2 * ring_buffer_frontend.c
4 * (C) Copyright 2005-2010 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
6 * Ring buffer wait-free buffer synchronization. Producer-consumer and flight
7 * recorder (overwrite) modes. See thesis:
9 * Desnoyers, Mathieu (2009), "Low-Impact Operating System Tracing", Ph.D.
10 * dissertation, Ecole Polytechnique de Montreal.
11 * http://www.lttng.org/pub/thesis/desnoyers-dissertation-2009-12.pdf
13 * - Algorithm presentation in Chapter 5:
14 * "Lockless Multi-Core High-Throughput Buffering".
15 * - Algorithm formal verification in Section 8.6:
16 * "Formal verification of LTTng"
19 * Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
21 * Inspired from LTT and RelayFS:
22 * Karim Yaghmour <karim@opersys.com>
23 * Tom Zanussi <zanussi@us.ibm.com>
24 * Bob Wisniewski <bob@watson.ibm.com>
26 * Bob Wisniewski <bob@watson.ibm.com>
28 * Buffer reader semantic :
31 * while buffer is not finalized and empty
33 * - if return value != 0, continue
34 * - splice one subbuffer worth of data to a pipe
35 * - splice the data from pipe to disk/network
38 * Dual LGPL v2.1/GPL v2 license.
41 #include <sys/types.h>
45 #include <urcu/compiler.h>
49 #include <lttng/ringbuffer-config.h>
55 #define max(a, b) ((a) > (b) ? (a) : (b))
59 * Use POSIX SHM: shm_open(3) and shm_unlink(3).
60 * close(2) to close the fd returned by shm_open.
61 * shm_unlink releases the shared memory object name.
62 * ftruncate(2) sets the size of the memory object.
63 * mmap/munmap maps the shared memory obj to a virtual address in the
64 * calling proceess (should be done both in libust and consumer).
65 * See shm_overview(7) for details.
66 * Pass file descriptor returned by shm_open(3) to ltt-sessiond through
69 * Since we don't need to access the object using its name, we can
70 * immediately shm_unlink(3) it, and only keep the handle with its file
75 * Internal structure representing offsets to use at a sub-buffer switch.
77 struct switch_offsets
{
78 unsigned long begin
, end
, old
;
79 size_t pre_header_padding
, size
;
80 unsigned int switch_new_start
:1, switch_new_end
:1, switch_old_start
:1,
84 __thread
unsigned int lib_ring_buffer_nesting
;
87 void lib_ring_buffer_print_errors(struct channel
*chan
,
88 struct lttng_ust_lib_ring_buffer
*buf
, int cpu
,
89 struct lttng_ust_shm_handle
*handle
);
92 * Must be called under cpu hotplug protection.
94 void lib_ring_buffer_free(struct lttng_ust_lib_ring_buffer
*buf
,
95 struct lttng_ust_shm_handle
*handle
)
97 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
99 lib_ring_buffer_print_errors(chan
, buf
, buf
->backend
.cpu
, handle
);
100 /* buf->commit_hot will be freed by shm teardown */
101 /* buf->commit_cold will be freed by shm teardown */
103 lib_ring_buffer_backend_free(&buf
->backend
);
107 * lib_ring_buffer_reset - Reset ring buffer to initial values.
110 * Effectively empty the ring buffer. Should be called when the buffer is not
111 * used for writing. The ring buffer can be opened for reading, but the reader
112 * should not be using the iterator concurrently with reset. The previous
113 * current iterator record is reset.
115 void lib_ring_buffer_reset(struct lttng_ust_lib_ring_buffer
*buf
,
116 struct lttng_ust_shm_handle
*handle
)
118 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
119 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
123 * Reset iterator first. It will put the subbuffer if it currently holds
126 v_set(config
, &buf
->offset
, 0);
127 for (i
= 0; i
< chan
->backend
.num_subbuf
; i
++) {
128 v_set(config
, &shmp_index(handle
, buf
->commit_hot
, i
)->cc
, 0);
129 v_set(config
, &shmp_index(handle
, buf
->commit_hot
, i
)->seq
, 0);
130 v_set(config
, &shmp_index(handle
, buf
->commit_cold
, i
)->cc_sb
, 0);
132 uatomic_set(&buf
->consumed
, 0);
133 uatomic_set(&buf
->record_disabled
, 0);
134 v_set(config
, &buf
->last_tsc
, 0);
135 lib_ring_buffer_backend_reset(&buf
->backend
, handle
);
136 /* Don't reset number of active readers */
137 v_set(config
, &buf
->records_lost_full
, 0);
138 v_set(config
, &buf
->records_lost_wrap
, 0);
139 v_set(config
, &buf
->records_lost_big
, 0);
140 v_set(config
, &buf
->records_count
, 0);
141 v_set(config
, &buf
->records_overrun
, 0);
146 * channel_reset - Reset channel to initial values.
149 * Effectively empty the channel. Should be called when the channel is not used
150 * for writing. The channel can be opened for reading, but the reader should not
151 * be using the iterator concurrently with reset. The previous current iterator
154 void channel_reset(struct channel
*chan
)
157 * Reset iterators first. Will put the subbuffer if held for reading.
159 uatomic_set(&chan
->record_disabled
, 0);
160 /* Don't reset commit_count_mask, still valid */
161 channel_backend_reset(&chan
->backend
);
162 /* Don't reset switch/read timer interval */
163 /* Don't reset notifiers and notifier enable bits */
164 /* Don't reset reader reference count */
168 * Must be called under cpu hotplug protection.
170 int lib_ring_buffer_create(struct lttng_ust_lib_ring_buffer
*buf
,
171 struct channel_backend
*chanb
, int cpu
,
172 struct lttng_ust_shm_handle
*handle
,
173 struct shm_object
*shmobj
)
175 const struct lttng_ust_lib_ring_buffer_config
*config
= &chanb
->config
;
176 struct channel
*chan
= caa_container_of(chanb
, struct channel
, backend
);
177 void *priv
= channel_get_private(chan
);
178 unsigned int num_subbuf
;
179 size_t subbuf_header_size
;
183 /* Test for cpu hotplug */
184 if (buf
->backend
.allocated
)
187 ret
= lib_ring_buffer_backend_create(&buf
->backend
, &chan
->backend
,
188 cpu
, handle
, shmobj
);
192 align_shm(shmobj
, __alignof__(struct commit_counters_hot
));
193 set_shmp(buf
->commit_hot
,
195 sizeof(struct commit_counters_hot
) * chan
->backend
.num_subbuf
));
196 if (!shmp(handle
, buf
->commit_hot
)) {
201 align_shm(shmobj
, __alignof__(struct commit_counters_cold
));
202 set_shmp(buf
->commit_cold
,
204 sizeof(struct commit_counters_cold
) * chan
->backend
.num_subbuf
));
205 if (!shmp(handle
, buf
->commit_cold
)) {
210 num_subbuf
= chan
->backend
.num_subbuf
;
211 //init_waitqueue_head(&buf->read_wait);
214 * Write the subbuffer header for first subbuffer so we know the total
215 * duration of data gathering.
