Jérémie Galarneau [Mon, 3 Feb 2020 22:25:58 +0000 (17:25 -0500)]
Fix: sessiond: bounded snapshot record fails when no streams exist
Attempting to record a snapshot with a `--max-size` fails when no
streams exist. For instance, attempting to record a snapshot for a
user space session when no applications are running will fail with the
following output:
Error: Invalid snapshot size. Cannot fit at least one packet per stream.
Error: Snapshot max size is invalid
The function get_session_nb_packets_per_stream() computes an
approximation of the number of packets to capture to honor the maximal
size specified. However, at the end, it doesn't distinguish between
'0' meaning that "no packets can be captured" (no streams exist) and
'0' meaning that "the max size is too small to accomodate one packet".
Those two cases can be distinguished by checking if the 'size_left' is
still the 'max_size', meaning that not even the size of one packet was
substracted from 'max_size'.
Reported-by: Simon Marchi <simark@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I5caef9ce926bbc7143a90667749ffaed972590c1
Simon Marchi [Fri, 31 Jan 2020 19:22:24 +0000 (14:22 -0500)]
session-descriptor: fix comment typos in session-descriptor.h
Change-Id: Idafd16fd2851798a47bd95a7887f5bf9ba7828d0
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Wed, 15 Jan 2020 20:42:31 +0000 (15:42 -0500)]
Fix: include stdlib.h in compat/string.h
Fixes:
CC uuid.lo
In file included from /home/smarchi/src/lttng-tools/src/common/uuid.c:19:0:
/home/smarchi/src/lttng-tools/src/common/compat/string.h: In function ‘lttng_strndup’:
/home/smarchi/src/lttng-tools/src/common/compat/string.h:78:8: error: implicit declaration of function ‘malloc’ [-Werror=implicit-function-declaration]
ret = malloc(navail);
^~~~~~
/home/smarchi/src/lttng-tools/src/common/compat/string.h:78:8: error: incompatible implicit declaration of built-in function ‘malloc’ [-Werror]
/home/smarchi/src/lttng-tools/src/common/compat/string.h:78:8: note: include ‘<stdlib.h>’ or provide a declaration of ‘malloc’
Note that this is in fallback code when the system doesn't provide
strndup (or, in my case, the system provides it but configure failed to
find it).
Change-Id: I5817b0b2436573b7d8fecb2956577a7b183d6296
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Fri, 17 Jan 2020 20:09:21 +0000 (15:09 -0500)]
Fix: lttng: sanity check of `--probe` description
Issue
=====
Run the following command:
lttng enable-event -k --probe "\do_fork" my_do_fork_event
currently fails and that is expected.
But it does not fail for the right reason. In the `parse_probe_opts()`
function, during the last step of parsing the probe description we assume
it's a raw address and pass the string directly to the `strtoul()`
function. So if the probe description is not an address at all (e.g.
"\do_fork"), the `strtoul()` call will return 0 in the `addr` field of
the probe struct. This is then passed to the kernel tracer that asks the
kernel to instrument that address with a kprobe. This fails because 0x0
is not an address that can be instrumented.
Solution
========
Check that the first character of the tentative address is a digit
before trying to convert the string to an integer. This is not perfect
but at least it prevents some errors.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I444f0e7694098b1cdb56ecbf5d92be8974e406dc
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Christophe Bedard [Sat, 18 Jan 2020 19:29:49 +0000 (14:29 -0500)]
Fix: update context types for Python bindings
Fixes: #1214
Signed-off-by: Christophe Bedard <bedard.christophe@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Fri, 17 Jan 2020 17:45:51 +0000 (12:45 -0500)]
Fix: lttng: placing probe on symbol starting with `_`
Issue
=====
The lttng CLI tool does not parse `--probe` symbol name properly if the
name has an underscore at the beginning.
For example, the following command fails
lttng enable-event -k --probe _do_fork my_do_fork_event
This happens because the `parse_probe_opts()` function looks if the
first character of the symbol field is an alphabetic character to
determine if a symbol was provided. The problem is that some kernel
symbols such as `_do_fork` start with an underscore.
Solution
========
check if the first character is an alphabetic character OR an
underscore.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Change-Id: I3ee6c26641ceee508ee78e895d372c6b09fe90fb
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Michael Jeanson [Thu, 16 Jan 2020 19:34:47 +0000 (14:34 -0500)]
Fix: build failure with -fno-common
GCC 10 will default to building with -fno-common, this inhibits the
linker from merging multiple tentative definitions of a symbol in an
archive.
I'm not sure I understand what happen with the symbols in mi-lttng.h
but a similar issue was adressed in:
commit
4965f956f3ef47388fb4a1b2f8f504abfe31afe7
Author: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Date: Fri May 22 12:53:30 2015 -0400
Fix: Mark MI and Config string declarations as extern
This fixes a build issue with GCC 5.1 which would complain about
these symbols being defined multiple times.
Make sure these symbols are extern and defined only in one compile unit.
