How to use LTTng and LTTV in a few lines :
+This document is made of four parts : The first one explains how to install
+LTTng and LTTV from Debian and RPM binary packages, the second one explains how
+to install LTTng and LTTV from sources and the third one describes the steps
+to follow to trace a system and view it. The fourth and last part explains
+briefly how to add a new trace point to the kernel.
+
+What you will typically want is to read sections 1 and 3 : install LTTng from
+binary packages and use it. If there are no packages ready for your system, you
+will have to install from sources (section 2) instead.
+
These operations are made for installing LTTng 0.2 on a linux 2.6.12-rc2-mm2
kernel. Change the versions to fit your needs.
+Author : Mathieu Desnoyers, September 2005
+
+
+
+***********************************************************
+** Section 1 * Installation from Debian or RPM packages **
+***********************************************************
+
+No Debian or RPM packages are ready yet.
+
+TODO
+
+
+***********************************************************
+** Section 2 * Installation from sources **
+***********************************************************
* Getting the LTTng packages
cd /usr/src/lttng
(see http://ltt.polymtl.ca/lttng for package listing)
wget http://ltt.polymtl.ca/lttng/lttng-modules-0.2.tar.bz2
-wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.2.bz2
+wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.3.bz2
bzip2 -cd lttng-modules-0.2.tar.bz2 | tar xvof -
bzip2 -cd linux-2.6.12-rc4.tar.bz2 | tar xvof -
cd linux-2.6.12-rc4
bzip2 -cd ../2.6.12-rc4-mm2.bz2 | patch -p1
-bzip2 -cd /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.2.bz2 | patch -p1
+bzip2 -cd /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.3.bz2 | patch -p1
cd ..
-mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.2
+mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.3
* Installing a LTTng kernel
su -
-cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.2
+cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3
make menuconfig
General setup
* Linux Trace Toolkit Instrumentation Support
do NOT activate (not ready yet) :
Align Linux Trace Toolkit Traces
Activate Linux Trace Toolkit Heartbeat Timer
+ IMPORTANT : This is enabled by default : you must disable it!
+make
make install
+make modules_install
+
+Depending on your boot loader, you may want to execute :
+update-grub or lilo
+
reboot
su -
cd /usr/src/lttng/lttng-modules-0.2
-KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.2 make
-KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.2 make modules_install
+KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 make
+KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 make modules_install
note : at this stage, you might want to execute
modprobe ltt-control
su -
cd /usr/src
-wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.5-16092005.tar.gz
-gzip -cd LinuxTraceToolkitViewer-0.5-16092005.tar.gz | tar xvof -
-cd LinuxTraceToolkitViewer-0.5-16092005
+wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.6-16092005.tar.gz
+gzip -cd LinuxTraceToolkitViewer-0.6-16092005.tar.gz | tar xvof -
+cd LinuxTraceToolkitViewer-0.6-16092005
+(refer to README to see the development libraries that must be installed on you
+system)
./configure
make
make install
-* Use LTTV
+
+
+
+***********************************************************
+** Section 3 * Using LTTV **
+***********************************************************
+
+* Use graphical LTTV
lttv-gui (or /usr/local/bin/lttv-gui)
- - Spot the "Trace Control" icon : click on it
+ - Spot the "Tracing Control" icon : click on it
+ (it's a traffic light icon)
- enter the root password
- click "start"
- click "stop"
- Yes
* You should now see a trace
+* Use text mode LTTV
+
+Fell free to look in /usr/local/lib/lttv/plugins to see all the text and
+graphical plugins available.
+
+For example, a simple trace dump in text format is available with :
+
+lttv -m textDump -t /tmp/trace
+
+see lttv -m textDump --help for detailed command line options of textDump.
+
+
+
+
+***********************************************************
+** Section 4 * Adding new instrumentations with genevent **
+***********************************************************
* Getting and installing genevent
-u -
+su -
cd /usr/src
wget http://ltt.polymtl.ca/packages/genevent-0.1.tar.gz
gzip -cd genevent-0.1.tar.gz | tar xvof -
cd /tmp
/usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/yourfacility.xml
cp ltt-facility-yourfacility.h ltt-facility-id-yourfacility.h \
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.2/include/linux/ltt
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/include/linux/ltt
cp ltt-facility-loader-yourfacility.c ltt-facility-loader-yourfacility.h \
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.2/ltt
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/ltt
* edit the kernel file you want to instrument
- Add #include <linux/ltt/ltt-facility-yourfacility.h> at the beginning
of the file.
- Add a call to the tracing functions. See their names and parameters in
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.2/include/linux/ltt/ltt-facility-yourfacility.h
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/include/linux/ltt/ltt-facility-yourfacility.h
projects / lttv.git / blobdiff