| 1 | /* |
| 2 | * SPDX-License-Identifier: LGPL-2.1-only |
| 3 | * |
| 4 | * Copyright (C) 2005-2012 Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
| 5 | * |
| 6 | * Ring buffer wait-free buffer synchronization. Producer-consumer and flight |
| 7 | * recorder (overwrite) modes. See thesis: |
| 8 | * |
| 9 | * Desnoyers, Mathieu (2009), "Low-Impact Operating System Tracing", Ph.D. |
| 10 | * dissertation, Ecole Polytechnique de Montreal. |
| 11 | * http://www.lttng.org/pub/thesis/desnoyers-dissertation-2009-12.pdf |
| 12 | * |
| 13 | * - Algorithm presentation in Chapter 5: |
| 14 | * "Lockless Multi-Core High-Throughput Buffering". |
| 15 | * - Algorithm formal verification in Section 8.6: |
| 16 | * "Formal verification of LTTng" |
| 17 | * |
| 18 | * Author: |
| 19 | * Mathieu Desnoyers <mathieu.desnoyers@efficios.com> |
| 20 | * |
| 21 | * Inspired from LTT and RelayFS: |
| 22 | * Karim Yaghmour <karim@opersys.com> |
| 23 | * Tom Zanussi <zanussi@us.ibm.com> |
| 24 | * Bob Wisniewski <bob@watson.ibm.com> |
| 25 | * And from K42 : |
| 26 | * Bob Wisniewski <bob@watson.ibm.com> |
| 27 | * |
| 28 | * Buffer reader semantic : |
| 29 | * |
| 30 | * - get_subbuf_size |
| 31 | * while buffer is not finalized and empty |
| 32 | * - get_subbuf |
| 33 | * - if return value != 0, continue |
| 34 | * - splice one subbuffer worth of data to a pipe |
| 35 | * - splice the data from pipe to disk/network |
| 36 | * - put_subbuf |
| 37 | */ |
| 38 | |
| 39 | #define _LGPL_SOURCE |
| 40 | #include <sys/types.h> |
| 41 | #include <sys/mman.h> |
| 42 | #include <sys/stat.h> |
| 43 | #include <unistd.h> |
| 44 | #include <fcntl.h> |
| 45 | #include <signal.h> |
| 46 | #include <time.h> |
| 47 | #include <stdbool.h> |
| 48 | #include <stdint.h> |
| 49 | #include <urcu/compiler.h> |
| 50 | #include <urcu/ref.h> |
| 51 | #include <urcu/tls-compat.h> |
| 52 | #include <poll.h> |
| 53 | #include <ust-helper.h> |
| 54 | |
| 55 | #include <lttng/align.h> |
| 56 | #include "smp.h" |
| 57 | #include <lttng/ringbuffer-config.h> |
| 58 | #include "vatomic.h" |
| 59 | #include "backend.h" |
| 60 | #include "frontend.h" |
| 61 | #include "shm.h" |
| 62 | #include "rb-init.h" |
| 63 | #include "../liblttng-ust/compat.h" /* For ENODATA */ |
| 64 | |
| 65 | /* Print DBG() messages about events lost only every 1048576 hits */ |
| 66 | #define DBG_PRINT_NR_LOST (1UL << 20) |
| 67 | |
| 68 | #define LTTNG_UST_RB_SIG_FLUSH SIGRTMIN |
| 69 | #define LTTNG_UST_RB_SIG_READ SIGRTMIN + 1 |
| 70 | #define LTTNG_UST_RB_SIG_TEARDOWN SIGRTMIN + 2 |
| 71 | #define CLOCKID CLOCK_MONOTONIC |
| 72 | #define LTTNG_UST_RING_BUFFER_GET_RETRY 10 |
| 73 | #define LTTNG_UST_RING_BUFFER_RETRY_DELAY_MS 10 |
| 74 | #define RETRY_DELAY_MS 100 /* 100 ms. */ |
| 75 | |
| 76 | /* |
| 77 | * Non-static to ensure the compiler does not optimize away the xor. |
| 78 | */ |
| 79 | uint8_t lttng_crash_magic_xor[] = RB_CRASH_DUMP_ABI_MAGIC_XOR; |
| 80 | |
| 81 | /* |
| 82 | * Use POSIX SHM: shm_open(3) and shm_unlink(3). |
| 83 | * close(2) to close the fd returned by shm_open. |
| 84 | * shm_unlink releases the shared memory object name. |
| 85 | * ftruncate(2) sets the size of the memory object. |
| 86 | * mmap/munmap maps the shared memory obj to a virtual address in the |
| 87 | * calling proceess (should be done both in libust and consumer). |
| 88 | * See shm_overview(7) for details. |
| 89 | * Pass file descriptor returned by shm_open(3) to ltt-sessiond through |
| 90 | * a UNIX socket. |
| 91 | * |
| 92 | * Since we don't need to access the object using its name, we can |
| 93 | * immediately shm_unlink(3) it, and only keep the handle with its file |
| 94 | * descriptor. |
| 95 | */ |
| 96 | |
| 97 | /* |
| 98 | * Internal structure representing offsets to use at a sub-buffer switch. |
| 99 | */ |
| 100 | struct switch_offsets { |
| 101 | unsigned long begin, end, old; |
| 102 | size_t pre_header_padding, size; |
| 103 | unsigned int switch_new_start:1, switch_new_end:1, switch_old_start:1, |
| 104 | switch_old_end:1; |
| 105 | }; |
| 106 | |
| 107 | DEFINE_URCU_TLS(unsigned int, lib_ring_buffer_nesting); |
| 108 | |
| 109 | /* |
| 110 | * wakeup_fd_mutex protects wakeup fd use by timer from concurrent |
| 111 | * close. |
| 112 | */ |
| 113 | static pthread_mutex_t wakeup_fd_mutex = PTHREAD_MUTEX_INITIALIZER; |
| 114 | |
| 115 | static |
| 116 | void lib_ring_buffer_print_errors(struct lttng_ust_lib_ring_buffer_channel *chan, |
| 117 | struct lttng_ust_lib_ring_buffer *buf, int cpu, |
| 118 | struct lttng_ust_shm_handle *handle); |
| 119 | |
| 120 | /* |
| 121 | * Handle timer teardown race wrt memory free of private data by |
| 122 | * ring buffer signals are handled by a single thread, which permits |
| 123 | * a synchronization point between handling of each signal. |
| 124 | * Protected by the lock within the structure. |
| 125 | */ |
| 126 | struct timer_signal_data { |
| 127 | pthread_t tid; /* thread id managing signals */ |
| 128 | int setup_done; |
| 129 | int qs_done; |
| 130 | pthread_mutex_t lock; |
| 131 | }; |
| 132 | |
| 133 | static struct timer_signal_data timer_signal = { |
| 134 | .tid = 0, |
| 135 | .setup_done = 0, |
| 136 | .qs_done = 0, |
| 137 | .lock = PTHREAD_MUTEX_INITIALIZER, |
| 138 | }; |
| 139 | |
| 140 | static bool lttng_ust_allow_blocking; |
| 141 | |
| 142 | void lttng_ust_ringbuffer_set_allow_blocking(void) |
| 143 | { |
| 144 | lttng_ust_allow_blocking = true; |
| 145 | } |
| 146 | |
| 147 | /* Get blocking timeout, in ms */ |
| 148 | static int lttng_ust_ringbuffer_get_timeout(struct lttng_ust_lib_ring_buffer_channel *chan) |
| 149 | { |
| 150 | if (!lttng_ust_allow_blocking) |
| 151 | return 0; |
| 152 | return chan->u.s.blocking_timeout_ms; |
| 153 | } |
| 154 | |
| 155 | /** |
| 156 | * lib_ring_buffer_reset - Reset ring buffer to initial values. |
| 157 | * @buf: Ring buffer. |
| 158 | * |
| 159 | * Effectively empty the ring buffer. Should be called when the buffer is not |
| 160 | * used for writing. The ring buffer can be opened for reading, but the reader |
| 161 | * should not be using the iterator concurrently with reset. The previous |
| 162 | * current iterator record is reset. |
| 163 | */ |
| 164 | void lib_ring_buffer_reset(struct lttng_ust_lib_ring_buffer *buf, |
| 165 | struct lttng_ust_shm_handle *handle) |
| 166 | { |
| 167 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 168 | const struct lttng_ust_lib_ring_buffer_config *config; |
| 169 | unsigned int i; |
| 170 | |
| 171 | chan = shmp(handle, buf->backend.chan); |
| 172 | if (!chan) |
| 173 | return; |
| 174 | config = &chan->backend.config; |
| 175 | /* |
| 176 | * Reset iterator first. It will put the subbuffer if it currently holds |
| 177 | * it. |
| 178 | */ |
| 179 | v_set(config, &buf->offset, 0); |
| 180 | for (i = 0; i < chan->backend.num_subbuf; i++) { |
| 181 | struct commit_counters_hot *cc_hot; |
| 182 | struct commit_counters_cold *cc_cold; |
| 183 | uint64_t *ts_end; |
| 184 | |
| 185 | cc_hot = shmp_index(handle, buf->commit_hot, i); |
| 186 | if (!cc_hot) |
| 187 | return; |
| 188 | cc_cold = shmp_index(handle, buf->commit_cold, i); |
| 189 | if (!cc_cold) |
| 190 | return; |
| 191 | ts_end = shmp_index(handle, buf->ts_end, i); |
| 192 | if (!ts_end) |
| 193 | return; |
| 194 | v_set(config, &cc_hot->cc, 0); |
| 195 | v_set(config, &cc_hot->seq, 0); |
| 196 | v_set(config, &cc_cold->cc_sb, 0); |
| 197 | *ts_end = 0; |
| 198 | } |
| 199 | uatomic_set(&buf->consumed, 0); |
| 200 | uatomic_set(&buf->record_disabled, 0); |
| 201 | v_set(config, &buf->last_tsc, 0); |
| 202 | lib_ring_buffer_backend_reset(&buf->backend, handle); |
| 203 | /* Don't reset number of active readers */ |
| 204 | v_set(config, &buf->records_lost_full, 0); |
| 205 | v_set(config, &buf->records_lost_wrap, 0); |
| 206 | v_set(config, &buf->records_lost_big, 0); |
| 207 | v_set(config, &buf->records_count, 0); |
| 208 | v_set(config, &buf->records_overrun, 0); |
| 209 | buf->finalized = 0; |
| 210 | } |
| 211 | |
| 212 | /** |
| 213 | * channel_reset - Reset channel to initial values. |
| 214 | * @chan: Channel. |
| 215 | * |
| 216 | * Effectively empty the channel. Should be called when the channel is not used |
| 217 | * for writing. The channel can be opened for reading, but the reader should not |
| 218 | * be using the iterator concurrently with reset. The previous current iterator |
| 219 | * record is reset. |
| 220 | */ |
| 221 | void channel_reset(struct lttng_ust_lib_ring_buffer_channel *chan) |
| 222 | { |
| 223 | /* |
| 224 | * Reset iterators first. Will put the subbuffer if held for reading. |
| 225 | */ |
| 226 | uatomic_set(&chan->record_disabled, 0); |
| 227 | /* Don't reset commit_count_mask, still valid */ |
| 228 | channel_backend_reset(&chan->backend); |
| 229 | /* Don't reset switch/read timer interval */ |
| 230 | /* Don't reset notifiers and notifier enable bits */ |
| 231 | /* Don't reset reader reference count */ |
| 232 | } |
| 233 | |
| 234 | static |
| 235 | void init_crash_abi(const struct lttng_ust_lib_ring_buffer_config *config, |
| 236 | struct lttng_crash_abi *crash_abi, |
| 237 | struct lttng_ust_lib_ring_buffer *buf, |
| 238 | struct channel_backend *chanb, |
| 239 | struct shm_object *shmobj, |
| 240 | struct lttng_ust_shm_handle *handle) |
| 241 | { |
| 242 | int i; |
| 243 | |
| 244 | for (i = 0; i < RB_CRASH_DUMP_ABI_MAGIC_LEN; i++) |
| 245 | crash_abi->magic[i] = lttng_crash_magic_xor[i] ^ 0xFF; |
| 246 | crash_abi->mmap_length = shmobj->memory_map_size; |
| 247 | crash_abi->endian = RB_CRASH_ENDIAN; |
| 248 | crash_abi->major = RB_CRASH_DUMP_ABI_MAJOR; |
| 249 | crash_abi->minor = RB_CRASH_DUMP_ABI_MINOR; |
| 250 | crash_abi->word_size = sizeof(unsigned long); |
| 251 | crash_abi->layout_type = LTTNG_CRASH_TYPE_UST; |
| 252 | |
| 253 | /* Offset of fields */ |
| 254 | crash_abi->offset.prod_offset = |
| 255 | (uint32_t) ((char *) &buf->offset - (char *) buf); |
| 256 | crash_abi->offset.consumed_offset = |
| 257 | (uint32_t) ((char *) &buf->consumed - (char *) buf); |
| 258 | crash_abi->offset.commit_hot_array = |
| 259 | (uint32_t) ((char *) shmp(handle, buf->commit_hot) - (char *) buf); |
| 260 | crash_abi->offset.commit_hot_seq = |
| 261 | offsetof(struct commit_counters_hot, seq); |
| 262 | crash_abi->offset.buf_wsb_array = |
| 263 | (uint32_t) ((char *) shmp(handle, buf->backend.buf_wsb) - (char *) buf); |
| 264 | crash_abi->offset.buf_wsb_id = |
| 265 | offsetof(struct lttng_ust_lib_ring_buffer_backend_subbuffer, id); |
| 266 | crash_abi->offset.sb_array = |
| 267 | (uint32_t) ((char *) shmp(handle, buf->backend.array) - (char *) buf); |
| 268 | crash_abi->offset.sb_array_shmp_offset = |
| 269 | offsetof(struct lttng_ust_lib_ring_buffer_backend_pages_shmp, |
| 270 | shmp._ref.offset); |
| 271 | crash_abi->offset.sb_backend_p_offset = |
| 272 | offsetof(struct lttng_ust_lib_ring_buffer_backend_pages, |
| 273 | p._ref.offset); |
| 274 | |
| 275 | /* Field length */ |
| 276 | crash_abi->length.prod_offset = sizeof(buf->offset); |
| 277 | crash_abi->length.consumed_offset = sizeof(buf->consumed); |
| 278 | crash_abi->length.commit_hot_seq = |
| 279 | sizeof(((struct commit_counters_hot *) NULL)->seq); |
| 280 | crash_abi->length.buf_wsb_id = |
| 281 | sizeof(((struct lttng_ust_lib_ring_buffer_backend_subbuffer *) NULL)->id); |
| 282 | crash_abi->length.sb_array_shmp_offset = |
| 283 | sizeof(((struct lttng_ust_lib_ring_buffer_backend_pages_shmp *) NULL)->shmp._ref.offset); |
| 284 | crash_abi->length.sb_backend_p_offset = |
| 285 | sizeof(((struct lttng_ust_lib_ring_buffer_backend_pages *) NULL)->p._ref.offset); |
| 286 | |
| 287 | /* Array stride */ |
| 288 | crash_abi->stride.commit_hot_array = |
| 289 | sizeof(struct commit_counters_hot); |
| 290 | crash_abi->stride.buf_wsb_array = |
| 291 | sizeof(struct lttng_ust_lib_ring_buffer_backend_subbuffer); |
| 292 | crash_abi->stride.sb_array = |
| 293 | sizeof(struct lttng_ust_lib_ring_buffer_backend_pages_shmp); |
| 294 | |
| 295 | /* Buffer constants */ |
| 296 | crash_abi->buf_size = chanb->buf_size; |
| 297 | crash_abi->subbuf_size = chanb->subbuf_size; |
| 298 | crash_abi->num_subbuf = chanb->num_subbuf; |
| 299 | crash_abi->mode = (uint32_t) chanb->config.mode; |
| 300 | |
| 301 | if (config->cb.content_size_field) { |
| 302 | size_t offset, length; |
| 303 | |
| 304 | config->cb.content_size_field(config, &offset, &length); |
| 305 | crash_abi->offset.content_size = offset; |
| 306 | crash_abi->length.content_size = length; |
| 307 | } else { |
| 308 | crash_abi->offset.content_size = 0; |
| 309 | crash_abi->length.content_size = 0; |
| 310 | } |
