2 * Copyright (C) 2012 - Julien Desfossez <jdesfossez@efficios.com>
3 * David Goulet <dgoulet@efficios.com>
4 * 2013 - Jérémie Galarneau <jeremie.galarneau@efficios.com>
5 * 2015 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License, version 2 only,
9 * as published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * You should have received a copy of the GNU General Public License along
17 * with this program; if not, write to the Free Software Foundation, Inc.,
18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
31 #include <sys/mount.h>
32 #include <sys/resource.h>
33 #include <sys/socket.h>
35 #include <sys/types.h>
38 #include <urcu/futex.h>
39 #include <urcu/uatomic.h>
44 #include <lttng/lttng.h>
45 #include <common/common.h>
46 #include <common/compat/poll.h>
47 #include <common/compat/socket.h>
48 #include <common/compat/endian.h>
49 #include <common/defaults.h>
50 #include <common/daemonize.h>
51 #include <common/futex.h>
52 #include <common/sessiond-comm/sessiond-comm.h>
53 #include <common/sessiond-comm/inet.h>
54 #include <common/sessiond-comm/relayd.h>
55 #include <common/uri.h>
56 #include <common/utils.h>
57 #include <common/config/config.h>
58 #include <urcu/rculist.h>
61 #include "ctf-trace.h"
64 #include "lttng-relayd.h"
66 #include "health-relayd.h"
67 #include "testpoint.h"
68 #include "viewer-stream.h"
71 #include "connection.h"
72 #include "tracefile-array.h"
74 /* command line options */
75 char *opt_output_path
;
76 static int opt_daemon
, opt_background
;
79 * We need to wait for listener and live listener threads, as well as
80 * health check thread, before being ready to signal readiness.
82 #define NR_LTTNG_RELAY_READY 3
83 static int lttng_relay_ready
= NR_LTTNG_RELAY_READY
;
84 static int recv_child_signal
; /* Set to 1 when a SIGUSR1 signal is received. */
85 static pid_t child_ppid
; /* Internal parent PID use with daemonize. */
87 static struct lttng_uri
*control_uri
;
88 static struct lttng_uri
*data_uri
;
89 static struct lttng_uri
*live_uri
;
93 const char *tracing_group_name
= DEFAULT_TRACING_GROUP
;
94 static int tracing_group_name_override
;
96 const char * const config_section_name
= "relayd";
99 * Quit pipe for all threads. This permits a single cancellation point
100 * for all threads when receiving an event on the pipe.
102 int thread_quit_pipe
[2] = { -1, -1 };
105 * This pipe is used to inform the worker thread that a command is queued and
106 * ready to be processed.
108 static int relay_conn_pipe
[2] = { -1, -1 };
110 /* Shared between threads */
111 static int dispatch_thread_exit
;
113 static pthread_t listener_thread
;
114 static pthread_t dispatcher_thread
;
115 static pthread_t worker_thread
;
116 static pthread_t health_thread
;
119 * last_relay_stream_id_lock protects last_relay_stream_id increment
120 * atomicity on 32-bit architectures.
122 static pthread_mutex_t last_relay_stream_id_lock
= PTHREAD_MUTEX_INITIALIZER
;
123 static uint64_t last_relay_stream_id
;
126 * Relay command queue.
128 * The relay_thread_listener and relay_thread_dispatcher communicate with this
131 static struct relay_conn_queue relay_conn_queue
;
133 /* buffer allocated at startup, used to store the trace data */
134 static char *data_buffer
;
135 static unsigned int data_buffer_size
;
137 /* Global relay stream hash table. */
138 struct lttng_ht
*relay_streams_ht
;
140 /* Global relay viewer stream hash table. */
141 struct lttng_ht
*viewer_streams_ht
;
143 /* Global relay sessions hash table. */
144 struct lttng_ht
*sessions_ht
;
146 /* Relayd health monitoring */
147 struct health_app
*health_relayd
;
149 static struct option long_options
[] = {
150 { "control-port", 1, 0, 'C', },
151 { "data-port", 1, 0, 'D', },
152 { "live-port", 1, 0, 'L', },
153 { "daemonize", 0, 0, 'd', },
154 { "background", 0, 0, 'b', },
155 { "group", 1, 0, 'g', },
156 { "help", 0, 0, 'h', },
157 { "output", 1, 0, 'o', },
158 { "verbose", 0, 0, 'v', },
159 { "config", 1, 0, 'f' },
163 static const char *config_ignore_options
[] = { "help", "config" };
166 * usage function on stderr
168 static void usage(void)
170 fprintf(stderr
, "Usage: %s OPTIONS\n\nOptions:\n", progname
);
171 fprintf(stderr
, " -h, --help Display this usage.\n");
172 fprintf(stderr
, " -d, --daemonize Start as a daemon.\n");
173 fprintf(stderr
, " -b, --background Start as a daemon, keeping console open.\n");
174 fprintf(stderr
, " -C, --control-port URL Control port listening.\n");
175 fprintf(stderr
, " -D, --data-port URL Data port listening.\n");
176 fprintf(stderr
, " -L, --live-port URL Live view port listening.\n");
177 fprintf(stderr
, " -o, --output PATH Output path for traces. Must use an absolute path.\n");
178 fprintf(stderr
, " -v, --verbose Verbose mode. Activate DBG() macro.\n");
179 fprintf(stderr
, " -g, --group NAME Specify the tracing group name. (default: tracing)\n");
180 fprintf(stderr
, " -f --config Load daemon configuration file\n");
184 * Take an option from the getopt output and set it in the right variable to be
187 * Return 0 on success else a negative value.
189 static int set_option(int opt
, const char *arg
, const char *optname
)
195 fprintf(stderr
, "option %s", optname
);
197 fprintf(stderr
, " with arg %s\n", arg
);
201 ret
= uri_parse(arg
, &control_uri
);
203 ERR("Invalid control URI specified");
206 if (control_uri
->port
== 0) {
207 control_uri
->port
= DEFAULT_NETWORK_CONTROL_PORT
;
211 ret
= uri_parse(arg
, &data_uri
);
213 ERR("Invalid data URI specified");
216 if (data_uri
->port
== 0) {
217 data_uri
->port
= DEFAULT_NETWORK_DATA_PORT
;
221 ret
= uri_parse(arg
, &live_uri
);
223 ERR("Invalid live URI specified");
226 if (live_uri
->port
== 0) {
227 live_uri
->port
= DEFAULT_NETWORK_VIEWER_PORT
;
237 tracing_group_name
= strdup(arg
);
238 if (tracing_group_name
== NULL
) {
243 tracing_group_name_override
= 1;
249 ret
= asprintf(&opt_output_path
, "%s", arg
);
252 PERROR("asprintf opt_output_path");
257 /* Verbose level can increase using multiple -v */
259 lttng_opt_verbose
= config_parse_value(arg
);
261 /* Only 3 level of verbosity (-vvv). */
262 if (lttng_opt_verbose
< 3) {
263 lttng_opt_verbose
+= 1;
268 /* Unknown option or other error.
269 * Error is printed by getopt, just return */
282 * config_entry_handler_cb used to handle options read from a config file.
283 * See config_entry_handler_cb comment in common/config/config.h for the
284 * return value conventions.
286 static int config_entry_handler(const struct config_entry
*entry
, void *unused
)
290 if (!entry
|| !entry
->name
|| !entry
->value
) {
295 /* Check if the option is to be ignored */
296 for (i
= 0; i
< sizeof(config_ignore_options
) / sizeof(char *); i
++) {
297 if (!strcmp(entry
->name
, config_ignore_options
[i
])) {
302 for (i
= 0; i
< (sizeof(long_options
) / sizeof(struct option
)) - 1; i
++) {
303 /* Ignore if entry name is not fully matched. */
304 if (strcmp(entry
->name
, long_options
[i
].name
)) {
309 * If the option takes no argument on the command line,
310 * we have to check if the value is "true". We support
311 * non-zero numeric values, true, on and yes.
