-#!/bin/bash -exu
+#!/bin/bash
#
-# Copyright (C) 2015 - Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>
-# 2016 - Michael Jeanson <mjeanson@efficios.com>
+# Copyright (C) 2015 Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>
+# Copyright (C) 2016-2020 Michael Jeanson <mjeanson@efficios.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
+set -exu
+
# Version compare functions
vercomp () {
set +u
[ "$res" -ne "0" ]
}
-# Required parameters
+failed_configure() {
+ # Assume we are in the configured build directory
+ echo "#################### BEGIN config.log ####################"
+ cat config.log
+ echo "#################### END config.log ####################"
+
+ # End the build with failure
+ exit 1
+}
+
+# Required variables
+WORKSPACE=${WORKSPACE:-}
+
arch=${arch:-}
conf=${conf:-}
build=${build:-}
+cc=${cc:-}
+# Controls if the tests are run
+USERSPACE_RCU_RUN_TESTS="${USERSPACE_RCU_RUN_TESTS:=yes}"
SRCDIR="$WORKSPACE/src/liburcu"
TMPDIR="$WORKSPACE/tmp"
-PREFIX="$WORKSPACE/build"
+PREFIX="/build"
-# Create build and tmp directories
-rm -rf "$PREFIX" "$TMPDIR"
-mkdir -p "$PREFIX" "$TMPDIR"
+# Create tmp directory
+rm -rf "$TMPDIR"
+mkdir -p "$TMPDIR"
export TMPDIR
+export CFLAGS="-g -O2"
+
+# Set compiler variables
+case "$cc" in
+gcc)
+ export CC=gcc
+ export CXX=g++
+ ;;
+gcc-4.8)
+ export CC=gcc-4.8
+ export CXX=g++-4.8
+ ;;
+gcc-5)
+ export CC=gcc-5
+ export CXX=g++-5
+ ;;
+gcc-6)
+ export CC=gcc-6
+ export CXX=g++-6
+ ;;
+gcc-7)
+ export CC=gcc-7
+ export CXX=g++-7
+ ;;
+gcc-8)
+ export CC=gcc-8
+ export CXX=g++-8
+ ;;
+clang)
+ export CC=clang
+ export CXX=clang++
+ ;;
+clang-3.9)
+ export CC=clang-3.9
+ export CXX=clang++-3.9
+ ;;
+clang-4.0)
+ export CC=clang-4.0
+ export CXX=clang++-4.0
+ ;;
+clang-5.0)
+ export CC=clang-5.0
+ export CXX=clang++-5.0
+ ;;
+clang-6.0)
+ export CC=clang-6.0
+ export CXX=clang++-6.0
+ ;;
+clang-7)
+ export CC=clang-7
+ export CXX=clang++-7
+ ;;
+*)
+ if [ "x$cc" != "x" ]; then
+ export CC="$cc"
+ fi
+ ;;
+esac
+
+if [ "x${CC:-}" != "x" ]; then
+ echo "Selected compiler:"
+ "$CC" -v
+fi
# Set platform variables
case "$arch" in
-solaris10)
- MAKE=gmake
- TAR=gtar
- NPROC=gnproc
- CFLAGS="-D_XOPEN_SOURCE=1 -D_XOPEN_SOURCE_EXTENDED=1 -D__EXTENSIONS__=1"
- ;;
-
-solaris11)
- MAKE=gmake
- TAR=gtar
- NPROC=nproc
- CFLAGS="-D_XOPEN_SOURCE=1 -D_XOPEN_SOURCE_EXTENDED=1 -D__EXTENSIONS__=1"
- export PATH="$PATH:/usr/perl5/bin"
- ;;
-
-macosx)
- MAKE=make
- TAR=tar
- NPROC="getconf _NPROCESSORS_ONLN"
- BISON="bison"
- YACC="$BISON -y"
- export PATH="/opt/local/bin:/opt/local/sbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin"
- export CFLAGS="-I/opt/local/include"
- export LDFLAGS="-L/opt/local/lib"
+sol10-i386)
+ export MAKE=gmake
+ export TAR=gtar
+ export NPROC=gnproc
+ export PATH="/opt/csw/bin:/usr/ccs/bin:$PATH"
+ export CPPFLAGS="-I/opt/csw/include"
+ export LDFLAGS="-L/opt/csw/lib -R/opt/csw/lib"