| 311 | if (config->cb.packet_size_field) { |
| 312 | size_t offset, length; |
| 313 | |
| 314 | config->cb.packet_size_field(config, &offset, &length); |
| 315 | crash_abi->offset.packet_size = offset; |
| 316 | crash_abi->length.packet_size = length; |
| 317 | } else { |
| 318 | crash_abi->offset.packet_size = 0; |
| 319 | crash_abi->length.packet_size = 0; |
| 320 | } |
| 321 | } |
| 322 | |
| 323 | /* |
| 324 | * Must be called under cpu hotplug protection. |
| 325 | */ |
| 326 | int lib_ring_buffer_create(struct lttng_ust_lib_ring_buffer *buf, |
| 327 | struct channel_backend *chanb, int cpu, |
| 328 | struct lttng_ust_shm_handle *handle, |
| 329 | struct shm_object *shmobj) |
| 330 | { |
| 331 | const struct lttng_ust_lib_ring_buffer_config *config = &chanb->config; |
| 332 | struct lttng_ust_lib_ring_buffer_channel *chan = caa_container_of(chanb, |
| 333 | struct lttng_ust_lib_ring_buffer_channel, backend); |
| 334 | struct lttng_ust_lib_ring_buffer_backend_subbuffer *wsb; |
| 335 | struct lttng_ust_lib_ring_buffer_channel *shmp_chan; |
| 336 | struct commit_counters_hot *cc_hot; |
| 337 | void *priv = channel_get_private(chan); |
| 338 | size_t subbuf_header_size; |
| 339 | uint64_t tsc; |
| 340 | int ret; |
| 341 | |
| 342 | /* Test for cpu hotplug */ |
| 343 | if (buf->backend.allocated) |
| 344 | return 0; |
| 345 | |
| 346 | align_shm(shmobj, __alignof__(struct commit_counters_hot)); |
| 347 | set_shmp(buf->commit_hot, |
| 348 | zalloc_shm(shmobj, |
| 349 | sizeof(struct commit_counters_hot) * chan->backend.num_subbuf)); |
| 350 | if (!shmp(handle, buf->commit_hot)) { |
| 351 | return -ENOMEM; |
| 352 | } |
| 353 | |
| 354 | align_shm(shmobj, __alignof__(struct commit_counters_cold)); |
| 355 | set_shmp(buf->commit_cold, |
| 356 | zalloc_shm(shmobj, |
| 357 | sizeof(struct commit_counters_cold) * chan->backend.num_subbuf)); |
| 358 | if (!shmp(handle, buf->commit_cold)) { |
| 359 | ret = -ENOMEM; |
| 360 | goto free_commit; |
| 361 | } |
| 362 | |
| 363 | align_shm(shmobj, __alignof__(uint64_t)); |
| 364 | set_shmp(buf->ts_end, |
| 365 | zalloc_shm(shmobj, |
| 366 | sizeof(uint64_t) * chan->backend.num_subbuf)); |
| 367 | if (!shmp(handle, buf->ts_end)) { |
| 368 | ret = -ENOMEM; |
| 369 | goto free_commit_cold; |
| 370 | } |
| 371 | |
| 372 | |
| 373 | ret = lib_ring_buffer_backend_create(&buf->backend, &chan->backend, |
| 374 | cpu, handle, shmobj); |
| 375 | if (ret) { |
| 376 | goto free_init; |
| 377 | } |
| 378 | |
| 379 | /* |
| 380 | * Write the subbuffer header for first subbuffer so we know the total |
| 381 | * duration of data gathering. |
| 382 | */ |
| 383 | subbuf_header_size = config->cb.subbuffer_header_size(); |
| 384 | v_set(config, &buf->offset, subbuf_header_size); |
| 385 | wsb = shmp_index(handle, buf->backend.buf_wsb, 0); |
| 386 | if (!wsb) { |
| 387 | ret = -EPERM; |
| 388 | goto free_chanbuf; |
| 389 | } |
| 390 | subbuffer_id_clear_noref(config, &wsb->id); |
| 391 | shmp_chan = shmp(handle, buf->backend.chan); |
| 392 | if (!shmp_chan) { |
| 393 | ret = -EPERM; |
| 394 | goto free_chanbuf; |
| 395 | } |
| 396 | tsc = config->cb.ring_buffer_clock_read(shmp_chan); |
| 397 | config->cb.buffer_begin(buf, tsc, 0, handle); |
| 398 | cc_hot = shmp_index(handle, buf->commit_hot, 0); |
| 399 | if (!cc_hot) { |
| 400 | ret = -EPERM; |
| 401 | goto free_chanbuf; |
| 402 | } |
| 403 | v_add(config, subbuf_header_size, &cc_hot->cc); |
| 404 | v_add(config, subbuf_header_size, &cc_hot->seq); |
| 405 | |
| 406 | if (config->cb.buffer_create) { |
| 407 | ret = config->cb.buffer_create(buf, priv, cpu, chanb->name, handle); |
| 408 | if (ret) |
| 409 | goto free_chanbuf; |
| 410 | } |
| 411 | |
| 412 | init_crash_abi(config, &buf->crash_abi, buf, chanb, shmobj, handle); |
| 413 | |
| 414 | buf->backend.allocated = 1; |
| 415 | return 0; |
| 416 | |
| 417 | /* Error handling */ |
| 418 | free_init: |
| 419 | /* ts_end will be freed by shm teardown */ |
| 420 | free_commit_cold: |
| 421 | /* commit_cold will be freed by shm teardown */ |
| 422 | free_commit: |
| 423 | /* commit_hot will be freed by shm teardown */ |
| 424 | free_chanbuf: |
| 425 | return ret; |
| 426 | } |
| 427 | |
| 428 | static |
| 429 | void lib_ring_buffer_channel_switch_timer(int sig, siginfo_t *si, void *uc) |
| 430 | { |
| 431 | const struct lttng_ust_lib_ring_buffer_config *config; |
| 432 | struct lttng_ust_shm_handle *handle; |
| 433 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 434 | int cpu; |
| 435 | |
| 436 | assert(CMM_LOAD_SHARED(timer_signal.tid) == pthread_self()); |
| 437 | |
| 438 | chan = si->si_value.sival_ptr; |
| 439 | handle = chan->handle; |
| 440 | config = &chan->backend.config; |
| 441 | |
| 442 | DBG("Switch timer for channel %p\n", chan); |
| 443 | |
| 444 | /* |
| 445 | * Only flush buffers periodically if readers are active. |
| 446 | */ |
| 447 | pthread_mutex_lock(&wakeup_fd_mutex); |
| 448 | if (config->alloc == RING_BUFFER_ALLOC_PER_CPU) { |
| 449 | for_each_possible_cpu(cpu) { |
| 450 | struct lttng_ust_lib_ring_buffer *buf = |
| 451 | shmp(handle, chan->backend.buf[cpu].shmp); |
| 452 | |
| 453 | if (!buf) |
| 454 | goto end; |
| 455 | if (uatomic_read(&buf->active_readers)) |
| 456 | lib_ring_buffer_switch_slow(buf, SWITCH_ACTIVE, |
| 457 | chan->handle); |
| 458 | } |
| 459 | } else { |
| 460 | struct lttng_ust_lib_ring_buffer *buf = |
| 461 | shmp(handle, chan->backend.buf[0].shmp); |
| 462 | |
| 463 | if (!buf) |
| 464 | goto end; |
| 465 | if (uatomic_read(&buf->active_readers)) |
| 466 | lib_ring_buffer_switch_slow(buf, SWITCH_ACTIVE, |
| 467 | chan->handle); |
| 468 | } |
| 469 | end: |
| 470 | pthread_mutex_unlock(&wakeup_fd_mutex); |
| 471 | return; |
| 472 | } |
| 473 | |
| 474 | static |
| 475 | int lib_ring_buffer_poll_deliver(const struct lttng_ust_lib_ring_buffer_config *config, |
| 476 | struct lttng_ust_lib_ring_buffer *buf, |
| 477 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 478 | struct lttng_ust_shm_handle *handle) |
| 479 | { |
| 480 | unsigned long consumed_old, consumed_idx, commit_count, write_offset; |
| 481 | struct commit_counters_cold *cc_cold; |
| 482 | |
| 483 | consumed_old = uatomic_read(&buf->consumed); |
| 484 | consumed_idx = subbuf_index(consumed_old, chan); |
| 485 | cc_cold = shmp_index(handle, buf->commit_cold, consumed_idx); |
| 486 | if (!cc_cold) |
| 487 | return 0; |
| 488 | commit_count = v_read(config, &cc_cold->cc_sb); |
| 489 | /* |
| 490 | * No memory barrier here, since we are only interested |
| 491 | * in a statistically correct polling result. The next poll will |
| 492 | * get the data is we are racing. The mb() that ensures correct |
| 493 | * memory order is in get_subbuf. |
| 494 | */ |
| 495 | write_offset = v_read(config, &buf->offset); |
| 496 | |
| 497 | /* |
| 498 | * Check that the subbuffer we are trying to consume has been |
| 499 | * already fully committed. |
| 500 | */ |
| 501 | |
| 502 | if (((commit_count - chan->backend.subbuf_size) |
| 503 | & chan->commit_count_mask) |
| 504 | - (buf_trunc(consumed_old, chan) |
| 505 | >> chan->backend.num_subbuf_order) |
| 506 | != 0) |
| 507 | return 0; |
| 508 | |
| 509 | /* |
| 510 | * Check that we are not about to read the same subbuffer in |
| 511 | * which the writer head is. |
| 512 | */ |
| 513 | if (subbuf_trunc(write_offset, chan) - subbuf_trunc(consumed_old, chan) |
| 514 | == 0) |
| 515 | return 0; |
| 516 | |
| 517 | return 1; |
| 518 | } |
| 519 | |
| 520 | static |
| 521 | void lib_ring_buffer_wakeup(struct lttng_ust_lib_ring_buffer *buf, |
| 522 | struct lttng_ust_shm_handle *handle) |
| 523 | { |
| 524 | int wakeup_fd = shm_get_wakeup_fd(handle, &buf->self._ref); |
| 525 | sigset_t sigpipe_set, pending_set, old_set; |
| 526 | int ret, sigpipe_was_pending = 0; |
| 527 | |
| 528 | if (wakeup_fd < 0) |
| 529 | return; |
| 530 | |
| 531 | /* |
| 532 | * Wake-up the other end by writing a null byte in the pipe |
| 533 | * (non-blocking). Important note: Because writing into the |
| 534 | * pipe is non-blocking (and therefore we allow dropping wakeup |
| 535 | * data, as long as there is wakeup data present in the pipe |
| 536 | * buffer to wake up the consumer), the consumer should perform |
| 537 | * the following sequence for waiting: |
| 538 | * 1) empty the pipe (reads). |
| 539 | * 2) check if there is data in the buffer. |
| 540 | * 3) wait on the pipe (poll). |
| 541 | * |
| 542 | * Discard the SIGPIPE from write(), not disturbing any SIGPIPE |
| 543 | * that might be already pending. If a bogus SIGPIPE is sent to |
| 544 | * the entire process concurrently by a malicious user, it may |
| 545 | * be simply discarded. |
| 546 | */ |
| 547 | ret = sigemptyset(&pending_set); |
| 548 | assert(!ret); |
| 549 | /* |
| 550 | * sigpending returns the mask of signals that are _both_ |
| 551 | * blocked for the thread _and_ pending for either the thread or |
| 552 | * the entire process. |
| 553 | */ |
| 554 | ret = sigpending(&pending_set); |
| 555 | assert(!ret); |
| 556 | sigpipe_was_pending = sigismember(&pending_set, SIGPIPE); |
| 557 | /* |
| 558 | * If sigpipe was pending, it means it was already blocked, so |
| 559 | * no need to block it. |
| 560 | */ |
| 561 | if (!sigpipe_was_pending) { |
| 562 | ret = sigemptyset(&sigpipe_set); |
| 563 | assert(!ret); |
| 564 | ret = sigaddset(&sigpipe_set, SIGPIPE); |
| 565 | assert(!ret); |
| 566 | ret = pthread_sigmask(SIG_BLOCK, &sigpipe_set, &old_set); |
| 567 | assert(!ret); |
| 568 | } |
| 569 | do { |
| 570 | ret = write(wakeup_fd, "", 1); |
| 571 | } while (ret == -1L && errno == EINTR); |
| 572 | if (ret == -1L && errno == EPIPE && !sigpipe_was_pending) { |
| 573 | struct timespec timeout = { 0, 0 }; |
| 574 | do { |
| 575 | ret = sigtimedwait(&sigpipe_set, NULL, |
| 576 | &timeout); |
| 577 | } while (ret == -1L && errno == EINTR); |
| 578 | } |
| 579 | if (!sigpipe_was_pending) { |
| 580 | ret = pthread_sigmask(SIG_SETMASK, &old_set, NULL); |
| 581 | assert(!ret); |
| 582 | } |
| 583 | } |
| 584 | |
| 585 | static |
| 586 | void lib_ring_buffer_channel_do_read(struct lttng_ust_lib_ring_buffer_channel *chan) |
| 587 | { |
| 588 | const struct lttng_ust_lib_ring_buffer_config *config; |
| 589 | struct lttng_ust_shm_handle *handle; |
| 590 | int cpu; |
| 591 | |
| 592 | handle = chan->handle; |
| 593 | config = &chan->backend.config; |
| 594 | |
| 595 | /* |
| 596 | * Only flush buffers periodically if readers are active. |
| 597 | */ |
| 598 | pthread_mutex_lock(&wakeup_fd_mutex); |
| 599 | if (config->alloc == RING_BUFFER_ALLOC_PER_CPU) { |
| 600 | for_each_possible_cpu(cpu) { |
| 601 | struct lttng_ust_lib_ring_buffer *buf = |
| 602 | shmp(handle, chan->backend.buf[cpu].shmp); |
| 603 | |
| 604 | if (!buf) |
| 605 | goto end; |
| 606 | if (uatomic_read(&buf->active_readers) |
| 607 | && lib_ring_buffer_poll_deliver(config, buf, |
| 608 | chan, handle)) { |
| 609 | lib_ring_buffer_wakeup(buf, handle); |
| 610 | } |
| 611 | } |
| 612 | } else { |
| 613 | struct lttng_ust_lib_ring_buffer *buf = |
| 614 | shmp(handle, chan->backend.buf[0].shmp); |
| 615 | |
| 616 | if (!buf) |
| 617 | goto end; |
| 618 | if (uatomic_read(&buf->active_readers) |
| 619 | && lib_ring_buffer_poll_deliver(config, buf, |
| 620 | chan, handle)) { |
| 621 | lib_ring_buffer_wakeup(buf, handle); |
| 622 | } |
| 623 | } |
| 624 | end: |
| 625 | pthread_mutex_unlock(&wakeup_fd_mutex); |
| 626 | } |
| 627 | |
| 628 | static |
| 629 | void lib_ring_buffer_channel_read_timer(int sig, siginfo_t *si, void *uc) |
| 630 | { |
| 631 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 632 | |
| 633 | assert(CMM_LOAD_SHARED(timer_signal.tid) == pthread_self()); |
| 634 | chan = si->si_value.sival_ptr; |
| 635 | DBG("Read timer for channel %p\n", chan); |
| 636 | lib_ring_buffer_channel_do_read(chan); |
| 637 | return; |
| 638 | } |
| 639 | |
| 640 | static |
| 641 | void rb_setmask(sigset_t *mask) |
| 642 | { |
| 643 | int ret; |
| 644 | |
| 645 | ret = sigemptyset(mask); |
| 646 | if (ret) { |
| 647 | PERROR("sigemptyset"); |
| 648 | } |
| 649 | ret = sigaddset(mask, LTTNG_UST_RB_SIG_FLUSH); |
| 650 | if (ret) { |
| 651 | PERROR("sigaddset"); |
| 652 | } |
| 653 | ret = sigaddset(mask, LTTNG_UST_RB_SIG_READ); |
| 654 | if (ret) { |
| 655 | PERROR("sigaddset"); |
| 656 | } |
| 657 | ret = sigaddset(mask, LTTNG_UST_RB_SIG_TEARDOWN); |
| 658 | if (ret) { |
| 659 | PERROR("sigaddset"); |
| 660 | } |
| 661 | } |
| 662 | |
| 663 | static |
| 664 | void *sig_thread(void *arg) |
| 665 | { |
| 666 | sigset_t mask; |
| 667 | siginfo_t info; |
| 668 | int signr; |
| 669 | |
| 670 | /* Only self thread will receive signal mask. */ |
| 671 | rb_setmask(&mask); |