313 if (!long_options
[i
].has_arg
) {
314 ret
= config_parse_value(entry
->value
);
317 WARN("Invalid configuration value \"%s\" for option %s",
318 entry
->value
, entry
->name
);
320 /* False, skip boolean config option. */
325 ret
= set_option(long_options
[i
].val
, entry
->value
, entry
->name
);
329 WARN("Unrecognized option \"%s\" in daemon configuration file.",
336 static int set_options(int argc
, char **argv
)
338 int c
, ret
= 0, option_index
= 0, retval
= 0;
339 int orig_optopt
= optopt
, orig_optind
= optind
;
340 char *default_address
, *optstring
;
341 const char *config_path
= NULL
;
343 optstring
= utils_generate_optstring(long_options
,
344 sizeof(long_options
) / sizeof(struct option
));
350 /* Check for the --config option */
352 while ((c
= getopt_long(argc
, argv
, optstring
, long_options
,
353 &option_index
)) != -1) {
357 } else if (c
!= 'f') {
361 config_path
= utils_expand_path(optarg
);
363 ERR("Failed to resolve path: %s", optarg
);
367 ret
= config_get_section_entries(config_path
, config_section_name
,
368 config_entry_handler
, NULL
);
371 ERR("Invalid configuration option at line %i", ret
);
377 /* Reset getopt's global state */
378 optopt
= orig_optopt
;
379 optind
= orig_optind
;
381 c
= getopt_long(argc
, argv
, optstring
, long_options
, &option_index
);
386 ret
= set_option(c
, optarg
, long_options
[option_index
].name
);
393 /* assign default values */
394 if (control_uri
== NULL
) {
395 ret
= asprintf(&default_address
,
396 "tcp://" DEFAULT_NETWORK_CONTROL_BIND_ADDRESS
":%d",
397 DEFAULT_NETWORK_CONTROL_PORT
);
399 PERROR("asprintf default data address");
404 ret
= uri_parse(default_address
, &control_uri
);
405 free(default_address
);
407 ERR("Invalid control URI specified");
412 if (data_uri
== NULL
) {
413 ret
= asprintf(&default_address
,
414 "tcp://" DEFAULT_NETWORK_DATA_BIND_ADDRESS
":%d",
415 DEFAULT_NETWORK_DATA_PORT
);
417 PERROR("asprintf default data address");
422 ret
= uri_parse(default_address
, &data_uri
);
423 free(default_address
);
425 ERR("Invalid data URI specified");
430 if (live_uri
== NULL
) {
431 ret
= asprintf(&default_address
,
432 "tcp://" DEFAULT_NETWORK_VIEWER_BIND_ADDRESS
":%d",
433 DEFAULT_NETWORK_VIEWER_PORT
);
435 PERROR("asprintf default viewer control address");
440 ret
= uri_parse(default_address
, &live_uri
);
441 free(default_address
);
443 ERR("Invalid viewer control URI specified");
454 static void print_global_objects(void)
456 rcu_register_thread();
458 print_viewer_streams();
459 print_relay_streams();
462 rcu_unregister_thread();
468 static void relayd_cleanup(void)
470 print_global_objects();
474 if (viewer_streams_ht
)
475 lttng_ht_destroy(viewer_streams_ht
);
476 if (relay_streams_ht
)
477 lttng_ht_destroy(relay_streams_ht
);
479 lttng_ht_destroy(sessions_ht
);
481 /* free the dynamically allocated opt_output_path */
482 free(opt_output_path
);
484 /* Close thread quit pipes */
485 utils_close_pipe(thread_quit_pipe
);
487 uri_free(control_uri
);
489 /* Live URI is freed in the live thread. */
491 if (tracing_group_name_override
) {
492 free((void *) tracing_group_name
);
497 * Write to writable pipe used to notify a thread.
499 static int notify_thread_pipe(int wpipe
)
503 ret
= lttng_write(wpipe
, "!", 1);
505 PERROR("write poll pipe");
513 static int notify_health_quit_pipe(int *pipe
)
517 ret
= lttng_write(pipe
[1], "4", 1);
519 PERROR("write relay health quit");
528 * Stop all relayd and relayd-live threads.
530 int lttng_relay_stop_threads(void)
534 /* Stopping all threads */
535 DBG("Terminating all threads");
536 if (notify_thread_pipe(thread_quit_pipe
[1])) {
537 ERR("write error on thread quit pipe");
541 if (notify_health_quit_pipe(health_quit_pipe
)) {
542 ERR("write error on health quit pipe");
545 /* Dispatch thread */
546 CMM_STORE_SHARED(dispatch_thread_exit
, 1);
547 futex_nto1_wake(&relay_conn_queue
.futex
);
549 if (relayd_live_stop()) {
550 ERR("Error stopping live threads");
557 * Signal handler for the daemon
559 * Simply stop all worker threads, leaving main() return gracefully after
560 * joining all threads and calling cleanup().
562 static void sighandler(int sig
)
566 DBG("SIGPIPE caught");
569 DBG("SIGINT caught");
570 if (lttng_relay_stop_threads()) {
571 ERR("Error stopping threads");
575 DBG("SIGTERM caught");
576 if (lttng_relay_stop_threads()) {
577 ERR("Error stopping threads");
581 CMM_STORE_SHARED(recv_child_signal
, 1);
589 * Setup signal handler for :
590 * SIGINT, SIGTERM, SIGPIPE
592 static int set_signal_handler(void)
598 if ((ret
= sigemptyset(&sigset
)) < 0) {
599 PERROR("sigemptyset");
603 sa
.sa_handler
= sighandler
;
606 if ((ret
= sigaction(SIGTERM
, &sa
, NULL
)) < 0) {
611 if ((ret
= sigaction(SIGINT
, &sa
, NULL
)) < 0) {
616 if ((ret
= sigaction(SIGPIPE
, &sa
, NULL
)) < 0) {
621 if ((ret
= sigaction(SIGUSR1
, &sa
, NULL
)) < 0) {
626 DBG("Signal handler set for SIGTERM, SIGUSR1, SIGPIPE and SIGINT");
631 void lttng_relay_notify_ready(void)
633 /* Notify the parent of the fork() process that we are ready. */
634 if (opt_daemon
|| opt_background
) {
635 if (uatomic_sub_return(<tng_relay_ready
, 1) == 0) {
636 kill(child_ppid
, SIGUSR1
);
642 * Init thread quit pipe.
644 * Return -1 on error or 0 if all pipes are created.
646 static int init_thread_quit_pipe(void)
650 ret
= utils_create_pipe_cloexec(thread_quit_pipe
);
656 * Create a poll set with O_CLOEXEC and add the thread quit pipe to the set.
658 static int create_thread_poll_set(struct lttng_poll_event
*events
, int size
)
662 if (events
== NULL
|| size
== 0) {
667 ret
= lttng_poll_create(events
, size
, LTTNG_CLOEXEC
);
673 ret
= lttng_poll_add(events
, thread_quit_pipe
[0], LPOLLIN
| LPOLLERR
);
685 * Check if the thread quit pipe was triggered.
687 * Return 1 if it was triggered else 0;
689 static int check_thread_quit_pipe(int fd
, uint32_t events
)
691 if (fd
== thread_quit_pipe
[0] && (events
& LPOLLIN
)) {
699 * Create and init socket from uri.
701 static struct lttcomm_sock
*relay_socket_create(struct lttng_uri
*uri
)
704 struct lttcomm_sock
*sock
= NULL
;
706 sock
= lttcomm_alloc_sock_from_uri(uri
);
708 ERR("Allocating socket");
712 ret
= lttcomm_create_sock(sock
);
716 DBG("Listening on sock %d", sock
->fd
);
718 ret
= sock
->ops
->bind(sock
);
723 ret
= sock
->ops
->listen(sock
, -1);
733 lttcomm_destroy_sock(sock
);
739 * This thread manages the listening for new connections on the network
741 static void *relay_thread_listener(void *data
)
743 int i
, ret
, pollfd
, err
= -1;
744 uint32_t revents
, nb_fd
;
745 struct lttng_poll_event events
;
746 struct lttcomm_sock
*control_sock
, *data_sock
;
748 DBG("[thread] Relay listener started");
750 health_register(health_relayd
, HEALTH_RELAYD_TYPE_LISTENER
);
752 health_code_update();
754 control_sock
= relay_socket_create(control_uri
);
756 goto error_sock_control
;
759 data_sock
= relay_socket_create(data_uri
);
761 goto error_sock_relay
;
765 * Pass 3 as size here for the thread quit pipe, control and
768 ret
= create_thread_poll_set(&events
, 3);
770 goto error_create_poll
;
773 /* Add the control socket */
774 ret
= lttng_poll_add(&events
, control_sock
->fd
, LPOLLIN
| LPOLLRDHUP
);
779 /* Add the data socket */
780 ret
= lttng_poll_add(&events
, data_sock
->fd
, LPOLLIN
| LPOLLRDHUP
);
785 lttng_relay_notify_ready();
787 if (testpoint(relayd_thread_listener
)) {
788 goto error_testpoint
;
792 health_code_update();
794 DBG("Listener accepting connections");
798 ret
= lttng_poll_wait(&events
, -1);
802 * Restart interrupted system call.