217 subbuf_header_size
= config
->cb
.subbuffer_header_size();
218 v_set(config
, &buf
->offset
, subbuf_header_size
);
219 subbuffer_id_clear_noref(config
, &shmp_index(handle
, buf
->backend
.buf_wsb
, 0)->id
);
220 tsc
= config
->cb
.ring_buffer_clock_read(shmp(handle
, buf
->backend
.chan
));
221 config
->cb
.buffer_begin(buf
, tsc
, 0, handle
);
222 v_add(config
, subbuf_header_size
, &shmp_index(handle
, buf
->commit_hot
, 0)->cc
);
224 if (config
->cb
.buffer_create
) {
225 ret
= config
->cb
.buffer_create(buf
, priv
, cpu
, chanb
->name
, handle
);
229 buf
->backend
.allocated
= 1;
234 /* commit_cold will be freed by shm teardown */
236 /* commit_hot will be freed by shm teardown */
238 lib_ring_buffer_backend_free(&buf
->backend
);
243 static void switch_buffer_timer(unsigned long data
)
245 struct lttng_ust_lib_ring_buffer
*buf
= (struct lttng_ust_lib_ring_buffer
*)data
;
246 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
247 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
250 * Only flush buffers periodically if readers are active.
252 if (uatomic_read(&buf
->active_readers
) || uatomic_read(&buf
->active_shadow_readers
))
253 lib_ring_buffer_switch_slow(buf
, SWITCH_ACTIVE
, handle
);
256 //if (config->alloc == RING_BUFFER_ALLOC_PER_CPU)
257 // mod_timer_pinned(&buf->switch_timer,
258 // jiffies + chan->switch_timer_interval);
260 // mod_timer(&buf->switch_timer,
261 // jiffies + chan->switch_timer_interval);
265 static void lib_ring_buffer_start_switch_timer(struct lttng_ust_lib_ring_buffer
*buf
,
266 struct lttng_ust_shm_handle
*handle
)
268 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
269 //const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config;
271 if (!chan
->switch_timer_interval
|| buf
->switch_timer_enabled
)
274 //init_timer(&buf->switch_timer);
275 //buf->switch_timer.function = switch_buffer_timer;
276 //buf->switch_timer.expires = jiffies + chan->switch_timer_interval;
277 //buf->switch_timer.data = (unsigned long)buf;
278 //if (config->alloc == RING_BUFFER_ALLOC_PER_CPU)
279 // add_timer_on(&buf->switch_timer, buf->backend.cpu);
281 // add_timer(&buf->switch_timer);
282 buf
->switch_timer_enabled
= 1;
285 static void lib_ring_buffer_stop_switch_timer(struct lttng_ust_lib_ring_buffer
*buf
,
286 struct lttng_ust_shm_handle
*handle
)
288 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
290 if (!chan
->switch_timer_interval
|| !buf
->switch_timer_enabled
)
294 //del_timer_sync(&buf->switch_timer);
295 buf
->switch_timer_enabled
= 0;
300 * Polling timer to check the channels for data.
302 static void read_buffer_timer(unsigned long data
)
304 struct lttng_ust_lib_ring_buffer
*buf
= (struct lttng_ust_lib_ring_buffer
*)data
;
305 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
306 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
308 CHAN_WARN_ON(chan
, !buf
->backend
.allocated
);
310 if (uatomic_read(&buf
->active_readers
) || uatomic_read(&buf
->active_shadow_readers
))
311 && lib_ring_buffer_poll_deliver(config
, buf
, chan
)) {
313 //wake_up_interruptible(&buf->read_wait);
314 //wake_up_interruptible(&chan->read_wait);
318 //if (config->alloc == RING_BUFFER_ALLOC_PER_CPU)
319 // mod_timer_pinned(&buf->read_timer,
320 // jiffies + chan->read_timer_interval);
322 // mod_timer(&buf->read_timer,
323 // jiffies + chan->read_timer_interval);
327 static void lib_ring_buffer_start_read_timer(struct lttng_ust_lib_ring_buffer
*buf
,
328 struct lttng_ust_shm_handle
*handle
)
330 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
331 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
333 if (config
->wakeup
!= RING_BUFFER_WAKEUP_BY_TIMER
334 || !chan
->read_timer_interval
335 || buf
->read_timer_enabled
)
339 //init_timer(&buf->read_timer);
340 //buf->read_timer.function = read_buffer_timer;
341 //buf->read_timer.expires = jiffies + chan->read_timer_interval;
342 //buf->read_timer.data = (unsigned long)buf;
344 //if (config->alloc == RING_BUFFER_ALLOC_PER_CPU)
345 // add_timer_on(&buf->read_timer, buf->backend.cpu);
347 // add_timer(&buf->read_timer);
348 buf
->read_timer_enabled
= 1;
351 static void lib_ring_buffer_stop_read_timer(struct lttng_ust_lib_ring_buffer
*buf
,
352 struct lttng_ust_shm_handle
*handle
)
354 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
355 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
357 if (config
->wakeup
!= RING_BUFFER_WAKEUP_BY_TIMER
358 || !chan
->read_timer_interval
359 || !buf
->read_timer_enabled
)
363 //del_timer_sync(&buf->read_timer);
365 * do one more check to catch data that has been written in the last
368 if (lib_ring_buffer_poll_deliver(config
, buf
, chan
, handle
)) {
370 //wake_up_interruptible(&buf->read_wait);
371 //wake_up_interruptible(&chan->read_wait);
373 buf
->read_timer_enabled
= 0;
376 static void channel_unregister_notifiers(struct channel
*chan
,
377 struct lttng_ust_shm_handle
*handle
)
379 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
382 if (config
->alloc
== RING_BUFFER_ALLOC_PER_CPU
) {
383 for_each_possible_cpu(cpu
) {
384 struct lttng_ust_lib_ring_buffer
*buf
= shmp(handle
, chan
->backend
.buf
[cpu
].shmp
);
386 lib_ring_buffer_stop_switch_timer(buf
, handle
);
387 lib_ring_buffer_stop_read_timer(buf
, handle
);
390 struct lttng_ust_lib_ring_buffer
*buf
= shmp(handle
, chan
->backend
.buf
[0].shmp
);
392 lib_ring_buffer_stop_switch_timer(buf
, handle
);
393 lib_ring_buffer_stop_read_timer(buf
, handle
);
395 //channel_backend_unregister_notifiers(&chan->backend);
398 static void channel_free(struct channel
*chan
, struct lttng_ust_shm_handle
*handle
,
402 channel_backend_free(&chan
->backend
, handle
);
403 /* chan is freed by shm teardown */
404 shm_object_table_destroy(handle
->table
);
409 * channel_create - Create channel.
