automation/preseed.cfg

   1 ### Localization
   2 # Preseeding only locale sets language, country and locale.
   3 d-i debian-installer/language string en
   4 d-i debian-installer/country string CA
   5 d-i debian-installer/locale string en_US.UTF-8
   6 # Optionally specify additional locales to be generated.
   7 #d-i localechooser/supported-locales en_US.UTF-8, nl_NL.UTF-8
   8
   9 # Keyboard selection.
  10 # Disable automatic (interactive) keymap detection.
  11 d-i console-setup/ask_detect boolean false
  12 #d-i keyboard-configuration/modelcode string pc105
  13 d-i keyboard-configuration/layoutcode string us
  14 # To select a variant of the selected layout (if you leave this out, the
  15 # basic form of the layout will be used):
  16 #d-i keyboard-configuration/variantcode string dvorak
  17
  18 ### Network configuration
  19 # Disable network configuration entirely. This is useful for cdrom
  20 # installations on non-networked devices where the network questions,
  21 # warning and long timeouts are a nuisance.
  22 #d-i netcfg/enable boolean false
  23
  24 # netcfg will choose an interface that has link if possible. This makes it
  25 # skip displaying a list if there is more than one interface.
  26 d-i netcfg/choose_interface select auto
  27
  28 # To pick a particular interface instead:
  29 #d-i netcfg/choose_interface select eth1
  30
  31 # If you have a slow dhcp server and the installer times out waiting for
  32 # it, this might be useful.
  33 #d-i netcfg/dhcp_timeout string 60
  34
  35 # If you prefer to configure the network manually, uncomment this line and
  36 # the static network configuration below.
  37 #d-i netcfg/disable_autoconfig boolean true
  38
  39 # If you want the preconfiguration file to work on systems both with and
  40 # without a dhcp server, uncomment these lines and the static network
  41 # configuration below.
  42 #d-i netcfg/dhcp_failed note
  43 #d-i netcfg/dhcp_options select Configure network manually
  44
  45 # Static network configuration.
  46 #d-i netcfg/get_nameservers string 192.168.1.1
  47 #d-i netcfg/get_ipaddress string 192.168.1.42
  48 #d-i netcfg/get_netmask string 255.255.255.0
  49 #d-i netcfg/get_gateway string 192.168.1.1
  50 #d-i netcfg/confirm_static boolean true
  51
  52 # Any hostname and domain names assigned from dhcp take precedence over
  53 # values set here. However, setting the values still prevents the questions
  54 # from being shown, even if values come from dhcp.
  55 d-i netcfg/get_hostname string unassigned-hostname
  56 d-i netcfg/get_domain string unassigned-domain
  57 d-i netcfg/get_hostname seen true
  58 d-i netcfg/get_domain seen true
  59
  60 # Disable that annoying WEP key dialog.
  61 d-i netcfg/wireless_wep string
  62 # The wacky dhcp hostname that some ISPs use as a password of sorts.
  63 #d-i netcfg/dhcp_hostname string radish
  64
  65 # If non-free firmware is needed for the network or other hardware, you can
  66 # configure the installer to always try to load it, without prompting. Or
  67 # change to false to disable asking.
  68 #d-i hw-detect/load_firmware boolean true
  69
  70 ### Network console
  71 # Use the following settings if you wish to make use of the network-console
  72 # component for remote installation over SSH. This only makes sense if you
  73 # intend to perform the remainder of the installation manually.
  74 #d-i anna/choose_modules string network-console
  75 #d-i network-console/password password r00tme
  76 #d-i network-console/password-again password r00tme
  77 # Use this instead if you prefer to use key-based authentication
  78 #d-i network-console/authorized_keys_url http://host/authorized_keys
  79
  80 ### Mirror settings
  81 # If you select ftp, the mirror/country string does not need to be set.
  82 #d-i mirror/protocol string ftp
  83 d-i mirror/country string manual
  84 d-i mirror/http/hostname string ca.archive.ubuntu.com
  85 d-i mirror/http/directory string /ubuntu
  86
  87 # Alternatively: by default, the installer uses CC.archive.ubuntu.com where
  88 # CC is the ISO-3166-2 code for the selected country. You can preseed this
  89 # so that it does so without asking.
  90 #d-i mirror/http/mirror select CC.archive.ubuntu.com
  91
  92 # Suite to install.