804 if (errno
== EINTR
) {
812 DBG("Relay new connection received");
813 for (i
= 0; i
< nb_fd
; i
++) {
814 health_code_update();
816 /* Fetch once the poll data */
817 revents
= LTTNG_POLL_GETEV(&events
, i
);
818 pollfd
= LTTNG_POLL_GETFD(&events
, i
);
822 * No activity for this FD (poll
828 /* Thread quit pipe has been closed. Killing thread. */
829 ret
= check_thread_quit_pipe(pollfd
, revents
);
835 if (revents
& (LPOLLERR
| LPOLLHUP
| LPOLLRDHUP
)) {
836 ERR("socket poll error");
838 } else if (revents
& LPOLLIN
) {
840 * A new connection is requested, therefore a
841 * sessiond/consumerd connection is allocated in
842 * this thread, enqueued to a global queue and
843 * dequeued (and freed) in the worker thread.
846 struct relay_connection
*new_conn
;
847 struct lttcomm_sock
*newsock
;
848 enum connection_type type
;
850 if (pollfd
== data_sock
->fd
) {
852 newsock
= data_sock
->ops
->accept(data_sock
);
853 DBG("Relay data connection accepted, socket %d",
856 assert(pollfd
== control_sock
->fd
);
857 type
= RELAY_CONTROL
;
858 newsock
= control_sock
->ops
->accept(control_sock
);
859 DBG("Relay control connection accepted, socket %d",
863 PERROR("accepting sock");
867 ret
= setsockopt(newsock
->fd
, SOL_SOCKET
, SO_REUSEADDR
, &val
,
870 PERROR("setsockopt inet");
871 lttcomm_destroy_sock(newsock
);
874 new_conn
= connection_create(newsock
, type
);
876 lttcomm_destroy_sock(newsock
);
880 /* Enqueue request for the dispatcher thread. */
881 cds_wfcq_enqueue(&relay_conn_queue
.head
, &relay_conn_queue
.tail
,
885 * Wake the dispatch queue futex.
886 * Implicit memory barrier with the
887 * exchange in cds_wfcq_enqueue.
889 futex_nto1_wake(&relay_conn_queue
.futex
);
898 lttng_poll_clean(&events
);
900 if (data_sock
->fd
>= 0) {
901 ret
= data_sock
->ops
->close(data_sock
);
906 lttcomm_destroy_sock(data_sock
);
908 if (control_sock
->fd
>= 0) {
909 ret
= control_sock
->ops
->close(control_sock
);
914 lttcomm_destroy_sock(control_sock
);
918 ERR("Health error occurred in %s", __func__
);
920 health_unregister(health_relayd
);
921 DBG("Relay listener thread cleanup complete");
922 lttng_relay_stop_threads();
927 * This thread manages the dispatching of the requests to worker threads
929 static void *relay_thread_dispatcher(void *data
)
933 struct cds_wfcq_node
*node
;
934 struct relay_connection
*new_conn
= NULL
;
936 DBG("[thread] Relay dispatcher started");
938 health_register(health_relayd
, HEALTH_RELAYD_TYPE_DISPATCHER
);
940 if (testpoint(relayd_thread_dispatcher
)) {
941 goto error_testpoint
;
944 health_code_update();
946 while (!CMM_LOAD_SHARED(dispatch_thread_exit
)) {
947 health_code_update();
949 /* Atomically prepare the queue futex */
950 futex_nto1_prepare(&relay_conn_queue
.futex
);
953 health_code_update();
955 /* Dequeue commands */
956 node
= cds_wfcq_dequeue_blocking(&relay_conn_queue
.head
,
957 &relay_conn_queue
.tail
);
959 DBG("Woken up but nothing in the relay command queue");
960 /* Continue thread execution */
963 new_conn
= caa_container_of(node
, struct relay_connection
, qnode
);
965 DBG("Dispatching request waiting on sock %d", new_conn
->sock
->fd
);
968 * Inform worker thread of the new request. This
969 * call is blocking so we can be assured that
970 * the data will be read at some point in time
971 * or wait to the end of the world :)
973 ret
= lttng_write(relay_conn_pipe
[1], &new_conn
, sizeof(new_conn
));
975 PERROR("write connection pipe");
976 connection_put(new_conn
);
979 } while (node
!= NULL
);
981 /* Futex wait on queue. Blocking call on futex() */
983 futex_nto1_wait(&relay_conn_queue
.futex
);
987 /* Normal exit, no error */
994 ERR("Health error occurred in %s", __func__
);
996 health_unregister(health_relayd
);
997 DBG("Dispatch thread dying");
998 lttng_relay_stop_threads();
1003 * Set index data from the control port to a given index object.
1005 static int set_index_control_data(struct relay_index
*index
,
1006 struct lttcomm_relayd_index
*data
)
1008 struct ctf_packet_index index_data
;
1011 * The index on disk is encoded in big endian, so we don't need
1012 * to convert the data received on the network. The data_offset
1013 * value is NEVER modified here and is updated by the data
1016 index_data
.packet_size
= data
->packet_size
;
1017 index_data
.content_size
= data
->content_size
;
1018 index_data
.timestamp_begin
= data
->timestamp_begin
;
1019 index_data
.timestamp_end
= data
->timestamp_end
;
1020 index_data
.events_discarded
= data
->events_discarded
;
1021 index_data
.stream_id
= data
->stream_id
;
1022 return relay_index_set_data(index
, &index_data
);
1026 * Handle the RELAYD_CREATE_SESSION command.
1028 * On success, send back the session id or else return a negative value.
1030 static int relay_create_session(struct lttcomm_relayd_hdr
*recv_hdr
,
1031 struct relay_connection
*conn
)
1033 int ret
= 0, send_ret
;
1034 struct relay_session
*session
;
1035 struct lttcomm_relayd_status_session reply
;
1036 char session_name
[NAME_MAX
];
1037 char hostname
[HOST_NAME_MAX
];
1038 uint32_t live_timer
= 0;
1039 bool snapshot
= false;
1041 memset(session_name
, 0, NAME_MAX
);
1042 memset(hostname
, 0, HOST_NAME_MAX
);
1044 memset(&reply
, 0, sizeof(reply
));
1046 switch (conn
->minor
) {
1051 case 4: /* LTTng sessiond 2.4 */
1053 ret
= cmd_create_session_2_4(conn
, session_name
,
1054 hostname
, &live_timer
, &snapshot
);
1060 session
= session_create(session_name
, hostname
, live_timer
,
1061 snapshot
, conn
->major
, conn
->minor
);
1066 assert(!conn
->session
);
1067 conn
->session
= session
;
1068 DBG("Created session %" PRIu64
, session
->id
);
1070 reply
.session_id
= htobe64(session
->id
);
1074 reply
.ret_code
= htobe32(LTTNG_ERR_FATAL
);
1076 reply
.ret_code
= htobe32(LTTNG_OK
);
1079 send_ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
, sizeof(reply
), 0);
1081 ERR("Relayd sending session id");
1089 * When we have received all the streams and the metadata for a channel,
1090 * we make them visible to the viewer threads.
1092 static void publish_connection_local_streams(struct relay_connection
*conn
)
1094 struct relay_stream
*stream
;
1095 struct relay_session
*session
= conn
->session
;
1098 * We publish all streams belonging to a session atomically wrt
1101 pthread_mutex_lock(&session
->lock
);
1103 cds_list_for_each_entry_rcu(stream
, &session
->recv_list
,
1105 stream_publish(stream
);
1110 * Inform the viewer that there are new streams in the session.
1112 if (session
->viewer_attached
) {
1113 uatomic_set(&session
->new_streams
, 1);
1115 pthread_mutex_unlock(&session
->lock
);
1119 * relay_add_stream: allocate a new stream for a session
1121 static int relay_add_stream(struct lttcomm_relayd_hdr
*recv_hdr
,
1122 struct relay_connection
*conn
)
1126 struct relay_session
*session
= conn
->session
;
1127 struct relay_stream
*stream
= NULL
;
1128 struct lttcomm_relayd_status_stream reply
;
1129 struct ctf_trace
*trace
= NULL
;
1130 uint64_t stream_handle
= -1ULL;
1131 char *path_name
= NULL
, *channel_name
= NULL
;
1132 uint64_t tracefile_size
= 0, tracefile_count
= 0;
1134 if (!session
|| conn
->version_check_done
== 0) {
1135 ERR("Trying to add a stream before version check");
1137 goto end_no_session
;
1140 switch (session
->minor
) {
1141 case 1: /* LTTng sessiond 2.1. Allocates path_name and channel_name. */
1142 ret
= cmd_recv_stream_2_1(conn
, &path_name
,
1145 case 2: /* LTTng sessiond 2.2. Allocates path_name and channel_name. */
1147 ret
= cmd_recv_stream_2_2(conn
, &path_name
,
1148 &channel_name
, &tracefile_size
, &tracefile_count
);
1155 trace
= ctf_trace_get_by_path_or_create(session
, path_name
);
1159 /* This stream here has one reference on the trace. */
1161 pthread_mutex_lock(&last_relay_stream_id_lock
);
1162 stream_handle
= ++last_relay_stream_id
;
1163 pthread_mutex_unlock(&last_relay_stream_id_lock
);
1165 /* We pass ownership of path_name and channel_name. */
1166 stream
= stream_create(trace
, stream_handle
, path_name
,
1167 channel_name
, tracefile_size
, tracefile_count
);
1169 channel_name
= NULL
;
1172 * Streams are the owners of their trace. Reference to trace is
1173 * kept within stream_create().