| 672 | CMM_STORE_SHARED(timer_signal.tid, pthread_self()); |
| 673 | |
| 674 | for (;;) { |
| 675 | signr = sigwaitinfo(&mask, &info); |
| 676 | if (signr == -1) { |
| 677 | if (errno != EINTR) |
| 678 | PERROR("sigwaitinfo"); |
| 679 | continue; |
| 680 | } |
| 681 | if (signr == LTTNG_UST_RB_SIG_FLUSH) { |
| 682 | lib_ring_buffer_channel_switch_timer(info.si_signo, |
| 683 | &info, NULL); |
| 684 | } else if (signr == LTTNG_UST_RB_SIG_READ) { |
| 685 | lib_ring_buffer_channel_read_timer(info.si_signo, |
| 686 | &info, NULL); |
| 687 | } else if (signr == LTTNG_UST_RB_SIG_TEARDOWN) { |
| 688 | cmm_smp_mb(); |
| 689 | CMM_STORE_SHARED(timer_signal.qs_done, 1); |
| 690 | cmm_smp_mb(); |
| 691 | } else { |
| 692 | ERR("Unexptected signal %d\n", info.si_signo); |
| 693 | } |
| 694 | } |
| 695 | return NULL; |
| 696 | } |
| 697 | |
| 698 | /* |
| 699 | * Ensure only a single thread listens on the timer signal. |
| 700 | */ |
| 701 | static |
| 702 | void lib_ring_buffer_setup_timer_thread(void) |
| 703 | { |
| 704 | pthread_t thread; |
| 705 | int ret; |
| 706 | |
| 707 | pthread_mutex_lock(&timer_signal.lock); |
| 708 | if (timer_signal.setup_done) |
| 709 | goto end; |
| 710 | |
| 711 | ret = pthread_create(&thread, NULL, &sig_thread, NULL); |
| 712 | if (ret) { |
| 713 | errno = ret; |
| 714 | PERROR("pthread_create"); |
| 715 | } |
| 716 | ret = pthread_detach(thread); |
| 717 | if (ret) { |
| 718 | errno = ret; |
| 719 | PERROR("pthread_detach"); |
| 720 | } |
| 721 | timer_signal.setup_done = 1; |
| 722 | end: |
| 723 | pthread_mutex_unlock(&timer_signal.lock); |
| 724 | } |
| 725 | |
| 726 | /* |
| 727 | * Wait for signal-handling thread quiescent state. |
| 728 | */ |
| 729 | static |
| 730 | void lib_ring_buffer_wait_signal_thread_qs(unsigned int signr) |
| 731 | { |
| 732 | sigset_t pending_set; |
| 733 | int ret; |
| 734 | |
| 735 | /* |
| 736 | * We need to be the only thread interacting with the thread |
| 737 | * that manages signals for teardown synchronization. |
| 738 | */ |
| 739 | pthread_mutex_lock(&timer_signal.lock); |
| 740 | |
| 741 | /* |
| 742 | * Ensure we don't have any signal queued for this channel. |
| 743 | */ |
| 744 | for (;;) { |
| 745 | ret = sigemptyset(&pending_set); |
| 746 | if (ret == -1) { |
| 747 | PERROR("sigemptyset"); |
| 748 | } |
| 749 | ret = sigpending(&pending_set); |
| 750 | if (ret == -1) { |
| 751 | PERROR("sigpending"); |
| 752 | } |
| 753 | if (!sigismember(&pending_set, signr)) |
| 754 | break; |
| 755 | caa_cpu_relax(); |
| 756 | } |
| 757 | |
| 758 | /* |
| 759 | * From this point, no new signal handler will be fired that |
| 760 | * would try to access "chan". However, we still need to wait |
| 761 | * for any currently executing handler to complete. |
| 762 | */ |
| 763 | cmm_smp_mb(); |
| 764 | CMM_STORE_SHARED(timer_signal.qs_done, 0); |
| 765 | cmm_smp_mb(); |
| 766 | |
| 767 | /* |
| 768 | * Kill with LTTNG_UST_RB_SIG_TEARDOWN, so signal management |
| 769 | * thread wakes up. |
| 770 | */ |
| 771 | kill(getpid(), LTTNG_UST_RB_SIG_TEARDOWN); |
| 772 | |
| 773 | while (!CMM_LOAD_SHARED(timer_signal.qs_done)) |
| 774 | caa_cpu_relax(); |
| 775 | cmm_smp_mb(); |
| 776 | |
| 777 | pthread_mutex_unlock(&timer_signal.lock); |
| 778 | } |
| 779 | |
| 780 | static |
| 781 | void lib_ring_buffer_channel_switch_timer_start(struct lttng_ust_lib_ring_buffer_channel *chan) |
| 782 | { |
| 783 | struct sigevent sev; |
| 784 | struct itimerspec its; |
| 785 | int ret; |
| 786 | |
| 787 | if (!chan->switch_timer_interval || chan->switch_timer_enabled) |
| 788 | return; |
| 789 | |
| 790 | chan->switch_timer_enabled = 1; |
| 791 | |
| 792 | lib_ring_buffer_setup_timer_thread(); |
| 793 | |
| 794 | memset(&sev, 0, sizeof(sev)); |
| 795 | sev.sigev_notify = SIGEV_SIGNAL; |
| 796 | sev.sigev_signo = LTTNG_UST_RB_SIG_FLUSH; |
| 797 | sev.sigev_value.sival_ptr = chan; |
| 798 | ret = timer_create(CLOCKID, &sev, &chan->switch_timer); |
| 799 | if (ret == -1) { |
| 800 | PERROR("timer_create"); |
| 801 | } |
| 802 | |
| 803 | its.it_value.tv_sec = chan->switch_timer_interval / 1000000; |
| 804 | its.it_value.tv_nsec = (chan->switch_timer_interval % 1000000) * 1000; |
| 805 | its.it_interval.tv_sec = its.it_value.tv_sec; |
| 806 | its.it_interval.tv_nsec = its.it_value.tv_nsec; |
| 807 | |
| 808 | ret = timer_settime(chan->switch_timer, 0, &its, NULL); |
| 809 | if (ret == -1) { |
| 810 | PERROR("timer_settime"); |
| 811 | } |
| 812 | } |
| 813 | |
| 814 | static |
| 815 | void lib_ring_buffer_channel_switch_timer_stop(struct lttng_ust_lib_ring_buffer_channel *chan) |
| 816 | { |
| 817 | int ret; |
| 818 | |
| 819 | if (!chan->switch_timer_interval || !chan->switch_timer_enabled) |
| 820 | return; |
| 821 | |
| 822 | ret = timer_delete(chan->switch_timer); |
| 823 | if (ret == -1) { |
| 824 | PERROR("timer_delete"); |
| 825 | } |
| 826 | |
| 827 | lib_ring_buffer_wait_signal_thread_qs(LTTNG_UST_RB_SIG_FLUSH); |
| 828 | |
| 829 | chan->switch_timer = 0; |
| 830 | chan->switch_timer_enabled = 0; |
| 831 | } |
| 832 | |
| 833 | static |
| 834 | void lib_ring_buffer_channel_read_timer_start(struct lttng_ust_lib_ring_buffer_channel *chan) |
| 835 | { |
| 836 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 837 | struct sigevent sev; |
| 838 | struct itimerspec its; |
| 839 | int ret; |
| 840 | |
| 841 | if (config->wakeup != RING_BUFFER_WAKEUP_BY_TIMER |
| 842 | || !chan->read_timer_interval || chan->read_timer_enabled) |
| 843 | return; |
| 844 | |
| 845 | chan->read_timer_enabled = 1; |
| 846 | |
| 847 | lib_ring_buffer_setup_timer_thread(); |
| 848 | |
| 849 | sev.sigev_notify = SIGEV_SIGNAL; |
| 850 | sev.sigev_signo = LTTNG_UST_RB_SIG_READ; |
| 851 | sev.sigev_value.sival_ptr = chan; |
| 852 | ret = timer_create(CLOCKID, &sev, &chan->read_timer); |
| 853 | if (ret == -1) { |
| 854 | PERROR("timer_create"); |
| 855 | } |
| 856 | |
| 857 | its.it_value.tv_sec = chan->read_timer_interval / 1000000; |
| 858 | its.it_value.tv_nsec = (chan->read_timer_interval % 1000000) * 1000; |
| 859 | its.it_interval.tv_sec = its.it_value.tv_sec; |
| 860 | its.it_interval.tv_nsec = its.it_value.tv_nsec; |
| 861 | |
| 862 | ret = timer_settime(chan->read_timer, 0, &its, NULL); |
| 863 | if (ret == -1) { |
| 864 | PERROR("timer_settime"); |
| 865 | } |
| 866 | } |
| 867 | |
| 868 | static |
| 869 | void lib_ring_buffer_channel_read_timer_stop(struct lttng_ust_lib_ring_buffer_channel *chan) |
| 870 | { |
| 871 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 872 | int ret; |
| 873 | |
| 874 | if (config->wakeup != RING_BUFFER_WAKEUP_BY_TIMER |
| 875 | || !chan->read_timer_interval || !chan->read_timer_enabled) |
| 876 | return; |
| 877 | |
| 878 | ret = timer_delete(chan->read_timer); |
| 879 | if (ret == -1) { |
| 880 | PERROR("timer_delete"); |
| 881 | } |
| 882 | |
| 883 | /* |
| 884 | * do one more check to catch data that has been written in the last |
| 885 | * timer period. |
| 886 | */ |
| 887 | lib_ring_buffer_channel_do_read(chan); |
| 888 | |
| 889 | lib_ring_buffer_wait_signal_thread_qs(LTTNG_UST_RB_SIG_READ); |
| 890 | |
| 891 | chan->read_timer = 0; |
| 892 | chan->read_timer_enabled = 0; |
| 893 | } |
| 894 | |
| 895 | static void channel_unregister_notifiers(struct lttng_ust_lib_ring_buffer_channel *chan, |
| 896 | struct lttng_ust_shm_handle *handle) |
| 897 | { |
| 898 | lib_ring_buffer_channel_switch_timer_stop(chan); |
| 899 | lib_ring_buffer_channel_read_timer_stop(chan); |
| 900 | } |
| 901 | |
| 902 | static void channel_print_errors(struct lttng_ust_lib_ring_buffer_channel *chan, |
| 903 | struct lttng_ust_shm_handle *handle) |
| 904 | { |
| 905 | const struct lttng_ust_lib_ring_buffer_config *config = |
| 906 | &chan->backend.config; |
| 907 | int cpu; |
| 908 | |
| 909 | if (config->alloc == RING_BUFFER_ALLOC_PER_CPU) { |
| 910 | for_each_possible_cpu(cpu) { |
| 911 | struct lttng_ust_lib_ring_buffer *buf = |
| 912 | shmp(handle, chan->backend.buf[cpu].shmp); |
| 913 | if (buf) |
| 914 | lib_ring_buffer_print_errors(chan, buf, cpu, handle); |
| 915 | } |
| 916 | } else { |
| 917 | struct lttng_ust_lib_ring_buffer *buf = |
| 918 | shmp(handle, chan->backend.buf[0].shmp); |
| 919 | |
| 920 | if (buf) |
| 921 | lib_ring_buffer_print_errors(chan, buf, -1, handle); |
| 922 | } |
| 923 | } |
| 924 | |
| 925 | static void channel_free(struct lttng_ust_lib_ring_buffer_channel *chan, |
| 926 | struct lttng_ust_shm_handle *handle, |
| 927 | int consumer) |
| 928 | { |
| 929 | channel_backend_free(&chan->backend, handle); |
| 930 | /* chan is freed by shm teardown */ |
| 931 | shm_object_table_destroy(handle->table, consumer); |
| 932 | free(handle); |
| 933 | } |
| 934 | |
| 935 | /** |
| 936 | * channel_create - Create channel. |
| 937 | * @config: ring buffer instance configuration |
| 938 | * @name: name of the channel |
| 939 | * @priv_data: ring buffer client private data area pointer (output) |
| 940 | * @priv_data_size: length, in bytes, of the private data area. |
| 941 | * @priv_data_init: initialization data for private data. |
| 942 | * @buf_addr: pointer the the beginning of the preallocated buffer contiguous |
| 943 | * address mapping. It is used only by RING_BUFFER_STATIC |
| 944 | * configuration. It can be set to NULL for other backends. |
| 945 | * @subbuf_size: subbuffer size |
| 946 | * @num_subbuf: number of subbuffers |
| 947 | * @switch_timer_interval: Time interval (in us) to fill sub-buffers with |
| 948 | * padding to let readers get those sub-buffers. |
| 949 | * Used for live streaming. |
| 950 | * @read_timer_interval: Time interval (in us) to wake up pending readers. |
| 951 | * @stream_fds: array of stream file descriptors. |
| 952 | * @nr_stream_fds: number of file descriptors in array. |
| 953 | * |
| 954 | * Holds cpu hotplug. |
| 955 | * Returns NULL on failure. |
| 956 | */ |
| 957 | struct lttng_ust_shm_handle *channel_create(const struct lttng_ust_lib_ring_buffer_config *config, |
| 958 | const char *name, |
| 959 | void **priv_data, |
| 960 | size_t priv_data_align, |
| 961 | size_t priv_data_size, |
| 962 | void *priv_data_init, |
| 963 | void *buf_addr, size_t subbuf_size, |
| 964 | size_t num_subbuf, unsigned int switch_timer_interval, |
| 965 | unsigned int read_timer_interval, |
| 966 | const int *stream_fds, int nr_stream_fds, |
| 967 | int64_t blocking_timeout) |
| 968 | { |
| 969 | int ret; |
| 970 | size_t shmsize, chansize; |
| 971 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 972 | struct lttng_ust_shm_handle *handle; |
| 973 | struct shm_object *shmobj; |
| 974 | unsigned int nr_streams; |
| 975 | int64_t blocking_timeout_ms; |
| 976 | |
| 977 | if (config->alloc == RING_BUFFER_ALLOC_PER_CPU) |
| 978 | nr_streams = num_possible_cpus(); |
| 979 | else |
| 980 | nr_streams = 1; |
| 981 | |
| 982 | if (nr_stream_fds != nr_streams) |
| 983 | return NULL; |
| 984 | |
| 985 | if (blocking_timeout < -1) { |
| 986 | return NULL; |
| 987 | } |
| 988 | /* usec to msec */ |
| 989 | if (blocking_timeout == -1) { |
| 990 | blocking_timeout_ms = -1; |
| 991 | } else { |
| 992 | blocking_timeout_ms = blocking_timeout / 1000; |
| 993 | if (blocking_timeout_ms != (int32_t) blocking_timeout_ms) { |
| 994 | return NULL; |
| 995 | } |
| 996 | } |
| 997 | |
| 998 | if (lib_ring_buffer_check_config(config, switch_timer_interval, |
| 999 | read_timer_interval)) |
| 1000 | return NULL; |
| 1001 | |
| 1002 | handle = zmalloc(sizeof(struct lttng_ust_shm_handle)); |
| 1003 | if (!handle) |
| 1004 | return NULL; |
| 1005 | |
| 1006 | /* Allocate table for channel + per-cpu buffers */ |
| 1007 | handle->table = shm_object_table_create(1 + num_possible_cpus()); |
| 1008 | if (!handle->table) |
| 1009 | goto error_table_alloc; |
| 1010 | |
| 1011 | /* Calculate the shm allocation layout */ |
| 1012 | shmsize = sizeof(struct lttng_ust_lib_ring_buffer_channel); |
| 1013 | shmsize += lttng_ust_offset_align(shmsize, __alignof__(struct lttng_ust_lib_ring_buffer_shmp)); |
| 1014 | shmsize += sizeof(struct lttng_ust_lib_ring_buffer_shmp) * nr_streams; |
| 1015 | chansize = shmsize; |
| 1016 | if (priv_data_align) |
| 1017 | shmsize += lttng_ust_offset_align(shmsize, priv_data_align); |
| 1018 | shmsize += priv_data_size; |
| 1019 | |
| 1020 | /* Allocate normal memory for channel (not shared) */ |
| 1021 | shmobj = shm_object_table_alloc(handle->table, shmsize, SHM_OBJECT_MEM, |
| 1022 | -1, -1); |
| 1023 | if (!shmobj) |
| 1024 | goto error_append; |
| 1025 | /* struct lttng_ust_lib_ring_buffer_channel is at object 0, offset 0 (hardcoded) */ |
| 1026 | set_shmp(handle->chan, zalloc_shm(shmobj, chansize)); |