  93 #d-i mirror/suite string squeeze
  94 # Suite to use for loading installer components (optional).
  95 #d-i mirror/udeb/suite string squeeze
  96 # Components to use for loading installer components (optional).
  97 #d-i mirror/udeb/components multiselect main, restricted
  98
  99 ### Clock and time zone setup
 100 # Controls whether or not the hardware clock is set to UTC.
 101 d-i clock-setup/utc boolean true
 102
 103 # You may set this to any valid setting for $TZ; see the contents of
 104 # /usr/share/zoneinfo/ for valid values.
 105 d-i time/zone string US/Eastern
 106
 107 # Controls whether to use NTP to set the clock during the install
 108 d-i clock-setup/ntp boolean true
 109 # NTP server to use. The default is almost always fine here.
 110 #d-i clock-setup/ntp-server string ntp.example.com
 111
 112 ### Partitioning
 113 ## Partitioning example
 114 # If the system has free space you can choose to only partition that space.
 115 # This is only honoured if partman-auto/method (below) is not set.
 116 # Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
 117 #d-i partman-auto/init_automatically_partition select biggest_free
 118
 119 # Alternatively, you may specify a disk to partition. If the system has only
 120 # one disk the installer will default to using that, but otherwise the device
 121 # name must be given in traditional, non-devfs format (so e.g. /dev/hda or
 122 # /dev/sda, and not e.g. /dev/discs/disc0/disc).
 123 # For example, to use the first SCSI/SATA hard disk:
 124 d-i partman-auto/disk string
 125 # In addition, you'll need to specify the method to use.
 126 # The presently available methods are:
 127 # - regular: use the usual partition types for your architecture
 128 # - lvm:     use LVM to partition the disk
 129 # - crypto:  use LVM within an encrypted partition
 130 d-i partman-auto/method string regular
 131
 132 # If one of the disks that are going to be automatically partitioned
 133 # contains an old LVM configuration, the user will normally receive a
 134 # warning. This can be preseeded away...
 135 d-i partman-lvm/device_remove_lvm boolean true
 136 # The same applies to pre-existing software RAID array:
 137 d-i partman-md/device_remove_md boolean true
 138 # And the same goes for the confirmation to write the lvm partitions.
 139 d-i partman-lvm/confirm boolean true
 140
 141 # For LVM partitioning, you can select how much of the volume group to use
 142 # for logical volumes.
 143 #d-i partman-auto-lvm/guided_size string max
 144 #d-i partman-auto-lvm/guided_size string 10GB
 145 #d-i partman-auto-lvm/guided_size string 50%
 146
 147 # You can choose one of the three predefined partitioning recipes:
 148 # - atomic: all files in one partition
 149 # - home:   separate /home partition
 150 # - multi:  separate /home, /usr, /var, and /tmp partitions
 151 #d-i partman-auto/choose_recipe select atomic
 152
 153 # Or provide a recipe of your own...
 154 # If you have a way to get a recipe file into the d-i environment, you can
 155 # just point at it.
 156 #d-i partman-auto/expert_recipe_file string /hd-media/recipe
 157
 158 d-i partman-basicfilesystems/no_swap boolean false
 159
 160 # If not, you can put an entire recipe into the preconfiguration file in one
 161 # (logical) line. This example creates a small /boot partition, suitable
 162 # swap, and uses the rest of the space for the root partition:
 163 d-i partman-auto/expert_recipe string                         \
 164       boot-root ::                                            \
 165               500 10000 1000000000 ext4                       \
 166                       method{ format } format{ }              \
 167                       use_filesystem{ } filesystem{ ext4 }    \
 168                       mountpoint{ / }                         \
 169               .                                               \
 170
 171 # If you just want to change the default filesystem from ext3 to something
 172 # else, you can do that without providing a full recipe.
 173 #d-i partman/default_filesystem string ext4
 174
 175 # The full recipe format is documented in the file partman-auto-recipe.txt
 176 # included in the 'debian-installer' package or available from D-I source
 177 # repository. This also documents how to specify settings such as file
 178 # system labels, volume group names and which physical devices to include
 179 # in a volume group.
 180
 181 # This makes partman automatically partition without confirmation, provided
 182 # that you told it what to do using one of the methods above.