For more information, see:
https://gcc.gnu.org/gcc-10/porting_to.html
Change-Id: I139c9695371836cb1011f9ce192080b602ed2fbc
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Benjamin Poirier [Mon, 6 Jan 2020 05:19:54 +0000 (14:19 +0900)]
doc: Fix bind address example for lttng-relayd
INADDR_ANY is 0.0.0.0
Fixes: c93eadade277 ("doc/man: use propagated default values in man pages")
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I6e908adca66b829128ea31cf392bccad3f96d63d
Mathieu Desnoyers [Fri, 20 Sep 2019 21:26:08 +0000 (17:26 -0400)]
Test: rotate_utils.sh: consider chunk archive with ust/ as empty
Now the session daemon needs to create the ust/ subdir to pass it
to the consumer daemon even if there are no active traced applications
in per-pid tracing. Therefore, we need to consider a chunk with a
ust/ empty directory as empty.
Empty local traces have this empty subdir, but remote traces do not.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: Ic0cda7baf6eafa5b0c7b4f0b79e03bc8ea523d93
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Thu, 12 Dec 2019 18:09:18 +0000 (13:09 -0500)]
Fix: consumer: do not flush on transition from NULL chunk
When transitioning from NULL chunk, do not flush streams, because
the consumer has nowhere to store the packets generated by this
flush.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: Ic92c035f6b1377849825527d0c9cc05a6b92ac38
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Thu, 12 Dec 2019 18:07:18 +0000 (13:07 -0500)]
Fix: consumer: honor "active" flush flag
Honor "active" flush flag in both kernel and ust consumers. A flush
"active" does a flush which will not generate empty packets (no event),
whereas an "inactive" flush will generate empty packets if flushing
a current packet which has no event.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: Icc9772ba3ae18e96f24354ac6eb9223f343c3458
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Thu, 12 Dec 2019 16:51:40 +0000 (11:51 -0500)]
Fix: sessiond cmd.h: include missing lttng-sessiond.h
lttng-sessiond.h declares struct command_ctx which is used in cmd.h
prototypes.
It typically does not generate a compilation error because all
compile units including cmd.h also include lttng-sessiond.h, but
it is cleaner to include dependencies directly in cmd.h.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: If3106291309cd543a886b2aecda7d4f9d4b290b3
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Mon, 9 Dec 2019 15:41:43 +0000 (10:41 -0500)]
Fix: sessiond: ust-app: per-pid buffers: Create empty ust/ directory
When no applications are running, the toplevel ust/ directory is not
created in a chunk on rotation. Make sure this top level directory
is created.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: Ia272f3182df298302e02b3e096785cb51687b8c9
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Mon, 9 Dec 2019 14:28:13 +0000 (09:28 -0500)]
Fix: utils: utils_stream_file_path separator
Do not add a separator for empty paths.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: Icec7b07d7abab4c010706c8cb4f199229fa04c6f
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Tue, 5 Nov 2019 18:07:44 +0000 (13:07 -0500)]
Fix: consumerd: use packet sequence number for rotation position
Refer to "Fix: relayd: use packet sequence number for rotation position"
for context of this change.
This commit introduces the changes required in the consumerd.
Some notable points related to this commit:
- Internally, the rotate_position (per-stream) is now a 64-bit
value rather than an unsigned long.
- The scheme to rotate a stream is changed to allow using the
backward-compatible lttng_consumer_take_snapshot() rather than
the newer lttng_consumer_get_produced_snapshot(), thus allowing
backward compatibility of the implicit rotation on destroy with
pre-2.10 lttng-modules.
- The rotate position used as pivot point for the rotation is
based on the packet_seq_num of the last packet that has been
send over the network by consumerd, incremented by the number of
packets between the sampled produced_pos and the consumed_pos.
In the worse case scenario where an overwrite mode ring buffer
overwrites its contents enough to trigger a 4GB overflow on a
32-bit producer since the last packet was sent (e.g. due to a
slow network), the difference between produced_pos and
consumed_pos will be lower that what would have been expected.
However, because this pivot position is used as a lower bound,
being smaller than the real value is fine: the data that would
have been misplaced in the wrong trace chunk were actually
overwritten, and will therefore never be consumed.
- When interacting with pre-2.8 lttng-modules, the packet sequence
number is not available. The current approach is to disallow
rotations performed on sessions which have kernel tracing active
with a pre-2.8 lttng-modules.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: I8600cb5e2e9c05f3dfba0499a5fc4a3bb85dec24
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Tue, 5 Nov 2019 23:56:34 +0000 (18:56 -0500)]
align.h: Implement ALIGN_FLOOR macro
Implement the ALIGN_FLOOR macro which aligns the given value to the
previous alignment boundary, or keeps the value as-is if it is already
aligned.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: I36d981e8fb705fafa3ff23ba2d82ec1babe73e45
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Tue, 3 Dec 2019 09:08:36 +0000 (04:08 -0500)]
Fix: relayd: per-pid live: no new metadata vs close
When using lttng-live on a per-pid UST trace, the metadata stream is
closed after an application exits. The live viewer observes that the
stream has no more data when getting the metadata returns 0 bytes.
Internally in the relay daemon, it is assumed that a metadata stream
can be put (and thus removed) as soon as all the metadata has been sent
to the viewer, but this is not quite right. The viewer actually needs to
observe a 0-byte reply after receiving all the metadata in order to
gracefully perceive the metadata stream hang up.