1175 ctf_trace_put(trace
);
1178 memset(&reply
, 0, sizeof(reply
));
1179 reply
.handle
= htobe64(stream_handle
);
1181 reply
.ret_code
= htobe32(LTTNG_ERR_UNK
);
1183 reply
.ret_code
= htobe32(LTTNG_OK
);
1186 send_ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
,
1187 sizeof(struct lttcomm_relayd_status_stream
), 0);
1189 ERR("Relay sending stream id");
1190 ret
= (int) send_ret
;
1200 * relay_close_stream: close a specific stream
1202 static int relay_close_stream(struct lttcomm_relayd_hdr
*recv_hdr
,
1203 struct relay_connection
*conn
)
1206 struct relay_session
*session
= conn
->session
;
1207 struct lttcomm_relayd_close_stream stream_info
;
1208 struct lttcomm_relayd_generic_reply reply
;
1209 struct relay_stream
*stream
;
1211 DBG("Close stream received");
1213 if (!session
|| conn
->version_check_done
== 0) {
1214 ERR("Trying to close a stream before version check");
1216 goto end_no_session
;
1219 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, &stream_info
,
1220 sizeof(struct lttcomm_relayd_close_stream
), 0);
1221 if (ret
< sizeof(struct lttcomm_relayd_close_stream
)) {
1223 /* Orderly shutdown. Not necessary to print an error. */
1224 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
1226 ERR("Relay didn't receive valid add_stream struct size : %d", ret
);
1229 goto end_no_session
;
1232 stream
= stream_get_by_id(be64toh(stream_info
.stream_id
));
1237 pthread_mutex_lock(&stream
->lock
);
1238 stream
->closed
= true;
1239 stream
->last_net_seq_num
= be64toh(stream_info
.last_net_seq_num
);
1240 if (stream
->is_metadata
) {
1241 struct relay_viewer_stream
*vstream
;
1243 vstream
= viewer_stream_get_by_id(stream
->stream_handle
);
1245 if (vstream
->metadata_sent
== stream
->metadata_received
) {
1247 * Since all the metadata has been sent to the
1248 * viewer and that we have a request to close
1249 * its stream, we can safely teardown the
1250 * corresponding metadata viewer stream.
1252 viewer_stream_put(vstream
);
1254 /* Put local reference. */
1255 viewer_stream_put(vstream
);
1258 pthread_mutex_unlock(&stream
->lock
);
1262 memset(&reply
, 0, sizeof(reply
));
1264 reply
.ret_code
= htobe32(LTTNG_ERR_UNK
);
1266 reply
.ret_code
= htobe32(LTTNG_OK
);
1268 send_ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
,
1269 sizeof(struct lttcomm_relayd_generic_reply
), 0);
1271 ERR("Relay sending stream id");
1280 * relay_unknown_command: send -1 if received unknown command
1282 static void relay_unknown_command(struct relay_connection
*conn
)
1284 struct lttcomm_relayd_generic_reply reply
;
1287 memset(&reply
, 0, sizeof(reply
));
1288 reply
.ret_code
= htobe32(LTTNG_ERR_UNK
);
1289 ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
,
1290 sizeof(struct lttcomm_relayd_generic_reply
), 0);
1292 ERR("Relay sending unknown command");
1297 * relay_start: send an acknowledgment to the client to tell if we are
1298 * ready to receive data. We are ready if a session is established.
1300 static int relay_start(struct lttcomm_relayd_hdr
*recv_hdr
,
1301 struct relay_connection
*conn
)
1303 int ret
= htobe32(LTTNG_OK
);
1304 struct lttcomm_relayd_generic_reply reply
;
1305 struct relay_session
*session
= conn
->session
;
1308 DBG("Trying to start the streaming without a session established");
1309 ret
= htobe32(LTTNG_ERR_UNK
);
1312 memset(&reply
, 0, sizeof(reply
));
1313 reply
.ret_code
= ret
;
1314 ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
,
1315 sizeof(struct lttcomm_relayd_generic_reply
), 0);
1317 ERR("Relay sending start ack");
1324 * Append padding to the file pointed by the file descriptor fd.
1326 static int write_padding_to_file(int fd
, uint32_t size
)
1335 zeros
= zmalloc(size
);
1336 if (zeros
== NULL
) {
1337 PERROR("zmalloc zeros for padding");
1342 ret
= lttng_write(fd
, zeros
, size
);
1344 PERROR("write padding to file");
1354 * relay_recv_metadata: receive the metadata for the session.
1356 static int relay_recv_metadata(struct lttcomm_relayd_hdr
*recv_hdr
,
1357 struct relay_connection
*conn
)
1359 int ret
= htobe32(LTTNG_OK
);
1361 struct relay_session
*session
= conn
->session
;
1362 struct lttcomm_relayd_metadata_payload
*metadata_struct
;
1363 struct relay_stream
*metadata_stream
;
1364 uint64_t data_size
, payload_size
;
1367 ERR("Metadata sent before version check");
1372 data_size
= payload_size
= be64toh(recv_hdr
->data_size
);
1373 if (data_size
< sizeof(struct lttcomm_relayd_metadata_payload
)) {
1374 ERR("Incorrect data size");
1378 payload_size
-= sizeof(struct lttcomm_relayd_metadata_payload
);
1380 if (data_buffer_size
< data_size
) {
1381 /* In case the realloc fails, we can free the memory */
1384 tmp_data_ptr
= realloc(data_buffer
, data_size
);
1385 if (!tmp_data_ptr
) {
1386 ERR("Allocating data buffer");
1391 data_buffer
= tmp_data_ptr
;
1392 data_buffer_size
= data_size
;
1394 memset(data_buffer
, 0, data_size
);
1395 DBG2("Relay receiving metadata, waiting for %" PRIu64
" bytes", data_size
);
1396 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, data_buffer
, data_size
, 0);
1397 if (ret
< 0 || ret
!= data_size
) {
1399 /* Orderly shutdown. Not necessary to print an error. */
1400 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
1402 ERR("Relay didn't receive the whole metadata");
1407 metadata_struct
= (struct lttcomm_relayd_metadata_payload
*) data_buffer
;
1409 metadata_stream
= stream_get_by_id(be64toh(metadata_struct
->stream_id
));
1410 if (!metadata_stream
) {
1415 pthread_mutex_lock(&metadata_stream
->lock
);
1417 size_ret
= lttng_write(metadata_stream
->stream_fd
->fd
, metadata_struct
->payload
,
1419 if (size_ret
< payload_size
) {
1420 ERR("Relay error writing metadata on file");
1425 ret
= write_padding_to_file(metadata_stream
->stream_fd
->fd
,
1426 be32toh(metadata_struct
->padding_size
));
1431 metadata_stream
->metadata_received
+=
1432 payload_size
+ be32toh(metadata_struct
->padding_size
);
1433 DBG2("Relay metadata written. Updated metadata_received %" PRIu64
,
1434 metadata_stream
->metadata_received
);
1437 pthread_mutex_unlock(&metadata_stream
->lock
);
1438 stream_put(metadata_stream
);
1445 * relay_send_version: send relayd version number
1447 static int relay_send_version(struct lttcomm_relayd_hdr
*recv_hdr
,
1448 struct relay_connection
*conn
)
1451 struct lttcomm_relayd_version reply
, msg
;
1453 conn
->version_check_done
= 1;
1455 /* Get version from the other side. */
1456 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, &msg
, sizeof(msg
), 0);
1457 if (ret
< 0 || ret
!= sizeof(msg
)) {
1459 /* Orderly shutdown. Not necessary to print an error. */
1460 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
1462 ERR("Relay failed to receive the version values.");
1468 memset(&reply
, 0, sizeof(reply
));
1469 reply
.major
= RELAYD_VERSION_COMM_MAJOR
;
1470 reply
.minor
= RELAYD_VERSION_COMM_MINOR
;
1472 /* Major versions must be the same */
1473 if (reply
.major
!= be32toh(msg
.major
)) {
1474 DBG("Incompatible major versions (%u vs %u), deleting session",
1475 reply
.major
, be32toh(msg
.major
));
1476 connection_put(conn
);
1481 conn
->major
= reply
.major
;
1482 /* We adapt to the lowest compatible version */
1483 if (reply
.minor
<= be32toh(msg
.minor
)) {
1484 conn
->minor
= reply
.minor
;
1486 conn
->minor
= be32toh(msg
.minor
);
1489 reply
.major
= htobe32(reply
.major
);
1490 reply
.minor
= htobe32(reply
.minor
);
1491 ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
,
1492 sizeof(struct lttcomm_relayd_version
), 0);
1494 ERR("Relay sending version");
1497 DBG("Version check done using protocol %u.%u", conn
->major
,
1505 * Check for data pending for a given stream id from the session daemon.