 183 d-i partman-partitioning/confirm_write_new_label boolean true
 184 d-i partman/choose_partition select finish
 185 d-i partman/confirm boolean true
 186 d-i partman/confirm_nooverwrite boolean true
 187
 188 ## Partitioning using RAID
 189 # The method should be set to "raid".
 190 #d-i partman-auto/method string raid
 191 # Specify the disks to be partitioned. They will all get the same layout,
 192 # so this will only work if the disks are the same size.
 193 #d-i partman-auto/disk string /dev/sda /dev/sdb
 194
 195 # Next you need to specify the physical partitions that will be used.
 196 #d-i partman-auto/expert_recipe string \
 197 #      multiraid ::                                         \
 198 #              1000 5000 4000 raid                          \
 199 #                      $primary{ } method{ raid }           \
 200 #              .                                            \
 201 #              64 512 300% raid                             \
 202 #                      method{ raid }                       \
 203 #              .                                            \
 204 #              500 10000 1000000000 raid                    \
 205 #                      method{ raid }                       \
 206 #              .
 207
 208 # Last you need to specify how the previously defined partitions will be
 209 # used in the RAID setup. Remember to use the correct partition numbers
 210 # for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
 211 # devices are separated using "#".
 212 # Parameters are:
 213 # <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
 214 #          <devices> <sparedevices>
 215
 216 #d-i partman-auto-raid/recipe string \
 217 #    1 2 0 ext3 /                    \
 218 #          /dev/sda1#/dev/sdb1       \
 219 #    .                               \
 220 #    1 2 0 swap -                    \
 221 #          /dev/sda5#/dev/sdb5       \
 222 #    .                               \
 223 #    0 2 0 ext3 /home                \
 224 #          /dev/sda6#/dev/sdb6       \
 225 #    .
 226
 227 # For additional information see the file partman-auto-raid-recipe.txt
 228 # included in the 'debian-installer' package or available from D-I source
 229 # repository.
 230
 231 # This makes partman automatically partition without confirmation.
 232 d-i partman-md/confirm boolean true
 233 d-i partman-partitioning/confirm_write_new_label boolean true
 234 d-i partman/choose_partition select finish
 235 d-i partman/confirm boolean true
 236 d-i partman/confirm_nooverwrite boolean true
 237
 238 ## Controlling how partitions are mounted
 239 # The default is to mount by UUID, but you can also choose "traditional" to
 240 # use traditional device names, or "label" to try filesystem labels before
 241 # falling back to UUIDs.
 242 #d-i partman/mount_style select uuid
 243
 244 ### Base system installation
 245 # Configure APT to not install recommended packages by default. Use of this
 246 # option can result in an incomplete system and should only be used by very
 247 # experienced users.
 248 #d-i base-installer/install-recommends boolean false
 249
 250 # The kernel image (meta) package to be installed; "none" can be used if no
 251 # kernel is to be installed.
 252 #d-i base-installer/kernel/image string linux-generic
 253
 254 ### Account setup
 255 # Skip creation of a root account (normal user account will be able to
 256 # use sudo). The default is false; preseed this to true if you want to set
 257 # a root password.
 258 d-i passwd/root-login boolean false
 259 # Alternatively, to skip creation of a normal user account.
 260 d-i passwd/make-user boolean true
 261
 262 # Root password, either in clear text
 263 #d-i passwd/root-password password r00tme
 264 #d-i passwd/root-password-again password r00tme
 265 # or encrypted using an MD5 hash.
 266 #d-i passwd/root-password-crypted password
 267
 268 # To create a normal user account.
 269 d-i passwd/user-fullname string Jenkins User
 270 d-i passwd/username string jenkins
 271 # Normal user's password, either in clear text
 272 #d-i passwd/user-password password insecure
 273 #d-i passwd/user-password-again password insecure
 274 # or encrypted using an MD5 hash.
 275 d-i passwd/user-password-crypted password $1$svkdd48V$/ovKt1dnK18UIZAA4xt6/1
 276 # Create the first user with the specified UID instead of the default.
 277 #d-i passwd/user-uid string 1010
 278 # The installer will warn about weak passwords. If you are sure you know
 279 # what you're doing and want to override it, uncomment this.
 280 d-i user-setup/allow-password-weak boolean true
 281
 282 # The user account will be added to some standard initial groups. To
 283 # override that, use this.