410 * @config: ring buffer instance configuration
411 * @name: name of the channel
412 * @priv_data: ring buffer client private data area pointer (output)
413 * @priv_data_size: length, in bytes, of the private data area.
414 * @priv_data_init: initialization data for private data.
415 * @buf_addr: pointer the the beginning of the preallocated buffer contiguous
416 * address mapping. It is used only by RING_BUFFER_STATIC
417 * configuration. It can be set to NULL for other backends.
418 * @subbuf_size: subbuffer size
419 * @num_subbuf: number of subbuffers
420 * @switch_timer_interval: Time interval (in us) to fill sub-buffers with
421 * padding to let readers get those sub-buffers.
422 * Used for live streaming.
423 * @read_timer_interval: Time interval (in us) to wake up pending readers.
426 * Returns NULL on failure.
428 struct lttng_ust_shm_handle
*channel_create(const struct lttng_ust_lib_ring_buffer_config
*config
,
431 size_t priv_data_align
,
432 size_t priv_data_size
,
433 void *priv_data_init
,
434 void *buf_addr
, size_t subbuf_size
,
435 size_t num_subbuf
, unsigned int switch_timer_interval
,
436 unsigned int read_timer_interval
,
437 int *shm_fd
, int *wait_fd
, uint64_t *memory_map_size
)
440 size_t shmsize
, chansize
;
441 struct channel
*chan
;
442 struct lttng_ust_shm_handle
*handle
;
443 struct shm_object
*shmobj
;
446 if (lib_ring_buffer_check_config(config
, switch_timer_interval
,
447 read_timer_interval
))
450 handle
= zmalloc(sizeof(struct lttng_ust_shm_handle
));
454 /* Allocate table for channel + per-cpu buffers */
455 handle
->table
= shm_object_table_create(1 + num_possible_cpus());
457 goto error_table_alloc
;
459 /* Calculate the shm allocation layout */
460 shmsize
= sizeof(struct channel
);
461 shmsize
+= offset_align(shmsize
, __alignof__(struct lttng_ust_lib_ring_buffer_shmp
));
462 if (config
->alloc
== RING_BUFFER_ALLOC_PER_CPU
)
463 shmsize
+= sizeof(struct lttng_ust_lib_ring_buffer_shmp
) * num_possible_cpus();
465 shmsize
+= sizeof(struct lttng_ust_lib_ring_buffer_shmp
);
467 shmsize
+= offset_align(shmsize
, priv_data_align
);
468 shmsize
+= priv_data_size
;
470 shmobj
= shm_object_table_append(handle
->table
, shmsize
);
473 /* struct channel is at object 0, offset 0 (hardcoded) */
474 set_shmp(handle
->chan
, zalloc_shm(shmobj
, chansize
));
475 assert(handle
->chan
._ref
.index
== 0);
476 assert(handle
->chan
._ref
.offset
== 0);
477 chan
= shmp(handle
, handle
->chan
);
481 /* space for private data */
482 if (priv_data_size
) {
483 DECLARE_SHMP(void, priv_data_alloc
);
485 align_shm(shmobj
, priv_data_align
);
486 chan
->priv_data_offset
= shmobj
->allocated_len
;
487 set_shmp(priv_data_alloc
, zalloc_shm(shmobj
, priv_data_size
));
488 if (!shmp(handle
, priv_data_alloc
))
490 *priv_data
= channel_get_private(chan
);
491 memcpy(*priv_data
, priv_data_init
, priv_data_size
);
493 chan
->priv_data_offset
= -1;
497 ret
= channel_backend_init(&chan
->backend
, name
, config
,
498 subbuf_size
, num_subbuf
, handle
);
500 goto error_backend_init
;
502 chan
->commit_count_mask
= (~0UL >> chan
->backend
.num_subbuf_order
);
504 //chan->switch_timer_interval = usecs_to_jiffies(switch_timer_interval);
505 //chan->read_timer_interval = usecs_to_jiffies(read_timer_interval);
507 //init_waitqueue_head(&chan->read_wait);
508 //init_waitqueue_head(&chan->hp_wait);
510 if (config
->alloc
== RING_BUFFER_ALLOC_PER_CPU
) {
512 * In case of non-hotplug cpu, if the ring-buffer is allocated
513 * in early initcall, it will not be notified of secondary cpus.
514 * In that off case, we need to allocate for all possible cpus.
516 for_each_possible_cpu(cpu
) {
517 struct lttng_ust_lib_ring_buffer
*buf
= shmp(handle
, chan
->backend
.buf
[cpu
].shmp
);
518 lib_ring_buffer_start_switch_timer(buf
, handle
);
519 lib_ring_buffer_start_read_timer(buf
, handle
);
522 struct lttng_ust_lib_ring_buffer
*buf
= shmp(handle
, chan
->backend
.buf
[0].shmp
);
524 lib_ring_buffer_start_switch_timer(buf
, handle
);
525 lib_ring_buffer_start_read_timer(buf
, handle
);
527 ref
= &handle
->chan
._ref
;
528 shm_get_object_data(handle
, ref
, shm_fd
, wait_fd
, memory_map_size
);
533 shm_object_table_destroy(handle
->table
);
539 struct lttng_ust_shm_handle
*channel_handle_create(int shm_fd
, int wait_fd
,
540 uint64_t memory_map_size
)
542 struct lttng_ust_shm_handle
*handle
;
543 struct shm_object
*object
;
545 handle
= zmalloc(sizeof(struct lttng_ust_shm_handle
));
549 /* Allocate table for channel + per-cpu buffers */
550 handle
->table
= shm_object_table_create(1 + num_possible_cpus());
552 goto error_table_alloc
;
553 /* Add channel object */
554 object
= shm_object_table_append_shadow(handle
->table
,
555 shm_fd
, wait_fd
, memory_map_size
);
557 goto error_table_object
;
558 /* struct channel is at object 0, offset 0 (hardcoded) */
559 handle
->chan
._ref
.index
= 0;
560 handle
->chan
._ref
.offset
= 0;
564 shm_object_table_destroy(handle
->table
);
570 int channel_handle_add_stream(struct lttng_ust_shm_handle
*handle
,
571 int shm_fd
, int wait_fd
, uint64_t memory_map_size
)
573 struct shm_object
*object
;
575 /* Add stream object */
576 object
= shm_object_table_append_shadow(handle
->table
,
577 shm_fd
, wait_fd
, memory_map_size
);
584 void channel_release(struct channel
*chan
, struct lttng_ust_shm_handle
*handle
,
587 channel_free(chan
, handle
, shadow
);
591 * channel_destroy - Finalize, wait for q.s. and destroy channel.