1507 static int relay_data_pending(struct lttcomm_relayd_hdr
*recv_hdr
,
1508 struct relay_connection
*conn
)
1510 struct relay_session
*session
= conn
->session
;
1511 struct lttcomm_relayd_data_pending msg
;
1512 struct lttcomm_relayd_generic_reply reply
;
1513 struct relay_stream
*stream
;
1515 uint64_t last_net_seq_num
, stream_id
;
1517 DBG("Data pending command received");
1519 if (!session
|| conn
->version_check_done
== 0) {
1520 ERR("Trying to check for data before version check");
1522 goto end_no_session
;
1525 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, &msg
, sizeof(msg
), 0);
1526 if (ret
< sizeof(msg
)) {
1528 /* Orderly shutdown. Not necessary to print an error. */
1529 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
1531 ERR("Relay didn't receive valid data_pending struct size : %d",
1535 goto end_no_session
;
1538 stream_id
= be64toh(msg
.stream_id
);
1539 last_net_seq_num
= be64toh(msg
.last_net_seq_num
);
1541 stream
= stream_get_by_id(stream_id
);
1542 if (stream
== NULL
) {
1547 pthread_mutex_lock(&stream
->lock
);
1549 DBG("Data pending for stream id %" PRIu64
" prev_seq %" PRIu64
1550 " and last_seq %" PRIu64
, stream_id
, stream
->prev_seq
,
1553 /* Avoid wrapping issue */
1554 if (((int64_t) (stream
->prev_seq
- last_net_seq_num
)) >= 0) {
1555 /* Data has in fact been written and is NOT pending */
1558 /* Data still being streamed thus pending */
1562 stream
->data_pending_check_done
= true;
1563 pthread_mutex_unlock(&stream
->lock
);
1568 memset(&reply
, 0, sizeof(reply
));
1569 reply
.ret_code
= htobe32(ret
);
1570 ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
, sizeof(reply
), 0);
1572 ERR("Relay data pending ret code failed");
1580 * Wait for the control socket to reach a quiescent state.
1582 * Note that for now, when receiving this command from the session
1583 * daemon, this means that every subsequent commands or data received on
1584 * the control socket has been handled. So, this is why we simply return
1587 static int relay_quiescent_control(struct lttcomm_relayd_hdr
*recv_hdr
,
1588 struct relay_connection
*conn
)
1592 struct relay_stream
*stream
;
1593 struct lttcomm_relayd_quiescent_control msg
;
1594 struct lttcomm_relayd_generic_reply reply
;
1596 DBG("Checking quiescent state on control socket");
1598 if (!conn
->session
|| conn
->version_check_done
== 0) {
1599 ERR("Trying to check for data before version check");
1601 goto end_no_session
;
1604 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, &msg
, sizeof(msg
), 0);
1605 if (ret
< sizeof(msg
)) {
1607 /* Orderly shutdown. Not necessary to print an error. */
1608 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
1610 ERR("Relay didn't receive valid begin data_pending struct size: %d",
1614 goto end_no_session
;
1617 stream_id
= be64toh(msg
.stream_id
);
1618 stream
= stream_get_by_id(stream_id
);
1622 pthread_mutex_lock(&stream
->lock
);
1623 stream
->data_pending_check_done
= true;
1624 pthread_mutex_unlock(&stream
->lock
);
1625 DBG("Relay quiescent control pending flag set to %" PRIu64
, stream_id
);
1628 memset(&reply
, 0, sizeof(reply
));
1629 reply
.ret_code
= htobe32(LTTNG_OK
);
1630 ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
, sizeof(reply
), 0);
1632 ERR("Relay data quiescent control ret code failed");
1640 * Initialize a data pending command. This means that a consumer is about
1641 * to ask for data pending for each stream it holds. Simply iterate over
1642 * all streams of a session and set the data_pending_check_done flag.
1644 * This command returns to the client a LTTNG_OK code.
1646 static int relay_begin_data_pending(struct lttcomm_relayd_hdr
*recv_hdr
,
1647 struct relay_connection
*conn
)
1650 struct lttng_ht_iter iter
;
1651 struct lttcomm_relayd_begin_data_pending msg
;
1652 struct lttcomm_relayd_generic_reply reply
;
1653 struct relay_stream
*stream
;
1654 uint64_t session_id
;
1659 DBG("Init streams for data pending");
1661 if (!conn
->session
|| conn
->version_check_done
== 0) {
1662 ERR("Trying to check for data before version check");
1664 goto end_no_session
;
1667 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, &msg
, sizeof(msg
), 0);
1668 if (ret
< sizeof(msg
)) {
1670 /* Orderly shutdown. Not necessary to print an error. */
1671 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
1673 ERR("Relay didn't receive valid begin data_pending struct size: %d",
1677 goto end_no_session
;
1680 session_id
= be64toh(msg
.session_id
);
1683 * Iterate over all streams to set the begin data pending flag.
1684 * For now, the streams are indexed by stream handle so we have
1685 * to iterate over all streams to find the one associated with
1686 * the right session_id.
1689 cds_lfht_for_each_entry(relay_streams_ht
->ht
, &iter
.iter
, stream
,
1691 if (!stream_get(stream
)) {
1694 if (stream
->trace
->session
->id
== session_id
) {
1695 pthread_mutex_lock(&stream
->lock
);
1696 stream
->data_pending_check_done
= false;
1697 pthread_mutex_unlock(&stream
->lock
);
1698 DBG("Set begin data pending flag to stream %" PRIu64
,
1699 stream
->stream_handle
);
1705 memset(&reply
, 0, sizeof(reply
));
1706 /* All good, send back reply. */
1707 reply
.ret_code
= htobe32(LTTNG_OK
);
1709 ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
, sizeof(reply
), 0);
1711 ERR("Relay begin data pending send reply failed");
1719 * End data pending command. This will check, for a given session id, if
1720 * each stream associated with it has its data_pending_check_done flag
1721 * set. If not, this means that the client lost track of the stream but
1722 * the data is still being streamed on our side. In this case, we inform
1723 * the client that data is in flight.
1725 * Return to the client if there is data in flight or not with a ret_code.
1727 static int relay_end_data_pending(struct lttcomm_relayd_hdr
*recv_hdr
,
1728 struct relay_connection
*conn
)
1731 struct lttng_ht_iter iter
;
1732 struct lttcomm_relayd_end_data_pending msg
;
1733 struct lttcomm_relayd_generic_reply reply
;
1734 struct relay_stream
*stream
;
1735 uint64_t session_id
;
1736 uint32_t is_data_inflight
= 0;
1738 DBG("End data pending command");
1740 if (!conn
->session
|| conn
->version_check_done
== 0) {
1741 ERR("Trying to check for data before version check");
1743 goto end_no_session
;
1746 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, &msg
, sizeof(msg
), 0);
1747 if (ret
< sizeof(msg
)) {
1749 /* Orderly shutdown. Not necessary to print an error. */
1750 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
1752 ERR("Relay didn't receive valid end data_pending struct size: %d",
1756 goto end_no_session
;
1759 session_id
= be64toh(msg
.session_id
);
1762 * Iterate over all streams to see if the begin data pending
1766 cds_lfht_for_each_entry(relay_streams_ht
->ht
, &iter
.iter
, stream
,
1768 if (!stream_get(stream
)) {
1771 if (stream
->trace
->session
->id
!= session_id
) {
1775 pthread_mutex_lock(&stream
->lock
);
1776 if (!stream
->data_pending_check_done
) {
1777 if (!stream
->closed
|| !(((int64_t) (stream
->prev_seq
- stream
->last_net_seq_num
)) >= 0)) {
1778 is_data_inflight
= 1;
1779 DBG("Data is still in flight for stream %" PRIu64
,
1780 stream
->stream_handle
);
1781 pthread_mutex_unlock(&stream
->lock
);
1786 pthread_mutex_unlock(&stream
->lock
);
1791 memset(&reply
, 0, sizeof(reply
));
1792 /* All good, send back reply. */
1793 reply
.ret_code
= htobe32(is_data_inflight
);
1795 ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
, sizeof(reply
), 0);
1797 ERR("Relay end data pending send reply failed");
1805 * Receive an index for a specific stream.