| 1027 | assert(handle->chan._ref.index == 0); |
| 1028 | assert(handle->chan._ref.offset == 0); |
| 1029 | chan = shmp(handle, handle->chan); |
| 1030 | if (!chan) |
| 1031 | goto error_append; |
| 1032 | chan->nr_streams = nr_streams; |
| 1033 | |
| 1034 | /* space for private data */ |
| 1035 | if (priv_data_size) { |
| 1036 | DECLARE_SHMP(void, priv_data_alloc); |
| 1037 | |
| 1038 | align_shm(shmobj, priv_data_align); |
| 1039 | chan->priv_data_offset = shmobj->allocated_len; |
| 1040 | set_shmp(priv_data_alloc, zalloc_shm(shmobj, priv_data_size)); |
| 1041 | if (!shmp(handle, priv_data_alloc)) |
| 1042 | goto error_append; |
| 1043 | *priv_data = channel_get_private(chan); |
| 1044 | memcpy(*priv_data, priv_data_init, priv_data_size); |
| 1045 | } else { |
| 1046 | chan->priv_data_offset = -1; |
| 1047 | if (priv_data) |
| 1048 | *priv_data = NULL; |
| 1049 | } |
| 1050 | |
| 1051 | chan->u.s.blocking_timeout_ms = (int32_t) blocking_timeout_ms; |
| 1052 | |
| 1053 | ret = channel_backend_init(&chan->backend, name, config, |
| 1054 | subbuf_size, num_subbuf, handle, |
| 1055 | stream_fds); |
| 1056 | if (ret) |
| 1057 | goto error_backend_init; |
| 1058 | |
| 1059 | chan->handle = handle; |
| 1060 | chan->commit_count_mask = (~0UL >> chan->backend.num_subbuf_order); |
| 1061 | |
| 1062 | chan->switch_timer_interval = switch_timer_interval; |
| 1063 | chan->read_timer_interval = read_timer_interval; |
| 1064 | lib_ring_buffer_channel_switch_timer_start(chan); |
| 1065 | lib_ring_buffer_channel_read_timer_start(chan); |
| 1066 | |
| 1067 | return handle; |
| 1068 | |
| 1069 | error_backend_init: |
| 1070 | error_append: |
| 1071 | shm_object_table_destroy(handle->table, 1); |
| 1072 | error_table_alloc: |
| 1073 | free(handle); |
| 1074 | return NULL; |
| 1075 | } |
| 1076 | |
| 1077 | struct lttng_ust_shm_handle *channel_handle_create(void *data, |
| 1078 | uint64_t memory_map_size, |
| 1079 | int wakeup_fd) |
| 1080 | { |
| 1081 | struct lttng_ust_shm_handle *handle; |
| 1082 | struct shm_object *object; |
| 1083 | |
| 1084 | handle = zmalloc(sizeof(struct lttng_ust_shm_handle)); |
| 1085 | if (!handle) |
| 1086 | return NULL; |
| 1087 | |
| 1088 | /* Allocate table for channel + per-cpu buffers */ |
| 1089 | handle->table = shm_object_table_create(1 + num_possible_cpus()); |
| 1090 | if (!handle->table) |
| 1091 | goto error_table_alloc; |
| 1092 | /* Add channel object */ |
| 1093 | object = shm_object_table_append_mem(handle->table, data, |
| 1094 | memory_map_size, wakeup_fd); |
| 1095 | if (!object) |
| 1096 | goto error_table_object; |
| 1097 | /* struct lttng_ust_lib_ring_buffer_channel is at object 0, offset 0 (hardcoded) */ |
| 1098 | handle->chan._ref.index = 0; |
| 1099 | handle->chan._ref.offset = 0; |
| 1100 | return handle; |
| 1101 | |
| 1102 | error_table_object: |
| 1103 | shm_object_table_destroy(handle->table, 0); |
| 1104 | error_table_alloc: |
| 1105 | free(handle); |
| 1106 | return NULL; |
| 1107 | } |
| 1108 | |
| 1109 | int channel_handle_add_stream(struct lttng_ust_shm_handle *handle, |
| 1110 | int shm_fd, int wakeup_fd, uint32_t stream_nr, |
| 1111 | uint64_t memory_map_size) |
| 1112 | { |
| 1113 | struct shm_object *object; |
| 1114 | |
| 1115 | /* Add stream object */ |
| 1116 | object = shm_object_table_append_shm(handle->table, |
| 1117 | shm_fd, wakeup_fd, stream_nr, |
| 1118 | memory_map_size); |
| 1119 | if (!object) |
| 1120 | return -EINVAL; |
| 1121 | return 0; |
| 1122 | } |
| 1123 | |
| 1124 | unsigned int channel_handle_get_nr_streams(struct lttng_ust_shm_handle *handle) |
| 1125 | { |
| 1126 | assert(handle->table); |
| 1127 | return handle->table->allocated_len - 1; |
| 1128 | } |
| 1129 | |
| 1130 | static |
| 1131 | void channel_release(struct lttng_ust_lib_ring_buffer_channel *chan, struct lttng_ust_shm_handle *handle, |
| 1132 | int consumer) |
| 1133 | { |
| 1134 | channel_free(chan, handle, consumer); |
| 1135 | } |
| 1136 | |
| 1137 | /** |
| 1138 | * channel_destroy - Finalize, wait for q.s. and destroy channel. |
| 1139 | * @chan: channel to destroy |
| 1140 | * |
| 1141 | * Holds cpu hotplug. |
| 1142 | * Call "destroy" callback, finalize channels, decrement the channel |
| 1143 | * reference count. Note that when readers have completed data |
| 1144 | * consumption of finalized channels, get_subbuf() will return -ENODATA. |
| 1145 | * They should release their handle at that point. |
| 1146 | */ |
| 1147 | void channel_destroy(struct lttng_ust_lib_ring_buffer_channel *chan, struct lttng_ust_shm_handle *handle, |
| 1148 | int consumer) |
| 1149 | { |
| 1150 | if (consumer) { |
| 1151 | /* |
| 1152 | * Note: the consumer takes care of finalizing and |
| 1153 | * switching the buffers. |
| 1154 | */ |
| 1155 | channel_unregister_notifiers(chan, handle); |
| 1156 | /* |
| 1157 | * The consumer prints errors. |
| 1158 | */ |
| 1159 | channel_print_errors(chan, handle); |
| 1160 | } |
| 1161 | |
| 1162 | /* |
| 1163 | * sessiond/consumer are keeping a reference on the shm file |
| 1164 | * descriptor directly. No need to refcount. |
| 1165 | */ |
| 1166 | channel_release(chan, handle, consumer); |
| 1167 | return; |
| 1168 | } |
| 1169 | |
| 1170 | struct lttng_ust_lib_ring_buffer *channel_get_ring_buffer( |
| 1171 | const struct lttng_ust_lib_ring_buffer_config *config, |
| 1172 | struct lttng_ust_lib_ring_buffer_channel *chan, int cpu, |
| 1173 | struct lttng_ust_shm_handle *handle, |
| 1174 | int *shm_fd, int *wait_fd, |
| 1175 | int *wakeup_fd, |
| 1176 | uint64_t *memory_map_size) |
| 1177 | { |
| 1178 | struct shm_ref *ref; |
| 1179 | |
| 1180 | if (config->alloc == RING_BUFFER_ALLOC_GLOBAL) { |
| 1181 | cpu = 0; |
| 1182 | } else { |
| 1183 | if (cpu >= num_possible_cpus()) |
| 1184 | return NULL; |
| 1185 | } |
| 1186 | ref = &chan->backend.buf[cpu].shmp._ref; |
| 1187 | *shm_fd = shm_get_shm_fd(handle, ref); |
| 1188 | *wait_fd = shm_get_wait_fd(handle, ref); |
| 1189 | *wakeup_fd = shm_get_wakeup_fd(handle, ref); |
| 1190 | if (shm_get_shm_size(handle, ref, memory_map_size)) |
| 1191 | return NULL; |
| 1192 | return shmp(handle, chan->backend.buf[cpu].shmp); |
| 1193 | } |
| 1194 | |
| 1195 | int ring_buffer_channel_close_wait_fd(const struct lttng_ust_lib_ring_buffer_config *config, |
| 1196 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1197 | struct lttng_ust_shm_handle *handle) |
| 1198 | { |
| 1199 | struct shm_ref *ref; |
| 1200 | |
| 1201 | ref = &handle->chan._ref; |
| 1202 | return shm_close_wait_fd(handle, ref); |
| 1203 | } |
| 1204 | |
| 1205 | int ring_buffer_channel_close_wakeup_fd(const struct lttng_ust_lib_ring_buffer_config *config, |
| 1206 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1207 | struct lttng_ust_shm_handle *handle) |
| 1208 | { |
| 1209 | struct shm_ref *ref; |
| 1210 | |
| 1211 | ref = &handle->chan._ref; |
| 1212 | return shm_close_wakeup_fd(handle, ref); |
| 1213 | } |
| 1214 | |
| 1215 | int ring_buffer_stream_close_wait_fd(const struct lttng_ust_lib_ring_buffer_config *config, |
| 1216 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1217 | struct lttng_ust_shm_handle *handle, |
| 1218 | int cpu) |
| 1219 | { |
| 1220 | struct shm_ref *ref; |
| 1221 | |
| 1222 | if (config->alloc == RING_BUFFER_ALLOC_GLOBAL) { |
| 1223 | cpu = 0; |
| 1224 | } else { |
| 1225 | if (cpu >= num_possible_cpus()) |
| 1226 | return -EINVAL; |
| 1227 | } |
| 1228 | ref = &chan->backend.buf[cpu].shmp._ref; |
| 1229 | return shm_close_wait_fd(handle, ref); |
| 1230 | } |
| 1231 | |
| 1232 | int ring_buffer_stream_close_wakeup_fd(const struct lttng_ust_lib_ring_buffer_config *config, |
| 1233 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1234 | struct lttng_ust_shm_handle *handle, |
| 1235 | int cpu) |
| 1236 | { |
| 1237 | struct shm_ref *ref; |
| 1238 | int ret; |
| 1239 | |
| 1240 | if (config->alloc == RING_BUFFER_ALLOC_GLOBAL) { |
| 1241 | cpu = 0; |
| 1242 | } else { |
| 1243 | if (cpu >= num_possible_cpus()) |
| 1244 | return -EINVAL; |
| 1245 | } |
| 1246 | ref = &chan->backend.buf[cpu].shmp._ref; |
| 1247 | pthread_mutex_lock(&wakeup_fd_mutex); |
| 1248 | ret = shm_close_wakeup_fd(handle, ref); |
| 1249 | pthread_mutex_unlock(&wakeup_fd_mutex); |
| 1250 | return ret; |
| 1251 | } |
| 1252 | |
| 1253 | int lib_ring_buffer_open_read(struct lttng_ust_lib_ring_buffer *buf, |
| 1254 | struct lttng_ust_shm_handle *handle) |
| 1255 | { |
| 1256 | if (uatomic_cmpxchg(&buf->active_readers, 0, 1) != 0) |
| 1257 | return -EBUSY; |
| 1258 | cmm_smp_mb(); |
| 1259 | return 0; |
| 1260 | } |
| 1261 | |
| 1262 | void lib_ring_buffer_release_read(struct lttng_ust_lib_ring_buffer *buf, |
| 1263 | struct lttng_ust_shm_handle *handle) |
| 1264 | { |
| 1265 | struct lttng_ust_lib_ring_buffer_channel *chan = shmp(handle, buf->backend.chan); |
| 1266 | |
| 1267 | if (!chan) |
| 1268 | return; |
| 1269 | CHAN_WARN_ON(chan, uatomic_read(&buf->active_readers) != 1); |
| 1270 | cmm_smp_mb(); |
| 1271 | uatomic_dec(&buf->active_readers); |
| 1272 | } |
| 1273 | |
| 1274 | /** |
| 1275 | * lib_ring_buffer_snapshot - save subbuffer position snapshot (for read) |
| 1276 | * @buf: ring buffer |
| 1277 | * @consumed: consumed count indicating the position where to read |
| 1278 | * @produced: produced count, indicates position when to stop reading |
| 1279 | * |
| 1280 | * Returns -ENODATA if buffer is finalized, -EAGAIN if there is currently no |
| 1281 | * data to read at consumed position, or 0 if the get operation succeeds. |
| 1282 | */ |
| 1283 | |
| 1284 | int lib_ring_buffer_snapshot(struct lttng_ust_lib_ring_buffer *buf, |
| 1285 | unsigned long *consumed, unsigned long *produced, |
| 1286 | struct lttng_ust_shm_handle *handle) |
| 1287 | { |
| 1288 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 1289 | const struct lttng_ust_lib_ring_buffer_config *config; |
| 1290 | unsigned long consumed_cur, write_offset; |
| 1291 | int finalized; |
| 1292 | |
| 1293 | chan = shmp(handle, buf->backend.chan); |
| 1294 | if (!chan) |
| 1295 | return -EPERM; |
| 1296 | config = &chan->backend.config; |
| 1297 | finalized = CMM_ACCESS_ONCE(buf->finalized); |
| 1298 | /* |
| 1299 | * Read finalized before counters. |
| 1300 | */ |
| 1301 | cmm_smp_rmb(); |
| 1302 | consumed_cur = uatomic_read(&buf->consumed); |
| 1303 | /* |
| 1304 | * No need to issue a memory barrier between consumed count read and |
| 1305 | * write offset read, because consumed count can only change |
| 1306 | * concurrently in overwrite mode, and we keep a sequence counter |
| 1307 | * identifier derived from the write offset to check we are getting |
| 1308 | * the same sub-buffer we are expecting (the sub-buffers are atomically |
| 1309 | * "tagged" upon writes, tags are checked upon read). |
| 1310 | */ |
| 1311 | write_offset = v_read(config, &buf->offset); |
| 1312 | |
| 1313 | /* |
| 1314 | * Check that we are not about to read the same subbuffer in |
| 1315 | * which the writer head is. |
| 1316 | */ |
| 1317 | if (subbuf_trunc(write_offset, chan) - subbuf_trunc(consumed_cur, chan) |
| 1318 | == 0) |
| 1319 | goto nodata; |
| 1320 | |
| 1321 | *consumed = consumed_cur; |
| 1322 | *produced = subbuf_trunc(write_offset, chan); |
| 1323 | |
| 1324 | return 0; |
| 1325 | |
| 1326 | nodata: |
| 1327 | /* |
| 1328 | * The memory barriers __wait_event()/wake_up_interruptible() take care |
| 1329 | * of "raw_spin_is_locked" memory ordering. |
| 1330 | */ |
| 1331 | if (finalized) |
| 1332 | return -ENODATA; |
| 1333 | else |
| 1334 | return -EAGAIN; |
| 1335 | } |
| 1336 | |
| 1337 | /** |
| 1338 | * Performs the same function as lib_ring_buffer_snapshot(), but the positions |
| 1339 | * are saved regardless of whether the consumed and produced positions are |
| 1340 | * in the same subbuffer. |
| 1341 | * @buf: ring buffer |
| 1342 | * @consumed: consumed byte count indicating the last position read |
| 1343 | * @produced: produced byte count indicating the last position written |
| 1344 | * |
| 1345 | * This function is meant to provide information on the exact producer and |
| 1346 | * consumer positions without regard for the "snapshot" feature. |
| 1347 | */ |
| 1348 | int lib_ring_buffer_snapshot_sample_positions( |
| 1349 | struct lttng_ust_lib_ring_buffer *buf, |
| 1350 | unsigned long *consumed, unsigned long *produced, |
| 1351 | struct lttng_ust_shm_handle *handle) |
| 1352 | { |
| 1353 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 1354 | const struct lttng_ust_lib_ring_buffer_config *config; |
| 1355 | |
| 1356 | chan = shmp(handle, buf->backend.chan); |
| 1357 | if (!chan) |
| 1358 | return -EPERM; |
| 1359 | config = &chan->backend.config; |
| 1360 | cmm_smp_rmb(); |
