#!/bin/bash
#
-# Copyright (C) 2015 Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>
-# Copyright (C) 2019-2020 Michael Jeanson <mjeanson@efficios.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# SPDX-FileCopyrightText: 2015 Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>
+# SPDX-FileCopyrightText: 2016-2023 Michael Jeanson <mjeanson@efficios.com>
+# SPDX-License-Identifier: GPL-2.0-or-later
set -exu
return 0
fi
local IFS=.
+ # Ignore the shellcheck warning, we want splitting to happen based on IFS.
+ # shellcheck disable=SC2206
local i ver1=($1) ver2=($2)
# fill empty fields in ver1 with zeros
for ((i=${#ver1[@]}; i<${#ver2[@]}; i++)); do
[ "$res" -ne "0" ]
}
+print_header() {
+ set +x
+
+ local message=" $1 "
+ local message_len
+ local padding_len
+
+ message_len="${#message}"
+ padding_len=$(( (80 - (message_len)) / 2 ))
+
+ printf '\n'; printf -- '#%.0s' {1..80}; printf '\n'
+ printf -- '-%.0s' {1..80}; printf '\n'
+ printf -- '#%.0s' $(seq 1 $padding_len); printf '%s' "$message"; printf -- '#%.0s' $(seq 1 $padding_len); printf '\n'
+ printf -- '-%.0s' {1..80}; printf '\n'
+ printf -- '#%.0s' {1..80}; printf '\n\n'
+
+ set -x
+}
+
failed_configure() {
# Assume we are in the configured build directory
- echo "#################### BEGIN config.log ####################"
+ print_header "BEGIN config.log"
cat config.log
- echo "#################### END config.log ####################"
+ print_header "END config.log"
# End the build with failure
exit 1
}
+print_header "Librseq build script starting"
+
# Required variables
WORKSPACE=${WORKSPACE:-}
+# Axis
platform=${platform:-}
conf=${conf:-}
build=${build:-}
cc=${cc:-}
+# Build steps that can be overriden by the environment
+LIBRSEQ_MAKE_INSTALL="${LIBRSEQ_MAKE_INSTALL:-yes}"
+LIBRSEQ_MAKE_CLEAN="${LIBRSEQ_MAKE_CLEAN:-yes}"
+LIBRSEQ_GEN_COMPILE_COMMANDS="${LIBRSEQ_GEN_COMPILE_COMMANDS:-no}"
+LIBRSEQ_RUN_TESTS="${LIBRSEQ_RUN_TESTS:-yes}"
SRCDIR="$WORKSPACE/src/librseq"
TMPDIR="$WORKSPACE/tmp"
PREFIX="/build"
+LIBDIR="lib"
+LIBDIR_ARCH="$LIBDIR"
+
+# RHEL and SLES both use lib64 but don't bother shipping a default autoconf
+# site config that matches this.
+if [[ ( -f /etc/redhat-release || -f /etc/products.d/SLES.prod || -f /etc/yocto-release ) ]]; then
+ # Detect the userspace bitness in a distro agnostic way
+ if file -L /bin/bash | grep '64-bit' >/dev/null 2>&1; then
+ LIBDIR_ARCH="${LIBDIR}64"
+ fi
+fi
+
+exit_status=0
+
+# Use bear to generate compile_commands.json when enabled
+BEAR=""
+if [ "$LIBRSEQ_GEN_COMPILE_COMMANDS" = "yes" ]; then
+ BEAR="bear"
+fi
# Create tmp directory
rm -rf "$TMPDIR"
export TMPDIR
export CFLAGS="-g -O2"
+export CXXFLAGS="-g -O2"
# Add the convenience headers in extra to the
# include path.
;;
esac
-if [ "x${CC:-}" != "x" ]; then
- echo "Selected compiler:"
- "$CC" -v
-fi
-
# Set platform variables
case "$platform" in
*)
esac
# Print build env details
+print_header "Build environment details"
+print_hardware || true
print_os || true
print_tooling || true
cd "$SRCDIR"
# Run bootstrap in the source directory prior to configure
+print_header "Bootstrap autotools"
./bootstrap
# Get source version from configure script
eval "$(grep '^PACKAGE_VERSION=' ./configure)"