592 * @chan: channel to destroy
595 * Call "destroy" callback, finalize channels, decrement the channel
596 * reference count. Note that when readers have completed data
597 * consumption of finalized channels, get_subbuf() will return -ENODATA.
598 * They should release their handle at that point.
600 void channel_destroy(struct channel
*chan
, struct lttng_ust_shm_handle
*handle
,
603 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
607 channel_release(chan
, handle
, shadow
);
611 channel_unregister_notifiers(chan
, handle
);
613 if (config
->alloc
== RING_BUFFER_ALLOC_PER_CPU
) {
614 for_each_channel_cpu(cpu
, chan
) {
615 struct lttng_ust_lib_ring_buffer
*buf
= shmp(handle
, chan
->backend
.buf
[cpu
].shmp
);
617 if (config
->cb
.buffer_finalize
)
618 config
->cb
.buffer_finalize(buf
,
619 channel_get_private(chan
),
621 if (buf
->backend
.allocated
)
622 lib_ring_buffer_switch_slow(buf
, SWITCH_FLUSH
,
625 * Perform flush before writing to finalized.
628 CMM_ACCESS_ONCE(buf
->finalized
) = 1;
629 //wake_up_interruptible(&buf->read_wait);
632 struct lttng_ust_lib_ring_buffer
*buf
= shmp(handle
, chan
->backend
.buf
[0].shmp
);
634 if (config
->cb
.buffer_finalize
)
635 config
->cb
.buffer_finalize(buf
, channel_get_private(chan
), -1, handle
);
636 if (buf
->backend
.allocated
)
637 lib_ring_buffer_switch_slow(buf
, SWITCH_FLUSH
,
640 * Perform flush before writing to finalized.
643 CMM_ACCESS_ONCE(buf
->finalized
) = 1;
644 //wake_up_interruptible(&buf->read_wait);
646 CMM_ACCESS_ONCE(chan
->finalized
) = 1;
647 //wake_up_interruptible(&chan->hp_wait);
648 //wake_up_interruptible(&chan->read_wait);
650 * sessiond/consumer are keeping a reference on the shm file
651 * descriptor directly. No need to refcount.
653 channel_release(chan
, handle
, shadow
);
657 struct lttng_ust_lib_ring_buffer
*channel_get_ring_buffer(
658 const struct lttng_ust_lib_ring_buffer_config
*config
,
659 struct channel
*chan
, int cpu
,
660 struct lttng_ust_shm_handle
*handle
,
661 int *shm_fd
, int *wait_fd
,
662 uint64_t *memory_map_size
)
666 if (config
->alloc
== RING_BUFFER_ALLOC_GLOBAL
) {
667 ref
= &chan
->backend
.buf
[0].shmp
._ref
;
668 shm_get_object_data(handle
, ref
, shm_fd
, wait_fd
,
670 return shmp(handle
, chan
->backend
.buf
[0].shmp
);
672 if (cpu
>= num_possible_cpus())
674 ref
= &chan
->backend
.buf
[cpu
].shmp
._ref
;
675 shm_get_object_data(handle
, ref
, shm_fd
, wait_fd
,
677 return shmp(handle
, chan
->backend
.buf
[cpu
].shmp
);
681 int lib_ring_buffer_open_read(struct lttng_ust_lib_ring_buffer
*buf
,
682 struct lttng_ust_shm_handle
*handle
,
686 if (uatomic_cmpxchg(&buf
->active_shadow_readers
, 0, 1) != 0)
691 if (uatomic_cmpxchg(&buf
->active_readers
, 0, 1) != 0)
697 void lib_ring_buffer_release_read(struct lttng_ust_lib_ring_buffer
*buf
,
698 struct lttng_ust_shm_handle
*handle
,
701 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
704 CHAN_WARN_ON(chan
, uatomic_read(&buf
->active_shadow_readers
) != 1);
706 uatomic_dec(&buf
->active_shadow_readers
);
709 CHAN_WARN_ON(chan
, uatomic_read(&buf
->active_readers
) != 1);
711 uatomic_dec(&buf
->active_readers
);
715 * lib_ring_buffer_snapshot - save subbuffer position snapshot (for read)
717 * @consumed: consumed count indicating the position where to read
718 * @produced: produced count, indicates position when to stop reading
720 * Returns -ENODATA if buffer is finalized, -EAGAIN if there is currently no
721 * data to read at consumed position, or 0 if the get operation succeeds.
724 int lib_ring_buffer_snapshot(struct lttng_ust_lib_ring_buffer
*buf
,
725 unsigned long *consumed
, unsigned long *produced
,
726 struct lttng_ust_shm_handle
*handle
)
728 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
729 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
730 unsigned long consumed_cur
, write_offset
;
733 finalized
= CMM_ACCESS_ONCE(buf
->finalized
);
735 * Read finalized before counters.
738 consumed_cur
= uatomic_read(&buf
->consumed
);
740 * No need to issue a memory barrier between consumed count read and
741 * write offset read, because consumed count can only change
742 * concurrently in overwrite mode, and we keep a sequence counter
743 * identifier derived from the write offset to check we are getting
744 * the same sub-buffer we are expecting (the sub-buffers are atomically
745 * "tagged" upon writes, tags are checked upon read).
747 write_offset
= v_read(config
, &buf
->offset
);
750 * Check that we are not about to read the same subbuffer in
751 * which the writer head is.
753 if (subbuf_trunc(write_offset
, chan
) - subbuf_trunc(consumed_cur
, chan
)
757 *consumed
= consumed_cur
;
758 *produced
= subbuf_trunc(write_offset
, chan
);
764 * The memory barriers __wait_event()/wake_up_interruptible() take care
765 * of "raw_spin_is_locked" memory ordering.
774 * lib_ring_buffer_put_snapshot - move consumed counter forward
776 * @consumed_new: new consumed count value
778 void lib_ring_buffer_move_consumer(struct lttng_ust_lib_ring_buffer
*buf
,
779 unsigned long consumed_new
,
780 struct lttng_ust_shm_handle
*handle
)
782 struct lttng_ust_lib_ring_buffer_backend
*bufb
= &buf
->backend
;
783 struct channel
*chan
= shmp(handle
, bufb
->chan
);
784 unsigned long consumed
;
786 CHAN_WARN_ON(chan
, uatomic_read(&buf
->active_readers
) != 1
787 && uatomic_read(&buf
->active_shadow_readers
) != 1);
790 * Only push the consumed value forward.
791 * If the consumed cmpxchg fails, this is because we have been pushed by
792 * the writer in flight recorder mode.
794 consumed
= uatomic_read(&buf
->consumed
);
795 while ((long) consumed
- (long) consumed_new
< 0)
796 consumed
= uatomic_cmpxchg(&buf
->consumed
, consumed
,
801 * lib_ring_buffer_get_subbuf - get exclusive access to subbuffer for reading
803 * @consumed: consumed count indicating the position where to read
805 * Returns -ENODATA if buffer is finalized, -EAGAIN if there is currently no
806 * data to read at consumed position, or 0 if the get operation succeeds.