Therefore, add a no_new_metadata_notified flag to the metadata stream
to track whether that 0-byte message has been sent to the viewer since
the last metadata content was sent, and postpone the reclamation of the
metadata stream until it is closed _and_ that 0-byte reply was sent to
the live viewer.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: I0a05332284299d62b832046e4f9d22b6029c3a3e
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Tue, 5 Nov 2019 15:40:58 +0000 (10:40 -0500)]
Fix: relayd: use packet sequence number for rotation position
The "network" sequence number (net_seq_num) is a 64-bit sequence number
tagging each packet sent over the network. The net_seq_num increments
monotonically (+1) for each packet sent from consumer daemon to relay
daemon, on a per-stream basis. It is tagged by the consumer daemon when
sending a trace packet to the relay daemon.
The LTTng kernel and user-space ring buffer "consumed position"
(consumed_pos) and "produced position" (produced_pos) are free-running
counters counting the number of bytes consumed and produced so far by
each stream. Because those counters are updated atomically, they are
limited to a size of 32-bit on 32-bit architectures.
The "packet" sequence number (packet_seq_num) is a sequence number
found in the packet header starting from LTTng 2.8. It is a 64-bit
sequence number assigned by the lttng-modules and lttng-ust ring
buffers. It increments monotonically (+1) for each packet produced
within a given ring buffer (stream).
Using produced_pos as rotation position and comparing it to the
net_seq_num has a few issues:
1) It breaks on 32-bit producers after generating more than 4GB of
data per stream, due to overflow. The net_seq_num is a 64-bit
counter, which does not overflow, but the produced_pos overflows
after 4GB on 32-bit architectures. This can lead to never-completing
rotations.
2) It breaks scenarios where ring buffers are configured in
overwrite mode, and streaming to a relay daemon. Indeed, when
the ring buffer moves the consumed_pos ahead, actually overwriting
data within the ring buffer, it introduces an offset between the
produced_pos and the net_seq_num. Therefore, if producers are
generating a low- (or no-) throughput in some streams, the
rotation may never complete, even on 64-bit architectures.
The solution proposed for this issue is to use the packet_seq_num as
rotation position rather than the net_seq_num. It takes care of
the two problematic scenarios, since the counter is always 64-bit
(even on 32-bit architectures), and because the counter is managed
by the producer, which therefore tracks progress of the ring buffer
overwrites.
This commit introduces changes required at the relayd side. A
separate commit introduces the changes required in the consumerd.
In relayd, one major restriction is the fact that the packet_seq_num
is not sent over the data socket, only through the control socket
receiving the indexes.
Therefore, in order to figure out the pivot position for the data
socket for a given stream, the associated index first needs to be
received. At that point, the corresponding net_seq_num is known,
which provides the pivot position for the data stream. Given that
the data and index sockets provide no ordering guarantees with
respect to their arrival, we handle the fact that data might have
been saved to disk in the wrong (previous) trace chunk by moving
it to the next trace chunk when the pivot position is known.
In order to allow "jumps" in the sequence numbers produced by
overwrite mode buffers, try_rotate_stream_index(), which previously
asserted that each sequence number was received in sequence, now
uses the packet_seq_num pivot position as a lower (inclusive) bound.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: I755329e313f0980655a164b7bdb57e4f3d8e944a
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Wed, 18 Dec 2019 15:56:29 +0000 (10:56 -0500)]
Fix: relayd stream.c: LTTNG_OPTIONAL_GET address confusion
The lack of proper care around use of macro arguments in LTTNG_OPTIONAL_GET
allowed this code to compile, but caused the following issue (manually
replacing "optional" argument with the a
Using LTTNG_OPTIONAL_GET(&stream->ongoing_rotation)->next_trace_chunk
with:
#define LTTNG_OPTIONAL_GET(optional) \
({ \
assert(optional.is_set); \
optional.value; \
})
translates to:
({
assert(&stream->ongoing_rotation.is_set);
&stream->ongoing_rotation.value;
})->next_trace_chunk
The issue here is the assert(), which just checks that the address
is not NULL, when it should actually check that the value is set.
The prior commit fixing optional.h to add proper parentheses to the
macro rightfully fails to compile this code. Fix the erroneous user.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: I0dd45fb60573cae6ae3e831e24266aff4406f57f
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Wed, 18 Dec 2019 15:50:00 +0000 (10:50 -0500)]
Fix: optional.h macro missing parentheses and guards
The are a few coding style issues with optional.h which leads to
unexpected effects when the macros are used in the caller code.
All macro parameters need to be surrounded by () (except when used near
commas, which is the C operator with least precedence).
All macros that emit code need to be surrounded by do { } while (0) so
not to emit extra ; or omit ;, which can cause subtle issues when used
with if/else statements.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Change-Id: Iba6fde7c267f4d8c9ec1a89147045f0bcda3a67a
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Fri, 13 Dec 2019 21:47:57 +0000 (16:47 -0500)]
dynamic-array: fix documentation of lttng_dynamic_pointer_array_get_pointer
The documentation of this function says that mutating the array
invalidates the return pointer. This is not true, since the returned
pointer is the element itself, not a pointer to the array.