1807 * Return 0 on success else a negative value.
1809 static int relay_recv_index(struct lttcomm_relayd_hdr
*recv_hdr
,
1810 struct relay_connection
*conn
)
1813 struct relay_session
*session
= conn
->session
;
1814 struct lttcomm_relayd_index index_info
;
1815 struct relay_index
*index
;
1816 struct lttcomm_relayd_generic_reply reply
;
1817 struct relay_stream
*stream
;
1818 uint64_t net_seq_num
;
1822 DBG("Relay receiving index");
1824 if (!session
|| conn
->version_check_done
== 0) {
1825 ERR("Trying to close a stream before version check");
1827 goto end_no_session
;
1830 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, &index_info
,
1831 sizeof(index_info
), 0);
1832 if (ret
< sizeof(index_info
)) {
1834 /* Orderly shutdown. Not necessary to print an error. */
1835 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
1837 ERR("Relay didn't receive valid index struct size : %d", ret
);
1840 goto end_no_session
;
1843 net_seq_num
= be64toh(index_info
.net_seq_num
);
1845 stream
= stream_get_by_id(be64toh(index_info
.relay_stream_id
));
1847 ERR("stream_get_by_id not found");
1851 pthread_mutex_lock(&stream
->lock
);
1853 /* Live beacon handling */
1854 if (index_info
.packet_size
== 0) {
1855 DBG("Received live beacon for stream %" PRIu64
,
1856 stream
->stream_handle
);
1859 * Only flag a stream inactive when it has already
1860 * received data and no indexes are in flight.
1862 if (stream
->index_received_seqcount
> 0
1863 && stream
->indexes_in_flight
== 0) {
1864 stream
->beacon_ts_end
=
1865 be64toh(index_info
.timestamp_end
);
1868 goto end_stream_put
;
1870 stream
->beacon_ts_end
= -1ULL;
1873 if (stream
->ctf_stream_id
== -1ULL) {
1874 stream
->ctf_stream_id
= be64toh(index_info
.stream_id
);
1876 index
= relay_index_get_by_id_or_create(stream
, net_seq_num
);
1879 ERR("relay_index_get_by_id_or_create index NULL");
1880 goto end_stream_put
;
1882 if (set_index_control_data(index
, &index_info
)) {
1883 ERR("set_index_control_data error");
1884 relay_index_put(index
);
1886 goto end_stream_put
;
1888 ret
= relay_index_try_flush(index
);
1890 tracefile_array_commit_seq(stream
->tfa
);
1891 stream
->index_received_seqcount
++;
1892 } else if (ret
> 0) {
1896 ERR("relay_index_try_flush error %d", ret
);
1897 relay_index_put(index
);
1902 pthread_mutex_unlock(&stream
->lock
);
1907 memset(&reply
, 0, sizeof(reply
));
1909 reply
.ret_code
= htobe32(LTTNG_ERR_UNK
);
1911 reply
.ret_code
= htobe32(LTTNG_OK
);
1913 send_ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
, sizeof(reply
), 0);
1915 ERR("Relay sending close index id reply");
1924 * Receive the streams_sent message.
1926 * Return 0 on success else a negative value.
1928 static int relay_streams_sent(struct lttcomm_relayd_hdr
*recv_hdr
,
1929 struct relay_connection
*conn
)
1932 struct lttcomm_relayd_generic_reply reply
;
1936 DBG("Relay receiving streams_sent");
1938 if (!conn
->session
|| conn
->version_check_done
== 0) {
1939 ERR("Trying to close a stream before version check");
1941 goto end_no_session
;
1945 * Publish every pending stream in the connection recv list which are
1946 * now ready to be used by the viewer.
1948 publish_connection_local_streams(conn
);
1950 memset(&reply
, 0, sizeof(reply
));
1951 reply
.ret_code
= htobe32(LTTNG_OK
);
1952 send_ret
= conn
->sock
->ops
->sendmsg(conn
->sock
, &reply
, sizeof(reply
), 0);
1954 ERR("Relay sending sent_stream reply");
1966 * Process the commands received on the control socket
1968 static int relay_process_control(struct lttcomm_relayd_hdr
*recv_hdr
,
1969 struct relay_connection
*conn
)
1973 switch (be32toh(recv_hdr
->cmd
)) {
1974 case RELAYD_CREATE_SESSION
:
1975 ret
= relay_create_session(recv_hdr
, conn
);
1977 case RELAYD_ADD_STREAM
:
1978 ret
= relay_add_stream(recv_hdr
, conn
);
1980 case RELAYD_START_DATA
:
1981 ret
= relay_start(recv_hdr
, conn
);
1983 case RELAYD_SEND_METADATA
:
1984 ret
= relay_recv_metadata(recv_hdr
, conn
);
1986 case RELAYD_VERSION
:
1987 ret
= relay_send_version(recv_hdr
, conn
);
1989 case RELAYD_CLOSE_STREAM
:
1990 ret
= relay_close_stream(recv_hdr
, conn
);
1992 case RELAYD_DATA_PENDING
:
1993 ret
= relay_data_pending(recv_hdr
, conn
);
1995 case RELAYD_QUIESCENT_CONTROL
:
1996 ret
= relay_quiescent_control(recv_hdr
, conn
);
1998 case RELAYD_BEGIN_DATA_PENDING
:
1999 ret
= relay_begin_data_pending(recv_hdr
, conn
);
2001 case RELAYD_END_DATA_PENDING
:
2002 ret
= relay_end_data_pending(recv_hdr
, conn
);
2004 case RELAYD_SEND_INDEX
:
2005 ret
= relay_recv_index(recv_hdr
, conn
);
2007 case RELAYD_STREAMS_SENT
:
2008 ret
= relay_streams_sent(recv_hdr
, conn
);
2010 case RELAYD_UPDATE_SYNC_INFO
:
2012 ERR("Received unknown command (%u)", be32toh(recv_hdr
->cmd
));
2013 relay_unknown_command(conn
);
2023 * Handle index for a data stream.
2025 * Called with the stream lock held.
2027 * Return 0 on success else a negative value.
2029 static int handle_index_data(struct relay_stream
*stream
, uint64_t net_seq_num
,
2033 uint64_t data_offset
;
2034 struct relay_index
*index
;
2036 /* Get data offset because we are about to update the index. */
2037 data_offset
= htobe64(stream
->tracefile_size_current
);
2039 DBG("handle_index_data: stream %" PRIu64
" data offset %" PRIu64
,
2040 stream
->stream_handle
, stream
->tracefile_size_current
);
2043 * Lookup for an existing index for that stream id/sequence
2044 * number. If it exists, the control thread has already received the
2045 * data for it, thus we need to write it to disk.