| 1361 | *consumed = uatomic_read(&buf->consumed); |
| 1362 | /* |
| 1363 | * No need to issue a memory barrier between consumed count read and |
| 1364 | * write offset read, because consumed count can only change |
| 1365 | * concurrently in overwrite mode, and we keep a sequence counter |
| 1366 | * identifier derived from the write offset to check we are getting |
| 1367 | * the same sub-buffer we are expecting (the sub-buffers are atomically |
| 1368 | * "tagged" upon writes, tags are checked upon read). |
| 1369 | */ |
| 1370 | *produced = v_read(config, &buf->offset); |
| 1371 | return 0; |
| 1372 | } |
| 1373 | |
| 1374 | /** |
| 1375 | * lib_ring_buffer_move_consumer - move consumed counter forward |
| 1376 | * @buf: ring buffer |
| 1377 | * @consumed_new: new consumed count value |
| 1378 | */ |
| 1379 | void lib_ring_buffer_move_consumer(struct lttng_ust_lib_ring_buffer *buf, |
| 1380 | unsigned long consumed_new, |
| 1381 | struct lttng_ust_shm_handle *handle) |
| 1382 | { |
| 1383 | struct lttng_ust_lib_ring_buffer_backend *bufb = &buf->backend; |
| 1384 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 1385 | unsigned long consumed; |
| 1386 | |
| 1387 | chan = shmp(handle, bufb->chan); |
| 1388 | if (!chan) |
| 1389 | return; |
| 1390 | CHAN_WARN_ON(chan, uatomic_read(&buf->active_readers) != 1); |
| 1391 | |
| 1392 | /* |
| 1393 | * Only push the consumed value forward. |
| 1394 | * If the consumed cmpxchg fails, this is because we have been pushed by |
| 1395 | * the writer in flight recorder mode. |
| 1396 | */ |
| 1397 | consumed = uatomic_read(&buf->consumed); |
| 1398 | while ((long) consumed - (long) consumed_new < 0) |
| 1399 | consumed = uatomic_cmpxchg(&buf->consumed, consumed, |
| 1400 | consumed_new); |
| 1401 | } |
| 1402 | |
| 1403 | /** |
| 1404 | * lib_ring_buffer_get_subbuf - get exclusive access to subbuffer for reading |
| 1405 | * @buf: ring buffer |
| 1406 | * @consumed: consumed count indicating the position where to read |
| 1407 | * |
| 1408 | * Returns -ENODATA if buffer is finalized, -EAGAIN if there is currently no |
| 1409 | * data to read at consumed position, or 0 if the get operation succeeds. |
| 1410 | */ |
| 1411 | int lib_ring_buffer_get_subbuf(struct lttng_ust_lib_ring_buffer *buf, |
| 1412 | unsigned long consumed, |
| 1413 | struct lttng_ust_shm_handle *handle) |
| 1414 | { |
| 1415 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 1416 | const struct lttng_ust_lib_ring_buffer_config *config; |
| 1417 | unsigned long consumed_cur, consumed_idx, commit_count, write_offset; |
| 1418 | int ret, finalized, nr_retry = LTTNG_UST_RING_BUFFER_GET_RETRY; |
| 1419 | struct commit_counters_cold *cc_cold; |
| 1420 | |
| 1421 | chan = shmp(handle, buf->backend.chan); |
| 1422 | if (!chan) |
| 1423 | return -EPERM; |
| 1424 | config = &chan->backend.config; |
| 1425 | retry: |
| 1426 | finalized = CMM_ACCESS_ONCE(buf->finalized); |
| 1427 | /* |
| 1428 | * Read finalized before counters. |
| 1429 | */ |
| 1430 | cmm_smp_rmb(); |
| 1431 | consumed_cur = uatomic_read(&buf->consumed); |
| 1432 | consumed_idx = subbuf_index(consumed, chan); |
| 1433 | cc_cold = shmp_index(handle, buf->commit_cold, consumed_idx); |
| 1434 | if (!cc_cold) |
| 1435 | return -EPERM; |
| 1436 | commit_count = v_read(config, &cc_cold->cc_sb); |
| 1437 | /* |
| 1438 | * Make sure we read the commit count before reading the buffer |
| 1439 | * data and the write offset. Correct consumed offset ordering |
| 1440 | * wrt commit count is insured by the use of cmpxchg to update |
| 1441 | * the consumed offset. |
| 1442 | */ |
| 1443 | /* |
| 1444 | * Local rmb to match the remote wmb to read the commit count |
| 1445 | * before the buffer data and the write offset. |
| 1446 | */ |
| 1447 | cmm_smp_rmb(); |
| 1448 | |
| 1449 | write_offset = v_read(config, &buf->offset); |
| 1450 | |
| 1451 | /* |
| 1452 | * Check that the buffer we are getting is after or at consumed_cur |
| 1453 | * position. |
| 1454 | */ |
| 1455 | if ((long) subbuf_trunc(consumed, chan) |
| 1456 | - (long) subbuf_trunc(consumed_cur, chan) < 0) |
| 1457 | goto nodata; |
| 1458 | |
| 1459 | /* |
| 1460 | * Check that the subbuffer we are trying to consume has been |
| 1461 | * already fully committed. There are a few causes that can make |
| 1462 | * this unavailability situation occur: |
| 1463 | * |
| 1464 | * Temporary (short-term) situation: |
| 1465 | * - Application is running on a different CPU, between reserve |
| 1466 | * and commit ring buffer operations, |
| 1467 | * - Application is preempted between reserve and commit ring |
| 1468 | * buffer operations, |
| 1469 | * |
| 1470 | * Long-term situation: |
| 1471 | * - Application is stopped (SIGSTOP) between reserve and commit |
| 1472 | * ring buffer operations. Could eventually be resumed by |
| 1473 | * SIGCONT. |
| 1474 | * - Application is killed (SIGTERM, SIGINT, SIGKILL) between |
| 1475 | * reserve and commit ring buffer operation. |
| 1476 | * |
| 1477 | * From a consumer perspective, handling short-term |
| 1478 | * unavailability situations is performed by retrying a few |
| 1479 | * times after a delay. Handling long-term unavailability |
| 1480 | * situations is handled by failing to get the sub-buffer. |
| 1481 | * |
| 1482 | * In all of those situations, if the application is taking a |
| 1483 | * long time to perform its commit after ring buffer space |
| 1484 | * reservation, we can end up in a situation where the producer |
| 1485 | * will fill the ring buffer and try to write into the same |
| 1486 | * sub-buffer again (which has a missing commit). This is |
| 1487 | * handled by the producer in the sub-buffer switch handling |
| 1488 | * code of the reserve routine by detecting unbalanced |
| 1489 | * reserve/commit counters and discarding all further events |
| 1490 | * until the situation is resolved in those situations. Two |
| 1491 | * scenarios can occur: |
| 1492 | * |
| 1493 | * 1) The application causing the reserve/commit counters to be |
| 1494 | * unbalanced has been terminated. In this situation, all |
| 1495 | * further events will be discarded in the buffers, and no |
| 1496 | * further buffer data will be readable by the consumer |
| 1497 | * daemon. Tearing down the UST tracing session and starting |
| 1498 | * anew is a work-around for those situations. Note that this |
| 1499 | * only affects per-UID tracing. In per-PID tracing, the |
| 1500 | * application vanishes with the termination, and therefore |
| 1501 | * no more data needs to be written to the buffers. |
| 1502 | * 2) The application causing the unbalance has been delayed for |
| 1503 | * a long time, but will eventually try to increment the |
| 1504 | * commit counter after eventually writing to the sub-buffer. |
| 1505 | * This situation can cause events to be discarded until the |
| 1506 | * application resumes its operations. |
| 1507 | */ |
| 1508 | if (((commit_count - chan->backend.subbuf_size) |
| 1509 | & chan->commit_count_mask) |
| 1510 | - (buf_trunc(consumed, chan) |
| 1511 | >> chan->backend.num_subbuf_order) |
| 1512 | != 0) { |
| 1513 | if (nr_retry-- > 0) { |
| 1514 | if (nr_retry <= (LTTNG_UST_RING_BUFFER_GET_RETRY >> 1)) |
| 1515 | (void) poll(NULL, 0, LTTNG_UST_RING_BUFFER_RETRY_DELAY_MS); |
| 1516 | goto retry; |
| 1517 | } else { |
| 1518 | goto nodata; |
| 1519 | } |
| 1520 | } |
| 1521 | |
| 1522 | /* |
| 1523 | * Check that we are not about to read the same subbuffer in |
| 1524 | * which the writer head is. |
| 1525 | */ |
| 1526 | if (subbuf_trunc(write_offset, chan) - subbuf_trunc(consumed, chan) |
| 1527 | == 0) |
| 1528 | goto nodata; |
| 1529 | |
| 1530 | /* |
| 1531 | * Failure to get the subbuffer causes a busy-loop retry without going |
| 1532 | * to a wait queue. These are caused by short-lived race windows where |
| 1533 | * the writer is getting access to a subbuffer we were trying to get |
| 1534 | * access to. Also checks that the "consumed" buffer count we are |
| 1535 | * looking for matches the one contained in the subbuffer id. |
| 1536 | * |
| 1537 | * The short-lived race window described here can be affected by |
| 1538 | * application signals and preemption, thus requiring to bound |
| 1539 | * the loop to a maximum number of retry. |
| 1540 | */ |
| 1541 | ret = update_read_sb_index(config, &buf->backend, &chan->backend, |
| 1542 | consumed_idx, buf_trunc_val(consumed, chan), |
| 1543 | handle); |
| 1544 | if (ret) { |
| 1545 | if (nr_retry-- > 0) { |
| 1546 | if (nr_retry <= (LTTNG_UST_RING_BUFFER_GET_RETRY >> 1)) |
| 1547 | (void) poll(NULL, 0, LTTNG_UST_RING_BUFFER_RETRY_DELAY_MS); |
| 1548 | goto retry; |
| 1549 | } else { |
| 1550 | goto nodata; |
| 1551 | } |
| 1552 | } |
| 1553 | subbuffer_id_clear_noref(config, &buf->backend.buf_rsb.id); |
| 1554 | |
| 1555 | buf->get_subbuf_consumed = consumed; |
| 1556 | buf->get_subbuf = 1; |
| 1557 | |
| 1558 | return 0; |
| 1559 | |
| 1560 | nodata: |
| 1561 | /* |
| 1562 | * The memory barriers __wait_event()/wake_up_interruptible() take care |
| 1563 | * of "raw_spin_is_locked" memory ordering. |
| 1564 | */ |
| 1565 | if (finalized) |
| 1566 | return -ENODATA; |
| 1567 | else |
| 1568 | return -EAGAIN; |
| 1569 | } |
| 1570 | |
| 1571 | /** |
| 1572 | * lib_ring_buffer_put_subbuf - release exclusive subbuffer access |
| 1573 | * @buf: ring buffer |
| 1574 | */ |
| 1575 | void lib_ring_buffer_put_subbuf(struct lttng_ust_lib_ring_buffer *buf, |
| 1576 | struct lttng_ust_shm_handle *handle) |
| 1577 | { |
| 1578 | struct lttng_ust_lib_ring_buffer_backend *bufb = &buf->backend; |
| 1579 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 1580 | const struct lttng_ust_lib_ring_buffer_config *config; |
| 1581 | unsigned long sb_bindex, consumed_idx, consumed; |
| 1582 | struct lttng_ust_lib_ring_buffer_backend_pages_shmp *rpages; |
| 1583 | struct lttng_ust_lib_ring_buffer_backend_pages *backend_pages; |
| 1584 | |
| 1585 | chan = shmp(handle, bufb->chan); |
| 1586 | if (!chan) |
| 1587 | return; |
| 1588 | config = &chan->backend.config; |
| 1589 | CHAN_WARN_ON(chan, uatomic_read(&buf->active_readers) != 1); |
| 1590 | |
| 1591 | if (!buf->get_subbuf) { |
| 1592 | /* |
| 1593 | * Reader puts a subbuffer it did not get. |
| 1594 | */ |
| 1595 | CHAN_WARN_ON(chan, 1); |
| 1596 | return; |
| 1597 | } |
| 1598 | consumed = buf->get_subbuf_consumed; |
| 1599 | buf->get_subbuf = 0; |
| 1600 | |
| 1601 | /* |
| 1602 | * Clear the records_unread counter. (overruns counter) |
| 1603 | * Can still be non-zero if a file reader simply grabbed the data |
| 1604 | * without using iterators. |
| 1605 | * Can be below zero if an iterator is used on a snapshot more than |
| 1606 | * once. |
| 1607 | */ |
| 1608 | sb_bindex = subbuffer_id_get_index(config, bufb->buf_rsb.id); |
| 1609 | rpages = shmp_index(handle, bufb->array, sb_bindex); |
| 1610 | if (!rpages) |
| 1611 | return; |
| 1612 | backend_pages = shmp(handle, rpages->shmp); |
| 1613 | if (!backend_pages) |
| 1614 | return; |
| 1615 | v_add(config, v_read(config, &backend_pages->records_unread), |
| 1616 | &bufb->records_read); |
| 1617 | v_set(config, &backend_pages->records_unread, 0); |
| 1618 | CHAN_WARN_ON(chan, config->mode == RING_BUFFER_OVERWRITE |
| 1619 | && subbuffer_id_is_noref(config, bufb->buf_rsb.id)); |
| 1620 | subbuffer_id_set_noref(config, &bufb->buf_rsb.id); |
| 1621 | |
| 1622 | /* |
| 1623 | * Exchange the reader subbuffer with the one we put in its place in the |
| 1624 | * writer subbuffer table. Expect the original consumed count. If |
| 1625 | * update_read_sb_index fails, this is because the writer updated the |
| 1626 | * subbuffer concurrently. We should therefore keep the subbuffer we |
| 1627 | * currently have: it has become invalid to try reading this sub-buffer |
| 1628 | * consumed count value anyway. |
| 1629 | */ |
| 1630 | consumed_idx = subbuf_index(consumed, chan); |
| 1631 | update_read_sb_index(config, &buf->backend, &chan->backend, |
| 1632 | consumed_idx, buf_trunc_val(consumed, chan), |
| 1633 | handle); |
| 1634 | /* |
| 1635 | * update_read_sb_index return value ignored. Don't exchange sub-buffer |
| 1636 | * if the writer concurrently updated it. |
| 1637 | */ |
| 1638 | } |
| 1639 | |
| 1640 | /* |
| 1641 | * cons_offset is an iterator on all subbuffer offsets between the reader |
| 1642 | * position and the writer position. (inclusive) |
| 1643 | */ |
| 1644 | static |
| 1645 | void lib_ring_buffer_print_subbuffer_errors(struct lttng_ust_lib_ring_buffer *buf, |
| 1646 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1647 | unsigned long cons_offset, |
| 1648 | int cpu, |