Change-Id: I8b8978cddb2d1d6ce0b42ed313e9843ca418c96c
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Fri, 13 Dec 2019 20:25:28 +0000 (15:25 -0500)]
Fix: make dist fails on sdt-probe test with autotools v1.16+
The 'dist' target fails when building with autotools 1.16.1 as the
behaviour of BUILT_SOURCES has changed in 1.16 [1].
BUILT_SOURCES are now built as part of the 'dist' target which causes
it to fail on machines that don't have dtrace installed.
The following error is produced: DTRACE foobar_provider.h /bin/sh: -s:
command not found
The BUILT_SOURCES is skipped for build configurations where the build
of the test helper 'userspace-probe-sdt-binary' is disabled.
The resulting artifact, foobar_provider.h, is not part of the
distributed tarball (marked as nodist), so this doesn't have any
adverse effect.
[1] https://www.mail-archive.com/automake@gnu.org/msg20156.html
Signed-off-by: Michael Jeanson <michael.jeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ibba4689775a8b002e8a959079b1f3c8db9917c5f
Jonathan Rajotte [Wed, 11 Dec 2019 20:58:58 +0000 (15:58 -0500)]
Fix: tests: metadata presence on relayd is not deterministic
There is no synchronization point guaranteeing the presence of metadata on
lttng-relayd side when the live metadata request is done. It must be
present at some point in the future but might not be at the moment we
perform the request.
Add a retry phase to this step. It must succeed in the future.
Not sure how this test was never marked as flaky.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: I033005c6a228013e699c74d8e8faafcb3272dd98
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Tue, 10 Dec 2019 16:15:39 +0000 (11:15 -0500)]
Fix: move testpoint after state update
This prevent failure and hang for the long_regression test suite.
Otherwise the sessiond error out before the test completion due to an
invalid thread state.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: Ie4bf3bea6f84f49f5eceb413ae75a7e6fff08a8f
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Simon Marchi [Fri, 6 Dec 2019 21:07:03 +0000 (16:07 -0500)]
doc: fix typo in lttng-enable-event man page
Change-Id: I81ce8f5d4eb3857ace5b1bc3a3ed3c62751dc503
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 9 Dec 2019 19:31:33 +0000 (14:31 -0500)]
Fix: sessiond: RCU read lock imbalance on get trace chunk id error
The error path when cmd_setup_relayd() fails to get the ID of a trace
chunk causes the RCU read lock to be released even though it was never
acquired.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: I86aeb99e6cd6ba11634283ab7456a3760a0a6b0d
Jonathan Rajotte [Tue, 3 Dec 2019 16:46:24 +0000 (11:46 -0500)]
Fix: build: ust -> kernel mix-up in noinst_SCRIPTS
This is simply a copy paste error as test_notification_ust appears
twice.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Change-Id: I4e170a092338f5a95479a58d48247088d28d3e31
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 3 Dec 2019 09:59:10 +0000 (04:59 -0500)]
Fix: relayd: missing metadata stream causes all traces to be skipped
Commit
123ed7c22 intends for a trace that doesn't have a metadata
stream to be skipped when creating viewer streams. However, the loop
over ctf_traces should be "continued" rather then "broken" from when
this situation arises. Otherwise, all ctf_traces of the session are
skipped, which is not the intention here.
Moreover, a reference to the current ctf_trace is leaked when the
break (now continue) occurs.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Change-Id: Ic630521c6f050c77a78f2c1e20c5741a6b3a66a1
Simon Marchi [Mon, 27 May 2019 15:52:46 +0000 (11:52 -0400)]
configure.ac: Remove duplicated CMD_DESCR_ROTATE definition
CMD_DESCR_ROTATE is defined twice by configure. This breaks configuring
with "-Werror -Wall", as some test programs don't compile due to:
configure:16990: gcc -o conftest -Wall -Werror conftest.c >&5
conftest.c:163: error: "CONFIG_CMD_DESCR_ROTATE" redefined [-Werror]
#define CONFIG_CMD_DESCR_ROTATE "Archive a tracing session’s current trace chunk"
conftest.c:154: note: this is the location of the previous definition
#define CONFIG_CMD_DESCR_ROTATE "Archive a tracing session's current trace chunk"
cc1: all warnings being treated as errors
Signed-off-by: Simon Marchi <simon.marchi@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Sat, 23 Nov 2019 00:04:16 +0000 (19:04 -0500)]
Fix: relayd: fully initialize viewer stream before publishing it
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Francis Deslauriers [Tue, 12 Nov 2019 22:55:25 +0000 (17:55 -0500)]
Fix: relayd: don't send streams if there is no metadata
Issue
=====
When tracing short-live UST apps in per-pid mode, it happens that traces
are closed before we can send all the streams to the viewer. This can
place the viewer in an uncomfortable position where it is aware of data
streams of a trace but can't get the metadata stream to decode the
events.
Solution
========
Only send the data streams if we have the metadata stream or if the
metadata stream was already sent. This ensures that the viewer will
either have all the {data,metadata} streams or none of them.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Mon, 18 Nov 2019 20:12:20 +0000 (15:12 -0500)]
Fix: update apps on untrack only when session is active
This mimics what is done on the track side.