 284 #d-i passwd/user-default-groups string audio cdrom video
 285
 286 # Set to true if you want to encrypt the first user's home directory.
 287 d-i user-setup/encrypt-home boolean false
 288
 289 ### Apt setup
 290 # You can choose to install restricted and universe software, or to install
 291 # software from the backports repository.
 292 #d-i apt-setup/restricted boolean true
 293 #d-i apt-setup/universe boolean true
 294 #d-i apt-setup/backports boolean true
 295 # Uncomment this if you don't want to use a network mirror.
 296 #d-i apt-setup/use_mirror boolean false
 297 # Select which update services to use; define the mirrors to be used.
 298 # Values shown below are the normal defaults.
 299 #d-i apt-setup/services-select multiselect security
 300 #d-i apt-setup/security_host string security.ubuntu.com
 301 #d-i apt-setup/security_path string /ubuntu
 302
 303 # Additional repositories, local[0-9] available
 304 #d-i apt-setup/local0/repository string \
 305 #       http://local.server/ubuntu squeeze main
 306 #d-i apt-setup/local0/comment string local server
 307 # Enable deb-src lines
 308 #d-i apt-setup/local0/source boolean true
 309 # URL to the public key of the local repository; you must provide a key or
 310 # apt will complain about the unauthenticated repository and so the
 311 # sources.list line will be left commented out
 312 #d-i apt-setup/local0/key string http://local.server/key
 313
 314 # By default the installer requires that repositories be authenticated
 315 # using a known gpg key. This setting can be used to disable that
 316 # authentication. Warning: Insecure, not recommended.
 317 #d-i debian-installer/allow_unauthenticated boolean true
 318
 319 ### Package selection
 320 #tasksel tasksel/first multiselect ubuntu-desktop
 321 #tasksel tasksel/first multiselect lamp-server, print-server
 322 #tasksel tasksel/first multiselect kubuntu-desktop
 323 tasksel tasksel/first multiselect
 324
 325 # Individual additional packages to install
 326 d-i pkgsel/include string openssh-server
 327 # Whether to upgrade packages after debootstrap.
 328 # Allowed values: none, safe-upgrade, full-upgrade
 329 #d-i pkgsel/upgrade select none
 330
 331 # Language pack selection
 332 #d-i pkgsel/language-packs multiselect de, en, zh
 333
 334 # Policy for applying updates. May be "none" (no automatic updates),
 335 # "unattended-upgrades" (install security updates automatically), or
 336 # "landscape" (manage system with Landscape).
 337 d-i pkgsel/update-policy select none
 338
 339 # Some versions of the installer can report back on what software you have
 340 # installed, and what software you use. The default is not to report back,
 341 # but sending reports helps the project determine what software is most
 342 # popular and include it on CDs.
 343 #popularity-contest popularity-contest/participate boolean false
 344
 345 # By default, the system's locate database will be updated after the
 346 # installer has finished installing most packages. This may take a while, so
 347 # if you don't want it, you can set this to "false" to turn it off.
 348 #d-i pkgsel/updatedb boolean true
 349
 350 ### Boot loader installation
 351 # Grub is the default boot loader (for x86). If you want lilo installed
 352 # instead, uncomment this:
 353 #d-i grub-installer/skip boolean true
 354 # To also skip installing lilo, and install no bootloader, uncomment this
 355 # too:
 356 #d-i lilo-installer/skip boolean true
 357
 358 # With a few exceptions for unusual partitioning setups, GRUB 2 is now the
 359 # default. If you need GRUB Legacy for some particular reason, then
 360 # uncomment this:
 361 #d-i grub-installer/grub2_instead_of_grub_legacy boolean false
 362
 363 # This is fairly safe to set, it makes grub install automatically to the MBR
 364 # if no other operating system is detected on the machine.
 365 d-i grub-installer/only_debian boolean true
 366
 367 # This one makes grub-installer install to the MBR if it also finds some other
 368 # OS, which is less safe as it might not be able to boot that other OS.