2047 index
= relay_index_get_by_id_or_create(stream
, net_seq_num
);
2053 if (rotate_index
|| !stream
->index_fd
) {
2056 /* Put ref on previous index_fd. */
2057 if (stream
->index_fd
) {
2058 stream_fd_put(stream
->index_fd
);
2059 stream
->index_fd
= NULL
;
2062 fd
= index_create_file(stream
->path_name
, stream
->channel_name
,
2063 -1, -1, stream
->tracefile_size
,
2064 tracefile_array_get_file_index_head(stream
->tfa
));
2067 /* Put self-ref for this index due to error. */
2068 relay_index_put(index
);
2071 stream
->index_fd
= stream_fd_create(fd
);
2072 if (!stream
->index_fd
) {
2075 PERROR("Error closing FD %d", fd
);
2077 /* Put self-ref for this index due to error. */
2078 relay_index_put(index
);
2079 /* Will put the local ref. */
2084 if (relay_index_set_fd(index
, stream
->index_fd
, data_offset
)) {
2086 /* Put self-ref for this index due to error. */
2087 relay_index_put(index
);
2091 ret
= relay_index_try_flush(index
);
2093 tracefile_array_commit_seq(stream
->tfa
);
2094 stream
->index_received_seqcount
++;
2095 } else if (ret
> 0) {
2099 /* Put self-ref for this index due to error. */
2100 relay_index_put(index
);
2108 * relay_process_data: Process the data received on the data socket
2110 static int relay_process_data(struct relay_connection
*conn
)
2112 int ret
= 0, rotate_index
= 0;
2114 struct relay_stream
*stream
;
2115 struct lttcomm_relayd_data_hdr data_hdr
;
2117 uint64_t net_seq_num
;
2119 struct relay_session
*session
;
2120 bool new_stream
= false;
2122 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, &data_hdr
,
2123 sizeof(struct lttcomm_relayd_data_hdr
), 0);
2126 /* Orderly shutdown. Not necessary to print an error. */
2127 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
2129 ERR("Unable to receive data header on sock %d", conn
->sock
->fd
);
2135 stream_id
= be64toh(data_hdr
.stream_id
);
2136 stream
= stream_get_by_id(stream_id
);
2141 session
= stream
->trace
->session
;
2142 data_size
= be32toh(data_hdr
.data_size
);
2143 if (data_buffer_size
< data_size
) {
2146 tmp_data_ptr
= realloc(data_buffer
, data_size
);
2147 if (!tmp_data_ptr
) {
2148 ERR("Allocating data buffer");
2151 goto end_stream_put
;
2153 data_buffer
= tmp_data_ptr
;
2154 data_buffer_size
= data_size
;
2156 memset(data_buffer
, 0, data_size
);
2158 net_seq_num
= be64toh(data_hdr
.net_seq_num
);
2160 DBG3("Receiving data of size %u for stream id %" PRIu64
" seqnum %" PRIu64
,
2161 data_size
, stream_id
, net_seq_num
);
2162 ret
= conn
->sock
->ops
->recvmsg(conn
->sock
, data_buffer
, data_size
, 0);
2165 /* Orderly shutdown. Not necessary to print an error. */
2166 DBG("Socket %d did an orderly shutdown", conn
->sock
->fd
);
2169 goto end_stream_put
;
2172 pthread_mutex_lock(&stream
->lock
);
2174 /* Check if a rotation is needed. */
2175 if (stream
->tracefile_size
> 0 &&
2176 (stream
->tracefile_size_current
+ data_size
) >
2177 stream
->tracefile_size
) {
2178 uint64_t old_id
, new_id
;
2180 old_id
= tracefile_array_get_file_index_head(stream
->tfa
);
2181 tracefile_array_file_rotate(stream
->tfa
);
2183 /* new_id is updated by utils_rotate_stream_file. */
2186 ret
= utils_rotate_stream_file(stream
->path_name
,
2187 stream
->channel_name
, stream
->tracefile_size
,
2188 stream
->tracefile_count
, -1,
2189 -1, stream
->stream_fd
->fd
,
2190 &new_id
, &stream
->stream_fd
->fd
);
2192 ERR("Rotating stream output file");
2193 goto end_stream_unlock
;
2196 * Reset current size because we just performed a stream
2199 stream
->tracefile_size_current
= 0;
2204 * Index are handled in protocol version 2.4 and above. Also,
2205 * snapshot and index are NOT supported.
2207 if (session
->minor
>= 4 && !session
->snapshot
) {
2208 ret
= handle_index_data(stream
, net_seq_num
, rotate_index
);
2210 goto end_stream_unlock
;
2214 /* Write data to stream output fd. */
2215 size_ret
= lttng_write(stream
->stream_fd
->fd
, data_buffer
, data_size
);
2216 if (size_ret
< data_size
) {
2217 ERR("Relay error writing data to file");
2219 goto end_stream_unlock
;
2222 DBG2("Relay wrote %zd bytes to tracefile for stream id %" PRIu64
,
2223 size_ret
, stream
->stream_handle
);
2225 ret
= write_padding_to_file(stream
->stream_fd
->fd
,
2226 be32toh(data_hdr
.padding_size
));
2228 goto end_stream_unlock
;
2230 stream
->tracefile_size_current
+=
2231 data_size
+ be32toh(data_hdr
.padding_size
);
2232 if (stream
->prev_seq
== -1ULL) {
2236 stream
->prev_seq
= net_seq_num
;
2239 pthread_mutex_unlock(&stream
->lock
);
2241 pthread_mutex_lock(&session
->lock
);
2242 uatomic_set(&session
->new_streams
, 1);
2243 pthread_mutex_unlock(&session
->lock
);
2251 static void cleanup_connection_pollfd(struct lttng_poll_event
*events
, int pollfd
)
2255 (void) lttng_poll_del(events
, pollfd
);
2257 ret
= close(pollfd
);
2259 ERR("Closing pollfd %d", pollfd
);
2263 static void relay_thread_close_connection(struct lttng_poll_event
*events
,
2264 int pollfd
, struct relay_connection
*conn
)
2266 const char *type_str
;
2268 switch (conn
->type
) {
2273 type_str
= "Control";
2275 case RELAY_VIEWER_COMMAND
:
2276 type_str
= "Viewer Command";
2278 case RELAY_VIEWER_NOTIFICATION
:
2279 type_str
= "Viewer Notification";
2282 type_str
= "Unknown";
2284 cleanup_connection_pollfd(events
, pollfd
);
2285 connection_put(conn
);
2286 DBG("%s connection closed with %d", type_str
, pollfd
);
2290 * This thread does the actual work
2292 static void *relay_thread_worker(void *data
)
2294 int ret
, err
= -1, last_seen_data_fd
= -1;
2296 struct lttng_poll_event events
;
2297 struct lttng_ht
*relay_connections_ht
;
2298 struct lttng_ht_iter iter
;
2299 struct lttcomm_relayd_hdr recv_hdr
;
2300 struct relay_connection
*destroy_conn
= NULL
;
2302 DBG("[thread] Relay worker started");
2304 rcu_register_thread();
2306 health_register(health_relayd
, HEALTH_RELAYD_TYPE_WORKER
);
2308 if (testpoint(relayd_thread_worker
)) {
2309 goto error_testpoint
;
2312 health_code_update();
2314 /* table of connections indexed on socket */
2315 relay_connections_ht
= lttng_ht_new(0, LTTNG_HT_TYPE_ULONG
);
2316 if (!relay_connections_ht
) {
2317 goto relay_connections_ht_error
;
2320 ret
= create_thread_poll_set(&events
, 2);
2322 goto error_poll_create
;
2325 ret
= lttng_poll_add(&events
, relay_conn_pipe
[0], LPOLLIN
| LPOLLRDHUP
);
2332 int idx
= -1, i
, seen_control
= 0, last_notdel_data_fd
= -1;
2334 health_code_update();
2336 /* Infinite blocking call, waiting for transmission */
2337 DBG3("Relayd worker thread polling...");
2338 health_poll_entry();
2339 ret
= lttng_poll_wait(&events
, -1);
2343 * Restart interrupted system call.
2345 if (errno
== EINTR
) {
2354 * Process control. The control connection is
2355 * prioritized so we don't starve it with high
2356 * throughput tracing data on the data connection.
2358 for (i
= 0; i
< nb_fd
; i
++) {
2359 /* Fetch once the poll data */
2360 uint32_t revents
= LTTNG_POLL_GETEV(&events
, i
);
2361 int pollfd
= LTTNG_POLL_GETFD(&events
, i
);
2363 health_code_update();
2367 * No activity for this FD (poll
2373 /* Thread quit pipe has been closed. Killing thread. */
2374 ret
= check_thread_quit_pipe(pollfd
, revents
);
2380 /* Inspect the relay conn pipe for new connection */
2381 if (pollfd
== relay_conn_pipe
[0]) {
2382 if (revents
& LPOLLIN
) {
2383 struct relay_connection
*conn
;
2385 ret
= lttng_read(relay_conn_pipe
[0], &conn
, sizeof(conn
));
2389 lttng_poll_add(&events
, conn
->sock
->fd
,
2390 LPOLLIN
| LPOLLRDHUP
);
2391 connection_ht_add(relay_connections_ht
, conn
);
2392 DBG("Connection socket %d added", conn
->sock
->fd
);
2393 } else if (revents
& (LPOLLERR
| LPOLLHUP
| LPOLLRDHUP
)) {
2394 ERR("Relay connection pipe error");
2397 ERR("Unexpected poll events %u for sock %d", revents
, pollfd
);
2401 struct relay_connection
*ctrl_conn
;
2403 ctrl_conn
= connection_get_by_sock(relay_connections_ht
, pollfd
);
2404 /* If not found, there is a synchronization issue. */
2407 if (ctrl_conn
->type
== RELAY_DATA
) {
2408 if (revents
& LPOLLIN
) {
2410 * Flag the last seen data fd not deleted. It will be
2411 * used as the last seen fd if any fd gets deleted in
2414 last_notdel_data_fd
= pollfd
;
2416 goto put_ctrl_connection
;
2418 assert(ctrl_conn
->type
== RELAY_CONTROL
);
2420 if (revents
& LPOLLIN
) {
2421 ret
= ctrl_conn
->sock
->ops
->recvmsg(ctrl_conn
->sock
,
2422 &recv_hdr
, sizeof(recv_hdr
), 0);
2424 /* Connection closed */
2425 relay_thread_close_connection(&events
, pollfd
,
2428 ret
= relay_process_control(&recv_hdr
, ctrl_conn
);
2430 /* Clear the session on error. */
2431 relay_thread_close_connection(&events
,
2436 } else if (revents
& (LPOLLERR
| LPOLLHUP
| LPOLLRDHUP
)) {
2437 relay_thread_close_connection(&events
,
2439 if (last_seen_data_fd
== pollfd
) {
2440 last_seen_data_fd
= last_notdel_data_fd
;
2443 ERR("Unexpected poll events %u for control sock %d",
2445 connection_put(ctrl_conn
);
2448 put_ctrl_connection
:
2449 connection_put(ctrl_conn
);
2454 * The last loop handled a control request, go back to poll to make
2455 * sure we prioritise the control socket.