Fixes #1210
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Fri, 22 Nov 2019 20:08:15 +0000 (15:08 -0500)]
Fix: consumerd: assert on null trace chunk on session restart
The consumer daemon asserts on
`stream->net_seq_idx != (uint64_t) 1ULL || stream>trace_chunk'
when a session is re-started following a rotation.
Steps to reproduce, while an instrumented application is running:
$ lttng create
$ lttng enable-event -u -a
$ lttng start
$ lttng stop
$ lttng rotate
$ lttng start
-> assertion fails
The trace chunk of a stream can be null in this scenario as the
"create trace chunk" consumer command immediately sets the streams'
current trace chunk when they are transitioning from a "null" trace
chunk.
Since
1f4962443, a session restart will cause a rotation to occur from
"null" to the streams' new trace chunk. When this rotation occurs, the
channel and their streams are seen to be in the same trace chunk.
This is unexpected as this should only occur when transitioning from a
trace chunk to the "null" trace chunk (no output). In that case, the
streams are considered to have reached the point where they should
discard their current trace chunk to enter the "null trace chunk"
state (having no current output). This is exactly the opposite of
the situation here as streams are transitioning from a null to a
non-null trace chunk.
Hence, the immediate assignation of the trace chunk to the streams
should no longer be performed on creation of a trace chunk on the
consumer daemon. The streams transition from the "null" trace chunk to
a new trace chunk through the "rotate channel" command as is done for
all other rotation operations. Removing this bypass also ensures that
the rotation behaviour of both the consumer and relay daemons match.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Wed, 20 Nov 2019 21:09:50 +0000 (16:09 -0500)]
Fix: sessiond: don't wait for a rotation from a null chunk to finish
The rotation completion checking does not handle waiting for the
completion of a rotation _from_ a NULL trace chunk. This is correct as
there is essentially nothing to check. Streams always rotate out of a
null trace chunk immediately as it means the stream had no output and
could not receive data.
Concretely, this happens when stopping a session, rotating, and
re-starting a session.
The fix consists in simply re-working the logic of the "rotate"
command to not launch a rotation completion check job and not put the
session in the "rotation ongoing" state.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Wed, 20 Nov 2019 21:06:30 +0000 (16:06 -0500)]
Fix: sessiond: duplicated rotation notification sent
A duplicate notification that a rotation was launched and completed
is sent by the rotation thread when a rotation is performed after
a session was stopped.
This code is removed at it is a left-over from the time when the
rotation thread had to explicitly rename trace output folders
when a rotation had completed.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 19 Nov 2019 18:41:51 +0000 (13:41 -0500)]
Fix: relayd: remove assert of non-null stream trace chunk on rotate
A stream can rotate from a "NULL" trace chunk to a new trace chunk
and the relay daemon should not assert on this condition.
This happens when a session is stopped, rotated, and started again
later on.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 18 Nov 2019 21:09:21 +0000 (16:09 -0500)]
Docs: verb/noun confusion in comment
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 18 Nov 2019 21:01:44 +0000 (16:01 -0500)]
Fix: sessiond: no rotation performed from null chunk to new chunk
The session daemon must rotate from a null trace chunk to a new trace
chunk when a session's current trace chunk is null. This situation
happens when a session is stopped, rotated, and started again.
This bug leaves existing streams in the "null" trace chunk and causes
the relay daemon to report a protocol error on the reception of the
first data packet following such a start.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 18 Nov 2019 19:43:06 +0000 (14:43 -0500)]
Fix: invalid use of destructor in dynamic pointer array
A dynamic pointer array is built on top of a dynamic array and uses
the dynamic array's internal "destructor" field to store the
user-specified destructor.
lttng_dynamic_pointer_array_remove_pointer currently uses
the dynamic array's remove_element directly which causes the
user destructor to be called with the underlying storage of the
pointer rather than with the pointer itself.
This change re-uses the same pattern as
lttng_dynamic_pointer_array_reset(), namely using the destructor
explicitly and setting it to NULL for the duration of the call to
the dynamic array API.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Fri, 15 Nov 2019 22:16:32 +0000 (17:16 -0500)]
Fix: relayd: check for a trace chunk before writing a packet
Protocol errors can cause a packet to be written to a stream that
doesn't have an active trace chunk. Validate this condition for the
init and write packet operations on a stream.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Thu, 14 Nov 2019 22:12:08 +0000 (17:12 -0500)]
Fix: relayd: viewer session trace chunk not released on detach
The 'attach' command on a viewer session expects (asserts) the trace
chunk of the viewer session to be NULL. This is reasonable as there is
no reason to hold a reference to a trace chunk while no clients are
attached.
Release the reference to the trace chunk on detach. The relay
session's trace chunk will be re-sampled (copied) when the next client
attaches to the viewer session.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Michael Jeanson [Thu, 7 Nov 2019 19:02:55 +0000 (14:02 -0500)]
Require automake >= 1.12
The test suite LOG_DRIVER statement requires that automake >= 1.12 be used
during bootstrap.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 12 Nov 2019 04:38:25 +0000 (23:38 -0500)]
Fix: relayd: session trace chunk is copied too late
In per-pid buffering mode, a viewer can attach to a session while it
is active and find it has been closed by the time it requests new
streams. The viewer session's trace chunk is created as a side-effect
of the "get_new_streams" command and can find that the relay_session's
trace chunk has now been closed, causing the creation of the viewer
session trace chunk to fail.