 369 d-i grub-installer/with_other_os boolean true
 370
 371 # Alternatively, if you want to install to a location other than the mbr,
 372 # uncomment and edit these lines:
 373 #d-i grub-installer/only_debian boolean false
 374 #d-i grub-installer/with_other_os boolean false
 375 #d-i grub-installer/bootdev  string (hd0,0)
 376 # To install grub to multiple disks:
 377 #d-i grub-installer/bootdev  string (hd0,0) (hd1,0) (hd2,0)
 378
 379 # Optional password for grub, either in clear text
 380 #d-i grub-installer/password password r00tme
 381 #d-i grub-installer/password-again password r00tme
 382 # or encrypted using an MD5 hash, see grub-md5-crypt(8).
 383 #d-i grub-installer/password-crypted password [MD5 hash]
 384
 385 # Use the following option to add additional boot parameters for the
 386 # installed system (if supported by the bootloader installer).
 387 # Note: options passed to the installer will be added automatically.
 388 #d-i debian-installer/add-kernel-opts string nousb
 389
 390 ### Finishing up the installation
 391 # During installations from serial console, the regular virtual consoles
 392 # (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
 393 # line to prevent this.
 394 #d-i finish-install/keep-consoles boolean true
 395
 396 # Avoid that last message about the install being complete.
 397 d-i finish-install/reboot_in_progress note
 398
 399 # This will prevent the installer from ejecting the CD during the reboot,
 400 # which is useful in some situations.
 401 #d-i cdrom-detect/eject boolean false
 402
 403 # This is how to make the installer shutdown when finished, but not
 404 # reboot into the installed system.
 405 #d-i debian-installer/exit/halt boolean true
 406 # This will power off the machine instead of just halting it.
 407 #d-i debian-installer/exit/poweroff boolean true
 408
 409 ### Preseeding other packages
 410 # Depending on what software you choose to install, or if things go wrong
 411 # during the installation process, it's possible that other questions may
 412 # be asked. You can preseed those too, of course. To get a list of every
 413 # possible question that could be asked during an install, do an
 414 # installation, and then run these commands:
 415 #   debconf-get-selections --installer > file
 416 #   debconf-get-selections >> file
 417
 418
 419 #### Advanced options
 420 ### Running custom commands during the installation
 421 # d-i preseeding is inherently not secure. Nothing in the installer checks
 422 # for attempts at buffer overflows or other exploits of the values of a
 423 # preconfiguration file like this one. Only use preconfiguration files from
 424 # trusted locations! To drive that home, and because it's generally useful,
 425 # here's a way to run any shell command you'd like inside the installer,
 426 # automatically.
 427
 428 # This first command is run as early as possible, just after
 429 # preseeding is read.
 430 #d-i preseed/early_command string anna-install some-udeb
 431 # This command is run immediately before the partitioner starts. It may be
 432 # useful to apply dynamic partitioner preseeding that depends on the state
 433 # of the disks (which may not be visible when preseed/early_command runs).
 434 #d-i partman/early_command \
 435 #       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
 436 # This command is run just before the install finishes, but when there is
 437 # still a usable /target directory. You can chroot to /target and use it
 438 # directly, or use the apt-install and in-target commands to easily install
 439 # packages and run commands in the target system.
 440 #d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
 441 d-i preseed/late_command string \
 442 mkdir /target/root/.ssh; \
 443 chmod 700 /target/root/.ssh; \
 444 wget http://tftp.internal.efficios.com/authorized_keys -O /target/root/.ssh/authorized_keys; \
 445 mkdir /target/home/jenkins/.ssh; \
 446 chmod 700 /target/home/jenkins/.ssh; \
 447 echo "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDA3fwpioVLDoCQsQkYK5bOwPb8N0EXeYm2MleBQTfqxtKaqWWbmUtFXAiyclKHRspjcAiIKwwqLyhPopHBqJzmXnB0GsfGmxXJ6wSBgKJ4kdBVRM+nKlK0wCl1oQkFeV/Xl3jzt1Ey96XiNWlesfkvgcMCpsJzQ7/xRb9IcghskzlQbLOwDNir/156JgAYUYvOLqNCcE+xcgPxJGanfZDXTLkfBYxaeaB8isBPeEU6fhPvu/W055M1uB7E0qhcbFtuKCBu1Fg4jzsW4yDU8+ZB1b5mAXwEAuMbVGMrOf4rjtTpGpQd6XFsXpFT28NU1u5j2cUbtANJalkNDX/UY6XJ jenkins@ci-master-02" > /target/home/jenkins/.ssh/authorized_keys; \
 448 chown -R 1000:1000 /target/home/jenkins/.ssh;