808 int lib_ring_buffer_get_subbuf(struct lttng_ust_lib_ring_buffer
*buf
,
809 unsigned long consumed
,
810 struct lttng_ust_shm_handle
*handle
)
812 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
813 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
814 unsigned long consumed_cur
, consumed_idx
, commit_count
, write_offset
;
819 finalized
= CMM_ACCESS_ONCE(buf
->finalized
);
821 * Read finalized before counters.
824 consumed_cur
= uatomic_read(&buf
->consumed
);
825 consumed_idx
= subbuf_index(consumed
, chan
);
826 commit_count
= v_read(config
, &shmp_index(handle
, buf
->commit_cold
, consumed_idx
)->cc_sb
);
828 * Make sure we read the commit count before reading the buffer
829 * data and the write offset. Correct consumed offset ordering
830 * wrt commit count is insured by the use of cmpxchg to update
831 * the consumed offset.
834 * Local rmb to match the remote wmb to read the commit count
835 * before the buffer data and the write offset.
839 write_offset
= v_read(config
, &buf
->offset
);
842 * Check that the buffer we are getting is after or at consumed_cur
845 if ((long) subbuf_trunc(consumed
, chan
)
846 - (long) subbuf_trunc(consumed_cur
, chan
) < 0)
850 * Check that the subbuffer we are trying to consume has been
851 * already fully committed.
853 if (((commit_count
- chan
->backend
.subbuf_size
)
854 & chan
->commit_count_mask
)
855 - (buf_trunc(consumed_cur
, chan
)
856 >> chan
->backend
.num_subbuf_order
)
861 * Check that we are not about to read the same subbuffer in
862 * which the writer head is.
864 if (subbuf_trunc(write_offset
, chan
) - subbuf_trunc(consumed_cur
, chan
)
869 * Failure to get the subbuffer causes a busy-loop retry without going
870 * to a wait queue. These are caused by short-lived race windows where
871 * the writer is getting access to a subbuffer we were trying to get
872 * access to. Also checks that the "consumed" buffer count we are
873 * looking for matches the one contained in the subbuffer id.
875 ret
= update_read_sb_index(config
, &buf
->backend
, &chan
->backend
,
876 consumed_idx
, buf_trunc_val(consumed
, chan
),
880 subbuffer_id_clear_noref(config
, &buf
->backend
.buf_rsb
.id
);
882 buf
->get_subbuf_consumed
= consumed
;
889 * The memory barriers __wait_event()/wake_up_interruptible() take care
890 * of "raw_spin_is_locked" memory ordering.
899 * lib_ring_buffer_put_subbuf - release exclusive subbuffer access
902 void lib_ring_buffer_put_subbuf(struct lttng_ust_lib_ring_buffer
*buf
,
903 struct lttng_ust_shm_handle
*handle
)
905 struct lttng_ust_lib_ring_buffer_backend
*bufb
= &buf
->backend
;
906 struct channel
*chan
= shmp(handle
, bufb
->chan
);
907 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
908 unsigned long read_sb_bindex
, consumed_idx
, consumed
;
910 CHAN_WARN_ON(chan
, uatomic_read(&buf
->active_readers
) != 1
911 && uatomic_read(&buf
->active_shadow_readers
) != 1);
913 if (!buf
->get_subbuf
) {
915 * Reader puts a subbuffer it did not get.
917 CHAN_WARN_ON(chan
, 1);
920 consumed
= buf
->get_subbuf_consumed
;
924 * Clear the records_unread counter. (overruns counter)
925 * Can still be non-zero if a file reader simply grabbed the data
926 * without using iterators.
927 * Can be below zero if an iterator is used on a snapshot more than
930 read_sb_bindex
= subbuffer_id_get_index(config
, bufb
->buf_rsb
.id
);
931 v_add(config
, v_read(config
,
932 &shmp(handle
, shmp_index(handle
, bufb
->array
, read_sb_bindex
)->shmp
)->records_unread
),
933 &bufb
->records_read
);
934 v_set(config
, &shmp(handle
, shmp_index(handle
, bufb
->array
, read_sb_bindex
)->shmp
)->records_unread
, 0);
935 CHAN_WARN_ON(chan
, config
->mode
== RING_BUFFER_OVERWRITE
936 && subbuffer_id_is_noref(config
, bufb
->buf_rsb
.id
));
937 subbuffer_id_set_noref(config
, &bufb
->buf_rsb
.id
);
940 * Exchange the reader subbuffer with the one we put in its place in the
941 * writer subbuffer table. Expect the original consumed count. If
942 * update_read_sb_index fails, this is because the writer updated the
943 * subbuffer concurrently. We should therefore keep the subbuffer we
944 * currently have: it has become invalid to try reading this sub-buffer
945 * consumed count value anyway.
947 consumed_idx
= subbuf_index(consumed
, chan
);
948 update_read_sb_index(config
, &buf
->backend
, &chan
->backend
,
949 consumed_idx
, buf_trunc_val(consumed
, chan
),
952 * update_read_sb_index return value ignored. Don't exchange sub-buffer
953 * if the writer concurrently updated it.
958 * cons_offset is an iterator on all subbuffer offsets between the reader
959 * position and the writer position. (inclusive)
962 void lib_ring_buffer_print_subbuffer_errors(struct lttng_ust_lib_ring_buffer
*buf
,
963 struct channel
*chan
,
964 unsigned long cons_offset
,
966 struct lttng_ust_shm_handle
*handle
)
968 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
969 unsigned long cons_idx
, commit_count
, commit_count_sb
;
971 cons_idx
= subbuf_index(cons_offset
, chan
);
972 commit_count
= v_read(config
, &shmp_index(handle
, buf
->commit_hot
, cons_idx
)->cc
);
973 commit_count_sb
= v_read(config
, &shmp_index(handle
, buf
->commit_cold
, cons_idx
)->cc_sb
);
975 if (subbuf_offset(commit_count
, chan
) != 0)
976 ERRMSG("ring buffer %s, cpu %d: "
977 "commit count in subbuffer %lu,\n"
978 "expecting multiples of %lu bytes\n"
979 " [ %lu bytes committed, %lu bytes reader-visible ]\n",
980 chan
->backend
.name
, cpu
, cons_idx
,
981 chan
->backend
.subbuf_size
,
982 commit_count
, commit_count_sb
);
984 ERRMSG("ring buffer: %s, cpu %d: %lu bytes committed\n",
985 chan
->backend
.name
, cpu
, commit_count
);
989 void lib_ring_buffer_print_buffer_errors(struct lttng_ust_lib_ring_buffer
*buf
,
990 struct channel
*chan
,
992 struct lttng_ust_shm_handle
*handle
)
994 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
995 unsigned long write_offset
, cons_offset
;
998 * Can be called in the error path of allocation when
999 * trans_channel_data is not yet set.