This results in an unexpected error being reported to the live client.
This fix moves the creation of the viewer session's trace chunk to the
"attach" command. If the creation fails, the session is reported as
being "unknown".
Reported-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Tested-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Jérémie Galarneau [Fri, 8 Nov 2019 22:45:20 +0000 (17:45 -0500)]
Fix: relayd: disallow 0-length session names for 2.4+ peers
The group-by-session-name feature assumes sessions are named for peers
more recent than 2.3. Enforce this assumption at session creation
time.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Fri, 1 Nov 2019 20:23:05 +0000 (16:23 -0400)]
Fix: sessiond: ust: deadlock with per-pid buffers
Do not hold the registry lock while communicating with the consumerd,
because doing so causes inter-process deadlocks between consumerd and
sessiond with the metadata request notification.
The deadlock involves both sessiond and consumerd:
* lttng-sessiond:
thread 11 - thread_application_management
close_metadata()
pthread_mutex_lock(®istry->lock);
consumer_close_metadata()
pthread_mutex_lock(socket->lock);
thread 15 - thread_consumer_management
ust_consumer_metadata_request()
pthread_mutex_lock(&ust_reg->lock);
thread 8 - thread_manage_clients
consumer_is_data_pending
pthread_mutex_lock(socket->lock);
consumer_socket_recv()
* lttng-consumerd:
thread 4 - consumer_timer_thread
sample_channel_positions()
pthread_mutex_lock(&stream->lock);
thread 8 - consumer_thread_sessiond_poll
consumer_data_pending
pthread_mutex_lock(&consumer_data.lock);
pthread_mutex_lock(&stream->lock);
thread 7 - consumer_thread_data_poll
lttng_consumer_read_subbuffer
pthread_mutex_lock(&stream->chan->lock);
pthread_mutex_lock(&stream->lock);
do_sync_metadata
pthread_mutex_lock(&metadata->lock);
lttng_ustconsumer_sync_metadata
pthread_mutex_unlock(&metadata_stream->lock);
lttng_ustconsumer_request_metadata()
pthread_mutex_lock(&ctx->metadata_socket_lock);
lttcomm_recv_unix_sock()
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Wed, 6 Nov 2019 19:43:18 +0000 (14:43 -0500)]
relayd: close viewer stream trace chunk earlier on release
A viewer stream puts its references to its stream and index files
within its "release" method (called when its reference count reaches
0).
However, the reference to its trace chunk is only released during the
RCU reclamation of the viewer stream. This unnecessarily delays the
clean-up of the viewer trace chunk.
For cleanliness' sake, move the release of the viewer stream's trace
chunk to the release method, just after the release of the various
file handles of that stream.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Fri, 1 Nov 2019 20:23:04 +0000 (16:23 -0400)]
Fix: relayd: put chunk reference when closing stream
If a stream is closed by an application exiting (per-pid buffers), it
needs to put its reference on the stream trace chunk right away, because
otherwise still holding the reference on the trace chunk could allow a
viewer stream (which holds a reference to the stream) to postpone
destroy waiting for the chunk to cease to exist endlessly until the
viewer is detached.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Mathieu Desnoyers [Fri, 1 Nov 2019 20:23:03 +0000 (16:23 -0400)]
Fix: relayd: tracefile rotation: viewer opening missing index file
Moving the head position of the tracefile array when the data is
received opens a window where a viewer attaching to the session could
try to open a missing index file (which has not been received yet).
However, we want to bump the tail position as soon as we receive
data, because the prior tail is not valid anymore.
Solve this by introducing two head positions: the "read" head
and the "write" head. The "write" head is the position of the
newest data file (equivalent to the prior "head" position). We
also introduce a "read" head position, which is only moved
forward when the index is received.
The viewer now uses the "read" head position as upper bound, which
ensures it never attempts to open a non-existing index file.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Fri, 25 Oct 2019 22:12:04 +0000 (18:12 -0400)]
Tests: fix shellcheck warning
No need to use random string for session name here, use the test name.
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Fri, 25 Oct 2019 22:12:03 +0000 (18:12 -0400)]
Tests: base path: lttng load for session configuration
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Fri, 25 Oct 2019 22:12:02 +0000 (18:12 -0400)]
Cleanup: remove unused internal lttng_session_descriptor_get_base_path
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Fri, 25 Oct 2019 22:12:01 +0000 (18:12 -0400)]
Refactor: Move set session path to own function
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Fri, 25 Oct 2019 22:12:00 +0000 (18:12 -0400)]
Fix: move set base_path of session to URI configuration
The load code still uses the "old" API to create and configure network
session output (lttng_create_session followed by
lttng_set_consumer_url). The session base_path is only set in the
cmd_create_session_from_descriptor function. This results in invalid
network output paths when using a loaded session configuration (xml).