2461 if (last_seen_data_fd
>= 0) {
2462 for (i
= 0; i
< nb_fd
; i
++) {
2463 int pollfd
= LTTNG_POLL_GETFD(&events
, i
);
2465 health_code_update();
2467 if (last_seen_data_fd
== pollfd
) {
2474 /* Process data connection. */
2475 for (i
= idx
+ 1; i
< nb_fd
; i
++) {
2476 /* Fetch the poll data. */
2477 uint32_t revents
= LTTNG_POLL_GETEV(&events
, i
);
2478 int pollfd
= LTTNG_POLL_GETFD(&events
, i
);
2479 struct relay_connection
*data_conn
;
2481 health_code_update();
2484 /* No activity for this FD (poll implementation). */
2488 /* Skip the command pipe. It's handled in the first loop. */
2489 if (pollfd
== relay_conn_pipe
[0]) {
2493 data_conn
= connection_get_by_sock(relay_connections_ht
, pollfd
);
2495 /* Skip it. Might be removed before. */
2498 if (data_conn
->type
== RELAY_CONTROL
) {
2499 goto put_data_connection
;
2501 assert(data_conn
->type
== RELAY_DATA
);
2503 if (revents
& LPOLLIN
) {
2504 ret
= relay_process_data(data_conn
);
2505 /* Connection closed */
2507 relay_thread_close_connection(&events
, pollfd
,
2510 * Every goto restart call sets the last seen fd where
2511 * here we don't really care since we gracefully
2512 * continue the loop after the connection is deleted.
2515 /* Keep last seen port. */
2516 last_seen_data_fd
= pollfd
;
2517 connection_put(data_conn
);
2520 } else if (revents
& (LPOLLERR
| LPOLLHUP
| LPOLLRDHUP
)) {
2521 relay_thread_close_connection(&events
, pollfd
,
2524 ERR("Unknown poll events %u for data sock %d",
2527 put_data_connection
:
2528 connection_put(data_conn
);
2530 last_seen_data_fd
= -1;
2533 /* Normal exit, no error */
2538 /* Cleanup reamaining connection object. */
2540 cds_lfht_for_each_entry(relay_connections_ht
->ht
, &iter
.iter
,
2543 health_code_update();
2545 * No need to grab another ref, because we own
2548 relay_thread_close_connection(&events
, destroy_conn
->sock
->fd
,
2553 lttng_poll_clean(&events
);
2555 lttng_ht_destroy(relay_connections_ht
);
2556 relay_connections_ht_error
:
2557 /* Close relay conn pipes */
2558 utils_close_pipe(relay_conn_pipe
);
2560 DBG("Thread exited with error");
2562 DBG("Worker thread cleanup complete");
2567 ERR("Health error occurred in %s", __func__
);
2569 health_unregister(health_relayd
);
2570 rcu_unregister_thread();
2571 lttng_relay_stop_threads();
2576 * Create the relay command pipe to wake thread_manage_apps.
2577 * Closed in cleanup().
2579 static int create_relay_conn_pipe(void)
2583 ret
= utils_create_pipe_cloexec(relay_conn_pipe
);
2591 int main(int argc
, char **argv
)
2593 int ret
= 0, retval
= 0;
2596 /* Parse arguments */
2598 if (set_options(argc
, argv
)) {
2603 if (set_signal_handler()) {
2608 /* Try to create directory if -o, --output is specified. */
2609 if (opt_output_path
) {
2610 if (*opt_output_path
!= '/') {
2611 ERR("Please specify an absolute path for -o, --output PATH");
2616 ret
= utils_mkdir_recursive(opt_output_path
, S_IRWXU
| S_IRWXG
,
2619 ERR("Unable to create %s", opt_output_path
);
2626 if (opt_daemon
|| opt_background
) {
2629 ret
= lttng_daemonize(&child_ppid
, &recv_child_signal
,
2637 * We are in the child. Make sure all other file
2638 * descriptors are closed, in case we are called with
2639 * more opened file descriptors than the standard ones.
2641 for (i
= 3; i
< sysconf(_SC_OPEN_MAX
); i
++) {
2647 /* Initialize thread health monitoring */
2648 health_relayd
= health_app_create(NR_HEALTH_RELAYD_TYPES
);
2649 if (!health_relayd
) {
2650 PERROR("health_app_create error");
2652 goto exit_health_app_create
;
2655 /* Create thread quit pipe */
2656 if (init_thread_quit_pipe()) {
2658 goto exit_init_data
;
2661 /* Check if daemon is UID = 0 */
2663 if (control_uri
->port
< 1024 || data_uri
->port
< 1024 || live_uri
->port
< 1024) {
2664 ERR("Need to be root to use ports < 1024");
2666 goto exit_init_data
;
2670 /* Setup the thread apps communication pipe. */
2671 if (create_relay_conn_pipe()) {
2673 goto exit_init_data
;
2676 /* Init relay command queue. */
2677 cds_wfcq_init(&relay_conn_queue
.head
, &relay_conn_queue
.tail
);
2679 /* Set up max poll set size */
2680 lttng_poll_set_max_size();
2682 /* Initialize communication library */
2684 lttcomm_inet_init();
2686 /* tables of sessions indexed by session ID */
2687 sessions_ht
= lttng_ht_new(0, LTTNG_HT_TYPE_U64
);
2690 goto exit_init_data
;
2693 /* tables of streams indexed by stream ID */
2694 relay_streams_ht
= lttng_ht_new(0, LTTNG_HT_TYPE_U64
);
2695 if (!relay_streams_ht
) {
2697 goto exit_init_data
;
2700 /* tables of streams indexed by stream ID */
2701 viewer_streams_ht
= lttng_ht_new(0, LTTNG_HT_TYPE_U64
);
2702 if (!viewer_streams_ht
) {
2704 goto exit_init_data
;
2707 ret
= utils_create_pipe(health_quit_pipe
);
2710 goto exit_health_quit_pipe
;
2713 /* Create thread to manage the client socket */
2714 ret
= pthread_create(&health_thread
, NULL
,
2715 thread_manage_health
, (void *) NULL
);
2718 PERROR("pthread_create health");
2720 goto exit_health_thread
;
2723 /* Setup the dispatcher thread */
2724 ret
= pthread_create(&dispatcher_thread
, NULL
,
2725 relay_thread_dispatcher
, (void *) NULL
);
2728 PERROR("pthread_create dispatcher");
2730 goto exit_dispatcher_thread
;
2733 /* Setup the worker thread */
2734 ret
= pthread_create(&worker_thread
, NULL
,
2735 relay_thread_worker
, NULL
);
2738 PERROR("pthread_create worker");
2740 goto exit_worker_thread
;
2743 /* Setup the listener thread */
2744 ret
= pthread_create(&listener_thread
, NULL
,
2745 relay_thread_listener
, (void *) NULL
);
2748 PERROR("pthread_create listener");
2750 goto exit_listener_thread
;
2753 ret
= relayd_live_create(live_uri
);
2755 ERR("Starting live viewer threads");
2761 * This is where we start awaiting program completion (e.g. through
2762 * signal that asks threads to teardown).
2765 ret
= relayd_live_join();
2771 ret
= pthread_join(listener_thread
, &status
);
2774 PERROR("pthread_join listener_thread");
2778 exit_listener_thread
:
2779 ret
= pthread_join(worker_thread
, &status
);
2782 PERROR("pthread_join worker_thread");
2787 ret
= pthread_join(dispatcher_thread
, &status
);
2790 PERROR("pthread_join dispatcher_thread");
2793 exit_dispatcher_thread
:
2795 ret
= pthread_join(health_thread
, &status
);
2798 PERROR("pthread_join health_thread");
2803 utils_close_pipe(health_quit_pipe
);
2804 exit_health_quit_pipe
:
2807 health_app_destroy(health_relayd
);
2808 exit_health_app_create
:
2812 /* Ensure all prior call_rcu are done. */