1004 * No need to order commit_count, write_offset and cons_offset reads
1005 * because we execute at teardown when no more writer nor reader
1006 * references are left.
1008 write_offset
= v_read(config
, &buf
->offset
);
1009 cons_offset
= uatomic_read(&buf
->consumed
);
1010 if (write_offset
!= cons_offset
)
1011 ERRMSG("ring buffer %s, cpu %d: "
1012 "non-consumed data\n"
1013 " [ %lu bytes written, %lu bytes read ]\n",
1014 chan
->backend
.name
, cpu
, write_offset
, cons_offset
);
1016 for (cons_offset
= uatomic_read(&buf
->consumed
);
1017 (long) (subbuf_trunc((unsigned long) v_read(config
, &buf
->offset
),
1020 cons_offset
= subbuf_align(cons_offset
, chan
))
1021 lib_ring_buffer_print_subbuffer_errors(buf
, chan
, cons_offset
,
1026 void lib_ring_buffer_print_errors(struct channel
*chan
,
1027 struct lttng_ust_lib_ring_buffer
*buf
, int cpu
,
1028 struct lttng_ust_shm_handle
*handle
)
1030 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1031 void *priv
= channel_get_private(chan
);
1033 ERRMSG("ring buffer %s, cpu %d: %lu records written, "
1034 "%lu records overrun\n",
1035 chan
->backend
.name
, cpu
,
1036 v_read(config
, &buf
->records_count
),
1037 v_read(config
, &buf
->records_overrun
));
1039 if (v_read(config
, &buf
->records_lost_full
)
1040 || v_read(config
, &buf
->records_lost_wrap
)
1041 || v_read(config
, &buf
->records_lost_big
))
1042 ERRMSG("ring buffer %s, cpu %d: records were lost. Caused by:\n"
1043 " [ %lu buffer full, %lu nest buffer wrap-around, "
1044 "%lu event too big ]\n",
1045 chan
->backend
.name
, cpu
,
1046 v_read(config
, &buf
->records_lost_full
),
1047 v_read(config
, &buf
->records_lost_wrap
),
1048 v_read(config
, &buf
->records_lost_big
));
1050 lib_ring_buffer_print_buffer_errors(buf
, chan
, priv
, cpu
, handle
);
1054 * lib_ring_buffer_switch_old_start: Populate old subbuffer header.
1056 * Only executed when the buffer is finalized, in SWITCH_FLUSH.
1059 void lib_ring_buffer_switch_old_start(struct lttng_ust_lib_ring_buffer
*buf
,
1060 struct channel
*chan
,
1061 struct switch_offsets
*offsets
,
1063 struct lttng_ust_shm_handle
*handle
)
1065 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1066 unsigned long oldidx
= subbuf_index(offsets
->old
, chan
);
1067 unsigned long commit_count
;
1069 config
->cb
.buffer_begin(buf
, tsc
, oldidx
, handle
);
1072 * Order all writes to buffer before the commit count update that will
1073 * determine that the subbuffer is full.
1076 v_add(config
, config
->cb
.subbuffer_header_size(),
1077 &shmp_index(handle
, buf
->commit_hot
, oldidx
)->cc
);
1078 commit_count
= v_read(config
, &shmp_index(handle
, buf
->commit_hot
, oldidx
)->cc
);
1079 /* Check if the written buffer has to be delivered */
1080 lib_ring_buffer_check_deliver(config
, buf
, chan
, offsets
->old
,
1081 commit_count
, oldidx
, handle
);
1082 lib_ring_buffer_write_commit_counter(config
, buf
, chan
, oldidx
,
1083 offsets
->old
, commit_count
,
1084 config
->cb
.subbuffer_header_size(),
1089 * lib_ring_buffer_switch_old_end: switch old subbuffer
1091 * Note : offset_old should never be 0 here. It is ok, because we never perform
1092 * buffer switch on an empty subbuffer in SWITCH_ACTIVE mode. The caller
1093 * increments the offset_old value when doing a SWITCH_FLUSH on an empty
1097 void lib_ring_buffer_switch_old_end(struct lttng_ust_lib_ring_buffer
*buf
,
1098 struct channel
*chan
,
1099 struct switch_offsets
*offsets
,
1101 struct lttng_ust_shm_handle
*handle
)
1103 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1104 unsigned long oldidx
= subbuf_index(offsets
->old
- 1, chan
);
1105 unsigned long commit_count
, padding_size
, data_size
;
1107 data_size
= subbuf_offset(offsets
->old
- 1, chan
) + 1;
1108 padding_size
= chan
->backend
.subbuf_size
- data_size
;
1109 subbuffer_set_data_size(config
, &buf
->backend
, oldidx
, data_size
,
1113 * Order all writes to buffer before the commit count update that will
1114 * determine that the subbuffer is full.
1117 v_add(config
, padding_size
, &shmp_index(handle
, buf
->commit_hot
, oldidx
)->cc
);
1118 commit_count
= v_read(config
, &shmp_index(handle
, buf
->commit_hot
, oldidx
)->cc
);
1119 lib_ring_buffer_check_deliver(config
, buf
, chan
, offsets
->old
- 1,
1120 commit_count
, oldidx
, handle
);
1121 lib_ring_buffer_write_commit_counter(config
, buf
, chan
, oldidx
,
1122 offsets
->old
, commit_count
,
1123 padding_size
, handle
);
1127 * lib_ring_buffer_switch_new_start: Populate new subbuffer.
1129 * This code can be executed unordered : writers may already have written to the
1130 * sub-buffer before this code gets executed, caution. The commit makes sure
1131 * that this code is executed before the deliver of this sub-buffer.
1134 void lib_ring_buffer_switch_new_start(struct lttng_ust_lib_ring_buffer
*buf
,
1135 struct channel
*chan
,
1136 struct switch_offsets
*offsets
,
1138 struct lttng_ust_shm_handle
*handle
)
1140 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1141 unsigned long beginidx
= subbuf_index(offsets
->begin
, chan
);
1142 unsigned long commit_count
;
1144 config
->cb
.buffer_begin(buf
, tsc
, beginidx
, handle
);
1147 * Order all writes to buffer before the commit count update that will
1148 * determine that the subbuffer is full.
1151 v_add(config
, config
->cb
.subbuffer_header_size(),
1152 &shmp_index(handle
, buf
->commit_hot
, beginidx
)->cc
);
1153 commit_count
= v_read(config
, &shmp_index(handle
, buf
->commit_hot
, beginidx
)->cc
);
1154 /* Check if the written buffer has to be delivered */
1155 lib_ring_buffer_check_deliver(config
, buf
, chan
, offsets
->begin
,
1156 commit_count
, beginidx
, handle
);
1157 lib_ring_buffer_write_commit_counter(config
, buf
, chan
, beginidx
,
1158 offsets
->begin
, commit_count
,
1159 config
->cb
.subbuffer_header_size(),
1164 * lib_ring_buffer_switch_new_end: finish switching current subbuffer
1166 * The only remaining threads could be the ones with pending commits. They will
1167 * have to do the deliver themselves.