While we might want to move the load code to the new API, there is a
case to be made in not breaking the previous API behaviour.
To restore the expected behaviour of lttng_set_consumer_url, move the
assignation of the session base_path to the cmd_set_consumer_uri
function (LTTNG_SET_CONSUMER_URI).
Both the previous and session descriptor based creation API uses this
code path when needed (network output).
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jonathan Rajotte [Fri, 25 Oct 2019 21:56:26 +0000 (17:56 -0400)]
Fix: lttng: initialize sessions pointer to NULL
lttng_list_sessions does not set the passed pointer to NULL on empty
return. This leads to a deallocation of an invalid pointer (segfault).
For returns of size 0, the value of the passed argument should be
considered "undefined".
Refactor error handling a bit by removing the "error" jump. Always
call free on the 'sessions' object.
Fixes #1205
Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Michael Jeanson [Thu, 31 Oct 2019 20:12:46 +0000 (16:12 -0400)]
Fix: check for dtrace and sdt.h before enabling SDT uprobe tests
Add a configure switch '--enable-sdt-uprobe / --disable-sdt-uprobe', the
default behavior of enabling the test if the requirements are found is
kept but it's now possible to explicitly disable it.
Also add the detection of the dtrace binary and its override trough the
DTRACE environment variable.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Wed, 30 Oct 2019 19:35:28 +0000 (15:35 -0400)]
Fix: consumerd: crash occurs when taking snapshot of ust channel
Commit
8e1ef46e8 added an acquisition of the metadata_stream's lock
during consumer_metadata_cache_flushed() as stream attributes are
used. However, when this function is called, the metadata channel's
stream can already be NULL, as indicated by the function's comments.
Check if the stream is NULL before attempting to acquire its lock.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 29 Oct 2019 19:57:59 +0000 (15:57 -0400)]
Fix: trace-chunk: log the cause of file open failures
Use the PERROR macro instead of ERR to obtain the "errno" message
when an error occurs while opening a file relative to a trace
chunk.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 29 Oct 2019 03:57:01 +0000 (23:57 -0400)]
Fix: relayd: live: crash when creating viewer streams
Viewer streams can be creating while serving a "GET_STREAMS" viewer
client command for a session that is being destroyed. If this happens,
the viewer streams will be created with a NULL viewer trace chunk,
which would result in a crash.
The fix consists in returning a stream error when such a command
happens during the destruction of a session. This is the same
behaviour than if the session could not be found at all, introducing
no meaningful change in behaviour from the viewer's perspective.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 29 Oct 2019 03:32:36 +0000 (23:32 -0400)]
Fix: relayd: live: crash on attach to a session without trace chunk
Attaching to a session that doesn't have a current trace chunk results
in a crash when the viewer streams are created from a NULL viewer
trace chunk.
Live clients are prevented from attaching to sessions without a
current trace chunk as those sessions are either being destroyed or
too young to have a trace chunk, meaning that they don't have streams
yet. Live clients will receive the "unknown" status code that they
already receive when asking an unknown session. Since such sessions
are not listed, this shouldn't change any exposed behaviour.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Tue, 29 Oct 2019 03:29:53 +0000 (23:29 -0400)]
Fix: relayd: live: some listed sessions are not attacheable
The list sessions command currently returns sessions that do not
have a current trace chunk. This can be caused by the session
either being destroyed or being so young that it hasn't had a
trace chunk created against it yet.
In both cases, such sessions would not be attacheable in their
current condition. This fix omits them from from the listing
to reduce the number of failures at the "attach session" and
"attach stream" step.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 28 Oct 2019 20:53:48 +0000 (16:53 -0400)]
Fix: relayd: don't put un-acquired trace chunk reference
stream_create() should not release (put) the reference to the current
trace chunk in its error path if it could not acquire a new reference
in the first place.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 28 Oct 2019 20:26:48 +0000 (16:26 -0400)]
Fix: relayd: don't put un-acquired viewer trace chunk reference
viewer_stream_create() should not release (put) the reference to
the viewer_trace_chunk in its error path if it could not acquire
a new reference in the first place.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 28 Oct 2019 19:37:34 +0000 (15:37 -0400)]
Fix: consumerd: NULL pointer dereference during metadata sync
The following crash was reported when short-lived applications
are traced in a live session with per-pid buffering channels.
From the original report:
```
Thread 1 (Thread 0x7f72b67fc700 (LWP
1912155)):
#0 0x00005650b3f6ccbd in commit_one_metadata_packet (stream=0x7f729c010bf0) at ust-consumer.c:2537
#1 0x00005650b3f6cf58 in lttng_ustconsumer_sync_metadata (ctx=0x5650b588ce60, metadata=0x7f729c010bf0) at ust-consumer.c:2608
#2 0x00005650b3f4dba3 in do_sync_metadata (metadata=0x7f729c010bf0, ctx=0x5650b588ce60) at consumer-stream.c:471
#3 0x00005650b3f4dd3c in consumer_stream_sync_metadata (ctx=0x5650b588ce60, session_id=0) at consumer-stream.c:548
#4 0x00005650b3f6de78 in lttng_ustconsumer_read_subbuffer (stream=0x7f729c0058e0, ctx=0x5650b588ce60) at ust-consumer.c:2917
#5 0x00005650b3f45196 in lttng_consumer_read_subbuffer (stream=0x7f729c0058e0, ctx=0x5650b588ce60) at consumer.c:3524
#6 0x00005650b3f42da7 in consumer_thread_data_poll (data=0x5650b588ce60) at consumer.c:2894
#7 0x00007f72bdc476db in start_thread (arg=0x7f72b67fc700) at pthread_create.c:463
#8 0x00007f72bd97088f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
The segfault happen on the access to 'stream->chan->metadata_cache->lock'
chan value here is zero.