| 1649 | struct lttng_ust_shm_handle *handle) |
| 1650 | { |
| 1651 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 1652 | unsigned long cons_idx, commit_count, commit_count_sb; |
| 1653 | struct commit_counters_hot *cc_hot; |
| 1654 | struct commit_counters_cold *cc_cold; |
| 1655 | |
| 1656 | cons_idx = subbuf_index(cons_offset, chan); |
| 1657 | cc_hot = shmp_index(handle, buf->commit_hot, cons_idx); |
| 1658 | if (!cc_hot) |
| 1659 | return; |
| 1660 | cc_cold = shmp_index(handle, buf->commit_cold, cons_idx); |
| 1661 | if (!cc_cold) |
| 1662 | return; |
| 1663 | commit_count = v_read(config, &cc_hot->cc); |
| 1664 | commit_count_sb = v_read(config, &cc_cold->cc_sb); |
| 1665 | |
| 1666 | if (subbuf_offset(commit_count, chan) != 0) |
| 1667 | DBG("ring buffer %s, cpu %d: " |
| 1668 | "commit count in subbuffer %lu,\n" |
| 1669 | "expecting multiples of %lu bytes\n" |
| 1670 | " [ %lu bytes committed, %lu bytes reader-visible ]\n", |
| 1671 | chan->backend.name, cpu, cons_idx, |
| 1672 | chan->backend.subbuf_size, |
| 1673 | commit_count, commit_count_sb); |
| 1674 | |
| 1675 | DBG("ring buffer: %s, cpu %d: %lu bytes committed\n", |
| 1676 | chan->backend.name, cpu, commit_count); |
| 1677 | } |
| 1678 | |
| 1679 | static |
| 1680 | void lib_ring_buffer_print_buffer_errors(struct lttng_ust_lib_ring_buffer *buf, |
| 1681 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1682 | void *priv, int cpu, |
| 1683 | struct lttng_ust_shm_handle *handle) |
| 1684 | { |
| 1685 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 1686 | unsigned long write_offset, cons_offset; |
| 1687 | |
| 1688 | /* |
| 1689 | * No need to order commit_count, write_offset and cons_offset reads |
| 1690 | * because we execute at teardown when no more writer nor reader |
| 1691 | * references are left. |
| 1692 | */ |
| 1693 | write_offset = v_read(config, &buf->offset); |
| 1694 | cons_offset = uatomic_read(&buf->consumed); |
| 1695 | if (write_offset != cons_offset) |
| 1696 | DBG("ring buffer %s, cpu %d: " |
| 1697 | "non-consumed data\n" |
| 1698 | " [ %lu bytes written, %lu bytes read ]\n", |
| 1699 | chan->backend.name, cpu, write_offset, cons_offset); |
| 1700 | |
| 1701 | for (cons_offset = uatomic_read(&buf->consumed); |
| 1702 | (long) (subbuf_trunc((unsigned long) v_read(config, &buf->offset), |
| 1703 | chan) |
| 1704 | - cons_offset) > 0; |
| 1705 | cons_offset = subbuf_align(cons_offset, chan)) |
| 1706 | lib_ring_buffer_print_subbuffer_errors(buf, chan, cons_offset, |
| 1707 | cpu, handle); |
| 1708 | } |
| 1709 | |
| 1710 | static |
| 1711 | void lib_ring_buffer_print_errors(struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1712 | struct lttng_ust_lib_ring_buffer *buf, int cpu, |
| 1713 | struct lttng_ust_shm_handle *handle) |
| 1714 | { |
| 1715 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 1716 | void *priv = channel_get_private(chan); |
| 1717 | |
| 1718 | if (!strcmp(chan->backend.name, "relay-metadata-mmap")) { |
| 1719 | DBG("ring buffer %s: %lu records written, " |
| 1720 | "%lu records overrun\n", |
| 1721 | chan->backend.name, |
| 1722 | v_read(config, &buf->records_count), |
| 1723 | v_read(config, &buf->records_overrun)); |
| 1724 | } else { |
| 1725 | DBG("ring buffer %s, cpu %d: %lu records written, " |
| 1726 | "%lu records overrun\n", |
| 1727 | chan->backend.name, cpu, |
| 1728 | v_read(config, &buf->records_count), |
| 1729 | v_read(config, &buf->records_overrun)); |
| 1730 | |
| 1731 | if (v_read(config, &buf->records_lost_full) |
| 1732 | || v_read(config, &buf->records_lost_wrap) |
| 1733 | || v_read(config, &buf->records_lost_big)) |
| 1734 | DBG("ring buffer %s, cpu %d: records were lost. Caused by:\n" |
| 1735 | " [ %lu buffer full, %lu nest buffer wrap-around, " |
| 1736 | "%lu event too big ]\n", |
| 1737 | chan->backend.name, cpu, |
| 1738 | v_read(config, &buf->records_lost_full), |
| 1739 | v_read(config, &buf->records_lost_wrap), |
| 1740 | v_read(config, &buf->records_lost_big)); |
| 1741 | } |
| 1742 | lib_ring_buffer_print_buffer_errors(buf, chan, priv, cpu, handle); |
| 1743 | } |
| 1744 | |
| 1745 | /* |
| 1746 | * lib_ring_buffer_switch_old_start: Populate old subbuffer header. |
| 1747 | * |
| 1748 | * Only executed by SWITCH_FLUSH, which can be issued while tracing is |
| 1749 | * active or at buffer finalization (destroy). |
| 1750 | */ |
| 1751 | static |
| 1752 | void lib_ring_buffer_switch_old_start(struct lttng_ust_lib_ring_buffer *buf, |
| 1753 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1754 | struct switch_offsets *offsets, |
| 1755 | uint64_t tsc, |
| 1756 | struct lttng_ust_shm_handle *handle) |
| 1757 | { |
| 1758 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 1759 | unsigned long oldidx = subbuf_index(offsets->old, chan); |
| 1760 | unsigned long commit_count; |
| 1761 | struct commit_counters_hot *cc_hot; |
| 1762 | |
| 1763 | config->cb.buffer_begin(buf, tsc, oldidx, handle); |
| 1764 | |
| 1765 | /* |
| 1766 | * Order all writes to buffer before the commit count update that will |
| 1767 | * determine that the subbuffer is full. |
| 1768 | */ |
| 1769 | cmm_smp_wmb(); |
| 1770 | cc_hot = shmp_index(handle, buf->commit_hot, oldidx); |
| 1771 | if (!cc_hot) |
| 1772 | return; |
| 1773 | v_add(config, config->cb.subbuffer_header_size(), |
| 1774 | &cc_hot->cc); |
| 1775 | commit_count = v_read(config, &cc_hot->cc); |
| 1776 | /* Check if the written buffer has to be delivered */ |
| 1777 | lib_ring_buffer_check_deliver(config, buf, chan, offsets->old, |
| 1778 | commit_count, oldidx, handle, tsc); |
| 1779 | lib_ring_buffer_write_commit_counter(config, buf, chan, |
| 1780 | offsets->old + config->cb.subbuffer_header_size(), |
| 1781 | commit_count, handle, cc_hot); |
| 1782 | } |
| 1783 | |
| 1784 | /* |
| 1785 | * lib_ring_buffer_switch_old_end: switch old subbuffer |
| 1786 | * |
| 1787 | * Note : offset_old should never be 0 here. It is ok, because we never perform |
| 1788 | * buffer switch on an empty subbuffer in SWITCH_ACTIVE mode. The caller |
| 1789 | * increments the offset_old value when doing a SWITCH_FLUSH on an empty |
| 1790 | * subbuffer. |
| 1791 | */ |
| 1792 | static |
| 1793 | void lib_ring_buffer_switch_old_end(struct lttng_ust_lib_ring_buffer *buf, |
| 1794 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1795 | struct switch_offsets *offsets, |
| 1796 | uint64_t tsc, |
| 1797 | struct lttng_ust_shm_handle *handle) |
| 1798 | { |
| 1799 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 1800 | unsigned long oldidx = subbuf_index(offsets->old - 1, chan); |
| 1801 | unsigned long commit_count, padding_size, data_size; |
| 1802 | struct commit_counters_hot *cc_hot; |
| 1803 | uint64_t *ts_end; |
| 1804 | |
| 1805 | data_size = subbuf_offset(offsets->old - 1, chan) + 1; |
| 1806 | padding_size = chan->backend.subbuf_size - data_size; |
| 1807 | subbuffer_set_data_size(config, &buf->backend, oldidx, data_size, |
| 1808 | handle); |
| 1809 | |
| 1810 | ts_end = shmp_index(handle, buf->ts_end, oldidx); |
| 1811 | if (!ts_end) |
| 1812 | return; |
| 1813 | /* |
| 1814 | * This is the last space reservation in that sub-buffer before |
| 1815 | * it gets delivered. This provides exclusive access to write to |
| 1816 | * this sub-buffer's ts_end. There are also no concurrent |
| 1817 | * readers of that ts_end because delivery of that sub-buffer is |
| 1818 | * postponed until the commit counter is incremented for the |
| 1819 | * current space reservation. |
| 1820 | */ |
| 1821 | *ts_end = tsc; |
| 1822 | |
| 1823 | /* |
| 1824 | * Order all writes to buffer and store to ts_end before the commit |
| 1825 | * count update that will determine that the subbuffer is full. |
| 1826 | */ |
| 1827 | cmm_smp_wmb(); |
| 1828 | cc_hot = shmp_index(handle, buf->commit_hot, oldidx); |
| 1829 | if (!cc_hot) |
| 1830 | return; |
| 1831 | v_add(config, padding_size, &cc_hot->cc); |
| 1832 | commit_count = v_read(config, &cc_hot->cc); |
| 1833 | lib_ring_buffer_check_deliver(config, buf, chan, offsets->old - 1, |
| 1834 | commit_count, oldidx, handle, tsc); |
| 1835 | lib_ring_buffer_write_commit_counter(config, buf, chan, |
| 1836 | offsets->old + padding_size, commit_count, handle, |
| 1837 | cc_hot); |
| 1838 | } |
| 1839 | |
| 1840 | /* |
| 1841 | * lib_ring_buffer_switch_new_start: Populate new subbuffer. |
| 1842 | * |
| 1843 | * This code can be executed unordered : writers may already have written to the |
| 1844 | * sub-buffer before this code gets executed, caution. The commit makes sure |
| 1845 | * that this code is executed before the deliver of this sub-buffer. |
| 1846 | */ |
| 1847 | static |
| 1848 | void lib_ring_buffer_switch_new_start(struct lttng_ust_lib_ring_buffer *buf, |
| 1849 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1850 | struct switch_offsets *offsets, |
| 1851 | uint64_t tsc, |
| 1852 | struct lttng_ust_shm_handle *handle) |
| 1853 | { |
| 1854 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 1855 | unsigned long beginidx = subbuf_index(offsets->begin, chan); |
| 1856 | unsigned long commit_count; |
| 1857 | struct commit_counters_hot *cc_hot; |
| 1858 | |
| 1859 | config->cb.buffer_begin(buf, tsc, beginidx, handle); |
| 1860 | |
| 1861 | /* |
| 1862 | * Order all writes to buffer before the commit count update that will |
| 1863 | * determine that the subbuffer is full. |
| 1864 | */ |
| 1865 | cmm_smp_wmb(); |
| 1866 | cc_hot = shmp_index(handle, buf->commit_hot, beginidx); |
| 1867 | if (!cc_hot) |
| 1868 | return; |
| 1869 | v_add(config, config->cb.subbuffer_header_size(), &cc_hot->cc); |
| 1870 | commit_count = v_read(config, &cc_hot->cc); |
| 1871 | /* Check if the written buffer has to be delivered */ |
| 1872 | lib_ring_buffer_check_deliver(config, buf, chan, offsets->begin, |
| 1873 | commit_count, beginidx, handle, tsc); |
| 1874 | lib_ring_buffer_write_commit_counter(config, buf, chan, |
| 1875 | offsets->begin + config->cb.subbuffer_header_size(), |
| 1876 | commit_count, handle, cc_hot); |
| 1877 | } |
| 1878 | |
| 1879 | /* |
| 1880 | * lib_ring_buffer_switch_new_end: finish switching current subbuffer |
| 1881 | * |
| 1882 | * Calls subbuffer_set_data_size() to set the data size of the current |
| 1883 | * sub-buffer. We do not need to perform check_deliver nor commit here, |
| 1884 | * since this task will be done by the "commit" of the event for which |
| 1885 | * we are currently doing the space reservation. |
| 1886 | */ |
| 1887 | static |
| 1888 | void lib_ring_buffer_switch_new_end(struct lttng_ust_lib_ring_buffer *buf, |
| 1889 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1890 | struct switch_offsets *offsets, |
| 1891 | uint64_t tsc, |
| 1892 | struct lttng_ust_shm_handle *handle) |
| 1893 | { |
| 1894 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 1895 | unsigned long endidx, data_size; |
| 1896 | uint64_t *ts_end; |
| 1897 | |
| 1898 | endidx = subbuf_index(offsets->end - 1, chan); |
| 1899 | data_size = subbuf_offset(offsets->end - 1, chan) + 1; |
| 1900 | subbuffer_set_data_size(config, &buf->backend, endidx, data_size, |
| 1901 | handle); |
| 1902 | ts_end = shmp_index(handle, buf->ts_end, endidx); |
| 1903 | if (!ts_end) |
| 1904 | return; |
| 1905 | /* |
| 1906 | * This is the last space reservation in that sub-buffer before |
| 1907 | * it gets delivered. This provides exclusive access to write to |
| 1908 | * this sub-buffer's ts_end. There are also no concurrent |
| 1909 | * readers of that ts_end because delivery of that sub-buffer is |
| 1910 | * postponed until the commit counter is incremented for the |
| 1911 | * current space reservation. |
| 1912 | */ |
| 1913 | *ts_end = tsc; |
| 1914 | } |
| 1915 | |
| 1916 | /* |
| 1917 | * Returns : |
| 1918 | * 0 if ok |
| 1919 | * !0 if execution must be aborted. |
| 1920 | */ |
| 1921 | static |
| 1922 | int lib_ring_buffer_try_switch_slow(enum switch_mode mode, |
| 1923 | struct lttng_ust_lib_ring_buffer *buf, |
| 1924 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 1925 | struct switch_offsets *offsets, |
| 1926 | uint64_t *tsc, |
| 1927 | struct lttng_ust_shm_handle *handle) |
| 1928 | { |
| 1929 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 1930 | unsigned long off, reserve_commit_diff; |
| 1931 | |
| 1932 | offsets->begin = v_read(config, &buf->offset); |
| 1933 | offsets->old = offsets->begin; |
| 1934 | offsets->switch_old_start = 0; |
| 1935 | off = subbuf_offset(offsets->begin, chan); |
| 1936 | |
| 1937 | *tsc = config->cb.ring_buffer_clock_read(chan); |
| 1938 | |
| 1939 | /* |
| 1940 | * Ensure we flush the header of an empty subbuffer when doing the |