1170 void lib_ring_buffer_switch_new_end(struct lttng_ust_lib_ring_buffer
*buf
,
1171 struct channel
*chan
,
1172 struct switch_offsets
*offsets
,
1174 struct lttng_ust_shm_handle
*handle
)
1176 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1177 unsigned long endidx
= subbuf_index(offsets
->end
- 1, chan
);
1178 unsigned long commit_count
, padding_size
, data_size
;
1180 data_size
= subbuf_offset(offsets
->end
- 1, chan
) + 1;
1181 padding_size
= chan
->backend
.subbuf_size
- data_size
;
1182 subbuffer_set_data_size(config
, &buf
->backend
, endidx
, data_size
,
1186 * Order all writes to buffer before the commit count update that will
1187 * determine that the subbuffer is full.
1190 v_add(config
, padding_size
, &shmp_index(handle
, buf
->commit_hot
, endidx
)->cc
);
1191 commit_count
= v_read(config
, &shmp_index(handle
, buf
->commit_hot
, endidx
)->cc
);
1192 lib_ring_buffer_check_deliver(config
, buf
, chan
, offsets
->end
- 1,
1193 commit_count
, endidx
, handle
);
1194 lib_ring_buffer_write_commit_counter(config
, buf
, chan
, endidx
,
1195 offsets
->end
, commit_count
,
1196 padding_size
, handle
);
1202 * !0 if execution must be aborted.
1205 int lib_ring_buffer_try_switch_slow(enum switch_mode mode
,
1206 struct lttng_ust_lib_ring_buffer
*buf
,
1207 struct channel
*chan
,
1208 struct switch_offsets
*offsets
,
1211 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1214 offsets
->begin
= v_read(config
, &buf
->offset
);
1215 offsets
->old
= offsets
->begin
;
1216 offsets
->switch_old_start
= 0;
1217 off
= subbuf_offset(offsets
->begin
, chan
);
1219 *tsc
= config
->cb
.ring_buffer_clock_read(chan
);
1222 * Ensure we flush the header of an empty subbuffer when doing the
1223 * finalize (SWITCH_FLUSH). This ensures that we end up knowing the
1224 * total data gathering duration even if there were no records saved
1225 * after the last buffer switch.
1226 * In SWITCH_ACTIVE mode, switch the buffer when it contains events.
1227 * SWITCH_ACTIVE only flushes the current subbuffer, dealing with end of
1228 * subbuffer header as appropriate.
1229 * The next record that reserves space will be responsible for
1230 * populating the following subbuffer header. We choose not to populate
1231 * the next subbuffer header here because we want to be able to use
1232 * SWITCH_ACTIVE for periodical buffer flush, which must
1233 * guarantee that all the buffer content (records and header
1234 * timestamps) are visible to the reader. This is required for
1235 * quiescence guarantees for the fusion merge.
1237 if (mode
== SWITCH_FLUSH
|| off
> 0) {
1238 if (caa_unlikely(off
== 0)) {
1240 * The client does not save any header information.
1241 * Don't switch empty subbuffer on finalize, because it
1242 * is invalid to deliver a completely empty subbuffer.
1244 if (!config
->cb
.subbuffer_header_size())
1247 * Need to write the subbuffer start header on finalize.
1249 offsets
->switch_old_start
= 1;
1251 offsets
->begin
= subbuf_align(offsets
->begin
, chan
);
1253 return -1; /* we do not have to switch : buffer is empty */
1254 /* Note: old points to the next subbuf at offset 0 */
1255 offsets
->end
= offsets
->begin
;
1260 * Force a sub-buffer switch. This operation is completely reentrant : can be
1261 * called while tracing is active with absolutely no lock held.
1263 * Note, however, that as a v_cmpxchg is used for some atomic
1264 * operations, this function must be called from the CPU which owns the buffer
1265 * for a ACTIVE flush.
1267 void lib_ring_buffer_switch_slow(struct lttng_ust_lib_ring_buffer
*buf
, enum switch_mode mode
,
1268 struct lttng_ust_shm_handle
*handle
)
1270 struct channel
*chan
= shmp(handle
, buf
->backend
.chan
);
1271 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1272 struct switch_offsets offsets
;
1273 unsigned long oldidx
;
1279 * Perform retryable operations.
1282 if (lib_ring_buffer_try_switch_slow(mode
, buf
, chan
, &offsets
,
1284 return; /* Switch not needed */
1285 } while (v_cmpxchg(config
, &buf
->offset
, offsets
.old
, offsets
.end
)
1289 * Atomically update last_tsc. This update races against concurrent
1290 * atomic updates, but the race will always cause supplementary full TSC
1291 * records, never the opposite (missing a full TSC record when it would
1294 save_last_tsc(config
, buf
, tsc
);
1297 * Push the reader if necessary
1299 lib_ring_buffer_reserve_push_reader(buf
, chan
, offsets
.old
);
1301 oldidx
= subbuf_index(offsets
.old
, chan
);
1302 lib_ring_buffer_clear_noref(config
, &buf
->backend
, oldidx
, handle
);
1305 * May need to populate header start on SWITCH_FLUSH.
1307 if (offsets
.switch_old_start
) {
1308 lib_ring_buffer_switch_old_start(buf
, chan
, &offsets
, tsc
, handle
);
1309 offsets
.old
+= config
->cb
.subbuffer_header_size();
1313 * Switch old subbuffer.
1315 lib_ring_buffer_switch_old_end(buf
, chan
, &offsets
, tsc
, handle
);
1321 * -ENOSPC if event size is too large for packet.
1322 * -ENOBUFS if there is currently not enough space in buffer for the event.
1323 * -EIO if data cannot be written into the buffer for any other reason.