+ export PKG_CONFIG_PATH="/opt/csw/lib/pkgconfig"
+ export PYTHON="python3"
+ export PYTHON_CONFIG="python3-config"
;;
-*)
- MAKE=make
- TAR=tar
- NPROC=nproc
- CFLAGS=""
+sol11-i386)
+ export MAKE=gmake
+ export TAR=gtar
+ export NPROC=nproc
+ export PATH="/opt/csw/bin:$PATH:/usr/perl5/bin"
+ export LD_ALTEXEC=/usr/bin/gld
+ export LD=/usr/bin/gld
+ export PYTHON="python3"
+ export PYTHON_CONFIG="python3-config"
+ export PKG_CONFIG_PATH="/usr/lib/pkgconfig"
;;
-esac
-# Set configure options for each build configuration
-CONF_OPTS=""
-case "$conf" in
-static)
- echo "Static build"
- CONF_OPTS="--enable-static --disable-shared"
+macos*)
+ export MAKE=make
+ export TAR=tar
+ export NPROC="getconf _NPROCESSORS_ONLN"
+ export PATH="/opt/local/bin:/opt/local/sbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin"
+ export CPPFLAGS="-I/opt/local/include"
+ export LDFLAGS="-L/opt/local/lib"
+ export PYTHON="python3.9"
+ export PYTHON_CONFIG="python3.9-config"
;;
-tls_fallback)
- echo "Using pthread_getspecific() to emulate TLS"
- CONF_OPTS="--disable-compiler-tls"
+freebsd)
+ export MAKE=gmake
+ export TAR=tar
+ export NPROC="getconf _NPROCESSORS_ONLN"
+ export CPPFLAGS="-I/usr/local/include"
+ export LDFLAGS="-L/usr/local/lib"
+ export PYTHON="python3"
+ export PYTHON_CONFIG="python3-config"
;;
*)
- echo "Standard build"
- CONF_OPTS=""
+ export MAKE=make
+ export TAR=tar
+ export NPROC=nproc
+ export PYTHON="python3"
+ export PYTHON_CONFIG="python3-config"
;;
esac
+# Print build env details
+print_os || true
+print_tooling || true
# Enter the source directory
cd "$SRCDIR"
# Get source version from configure script
eval "$(grep '^PACKAGE_VERSION=' ./configure)"
+PACKAGE_VERSION=${PACKAGE_VERSION//\-pre*/}
+
+# Set configure options and environment variables for each build
+# configuration.
+CONF_OPTS=("--prefix=$PREFIX")
+case "$conf" in
+static)
+ echo "Static lib only configuration"
+
+ CONF_OPTS+=("--enable-static" "--disable-shared")
+ ;;
+
+tls_fallback)
+ echo "Using pthread_getspecific() to emulate TLS"
+ CONF_OPTS+=("--disable-compiler-tls")
+ ;;
+
+debug-rcu)
+ echo "Enable RCU sanity checks for debugging"
+ if vergte "$PACKAGE_VERSION" "0.10"; then
+ CONF_OPTS+=("--enable-rcu-debug")
+ else
+ export CFLAGS="$CFLAGS -DDEBUG_RCU"
+ fi
+ echo "Enable iterator sanity validator"
+ if vergte "$PACKAGE_VERSION" "0.11"; then
+ CONF_OPTS+=("--enable-cds-lfht-iter-debug")
+ fi
+ ;;
+
+*)
+ echo "Standard configuration"
+ ;;
+esac
# Build type
-# oot : out-of-tree build
-# dist: build via make dist
-# * : normal tree build
+# oot : out-of-tree build
+# dist : build via make dist
+# oot-dist: build via make dist out-of-tree
+# * : normal tree build
#
-# Make sure to move to the build_path and configure
-# before continuing
-BUILD_PATH=$SRCDIR
+# Make sure to move to the build directory and run configure
+# before continuing.