| 1941 | * finalize (SWITCH_FLUSH). This ensures that we end up knowing the |
| 1942 | * total data gathering duration even if there were no records saved |
| 1943 | * after the last buffer switch. |
| 1944 | * In SWITCH_ACTIVE mode, switch the buffer when it contains events. |
| 1945 | * SWITCH_ACTIVE only flushes the current subbuffer, dealing with end of |
| 1946 | * subbuffer header as appropriate. |
| 1947 | * The next record that reserves space will be responsible for |
| 1948 | * populating the following subbuffer header. We choose not to populate |
| 1949 | * the next subbuffer header here because we want to be able to use |
| 1950 | * SWITCH_ACTIVE for periodical buffer flush, which must |
| 1951 | * guarantee that all the buffer content (records and header |
| 1952 | * timestamps) are visible to the reader. This is required for |
| 1953 | * quiescence guarantees for the fusion merge. |
| 1954 | */ |
| 1955 | if (mode != SWITCH_FLUSH && !off) |
| 1956 | return -1; /* we do not have to switch : buffer is empty */ |
| 1957 | |
| 1958 | if (caa_unlikely(off == 0)) { |
| 1959 | unsigned long sb_index, commit_count; |
| 1960 | struct commit_counters_cold *cc_cold; |
| 1961 | |
| 1962 | /* |
| 1963 | * We are performing a SWITCH_FLUSH. There may be concurrent |
| 1964 | * writes into the buffer if e.g. invoked while performing a |
| 1965 | * snapshot on an active trace. |
| 1966 | * |
| 1967 | * If the client does not save any header information |
| 1968 | * (sub-buffer header size == 0), don't switch empty subbuffer |
| 1969 | * on finalize, because it is invalid to deliver a completely |
| 1970 | * empty subbuffer. |
| 1971 | */ |
| 1972 | if (!config->cb.subbuffer_header_size()) |
| 1973 | return -1; |
| 1974 | |
| 1975 | /* Test new buffer integrity */ |
| 1976 | sb_index = subbuf_index(offsets->begin, chan); |
| 1977 | cc_cold = shmp_index(handle, buf->commit_cold, sb_index); |
| 1978 | if (!cc_cold) |
| 1979 | return -1; |
| 1980 | commit_count = v_read(config, &cc_cold->cc_sb); |
| 1981 | reserve_commit_diff = |
| 1982 | (buf_trunc(offsets->begin, chan) |
| 1983 | >> chan->backend.num_subbuf_order) |
| 1984 | - (commit_count & chan->commit_count_mask); |
| 1985 | if (caa_likely(reserve_commit_diff == 0)) { |
| 1986 | /* Next subbuffer not being written to. */ |
| 1987 | if (caa_unlikely(config->mode != RING_BUFFER_OVERWRITE && |
| 1988 | subbuf_trunc(offsets->begin, chan) |
| 1989 | - subbuf_trunc((unsigned long) |
| 1990 | uatomic_read(&buf->consumed), chan) |
| 1991 | >= chan->backend.buf_size)) { |
| 1992 | /* |
| 1993 | * We do not overwrite non consumed buffers |
| 1994 | * and we are full : don't switch. |
| 1995 | */ |
| 1996 | return -1; |
| 1997 | } else { |
| 1998 | /* |
| 1999 | * Next subbuffer not being written to, and we |
| 2000 | * are either in overwrite mode or the buffer is |
| 2001 | * not full. It's safe to write in this new |
| 2002 | * subbuffer. |
| 2003 | */ |
| 2004 | } |
| 2005 | } else { |
| 2006 | /* |
| 2007 | * Next subbuffer reserve offset does not match the |
| 2008 | * commit offset. Don't perform switch in |
| 2009 | * producer-consumer and overwrite mode. Caused by |
| 2010 | * either a writer OOPS or too many nested writes over a |
| 2011 | * reserve/commit pair. |
| 2012 | */ |
| 2013 | return -1; |
| 2014 | } |
| 2015 | |
| 2016 | /* |
| 2017 | * Need to write the subbuffer start header on finalize. |
| 2018 | */ |
| 2019 | offsets->switch_old_start = 1; |
| 2020 | } |
| 2021 | offsets->begin = subbuf_align(offsets->begin, chan); |
| 2022 | /* Note: old points to the next subbuf at offset 0 */ |
| 2023 | offsets->end = offsets->begin; |
| 2024 | return 0; |
| 2025 | } |
| 2026 | |
| 2027 | /* |
| 2028 | * Force a sub-buffer switch. This operation is completely reentrant : can be |
| 2029 | * called while tracing is active with absolutely no lock held. |
| 2030 | * |
| 2031 | * For RING_BUFFER_SYNC_PER_CPU ring buffers, as a v_cmpxchg is used for |
| 2032 | * some atomic operations, this function must be called from the CPU |
| 2033 | * which owns the buffer for a ACTIVE flush. However, for |
| 2034 | * RING_BUFFER_SYNC_GLOBAL ring buffers, this function can be called |
| 2035 | * from any CPU. |
| 2036 | */ |
| 2037 | void lib_ring_buffer_switch_slow(struct lttng_ust_lib_ring_buffer *buf, enum switch_mode mode, |
| 2038 | struct lttng_ust_shm_handle *handle) |
| 2039 | { |
| 2040 | struct lttng_ust_lib_ring_buffer_channel *chan; |
| 2041 | const struct lttng_ust_lib_ring_buffer_config *config; |
| 2042 | struct switch_offsets offsets; |
| 2043 | unsigned long oldidx; |
| 2044 | uint64_t tsc; |
| 2045 | |
| 2046 | chan = shmp(handle, buf->backend.chan); |
| 2047 | if (!chan) |
| 2048 | return; |
| 2049 | config = &chan->backend.config; |
| 2050 | |
| 2051 | offsets.size = 0; |
| 2052 | |
| 2053 | /* |
| 2054 | * Perform retryable operations. |
| 2055 | */ |
| 2056 | do { |
| 2057 | if (lib_ring_buffer_try_switch_slow(mode, buf, chan, &offsets, |
| 2058 | &tsc, handle)) |
| 2059 | return; /* Switch not needed */ |
| 2060 | } while (v_cmpxchg(config, &buf->offset, offsets.old, offsets.end) |
| 2061 | != offsets.old); |
| 2062 | |
| 2063 | /* |
| 2064 | * Atomically update last_tsc. This update races against concurrent |
| 2065 | * atomic updates, but the race will always cause supplementary full TSC |
| 2066 | * records, never the opposite (missing a full TSC record when it would |
| 2067 | * be needed). |
| 2068 | */ |
| 2069 | save_last_tsc(config, buf, tsc); |
| 2070 | |
| 2071 | /* |
| 2072 | * Push the reader if necessary |
| 2073 | */ |
| 2074 | lib_ring_buffer_reserve_push_reader(buf, chan, offsets.old); |
| 2075 | |
| 2076 | oldidx = subbuf_index(offsets.old, chan); |
| 2077 | lib_ring_buffer_clear_noref(config, &buf->backend, oldidx, handle); |
| 2078 | |
| 2079 | /* |
| 2080 | * May need to populate header start on SWITCH_FLUSH. |
| 2081 | */ |
| 2082 | if (offsets.switch_old_start) { |
| 2083 | lib_ring_buffer_switch_old_start(buf, chan, &offsets, tsc, handle); |
| 2084 | offsets.old += config->cb.subbuffer_header_size(); |
| 2085 | } |
| 2086 | |
| 2087 | /* |
| 2088 | * Switch old subbuffer. |
| 2089 | */ |
| 2090 | lib_ring_buffer_switch_old_end(buf, chan, &offsets, tsc, handle); |
| 2091 | } |
| 2092 | |
| 2093 | static |
| 2094 | bool handle_blocking_retry(int *timeout_left_ms) |
| 2095 | { |
| 2096 | int timeout = *timeout_left_ms, delay; |
| 2097 | |
| 2098 | if (caa_likely(!timeout)) |
| 2099 | return false; /* Do not retry, discard event. */ |
| 2100 | if (timeout < 0) /* Wait forever. */ |
| 2101 | delay = RETRY_DELAY_MS; |
| 2102 | else |
| 2103 | delay = min_t(int, timeout, RETRY_DELAY_MS); |
| 2104 | (void) poll(NULL, 0, delay); |
| 2105 | if (timeout > 0) |
| 2106 | *timeout_left_ms -= delay; |
| 2107 | return true; /* Retry. */ |
| 2108 | } |
| 2109 | |
| 2110 | /* |
| 2111 | * Returns : |
| 2112 | * 0 if ok |
| 2113 | * -ENOSPC if event size is too large for packet. |
| 2114 | * -ENOBUFS if there is currently not enough space in buffer for the event. |
| 2115 | * -EIO if data cannot be written into the buffer for any other reason. |
| 2116 | */ |
| 2117 | static |
| 2118 | int lib_ring_buffer_try_reserve_slow(struct lttng_ust_lib_ring_buffer *buf, |
| 2119 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 2120 | struct switch_offsets *offsets, |
| 2121 | struct lttng_ust_lib_ring_buffer_ctx *ctx, |
| 2122 | void *client_ctx) |
| 2123 | { |
| 2124 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 2125 | struct lttng_ust_shm_handle *handle = ctx->handle; |
| 2126 | unsigned long reserve_commit_diff, offset_cmp; |
| 2127 | int timeout_left_ms = lttng_ust_ringbuffer_get_timeout(chan); |
| 2128 | |
| 2129 | retry: |
| 2130 | offsets->begin = offset_cmp = v_read(config, &buf->offset); |
| 2131 | offsets->old = offsets->begin; |
| 2132 | offsets->switch_new_start = 0; |
| 2133 | offsets->switch_new_end = 0; |
| 2134 | offsets->switch_old_end = 0; |
| 2135 | offsets->pre_header_padding = 0; |
| 2136 | |
| 2137 | ctx->tsc = config->cb.ring_buffer_clock_read(chan); |
| 2138 | if ((int64_t) ctx->tsc == -EIO) |
| 2139 | return -EIO; |
| 2140 | |
| 2141 | if (last_tsc_overflow(config, buf, ctx->tsc)) |
| 2142 | ctx->rflags |= RING_BUFFER_RFLAG_FULL_TSC; |
| 2143 | |
| 2144 | if (caa_unlikely(subbuf_offset(offsets->begin, ctx->chan) == 0)) { |
| 2145 | offsets->switch_new_start = 1; /* For offsets->begin */ |
| 2146 | } else { |
| 2147 | offsets->size = config->cb.record_header_size(config, chan, |
| 2148 | offsets->begin, |
| 2149 | &offsets->pre_header_padding, |
| 2150 | ctx, client_ctx); |
| 2151 | offsets->size += |
| 2152 | lib_ring_buffer_align(offsets->begin + offsets->size, |
| 2153 | ctx->largest_align) |
| 2154 | + ctx->data_size; |
| 2155 | if (caa_unlikely(subbuf_offset(offsets->begin, chan) + |
| 2156 | offsets->size > chan->backend.subbuf_size)) { |
| 2157 | offsets->switch_old_end = 1; /* For offsets->old */ |
| 2158 | offsets->switch_new_start = 1; /* For offsets->begin */ |
| 2159 | } |
| 2160 | } |
| 2161 | if (caa_unlikely(offsets->switch_new_start)) { |
| 2162 | unsigned long sb_index, commit_count; |
| 2163 | struct commit_counters_cold *cc_cold; |
| 2164 | |
| 2165 | /* |
| 2166 | * We are typically not filling the previous buffer completely. |
| 2167 | */ |
| 2168 | if (caa_likely(offsets->switch_old_end)) |
| 2169 | offsets->begin = subbuf_align(offsets->begin, chan); |
| 2170 | offsets->begin = offsets->begin |
| 2171 | + config->cb.subbuffer_header_size(); |
| 2172 | /* Test new buffer integrity */ |
| 2173 | sb_index = subbuf_index(offsets->begin, chan); |
| 2174 | /* |
| 2175 | * Read buf->offset before buf->commit_cold[sb_index].cc_sb. |
| 2176 | * lib_ring_buffer_check_deliver() has the matching |
| 2177 | * memory barriers required around commit_cold cc_sb |
| 2178 | * updates to ensure reserve and commit counter updates |
| 2179 | * are not seen reordered when updated by another CPU. |
| 2180 | */ |
| 2181 | cmm_smp_rmb(); |
| 2182 | cc_cold = shmp_index(handle, buf->commit_cold, sb_index); |
| 2183 | if (!cc_cold) |
| 2184 | return -1; |
| 2185 | commit_count = v_read(config, &cc_cold->cc_sb); |
| 2186 | /* Read buf->commit_cold[sb_index].cc_sb before buf->offset. */ |
| 2187 | cmm_smp_rmb(); |
| 2188 | if (caa_unlikely(offset_cmp != v_read(config, &buf->offset))) { |
| 2189 | /* |
| 2190 | * The reserve counter have been concurrently updated |
| 2191 | * while we read the commit counter. This means the |
| 2192 | * commit counter we read might not match buf->offset |
| 2193 | * due to concurrent update. We therefore need to retry. |
| 2194 | */ |
| 2195 | goto retry; |
| 2196 | } |
| 2197 | reserve_commit_diff = |
| 2198 | (buf_trunc(offsets->begin, chan) |
| 2199 | >> chan->backend.num_subbuf_order) |
| 2200 | - (commit_count & chan->commit_count_mask); |
| 2201 | if (caa_likely(reserve_commit_diff == 0)) { |
| 2202 | /* Next subbuffer not being written to. */ |
| 2203 | if (caa_unlikely(config->mode != RING_BUFFER_OVERWRITE && |
| 2204 | subbuf_trunc(offsets->begin, chan) |
| 2205 | - subbuf_trunc((unsigned long) |
| 2206 | uatomic_read(&buf->consumed), chan) |
| 2207 | >= chan->backend.buf_size)) { |
| 2208 | unsigned long nr_lost; |
| 2209 | |
| 2210 | if (handle_blocking_retry(&timeout_left_ms)) |
| 2211 | goto retry; |
| 2212 | |
| 2213 | /* |
| 2214 | * We do not overwrite non consumed buffers |
| 2215 | * and we are full : record is lost. |
| 2216 | */ |
| 2217 | nr_lost = v_read(config, &buf->records_lost_full); |
| 2218 | v_inc(config, &buf->records_lost_full); |
| 2219 | if ((nr_lost & (DBG_PRINT_NR_LOST - 1)) == 0) { |
| 2220 | DBG("%lu or more records lost in (%s:%d) (buffer full)\n", |
| 2221 | nr_lost + 1, chan->backend.name, |
| 2222 | buf->backend.cpu); |
| 2223 | } |
| 2224 | return -ENOBUFS; |
| 2225 | } else { |
| 2226 | /* |
| 2227 | * Next subbuffer not being written to, and we |
| 2228 | * are either in overwrite mode or the buffer is |
| 2229 | * not full. It's safe to write in this new |
| 2230 | * subbuffer. |
| 2231 | */ |
| 2232 | } |
| 2233 | } else { |
| 2234 | unsigned long nr_lost; |
| 2235 | |
| 2236 | /* |
| 2237 | * Next subbuffer reserve offset does not match the |
| 2238 | * commit offset, and this did not involve update to the |
| 2239 | * reserve counter. Drop record in producer-consumer and |
| 2240 | * overwrite mode. Caused by either a writer OOPS or too |
| 2241 | * many nested writes over a reserve/commit pair. |
| 2242 | */ |
| 2243 | nr_lost = v_read(config, &buf->records_lost_wrap); |
| 2244 | v_inc(config, &buf->records_lost_wrap); |