1326 int lib_ring_buffer_try_reserve_slow(struct lttng_ust_lib_ring_buffer
*buf
,
1327 struct channel
*chan
,
1328 struct switch_offsets
*offsets
,
1329 struct lttng_ust_lib_ring_buffer_ctx
*ctx
)
1331 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1332 struct lttng_ust_shm_handle
*handle
= ctx
->handle
;
1333 unsigned long reserve_commit_diff
;
1335 offsets
->begin
= v_read(config
, &buf
->offset
);
1336 offsets
->old
= offsets
->begin
;
1337 offsets
->switch_new_start
= 0;
1338 offsets
->switch_new_end
= 0;
1339 offsets
->switch_old_end
= 0;
1340 offsets
->pre_header_padding
= 0;
1342 ctx
->tsc
= config
->cb
.ring_buffer_clock_read(chan
);
1343 if ((int64_t) ctx
->tsc
== -EIO
)
1346 if (last_tsc_overflow(config
, buf
, ctx
->tsc
))
1347 ctx
->rflags
|= RING_BUFFER_RFLAG_FULL_TSC
;
1349 if (caa_unlikely(subbuf_offset(offsets
->begin
, ctx
->chan
) == 0)) {
1350 offsets
->switch_new_start
= 1; /* For offsets->begin */
1352 offsets
->size
= config
->cb
.record_header_size(config
, chan
,
1354 &offsets
->pre_header_padding
,
1357 lib_ring_buffer_align(offsets
->begin
+ offsets
->size
,
1360 if (caa_unlikely(subbuf_offset(offsets
->begin
, chan
) +
1361 offsets
->size
> chan
->backend
.subbuf_size
)) {
1362 offsets
->switch_old_end
= 1; /* For offsets->old */
1363 offsets
->switch_new_start
= 1; /* For offsets->begin */
1366 if (caa_unlikely(offsets
->switch_new_start
)) {
1367 unsigned long sb_index
;
1370 * We are typically not filling the previous buffer completely.
1372 if (caa_likely(offsets
->switch_old_end
))
1373 offsets
->begin
= subbuf_align(offsets
->begin
, chan
);
1374 offsets
->begin
= offsets
->begin
1375 + config
->cb
.subbuffer_header_size();
1376 /* Test new buffer integrity */
1377 sb_index
= subbuf_index(offsets
->begin
, chan
);
1378 reserve_commit_diff
=
1379 (buf_trunc(offsets
->begin
, chan
)
1380 >> chan
->backend
.num_subbuf_order
)
1381 - ((unsigned long) v_read(config
,
1382 &shmp_index(handle
, buf
->commit_cold
, sb_index
)->cc_sb
)
1383 & chan
->commit_count_mask
);
1384 if (caa_likely(reserve_commit_diff
== 0)) {
1385 /* Next subbuffer not being written to. */
1386 if (caa_unlikely(config
->mode
!= RING_BUFFER_OVERWRITE
&&
1387 subbuf_trunc(offsets
->begin
, chan
)
1388 - subbuf_trunc((unsigned long)
1389 uatomic_read(&buf
->consumed
), chan
)
1390 >= chan
->backend
.buf_size
)) {
1392 * We do not overwrite non consumed buffers
1393 * and we are full : record is lost.
1395 v_inc(config
, &buf
->records_lost_full
);
1399 * Next subbuffer not being written to, and we
1400 * are either in overwrite mode or the buffer is
1401 * not full. It's safe to write in this new
1407 * Next subbuffer reserve offset does not match the
1408 * commit offset. Drop record in producer-consumer and
1409 * overwrite mode. Caused by either a writer OOPS or too
1410 * many nested writes over a reserve/commit pair.
1412 v_inc(config
, &buf
->records_lost_wrap
);
1416 config
->cb
.record_header_size(config
, chan
,
1418 &offsets
->pre_header_padding
,
1421 lib_ring_buffer_align(offsets
->begin
+ offsets
->size
,
1424 if (caa_unlikely(subbuf_offset(offsets
->begin
, chan
)
1425 + offsets
->size
> chan
->backend
.subbuf_size
)) {
1427 * Record too big for subbuffers, report error, don't
1428 * complete the sub-buffer switch.
1430 v_inc(config
, &buf
->records_lost_big
);
1434 * We just made a successful buffer switch and the
1435 * record fits in the new subbuffer. Let's write.
1440 * Record fits in the current buffer and we are not on a switch
1441 * boundary. It's safe to write.
1444 offsets
->end
= offsets
->begin
+ offsets
->size
;
1446 if (caa_unlikely(subbuf_offset(offsets
->end
, chan
) == 0)) {
1448 * The offset_end will fall at the very beginning of the next
1451 offsets
->switch_new_end
= 1; /* For offsets->begin */
1457 * lib_ring_buffer_reserve_slow - Atomic slot reservation in a buffer.
1458 * @ctx: ring buffer context.
1460 * Return : -NOBUFS if not enough space, -ENOSPC if event size too large,
1461 * -EIO for other errors, else returns 0.
1462 * It will take care of sub-buffer switching.
1464 int lib_ring_buffer_reserve_slow(struct lttng_ust_lib_ring_buffer_ctx
*ctx
)
1466 struct channel
*chan
= ctx
->chan
;
1467 struct lttng_ust_shm_handle
*handle
= ctx
->handle
;
1468 const struct lttng_ust_lib_ring_buffer_config
*config
= &chan
->backend
.config
;
1469 struct lttng_ust_lib_ring_buffer
*buf
;
1470 struct switch_offsets offsets
;
1473 if (config
->alloc
== RING_BUFFER_ALLOC_PER_CPU
)
1474 buf
= shmp(handle
, chan
->backend
.buf
[ctx
->cpu
].shmp
);
1476 buf
= shmp(handle
, chan
->backend
.buf
[0].shmp
);
1482 ret
= lib_ring_buffer_try_reserve_slow(buf
, chan
, &offsets
,
1484 if (caa_unlikely(ret
))
1486 } while (caa_unlikely(v_cmpxchg(config
, &buf
->offset
, offsets
.old
,
1491 * Atomically update last_tsc. This update races against concurrent
1492 * atomic updates, but the race will always cause supplementary full TSC
1493 * records, never the opposite (missing a full TSC record when it would
1496 save_last_tsc(config
, buf
, ctx
->tsc
);
1499 * Push the reader if necessary
1501 lib_ring_buffer_reserve_push_reader(buf
, chan
, offsets
.end
- 1);
1504 * Clear noref flag for this subbuffer.
1506 lib_ring_buffer_clear_noref(config
, &buf
->backend
,
1507 subbuf_index(offsets
.end
- 1, chan
),
1511 * Switch old subbuffer if needed.
1513 if (caa_unlikely(offsets
.switch_old_end
)) {
1514 lib_ring_buffer_clear_noref(config
, &buf
->backend
,
1515 subbuf_index(offsets
.old
- 1, chan
),
1517 lib_ring_buffer_switch_old_end(buf
, chan
, &offsets
, ctx
->tsc
, handle
);
1521 * Populate new subbuffer.
1523 if (caa_unlikely(offsets
.switch_new_start
))
1524 lib_ring_buffer_switch_new_start(buf
, chan
, &offsets
, ctx
->tsc
, handle
);
1526 if (caa_unlikely(offsets
.switch_new_end
))
1527 lib_ring_buffer_switch_new_end(buf
, chan
, &offsets
, ctx
->tsc
, handle
);
1529 ctx
->slot_size
= offsets
.size
;
1530 ctx
->pre_offset
= offsets
.begin
;
1531 ctx
->buf_offset
= offsets
.begin
+ offsets
.pre_header_padding
;