PACKAGE_VERSION=${PACKAGE_VERSION//\-pre*/}
-
# Set configure options and environment variables for each build
# configuration.
-CONF_OPTS=("--prefix=$PREFIX")
+CONF_OPTS=("--prefix=$PREFIX" "--libdir=$PREFIX/$LIBDIR_ARCH" "--disable-maintainer-mode")
case "$conf" in
static)
- echo "Static lib only configuration"
+ print_header "Conf: Static lib only"
CONF_OPTS+=("--enable-static" "--disable-shared")
;;
*)
- echo "Standard configuration"
+ print_header "Conf: Standard"
;;
esac
# before continuing.
case "$build" in
oot)
- echo "Out of tree build"
+ print_header "Build: Out of tree"
# Create and enter a temporary build directory
builddir=$(mktemp -d)
;;
dist)
- echo "Distribution in-tree build"
+ print_header "Build: Distribution In-tree"
# Run configure and generate the tar file
# in the source directory
;;
oot-dist)
- echo "Distribution out of tree build"
+ print_header "Build: Distribution Out of tree"
# Create and enter a temporary build directory
builddir=$(mktemp -d)
;;
*)
- echo "Standard in-tree build"
+ print_header "Build: Standard In-tree"
+
./configure "${CONF_OPTS[@]}" || failed_configure
;;
esac
# We are now inside a configured build directory
# BUILD!
-$MAKE -j "$($NPROC)" V=1
+print_header "BUILD!"
+$BEAR ${BEAR:+--} $MAKE -j "$($NPROC)" V=1
-# Install in the workspace
-$MAKE install DESTDIR="$WORKSPACE"
+# Install in the workspace if enabled
+if [ "$LIBRSEQ_MAKE_INSTALL" = "yes" ]; then
+ print_header "Install"
-# Run tests, don't fail now, we want to run the archiving steps
-set +e
-$MAKE --keep-going check
-ret=$?
-set -e
+ $MAKE install V=1 DESTDIR="$WORKSPACE"
-# Copy tap logs for the jenkins tap parser before cleaning the build dir
-rsync -a --exclude 'test-suite.log' --include '*/' --include '*.log' --exclude='*' tests/ "$WORKSPACE/tap"
+ # Cleanup rpath in executables and shared libraries
+ #find "$WORKSPACE/$PREFIX/bin" -type f -perm -0500 -exec chrpath --delete {} \;
+ find "$WORKSPACE/$PREFIX/$LIBDIR_ARCH" -name "*.so" -exec chrpath --delete {} \;
-# Clean the build directory
-$MAKE clean
+ # Remove libtool .la files
+ find "$WORKSPACE/$PREFIX/$LIBDIR_ARCH" -name "*.la" -delete
+fi
-# Cleanup rpath in executables and shared libraries
-#find "$WORKSPACE/$PREFIX/bin" -type f -perm -0500 -exec chrpath --delete {} \;
-find "$WORKSPACE/$PREFIX/lib" -name "*.so" -exec chrpath --delete {} \;
+# Run tests if enabled
+if [ "$LIBRSEQ_RUN_TESTS" = "yes" ]; then
+ print_header "Run test suite"
+
+ # Run tests, don't fail now, we want to run the archiving steps
+ $MAKE --keep-going check || exit_status=1
+
+ # Copy tap logs for the jenkins tap parser before cleaning the build dir
+ rsync -a --exclude 'test-suite.log' --include '*/' --include '*.log' --exclude='*' tests/ "$WORKSPACE/tap"
+
+ # Copy the test suites top-level log which includes all tests failures
+ rsync -a --include 'test-suite.log' --include '*/' --exclude='*' tests/ "$WORKSPACE/log"
+fi
+
+# Clean the build directory
+if [ "$LIBRSEQ_MAKE_CLEAN" = "yes" ]; then
+ print_header "Clean"
+ $MAKE clean
+fi
-# Remove libtool .la files
-find "$WORKSPACE/$PREFIX/lib" -name "*.la" -exec rm -f {} \;
+print_header "Librseq build script ended with: $(test $exit_status == 0 && echo SUCCESS || echo FAILURE)"
-# Exit with the return code of the test suite
-exit $ret
+# Exit with failure if any of the tests failed
+exit $exit_status
# EOF
+# vim: expandtab tabstop=4 shiftwidth=4