```
The problem is easily reproducible if a sleep(1) is added just after
the call to lttng_ustconsumer_request_metadata(), before the metadata
stream lock is re-acquired.
During the execution of the "request_metadata", an application can
close. This will cause the session daemon to push any remaining
metadata to the consumer daemon and to close the metadata channel.
Closing the metadata channel closes the metadata stream's wait_fd,
which is an internal pipe. The closure of the metadata pipe is
detected by the metadata_poll thread, which will ensure that all
metadata has been consumed before issuing the deletion of the metadata
stream and channel.
During the deletion, the channel's "stream" attribute the stream's
"chan" attribute are set to NULL as both are logically deleted and
should not longer be used.
Meanwhile, the thread executing commit_one_metadata_packet()
re-acquires the metadata stream lock and trips on the now-NULL "chan"
member.
The fix consists in checking if the metadata stream is logically
deleted after its lock is re-acquired. It is correct for the
sync_metadata operation to then complete successfully as the metadata
is synced: the metadata guarantees this before deleting the
stream/channel.
Since the metadata stream's lifetime is protected by its lock, there
may be other sites that need such a check. The lock and deletion check
could be combined into a single consumer_stream_lock() helper in
follow-up fixes.
Reported-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Mon, 28 Oct 2019 18:52:44 +0000 (14:52 -0400)]
consumerd: clean-up: stream attribute accessed without locking stream
consumer_metadata_cache_flushed makes use of the metadata stream's
ust_metadata_pushed attribute without locking while it is updated by
commit_one_metadata_packet() which holds the metadata stream lock.
This is marked as a clean-up since the attribute appears to always be
accessed while the metadata cache lock is held. However this is a
_channel_ attribute and the stream and channel lifetimes do not match,
making the locking assumptions conceptually dubious.
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Michael Jeanson [Wed, 23 Oct 2019 15:08:34 +0000 (11:08 -0400)]
Fix: check for lttng-ust >= 2.11 at configure
We don't support building lttng-tools against an older version of
lttng-ust, make this check explicitly at configure.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Michael Jeanson [Fri, 18 Oct 2019 21:40:06 +0000 (17:40 -0400)]
Typo: occured -> occurred
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Michael Jeanson [Fri, 18 Oct 2019 21:12:22 +0000 (17:12 -0400)]
Fix typo 'Attemp' -> 'Attempt'
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Jérémie Galarneau [Fri, 18 Oct 2019 20:39:00 +0000 (16:39 -0400)]
Fix: sessiond: use system LTTng-UST headers when available
The LTTng-Tools tree includes a local copy of three LTTng-UST headers:
* ust-error.h
* ust-ctl.h
* ust-abi.h
The system headers should be used when UST support is configured to
ensure the appropriate ABI definitions are used. The local copies of
the headers should only be used when LTTng-Tools is built with the
--without-lttng-ust configuration option. Those headers are needed
since some UST support code is compiled-in even though the support
is deactivated.
A misconfiguration in the CI setup allowed us to notice that
sessiond-config.c is using the internal header unconditionally.
To ensure this doesn't happen in the future, the local copies
are renamed:
* ust-error.h -> ust-error-internal.h
* ust-ctl.h -> ust-ctl-internal.h
* ust-abi.h -> ust-abi-internal.h
All code should use the `lttng-` prefixed versions of the headers
which include either the local or "system" copy of the headers
depending on the build configuration.
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Fri, 18 Oct 2019 19:53:05 +0000 (15:53 -0400)]
doc/man: use specific revision date for each manual page
This patch makes each manual page indicate its own revision date with
the `revdate` AsciiDoc attribute.
In `asciidoc.conf`, we use this attribute to specify the DocBook
reference page date (see
<https://tdg.docbook.org/tdg/4.5/refentryinfo.html> and
<https://tdg.docbook.org/tdg/4.5/date.html>).
Without the DocBook date tag, `xmlto` uses the current date. You can
see this date at the bottom of the rendered manual page:
...
SEE ALSO
lttng-enable-rotation(1), lttng-disable-rotation(1), lttng(1)
LTTng 2.12.0-pre 10/18/2019 LTTNG-ROTATE(1)
Using the manual page generation date seems unexpected for the reader
here.
For this initial change, I used the last commit date for each source
file.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Philippe Proulx [Fri, 18 Oct 2019 19:29:31 +0000 (15:29 -0400)]
lttng-rotate.1.txt: update voice and document the `archives` subdir.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
This page took 0.053633 seconds and 4 git commands to generate.