| 2245 | if ((nr_lost & (DBG_PRINT_NR_LOST - 1)) == 0) { |
| 2246 | DBG("%lu or more records lost in (%s:%d) (wrap-around)\n", |
| 2247 | nr_lost + 1, chan->backend.name, |
| 2248 | buf->backend.cpu); |
| 2249 | } |
| 2250 | return -EIO; |
| 2251 | } |
| 2252 | offsets->size = |
| 2253 | config->cb.record_header_size(config, chan, |
| 2254 | offsets->begin, |
| 2255 | &offsets->pre_header_padding, |
| 2256 | ctx, client_ctx); |
| 2257 | offsets->size += |
| 2258 | lib_ring_buffer_align(offsets->begin + offsets->size, |
| 2259 | ctx->largest_align) |
| 2260 | + ctx->data_size; |
| 2261 | if (caa_unlikely(subbuf_offset(offsets->begin, chan) |
| 2262 | + offsets->size > chan->backend.subbuf_size)) { |
| 2263 | unsigned long nr_lost; |
| 2264 | |
| 2265 | /* |
| 2266 | * Record too big for subbuffers, report error, don't |
| 2267 | * complete the sub-buffer switch. |
| 2268 | */ |
| 2269 | nr_lost = v_read(config, &buf->records_lost_big); |
| 2270 | v_inc(config, &buf->records_lost_big); |
| 2271 | if ((nr_lost & (DBG_PRINT_NR_LOST - 1)) == 0) { |
| 2272 | DBG("%lu or more records lost in (%s:%d) record size " |
| 2273 | " of %zu bytes is too large for buffer\n", |
| 2274 | nr_lost + 1, chan->backend.name, |
| 2275 | buf->backend.cpu, offsets->size); |
| 2276 | } |
| 2277 | return -ENOSPC; |
| 2278 | } else { |
| 2279 | /* |
| 2280 | * We just made a successful buffer switch and the |
| 2281 | * record fits in the new subbuffer. Let's write. |
| 2282 | */ |
| 2283 | } |
| 2284 | } else { |
| 2285 | /* |
| 2286 | * Record fits in the current buffer and we are not on a switch |
| 2287 | * boundary. It's safe to write. |
| 2288 | */ |
| 2289 | } |
| 2290 | offsets->end = offsets->begin + offsets->size; |
| 2291 | |
| 2292 | if (caa_unlikely(subbuf_offset(offsets->end, chan) == 0)) { |
| 2293 | /* |
| 2294 | * The offset_end will fall at the very beginning of the next |
| 2295 | * subbuffer. |
| 2296 | */ |
| 2297 | offsets->switch_new_end = 1; /* For offsets->begin */ |
| 2298 | } |
| 2299 | return 0; |
| 2300 | } |
| 2301 | |
| 2302 | /** |
| 2303 | * lib_ring_buffer_reserve_slow - Atomic slot reservation in a buffer. |
| 2304 | * @ctx: ring buffer context. |
| 2305 | * |
| 2306 | * Return : -NOBUFS if not enough space, -ENOSPC if event size too large, |
| 2307 | * -EIO for other errors, else returns 0. |
| 2308 | * It will take care of sub-buffer switching. |
| 2309 | */ |
| 2310 | int lib_ring_buffer_reserve_slow(struct lttng_ust_lib_ring_buffer_ctx *ctx, |
| 2311 | void *client_ctx) |
| 2312 | { |
| 2313 | struct lttng_ust_lib_ring_buffer_channel *chan = ctx->chan; |
| 2314 | struct lttng_ust_shm_handle *handle = ctx->handle; |
| 2315 | const struct lttng_ust_lib_ring_buffer_config *config = &chan->backend.config; |
| 2316 | struct lttng_ust_lib_ring_buffer *buf; |
| 2317 | struct switch_offsets offsets; |
| 2318 | int ret; |
| 2319 | |
| 2320 | if (config->alloc == RING_BUFFER_ALLOC_PER_CPU) |
| 2321 | buf = shmp(handle, chan->backend.buf[ctx->cpu].shmp); |
| 2322 | else |
| 2323 | buf = shmp(handle, chan->backend.buf[0].shmp); |
| 2324 | if (!buf) |
| 2325 | return -EIO; |
| 2326 | ctx->buf = buf; |
| 2327 | |
| 2328 | offsets.size = 0; |
| 2329 | |
| 2330 | do { |
| 2331 | ret = lib_ring_buffer_try_reserve_slow(buf, chan, &offsets, |
| 2332 | ctx, client_ctx); |
| 2333 | if (caa_unlikely(ret)) |
| 2334 | return ret; |
| 2335 | } while (caa_unlikely(v_cmpxchg(config, &buf->offset, offsets.old, |
| 2336 | offsets.end) |
| 2337 | != offsets.old)); |
| 2338 | |
| 2339 | /* |
| 2340 | * Atomically update last_tsc. This update races against concurrent |
| 2341 | * atomic updates, but the race will always cause supplementary full TSC |
| 2342 | * records, never the opposite (missing a full TSC record when it would |
| 2343 | * be needed). |
| 2344 | */ |
| 2345 | save_last_tsc(config, buf, ctx->tsc); |
| 2346 | |
| 2347 | /* |
| 2348 | * Push the reader if necessary |
| 2349 | */ |
| 2350 | lib_ring_buffer_reserve_push_reader(buf, chan, offsets.end - 1); |
| 2351 | |
| 2352 | /* |
| 2353 | * Clear noref flag for this subbuffer. |
| 2354 | */ |
| 2355 | lib_ring_buffer_clear_noref(config, &buf->backend, |
| 2356 | subbuf_index(offsets.end - 1, chan), |
| 2357 | handle); |
| 2358 | |
| 2359 | /* |
| 2360 | * Switch old subbuffer if needed. |
| 2361 | */ |
| 2362 | if (caa_unlikely(offsets.switch_old_end)) { |
| 2363 | lib_ring_buffer_clear_noref(config, &buf->backend, |
| 2364 | subbuf_index(offsets.old - 1, chan), |
| 2365 | handle); |
| 2366 | lib_ring_buffer_switch_old_end(buf, chan, &offsets, ctx->tsc, handle); |
| 2367 | } |
| 2368 | |
| 2369 | /* |
| 2370 | * Populate new subbuffer. |
| 2371 | */ |
| 2372 | if (caa_unlikely(offsets.switch_new_start)) |
| 2373 | lib_ring_buffer_switch_new_start(buf, chan, &offsets, ctx->tsc, handle); |
| 2374 | |
| 2375 | if (caa_unlikely(offsets.switch_new_end)) |
| 2376 | lib_ring_buffer_switch_new_end(buf, chan, &offsets, ctx->tsc, handle); |
| 2377 | |
| 2378 | ctx->slot_size = offsets.size; |
| 2379 | ctx->pre_offset = offsets.begin; |
| 2380 | ctx->buf_offset = offsets.begin + offsets.pre_header_padding; |
| 2381 | return 0; |
| 2382 | } |
| 2383 | |
| 2384 | static |
| 2385 | void lib_ring_buffer_vmcore_check_deliver(const struct lttng_ust_lib_ring_buffer_config *config, |
| 2386 | struct lttng_ust_lib_ring_buffer *buf, |
| 2387 | unsigned long commit_count, |
| 2388 | unsigned long idx, |
| 2389 | struct lttng_ust_shm_handle *handle) |
| 2390 | { |
| 2391 | struct commit_counters_hot *cc_hot; |
| 2392 | |
| 2393 | if (config->oops != RING_BUFFER_OOPS_CONSISTENCY) |
| 2394 | return; |
| 2395 | cc_hot = shmp_index(handle, buf->commit_hot, idx); |
| 2396 | if (!cc_hot) |
| 2397 | return; |
| 2398 | v_set(config, &cc_hot->seq, commit_count); |
| 2399 | } |
| 2400 | |
| 2401 | /* |
| 2402 | * The ring buffer can count events recorded and overwritten per buffer, |
| 2403 | * but it is disabled by default due to its performance overhead. |
| 2404 | */ |
| 2405 | #ifdef LTTNG_RING_BUFFER_COUNT_EVENTS |
| 2406 | static |
| 2407 | void deliver_count_events(const struct lttng_ust_lib_ring_buffer_config *config, |
| 2408 | struct lttng_ust_lib_ring_buffer *buf, |
| 2409 | unsigned long idx, |
| 2410 | struct lttng_ust_shm_handle *handle) |
| 2411 | { |
| 2412 | v_add(config, subbuffer_get_records_count(config, |
| 2413 | &buf->backend, idx, handle), |
| 2414 | &buf->records_count); |
| 2415 | v_add(config, subbuffer_count_records_overrun(config, |
| 2416 | &buf->backend, idx, handle), |
| 2417 | &buf->records_overrun); |
| 2418 | } |
| 2419 | #else /* LTTNG_RING_BUFFER_COUNT_EVENTS */ |
| 2420 | static |
| 2421 | void deliver_count_events(const struct lttng_ust_lib_ring_buffer_config *config, |
| 2422 | struct lttng_ust_lib_ring_buffer *buf, |
| 2423 | unsigned long idx, |
| 2424 | struct lttng_ust_shm_handle *handle) |
| 2425 | { |
| 2426 | } |
| 2427 | #endif /* #else LTTNG_RING_BUFFER_COUNT_EVENTS */ |
| 2428 | |
| 2429 | void lib_ring_buffer_check_deliver_slow(const struct lttng_ust_lib_ring_buffer_config *config, |
| 2430 | struct lttng_ust_lib_ring_buffer *buf, |
| 2431 | struct lttng_ust_lib_ring_buffer_channel *chan, |
| 2432 | unsigned long offset, |
| 2433 | unsigned long commit_count, |
| 2434 | unsigned long idx, |
| 2435 | struct lttng_ust_shm_handle *handle, |
| 2436 | uint64_t tsc) |
| 2437 | { |
| 2438 | unsigned long old_commit_count = commit_count |
| 2439 | - chan->backend.subbuf_size; |
| 2440 | struct commit_counters_cold *cc_cold; |
| 2441 | |
| 2442 | /* |
| 2443 | * If we succeeded at updating cc_sb below, we are the subbuffer |
| 2444 | * writer delivering the subbuffer. Deals with concurrent |
| 2445 | * updates of the "cc" value without adding a add_return atomic |
| 2446 | * operation to the fast path. |
| 2447 | * |
| 2448 | * We are doing the delivery in two steps: |
| 2449 | * - First, we cmpxchg() cc_sb to the new value |
| 2450 | * old_commit_count + 1. This ensures that we are the only |
| 2451 | * subbuffer user successfully filling the subbuffer, but we |
| 2452 | * do _not_ set the cc_sb value to "commit_count" yet. |
| 2453 | * Therefore, other writers that would wrap around the ring |
| 2454 | * buffer and try to start writing to our subbuffer would |
| 2455 | * have to drop records, because it would appear as |
| 2456 | * non-filled. |
| 2457 | * We therefore have exclusive access to the subbuffer control |
| 2458 | * structures. This mutual exclusion with other writers is |
| 2459 | * crucially important to perform record overruns count in |
| 2460 | * flight recorder mode locklessly. |
| 2461 | * - When we are ready to release the subbuffer (either for |
| 2462 | * reading or for overrun by other writers), we simply set the |
| 2463 | * cc_sb value to "commit_count" and perform delivery. |
| 2464 | * |
| 2465 | * The subbuffer size is least 2 bytes (minimum size: 1 page). |
| 2466 | * This guarantees that old_commit_count + 1 != commit_count. |
| 2467 | */ |
| 2468 | |
| 2469 | /* |
| 2470 | * Order prior updates to reserve count prior to the |
| 2471 | * commit_cold cc_sb update. |
| 2472 | */ |
| 2473 | cmm_smp_wmb(); |
| 2474 | cc_cold = shmp_index(handle, buf->commit_cold, idx); |
| 2475 | if (!cc_cold) |
| 2476 | return; |
| 2477 | if (caa_likely(v_cmpxchg(config, &cc_cold->cc_sb, |
| 2478 | old_commit_count, old_commit_count + 1) |
| 2479 | == old_commit_count)) { |
| 2480 | uint64_t *ts_end; |
| 2481 | |
| 2482 | /* |
| 2483 | * Start of exclusive subbuffer access. We are |
| 2484 | * guaranteed to be the last writer in this subbuffer |
| 2485 | * and any other writer trying to access this subbuffer |
| 2486 | * in this state is required to drop records. |
| 2487 | * |
| 2488 | * We can read the ts_end for the current sub-buffer |
| 2489 | * which has been saved by the very last space |
| 2490 | * reservation for the current sub-buffer. |
| 2491 | * |
| 2492 | * Order increment of commit counter before reading ts_end. |
| 2493 | */ |
| 2494 | cmm_smp_mb(); |
| 2495 | ts_end = shmp_index(handle, buf->ts_end, idx); |
| 2496 | if (!ts_end) |
| 2497 | return; |
| 2498 | deliver_count_events(config, buf, idx, handle); |
| 2499 | config->cb.buffer_end(buf, *ts_end, idx, |
| 2500 | lib_ring_buffer_get_data_size(config, |
| 2501 | buf, |
| 2502 | idx, |
| 2503 | handle), |
| 2504 | handle); |
| 2505 | |
| 2506 | /* |
| 2507 | * Increment the packet counter while we have exclusive |
| 2508 | * access. |
| 2509 | */ |
| 2510 | subbuffer_inc_packet_count(config, &buf->backend, idx, handle); |
| 2511 | |
| 2512 | /* |
| 2513 | * Set noref flag and offset for this subbuffer id. |
| 2514 | * Contains a memory barrier that ensures counter stores |
| 2515 | * are ordered before set noref and offset. |
| 2516 | */ |
| 2517 | lib_ring_buffer_set_noref_offset(config, &buf->backend, idx, |
| 2518 | buf_trunc_val(offset, chan), handle); |
| 2519 | |
| 2520 | /* |
| 2521 | * Order set_noref and record counter updates before the |
| 2522 | * end of subbuffer exclusive access. Orders with |
| 2523 | * respect to writers coming into the subbuffer after |
| 2524 | * wrap around, and also order wrt concurrent readers. |
| 2525 | */ |
| 2526 | cmm_smp_mb(); |
| 2527 | /* End of exclusive subbuffer access */ |
| 2528 | v_set(config, &cc_cold->cc_sb, commit_count); |
| 2529 | /* |
| 2530 | * Order later updates to reserve count after |
| 2531 | * the commit cold cc_sb update. |
| 2532 | */ |
| 2533 | cmm_smp_wmb(); |
| 2534 | lib_ring_buffer_vmcore_check_deliver(config, buf, |
| 2535 | commit_count, idx, handle); |
| 2536 | |
| 2537 | /* |
| 2538 | * RING_BUFFER_WAKEUP_BY_WRITER wakeup is not lock-free. |
| 2539 | */ |
| 2540 | if (config->wakeup == RING_BUFFER_WAKEUP_BY_WRITER |
| 2541 | && uatomic_read(&buf->active_readers) |
| 2542 | && lib_ring_buffer_poll_deliver(config, buf, chan, handle)) { |
| 2543 | lib_ring_buffer_wakeup(buf, handle); |
| 2544 | } |
| 2545 | } |
| 2546 | } |
| 2547 | |
| 2548 | /* |
| 2549 | * Force a read (imply TLS fixup for dlopen) of TLS variables. |
| 2550 | */ |
| 2551 | void lttng_fixup_ringbuffer_tls(void) |
| 2552 | { |
| 2553 | asm volatile ("" : : "m" (URCU_TLS(lib_ring_buffer_nesting))); |
| 2554 | } |
| 2555 | |
| 2556 | void lib_ringbuffer_signal_init(void) |
| 2557 | { |
| 2558 | sigset_t mask; |
| 2559 | int ret; |
| 2560 | |
| 2561 | /* |
| 2562 | * Block signal for entire process, so only our thread processes |
| 2563 | * it. |
| 2564 | */ |
| 2565 | rb_setmask(&mask); |
| 2566 | ret = pthread_sigmask(SIG_BLOCK, &mask, NULL); |
| 2567 | if (ret) { |
| 2568 | errno = ret; |
| 2569 | PERROR("pthread_sigmask"); |
| 2570 | } |
| 2571 | } |