case "$build" in
oot)
echo "Out of tree build"
- BUILD_PATH=$WORKSPACE/oot
- mkdir -p "$BUILD_PATH"
- cd "$BUILD_PATH"
- MAKE=$MAKE CFLAGS="$CFLAGS" "$SRCDIR/configure" --prefix="$PREFIX" $CONF_OPTS
+
+ # Create and enter a temporary build directory
+ builddir=$(mktemp -d)
+ cd "$builddir"
+
+ "$SRCDIR/configure" "${CONF_OPTS[@]}" || failed_configure
;;
dist)
+ echo "Distribution in-tree build"
+
+ # Run configure and generate the tar file
+ # in the source directory
+ ./configure || failed_configure
+ $MAKE dist
+
+ # Create and enter a temporary build directory
+ builddir=$(mktemp -d)
+ cd "$builddir"
+
+ # Extract the distribution tar in the build directory,
+ # ignore the first directory level
+ $TAR xvf "$SRCDIR"/*.tar.* --strip 1
+
+ # Build in extracted source tree
+ ./configure "${CONF_OPTS[@]}" || failed_configure
+ ;;
+
+oot-dist)
echo "Distribution out of tree build"
- BUILD_PATH=$(mktemp -d)
- # Initial configure and generate tarball
- MAKE=$MAKE "$SRCDIR/configure"
+ # Create and enter a temporary build directory
+ builddir=$(mktemp -d)
+ cd "$builddir"
+
+ # Run configure out of tree and generate the tar file
+ "$SRCDIR/configure" || failed_configure
$MAKE dist
- mkdir -p "$BUILD_PATH"
- cp ./*.tar.* "$BUILD_PATH/"
- cd "$BUILD_PATH"
+ dist_srcdir="$(mktemp -d)"
+ cd "$dist_srcdir"
+
+ # Extract the distribution tar in the new source directory,
+ # ignore the first directory level
+ $TAR xvf "$builddir"/*.tar.* --strip 1
- # Ignore level 1 of tar
- $TAR xvf ./*.tar.* --strip 1
+ # Create and enter a second temporary build directory
+ builddir="$(mktemp -d)"
+ cd "$builddir"
- MAKE=$MAKE CFLAGS="$CFLAGS" "$BUILD_PATH/configure" --prefix="$PREFIX" $CONF_OPTS
+ # Run configure from the extracted distribution tar,
+ # out of the source tree
+ "$dist_srcdir/configure" "${CONF_OPTS[@]}" || failed_configure
;;
+
*)
echo "Standard in-tree build"
- MAKE=$MAKE CFLAGS="$CFLAGS" "$BUILD_PATH/configure" --prefix="$PREFIX" $CONF_OPTS
+ ./configure "${CONF_OPTS[@]}" || failed_configure
;;
esac
+# We are now inside a configured build directory
+
# BUILD!
$MAKE -j "$($NPROC)" V=1
-$MAKE install
-# Run tests
-$MAKE check
-# Only run regtest for 0.9 and up
-if vergte "$PACKAGE_VERSION" "0.9"; then
- $MAKE regtest
+# Install in the workspace
+$MAKE install DESTDIR="$WORKSPACE"
+
+# Run tests, don't fail now, we want to run the archiving steps
+failed_tests=0
+if [ "$USERSPACE_RCU_RUN_TESTS" = "yes" ]; then
+ $MAKE --keep-going check || failed_tests=1
+ # Only run regtest for 0.9 and up
+ if vergte "$PACKAGE_VERSION" "0.9"; then
+ $MAKE --keep-going regtest || failed_tests=1
+ fi
+
+ # Copy tap logs for the jenkins tap parser before cleaning the build dir
+ rsync -a --exclude 'test-suite.log' --include '*/' --include '*.log' --exclude='*' tests/ "$WORKSPACE/tap"
+
+ # The test suite prior to 0.11 did not produce TAP logs
+ if verlt "$PACKAGE_VERSION" "0.11"; then
+ mkdir -p "$WORKSPACE/tap/no-log"
+ echo "1..1" > "$WORKSPACE/tap/no-log/tests.log"
+ echo "ok 1 - Test suite doesn't support logging" >> "$WORKSPACE/tap/no-log/tests.log"
+ fi
fi
-# Cleanup
+# Clean the build directory
$MAKE clean
# Cleanup rpath in executables and shared libraries
-#find $WORKSPACE/build/bin -type f -perm -0500 -exec chrpath --delete {} \;
-find "$PREFIX/lib" -name "*.so" -exec chrpath --delete {} \;
+#find "$WORKSPACE/$PREFIX/bin" -type f -perm -0500 -exec chrpath --delete {} \;
+find "$WORKSPACE/$PREFIX/lib" -name "*.so" -exec chrpath --delete {} \;
# Remove libtool .la files
-find "$PREFIX/lib" -name "*.la" -exec rm -f {} \;
+find "$WORKSPACE/$PREFIX/lib" -name "*.la" -exec rm -f {} \;
-# Cleanup temp directory of dist build
-if [ "$build" = "dist" ]; then
- cd "$SRCDIR"
- rm -rf "$BUILD_PATH"
-fi
+# Exit with failure if any of the tests failed
+exit $failed_tests
# EOF